Can't write to storage card? A little help? - 8525, TyTN, MDA Vario II, JasJam General

I was trying to put a movie on my storage card and I keep getting the message that 's write protected. I'm using a Micro SD from my AT&T 8525 w/ an SD adapter and my internal card reader on my Dell XPS desktop w/ Win XP.
Does it have anything to do w/ that it's a 400MB file i'm trying to copy. This is just frustrating.
Any help would be appreciated.
Thanks,
Mark

Unrelated question: anyone know why i have the little fido.ca thing next to the american flag in the upper right corner of my posts? if you rest the mouse over it it says "Albania - Albania Mobile Comms" The funny thing is, I happen to be Albanian but I'm not sure how xda would know that.
Random - sorry.

AximMarkSD said:
Unrelated question: anyone know why i have the little fido.ca thing next to the american flag in the upper right corner of my posts? if you rest the mouse over it it says "Albania - Albania Mobile Comms" The funny thing is, I happen to be Albanian but I'm not sure how xda would know that.
Random - sorry.
Click to expand...
Click to collapse
We know everything!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Change it to correct phone carrier in User CP
Mike

AximMarkSD said:
I was trying to put a movie on my storage card and I keep getting the message that 's write protected. I'm using a Micro SD from my AT&T 8525 w/ an SD adapter and my internal card reader on my Dell XPS desktop w/ Win XP.
Does it have anything to do w/ that it's a 400MB file i'm trying to copy. This is just frustrating.
Any help would be appreciated.
Thanks,
Mark
Click to expand...
Click to collapse
That is a big file for the 8525, Still that does not explain the problem. I have seen this reported before, but I do not recall a solution. Theories about sector size etc etc.
You could try copying the contents of the SD temporarily to PC. Reformat the disk and try again. You could also try via active sync if you have a great deal of patience!
Mike

Related

XDArit - read error from SD card?

Hi !
i tried to read my saved 3.14-ger rom from my SD card (saved as boot+ce)... but XDArit (new version) says: Did not find correct flash signature, aborting!
Why ? what did i do wrong?
Jabba
what does it display in the first page ?
does it start with 'HTC$WALLABY' ( if so what number follows? )
or does it say 'FLASH KEY'
or does it say 'FAT16'
nothing was displayed.
was very weird... i installed some win2k-drivers on my winxp for the sd-card, now it works !
my one see FAT16 it not 'HTC$WALLABY' WHAT I MAKE WRONG >?
WHAT ARE U MORE INSTALL ON TO XP ? PLEASE TELL ME I NEED TO FIX THIS PROBLME TOO
if you see 'fat16' that means your sd card is still formatted for normal use.
after xdarit or your bootloader have written data to your sd card,
you will see 'HTC$WALLABY' in the first bytes.
the 'FLASH KEY' is what you would see with bootloader 5.17, I am not sure
if xdarit supports this correctly.
I didn't need to install anything on XP, I just plugged a usb cardreader
in my pc, you see some popups about windows finding new hardware, and drivers. and after about 1 minute it worked.
the new ver 1.2 of XDArit.exe
when i use it Write a image to sd card,it 's return a error
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Same Here
I get the same message in XDArit.,
Also. recently installed the latest program A update 3.17 from O2 to my UK XDA all went well, then (before I discovered this website!!) I foolishly (it now seems) went to the Program B uprade. this hubg up in mid flash!!
Now my poor XDA is in a sorry condition does wird and wonderful things, random backlight on off, responds to ocasional button pushes.
where can I get the GSM ROM to flash into it?
I also receive XDARite error with version 1.0.2.....
I have tried three different card readers and all of them give me this error....
Todd

HTC hero bricked .help.....

I bought my HERO just a few days ago.
Once,the system halted and I took the battery out of the phone.
After that,when I turn on the phone,it show the first picture in the attachments
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
and then only when I press the DIAL button ,the phone responses,and it shows the second picture in the attachments
I have checked that the buttons of the phone are all OK.
And I have sent it to someone to mend it,he said that the phone can not be connected to the computer,but he succeeded in flashing it with the miniSD memory card. BUT the phone still has the same problem.What's more ,the H-BOOT has been flashed by him from 1.76.005 to 1.76.007. But the problem still
exist....
Can anybody help me?...
And I'm from China,my English is not very good...
This might help...
g0mib0y said:
EDIT: DON'T UPDATE TO 2.1 AGAIN SINCE IT WILL HANG ONE MORE TIME. WAIT FOR HTC TO RESOLVE THIS ISSUE!!!!!!
EDIT 2: BACK UPP ALL YOUR DATA FROM YOUR MEMORY CARD FIRST!!!
EDIT 3: How did I find this out? I talked to a very helpful HTC suport rep (yes they do actually exist in Sweden). He helped me do these steps and so I thought I should share this.
Ok so you got a message that 2.1 was available for your Hero - FINELY! and you installed it using OTA. And then you got a triangle with a ! in it and you rebooted and all it says is "HERO".
This is how to solve it!
Take out your memory card. FORMAT TO <span style="font-weight:bold;">FAT32</span>!!!
Download the RUU 2.73.405.5 from HTC support homepage
Run the installation.
When it fails to find your phone <span style="font-weight:bold;">DON'T EXIT!!!</span>
If you are using Windows 7 go in to c:\Users\<span style="font-style:italic;">yourusername</span>\AppData\Local\Temp
Search for ROM.zip
Move to desktop
Rename to HEROIMG.zip
Transfer to your newly formated memory card now with FAT32 file system
Put memory card into phone
Start phone holding volume down pressed.
It will now check zip fil and then ask if you want to install.
homekey for YES
After installing you have 1.5 again and can safely upgrade to 2.1 OTA
Click to expand...
Click to collapse

Error installing android ...

