Am i missing something obvious, or do i need some extra software to use an mp3 as my alarm tone?
Cheers guys
In WM5 you can only use MP3s as ringtones, NOT notification sounds.
You need to convert your sounds to .wav format then put them into the /windows folder on your device in order to allow them to be visible in alarms and sounds¬ifications.
Alternativly update to WM6 and you can use MP3s for all sounds.
I added an mp3 to the windows folder but it doesnt show up in the combo box
for WM6
/windows = built-in alarm, support wav only
/windows = sound and notification, support wav and mp3
/windows/rings = phone ringtones, support wav and mp3
for WM5
/windows = built-in alarm, support wav only
/windows = sound and notification, support wav only
/windows/rings = phone ringtones, support wav and mp3
Mp3 Alarm Tones off SD Card?
Is there a way in WM6 to use Mp3's off the SD Card with out moving the Mp3's to the windows root? If anyone has found a way please let me know been looking for a while....
takaki said:
for WM6
/windows = built-in alarm, support wav only
/windows = sound and notification, support wav and mp3
/windows/rings = phone ringtones, support wav and mp3
for WM5
/windows = built-in alarm, support wav only
/windows = sound and notification, support wav only
/windows/rings = phone ringtones, support wav and mp3
Click to expand...
Click to collapse
What about WMA files as ringtones and notification sounds??? Is it possible to use them with wm6?? If so, where do they need to be put on the device or what reg key needs to be changed to work off the sd card. Thanks!
I've got a new .wav file in \windows and it is showing up in the alarms dropdown but whwn I select it the value will not persist ('flicks' to previous in list). Do the file properties need to be anything in particular and if so how is best to change them. Or is it something else?
K
osker-xda said:
I've got a new .wav file in \windows and it is showing up in the alarms drop-down but when I select it the value will not persist ('flicks' to previous in list). Do the file properties need to be anything in particular and if so how is best to change them. Or is it something else?
K
Click to expand...
Click to collapse
Not to clear on what your asking.
Because I don't know what your running on your PDA? (OS, ROM etc.)
A little History is always helpful..
Did it ever work before?
I'll take a stab at it... I'm assuming you have WM6 as the OS and you have a hermes
From what you wrote, you have a new wave file and it shows up in the drop-down list but goes back to the default alarm tones, and that your new wave never engages, not even during the test?(where you selected the alarm tone)
I can suggest a few things:
~Try locating your wave or mp3 clips in: My Device\Application Data\Sounds
(This worked great for me, I was able to use the files here as ring-tones and alarms)
~Check to make sure the file is not protected, read only or hidden
~Try a smaller wave file at a lower bit rate (More or less as a test)
~Try converting the wave file to mp3
Hope this helps!
Good luck!
jac said:
Is there a way in WM6 to use Mp3's off the SD Card with out moving the Mp3's to the windows root? If anyone has found a way please let me know been looking for a while....
Click to expand...
Click to collapse
Would love to know this myself. Thought I'd been using some off my mSD card before upgd'ing to WM6, but am not able to make it work yet in vp3G's AT&T ROM.
jac said:
Is there a way in WM6 to use Mp3's off the SD Card with out moving the Mp3's to the windows root? If anyone has found a way please let me know been looking for a while....
Click to expand...
Click to collapse
You can use different 3rd party apps, i.e. enAlarm as alarm clock, photcontactspro for ringtones and sms.
BUT:
As the card is not responding that fast as Ram there is a chance for the so called SOD (sleep of dead) if your device is in power save mode. The alarm goes off or the phone is ringing, the application is searching for the sound file, but the card is not ready because of the power save mode. The application is confused - black screen - sleep of dead.
I recommend to save all sound files for ring- alarm- and sms tones in the main memory.
ok i figured out how to make the mp3 into the alarm tones. basically the file size must be around or less than 600 kb, and in wave file. if you have an mp3 convert to .wav, and change the quality. for me, i used PCM 11.025 kHz, 16 Bit, Mono, but its dependant on the size of your song file. you can use your sound recorder to make these adjustments.
Related
HI,
Please, How to set an mp3 file as a ring tone to the Magician?
Thanks,
Dear Friends,
I cant believe 77 viewers, with no single quote? unless my question is a stupid one !!!
Any guide line?
thanks alot.
just download this and install at Magician.
Rothstein said:
just download this and install at Magician.
Click to expand...
Click to collapse
THANKS ALOT MASTER.
IT WORKS VERY WELL.
Not working for me. Installed, no error messages, but I still can't use mp3's as ringtone. Actually in file manager mp3's are not associated with any programs. Could someone give any help?
you dont need anything to set a .mp3 as a ringtone, just place the mp3 file in the rings folder under windows and go to the tone selection screen and it will be there.
PLACE MP3 FILE IN FOLLOWING FOLDER
\\My Device\Windows\Rings
then do this
Start>Settings>Sounds & Notifications>Notifications(on bottom)
Then Event:.. scroll down to Phone: Incoming Call then tap the drop down box by ring tone and it will be there.
There should deffinately be a FAQ sticky for this kinda stuff
windows moible second edition supports mp3 as ring tone by default
alix776 said:
windows moible second edition supports mp3 as ring tone by default
Click to expand...
Click to collapse
I Have Windows Mobile 2003 (Second Edition) Version 4.21.1088 (Build 15045.2.6.0)
BUT I can not set mp3 file as a ringtone without the above software.
fone_fanatic said:
you dont need anything to set a .mp3 as a ringtone, just place the mp3 file in the rings folder under windows and go to the tone selection screen and it will be there.
PLACE MP3 FILE IN FOLLOWING FOLDER
\\My Device\Windows\Rings
then do this
Start>Settings>Sounds & Notifications>Notifications(on bottom)
Then Event:.. scroll down to Phone: Incoming Call then tap the drop down box by ring tone and it will be there.
There should deffinately be a FAQ sticky for this kinda stuff
Click to expand...
Click to collapse
So it can't be done without placing the mp3 in the ringtones directory? In deed it's not working for me that way either. I can see the mp3 on the list, but after choosing and pressing an OK, it sets itself back to windows default. Actually I can't use anything else than windows default. I'm really getting mad, plz help! Where is the file associations menu? Maybe there's some problem there. This thing is messed up since I've installed and uninstalled winamp...
Work great on wm2005 1.60b
Man i dont know is if its the program or the windows itself..but under the settings of notifications all my mp3 is listed ..which i never knew!...this is GREAT!
AMD
Work great on wm2005 1.60b
Man i dont know is if its the program or the windows itself..but under the settings of notifications all my mp3 is listed ..which i never knew!...this is GREAT!
AMD
It would appear that by default mp3 ringtones are allowed, however once you install a third party app to play mp3's (you mention winamp) you lose the ability to use them(it seems that the Media player engine is used for this).Uninstalling the app makes no difference, you then have no mp3 player because the mobile version of windows does not restore the file association. The best way round this that I have found is to simply use an audio app (Nero wave editor in my case) to convert/edit the mp3s to wma. This has the bonus that most mp3 tracks are too long for a ringtone (how many phones ring for 3-4 minutes without kicking in the answering service ?) so when you convert you can also reduce the length.
I cant comment on the set ringtone cab posted here, never tried it, it may work
HTH
I am able to install the cab file without any error message but still can't use mp3's as ringtone. The mp3 file appears in the Sound and Notification drop down list, but whenever I select the mp3 file and try to play, it doesn't play and return back to Windows Default ringtone. Can anyone tell me that what is the problem?
cool_paki said:
I am able to install the cab file without any error message but still can't use mp3's as ringtone. The mp3 file appears in the Sound and Notification drop down list, but whenever I select the mp3 file and try to play, it doesn't play and return back to Windows Default ringtone. Can anyone tell me that what is the problem?
Click to expand...
Click to collapse
The same problem I have. Also I don't think so that the easiest way to solve it is to convert each of my mp3's to wma or whatever. Somehow there should be a way to restore the file associations. Maybe if someone would have a media player to install (re-install) that could solve it. The problem is that I've also lost my former ringtones.
Have a look at this thread here. Ive just downloaded the files but not tried em yet. Seems to be able to restore file associations so that WMP becomes your default player. This should then allow you to use mp3's as ringtones
http://forum.xda-developers.com/viewtopic.php?t=27269
cool_paki said:
I am able to install the cab file without any error message but still can't use mp3's as ringtone. The mp3 file appears in the Sound and Notification drop down list, but whenever I select the mp3 file and try to play, it doesn't play and return back to Windows Default ringtone. Can anyone tell me that what is the problem?
Click to expand...
Click to collapse
GO TO START/SETTING/PERSONAL/PHONE (AND SELECT YOUR MP3 FROM THERE).
CHEERS,
YAARUB
So the file associations are normal again, thx to your help. But how can I set an mp3 as ringtone which is stored on the sd card other than copying it to the ringtones folder as it takes far too much space from the main memory? The settings-ringtones does not find the mp3 files either on the sd or in the system memory, only wavs and mids.
@Szilu
I'm afraid there is no other choise but to copy the mp3 ringtone to the main memory.
Im sorry
That's a pity. Anyway can you suggest any programs then to cut mp3's to smaller pieces? As 4 minutes is far too much thus the size can be shrinked. THX for your kind help.
Try "Sound Forge", But im not sure if it support mp3 files or .waqv only, their you can cut the file to small pieces.
good luck.
How come when I put a mp3 files in my ring tones folder it won't play. Does this need to be a wav file?
If so, i don't really want a 35MB file to play my ring tone.
Thanks
jw
I have a mp3 as ringtone, though I use PZP, but as far as I understood, PZP just changes the standard settings of WM, so it should be possible without PZP too... maybe try a different format of the mp3?
try putting them in your my documents folder. thats where i have mine. I actually made a my documents folder on my storage card, but it sometimes switches to the default tone when it rings from standby. i think its because it starts to ring before it powers up the card again.
Firstly, 35MB wav is like a 2 minutes sound. Do you actually need a 2 minute sound for your ring tone? How long does it takes for you to answer your phone?
Anyway, try compressing it to WMA. You definately can use WMA files for your ring tones. Get the encoder free from M$.
hi @jw,
i guess ur problem caused by third party music software which they assign their program for ur default music file.
how to check it...??? go to file explorer, and see the display icon / play the file for ur mp3 file which u want to assign 4 ur ringtone. does it in WMP's icon and also plays in WMP? if NO, go to ur third party music software and unassigned/uncheck mp3 files format as a default program to play those formats.
because as i know, the device plays mp3 format for ringtone using WMP's system.
i hope this can help u. Gut Luck!!!
Quick & Easy way
You can make MP3's as ringtones easily.
Use File Explorer to locate then file, then press & hold with the stylus (or finger) until you get the options menu.
Hey prestu - Use as Ringtone will be there. Well it is on my phone anyway...
Thanks for all the help guys!
hi, y can't i set ringtones for alarms or text msgs, thanks
Is it possible?
oyeah once you convert it to wav :roll: methinks
laca4025 said:
oyeah once you convert it to wav :roll: methinks
Click to expand...
Click to collapse
what are you talking about ? Jamin can use mp3's as ringtones - you don't have to convert them to WAV !!!
wav it's the only supported format for WM5?
And what about wma files in windows directory?
I don't understand guys....
I've mp3 file and I'd like to use it as ring tone end/or alarm sound.... can you explain me where I have to put it to be inserted in the sound and notifications list?
You can easily use an MP3 as a ringtone... all you have to do is put it in the folder: Windows/Rings and then you can select it for any of your contacts... alternatively, just click and hold on the MP3 and one of the menu choices is 'Set as Ringtone' this sets your general ringtone as the selected MP3.
Just one little comment: If you are using MP3 for ring make sure they are small (not several MB like normal music) or you will get a delay before you here the ring (maybe several tones long). There are two excellent free apps I found that let you mold your MP3's to ring size:
MPTrim: http://www.mptrim.com/ it will let you cat the length of the file and increase volume if needed.
Second:
http://www.mp3-converter.com/mp3_to_all_converter.htm not only will this let you reduce the bit rate to make the files smaller it lets you re-encode files to and from many different formats.
Final note: You can also use files stored in your SD root (if you have one) but they are very slow to load, and you can use the sound from WMV files without separating it from the video.
Try to use Ringo Mobile from http://www.electricpocket.com/ringo-mobile/
: )
MP3 alarm?
Hi, do you know how to use mp3 song when the clock alarm rings? I tried putting into windows\rings but they don't show in the list for the alarm application. thanks in advance,
Re: MP3 alarm?
hatulz said:
Hi, do you know how to use mp3 song when the clock alarm rings? I tried putting into windows\rings but they don't show in the list for the alarm application. thanks in advance,
Click to expand...
Click to collapse
No Way!!
Clock alarm and SMS rings accept just wav files.Just put your wav files in Windows default folder
Many thanks guys! :wink:
Hi guys!
I've still a problem....
I justy put my mp3 in windows/rings dir but if I go to sound and notifications I can't see my mp3 in the list of rig tones...
I tryed soft reset too but the problem is still present.
I installed some sw like Photo Contact and Phone profiler ecc....
Now I have installed WMA Phone Profile and Photo contact (not Pro versione!). Is it possible that those sw can change some config on my Jamin?
Again. MP3 can ONLY be used as RINGTONES. They CANNOT be used for notifications (SMS, MMS, Clock,...).
To use MP3 as ringtones, you only have to copy them to the \Windows\Rings directory.
Enjoy!
Should be added that to select them go to:
Start->Settings->Personal->Phone
Ring tones
Curiouser and curiouser. After upgrading with Jester's 2.2 and installing Pocket Music, I cannot play mp3's as ring tones any more, but I can play .wav files. I can see them both, and both appear to open, but the mp3's are silent..... (both mp3's and .wav files are installed in Windows\Rings directory in this case). Last week the .mp3 files would play but not the .wav files!
.wav files installed in the Windows directory continue to behave as normal, appearing and opening as Notifications.
Can you still play MP3's with the built in WMP?
I suspect Pocket Music overwrote the codec for MP3 or screwed up the registry linking MP3 to it.
No idea how to fix this (short of hard reset though).
Yes, WMP still works just fine. No other impacts seen so far. So I'm happy enough, but would like to understand what happened.....
ok. stupid newbie question...
how do i change the sound my phone makes when a message beeps thru to anything other than the bloody voice saying "you have new message"
also the alarm? can i make it an mp3 or WMA?
thanks- only had the phone 2 days.
MontAlbert said:
ok. stupid newbie question...
how do i change the sound my phone makes when a message beeps thru to anything other than the bloody voice saying "you have new message"
also the alarm? can i make it an mp3 or WMA?
thanks- only had the phone 2 days.
Click to expand...
Click to collapse
Sometimes it helps if you use the manual!
thanks for your helpful reply!!
Dont you think i have read the manual from cover to cover- it doesnt say where i have to put the files for it to be used as the alarm tone or the message tone!!
THANKS
MontAlbert said:
thanks for your helpful reply!!
Dont you think i have read the manual from cover to cover- it doesnt say where i have to put the files for it to be used as the alarm tone or the message tone!!
THANKS
Click to expand...
Click to collapse
Ok ok, put in /windows/Rings folder on your device.
it seems that you can only use .wav file format, is there any workaround to use .mp3, .mp4 or .wma files? wav audio format is so big it will be a complete waste of memory, btw. for alarms sound you must copy wav to \windows folder
Did you know that actual size of predefined .wav files in windows folder is almost 2MB and you can't delete it?
banesi said:
it seems that you can only use .wav file format, is there any workaround to use .mp3, .mp4 or .wma files? wav audio format is so big it will be a complete waste of memory, btw. for alarms sound you must copy wav to \windows folder
Did you know that actual size of predefined .wav files in windows folder is almost 2MB and you can't delete it?
Click to expand...
Click to collapse
you can use mp3 and mp3 has smaller Filesize than wav. just use a good converter and use low bitrate. you can also cut mp3 files as you might do not want the whole 5th symphony for a ringing tone.
yeah- i got the ring tone to be changed to my favourite Hatebreed song but for the life of me cannot get it to change the alarm ring tone to something other than those included with the phone..... i used to have an edited mp3 as alarm tone for my sony-ericcson..... i am assuming this phone is better and can do that.......
any ideas to change the alarm tone?
thanks
Scott
saminegm said:
you can use mp3 ...
Click to expand...
Click to collapse
Yes for ringtone but NOT for alarms and sms, if someone know how to do it please xplain ...
G'Day Guys,
You need to use .WAV files bummer I know as they are generally larger but it is the only way to use them.
Convert your MP3 files to .wav with a program such as Ease Audio Converter:
http://www.soft32.com/download_15987.html
Once converted, connect your phone to the USB Sync Cable and let is sync.
Once synced go to >my computer>mobile device>my windows mobile-based device>windows and place your .wav file in the windows folder.
It should convert the file for mobile windows format.
Then in your phone go >start>settings>sounds¬ifications>notifications>events and select event, then associated sound.
or for alarm
>start>settings>system>clock & alarms>bell symbol and select sound.
I found that the sound file for the alarm cant be too long, at 17 sec it wouldnt work at 10sec it would................ Again I used "ease Audio converter" to clip the length of the wav file.
Hope this helps, spent many hours delving around on the net finding the answers.
Regards,
BIQ
can this be stickied or put in the wiki under common problems with the Trinity? just an idea
LightInsomnia said:
can this be stickied or put in the wiki under common problems with the Trinity? just an idea
Click to expand...
Click to collapse
This is nothing to do with the Trinity as such- it is, and has been, universal with all Pocket PC/ Windows Mobile devices.
As the previous posters have said:
Ringtones can be WAV, MID, WMA or MP3 and need to be in the Windows/Rings folder. Later devices have other permissible locations, but Rings is univerfsal.
Other notifications must be WAV files, and preferably need to be 25KB or less. These need to be in the Windows folder, and are selected via the Settings/Sounds and Notifications control panel.
You can use MP3's as alarm, SMS and messaging tones, but you need add-on programs- SpB Time /Chronos etc for alarms, Ringo Mobile for SMS & Contacts etc.
Hi there,
i have search in the full device, but i can't set one of my ringtones for text message notification except the stock htc ringtones, and i can't find a menu to set a ringtone for the Alarm ( my wake up morning alarm for example)
is there something i missed , or an application to manage this ? or may be there is a method to save ringtones ( size , format, during time of the audio file)
if somebody knows it will be great .....
Charles
for the ringtone for messages you need to go to Application Data\Sounds and paste your ringtone there. (MS makes it easy for you right? --> NOT)
setting the alarm sound can be done via start->settings->system tab-> clock & alarms.
From there on you can click on the alarm bell to select a sound.
As for the alarm, i'm figuring out that one myself. It seems no .mp3 can be used for the alarm sound. I think it needs to be a .wav file.
If anyone has a solution for the alarm, please post!
Use a great program on my xda2i called Alarmtoday. It's excellent, but today screen based... unsure how it'll work with tf3d.
I have also heard someone tout a program called ptravel alarm. I'm getting my HD early this week and I WILL be working on this so i'll keep watching this thread.
thanks for the path ...i will try for the text message sound ......
regarding the Alarm sound choice , it's really amazing that you don't a menu to pick you favorite mp3 ringtone and make it your alarm sound .... i'm an old iphone user but a 8 years nokia user , and i always had the choice .....
.... hope you will find a way for this .....
Charles
the Diamond has a program called MP3 Trimmer which places the file in the right folder, i'd heard the HD had this program?
2unique said:
the Diamond has a program called MP3 Trimmer which places the file in the right folder, i'd heard the HD had this program?
Click to expand...
Click to collapse
yes it does
i'v tried with the wav file for my text message notification and it works if stored in Application data / sounds ...but i have shell32,exe error message .....
hummm not so good.
for the alarm issue: i converted an mp3 song of 3,5 mo in wav format and the result is a wav file of 35 mo !!!!! i think it's too big for just a sound file and i didn't try to store it and set ti as default alarm tone .....
seriously guys, check for a third party program like I mentioned,
I use ALARM TODAY and it is excellent. MP3 alarm is just one of many functions.
It needs to be in "wma" format, if you want to assign your own sound to the text/mail alerts its has to be "wma", iv tried "mp3" and "wav" but it never worked. "wma" worked for me.
Thanks for the tip ..... i will try in wma file format ......
i don't want to use many third party programs..... the device is unstable with lot of stuff installed on it ...i want to learn how to use the WM6 goods but it seems to be complicated for some simple things !!!!!
MS needs to hurry with their WM7..... it's not acceptable that setting a ringtone or messagetone is this difficult. I would have expected that if i choose the property of a mp3 i can use that mp3 to:
- set as ringtone
- set as messagetone
- set as alarm
- set as ...
How hard can that be?
i totally agree ...... i don't understand why this kind of device can't do what can do a 25 euros nokia phone .... it's nonsense .....
i've been using a program called audacity for my ringtones and for my messages.
Under 'My Documents' there's a 'My ringtones' folder - I threw all mine in there, although it seems that you dont necc. have to (have to say, it's much easier/better organised on WM6.1 HD - it was a little awkward on the Cruise)
It seems no .mp3 can be used for the alarm sound. I think it needs to be a .wav file.
If anyone has a solution for the alarm, please post!
Click to expand...
Click to collapse
I didn't know that - although - it has to be said that the alarm program in WM is retarded. I use my phone as my daily alarm clock, have for years - there's no PRACTICAL 'snooze' option in WM - anyway, my solution - SPB TIME - works like a dream (pardon the pun...) and the snooze buttons are nice and big enough, even for my sleep fogged brain...
ringtone alarm problem
Hi
I found the solution of problem ringtone alarm
You have convert sound files to wma format and copy in windows folder
Disconnect USBcable and happy this!!
Sorry my english
ringtone/alerts
i have been converting and using my own ringtones and message alert tones for a while now,
mp3 files work as ringtones if you put the trimmed down version (as only 30 secs is useful) in the /Windows/Rings folder
the message alerts and alarm alerts you need .wav files placed inside the /Windows folder itself.
i just use copy and paste from my PC in active sync mode to put the files there and then use the 'Sounds and Notifications' to assign them.
i use smallest wav file ie 5/6 sec for the alerts but longer versions could possibly work..
thanks
i have made a cab file with a few tones and each of these tones will be installed into the correct place for you to choose under the right heading
www.ourhtc.co.uk/l6cum tones.cab is where i have uploaded it to (7.5MB)
contains approx 5 ringtones and 4 alert tones
rather than using the phone memory for ringtones and other tones, u can create a "My Documents" folder on memory card and put all your tones inside there be it mp3,wma, wav or any other format the phone supports, then select them from "sounds and notifications"
http://forum.xda-developers.com/showthread.php?t=466760
For calls:
Can place wma, wav, or mp3 in \My Documents\My Ringtones
Or:
Can place wma, wav, or mp3 in \Windows\Rings
For other sounds / alerts:
Simply place wma, wav, or mp3 in \Windows Folder
if you create a "My Documents" folder on storage card, out all your tones inside there, be it ringtone tone, mms tone, sms tone or even activesync tone, which is wat i did i added a modem dialup tone to active, all coming from the storage, i can more a less guarantee that they will work from storage card even its its wav the phone will pick it and use where its required. personally i wouldnt use the phone storage for any tones
jim256 said:
For calls:
Can place wma, wav, or mp3 in \My Documents\My Ringtones
Or:
Can place wma, wav, or mp3 in \Windows\Rings
For other sounds / alerts:
Simply place wma, wav, or mp3 in \Windows Folder
Click to expand...
Click to collapse
iky10 said:
if you create a "My Documents" folder on storage card, out all your tones inside there, be it ringtone tone, mms tone, sms tone or even activesync tone, which is wat i did i added a modem dialup tone to active, all coming from the storage, i can more a less guarantee that they will work from storage card even its its wav the phone will pick it and use where its required. personally i wouldnt use the phone storage for any tones
Click to expand...
Click to collapse
I'm not debating that, it's just that there seems to be a lot of confusion and I am positive that the method I posted works...although it is probably better / faster to store tones on the device as data in device memory is faster read then data on the card.
The tones take up SO little memory that...there are no advantages to storing on the card, but you may have slight ringtone delays (disadvantage) if you store on card.