Haret photon 7227 is not possible to open the file...?
rui_sandra said:
Haret photon 7227 is not possible to open the file...?
Click to expand...
Click to collapse
try with a hammer...
or read [TUTORIAL] Install Android on HTC HD Mini
I followed this tutorial but from this error ...?
Thanks.
If you want Android on your phone HTC HD Mini, Download the Cotulla's Android 2.1 and you extract the files.. these files will are together and you bring them to the root of SD card and format with FAT32 before bringing files, And when you want to start android tap on named HaRET, That is it, and if you see doesn't work it's because if SD is not enough fast or bad SD.
This files isn't about open file or something else, it's only boots to Android Operation System
Please everyone before asking, see the page, you see it, just ask about haven't asked yet....
iPlasm said:
Please everyone before asking, see the page, you see it, just ask about haven't asked yet....
Click to expand...
Click to collapse
Before I ask any questions I have read and did everything in this tutorial but it's always error opening the photon Haret 7227.
You must be the most intelligent of the forum, you should know everything.
Thanks.
Well then, Well done if you did read all of it.
We will like to know all the problems of this android, but not always same, and explain full your question, I mean.... for example what do you mean error of this?? you mean when you tap on HaRET shows you error or something?, so here you must say i have bring files to SD also to know us what have you did.. As the page of Android mini... you see some questions are same...
I think i have the same problem , after i had clicked on HARET there comes the sentences : HaRET: Booting Linux. and this is on my screen and then i must take my phone off
This is my problem.
Thanks.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
rui_sandra said:
This is my problem.
Thanks.
Click to expand...
Click to collapse
lol .......
Because your SD Card is not signed with a trusted certificate & So it's fails to load. so maybe you formatted by Computer's Format Tool.
And There're two ways to fix this, just do one of them: number one is easier, but number two can be formatted with PC's anytime without this stupid certificate;
Number 1' Format your SD by the Windows Mobile Default one; (Start>Tools>Format SD) Done!
Number 2' Read this http://forum.xda-developers.com/showthread.php?t=720782 After these reading and doing steps you are ready to run HaRET.
And here will be Answered your Question! beside this question has been asked in the Cotulla's Android Page, but no problem... and You're Welcome
bye
Solved my problem.
Thanks.
You know where I can find solution to get ip address by wirelless (wi-fi)?
Thanks.

[Q] What's installed & how do I update it?

Hello
My girlfriend borrowed her dads HD2, and now it stopped working. She talked to him and most likely it requires an update of Android.
I'm usually pretty tech-savvy, but the language spoken on this forum is beyond my comprehension.
So, I have a HD2 with both win & Android installed. To boot into Android i need to go into windows and press two files on the SD-card: "CLRCAD" & "HARET".
The files look like this in Windows (pc):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Her dad mentioned Boxmax 6.5, so I found this thread:
http://forum.xda-developers.com/showthread.php?t=1100560
The files I downloaded from there looks pretty similar, aside from a few additions on the phone.
Downloaded the SD-one, but now i'm lost.
How do I update the phone? Just overwrite the files with the new ones or clean install? If it's a clean install, how do i do it? Do i need to backup something?
Backup all files on the SD card to a safe place (pc).
Delete folder Android on the card.
Copy the Android folder from the archive you downloaded.
Pop the SD card back into HD2, and start Android from winMo (clrcad, haret) or better yet install the exceller autoboot.
Thanks alot, sounds easy enough
When i pop the things back on the SD-card from the backup-folder, I still need to install all the apps and widgets again right?
Edit: Oh, and what about all her messages? Are they stored on the phone?
bolbronx said:
Thanks alot, sounds easy enough
When i pop the things back on the SD-card from the backup-folder, I still need to install all the apps and widgets again right?
Click to expand...
Click to collapse
Yeah, you usually use titanium backup, heh.
sent from my phone using my fingers
Thanks so far for all the help, I got it working fine except, and this might be a really n00bish question, how do I turn off the phone?
Nevermind, found Quickboot

NSTwG "testgossamer" factory partition folder?

I've been looking into the "factory" partitions of the Nooks I have in my family and on 3 out of 5 units I have noticed one folder (testogossamer) and one file (mfg_update.zip) more, that on the rest of the units. If I understand correctly, this is a quality control leftover. Am I right? Is it a common and well known thing? Or should I upload those files somewhere for others to see if there is something useful there?
This is a gallery of the .pgm (converted to jpeg for the online gallery) and .jpeg files that I found there and a screenshot of some of the others: http://imgur.com/a/Q05ca#0
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
thrackanomir said:
I've been looking into the "factory" partitions of the Nooks I have in my family and on 3 out of 5 units I have noticed one folder (testogossamer) and one file (mfg_update.zip) more, that on the rest of the units. If I understand correctly, this is a quality control leftover. Am I right? Is it a common and well known thing? Or should I upload those files somewhere for others to see if there is something useful there?
This is a gallery of the .pgm (converted to jpeg for the online gallery) and .jpeg files that I found there and a screenshot of some of the others: http://imgur.com/a/Q05ca#0
[image]
Click to expand...
Click to collapse
Wow, some of those pictures are really trippy!
how can I find this factory partition folder?
beesqp said:
how can I find this factory partition folder?
Click to expand...
Click to collapse
You can, for example, prepare the Noogie microsd card (burn the image on the card, however I am not quite sure that the term "burn" is proper in English for that). Then power on the Nook with that microsd inside and plug it into your PC. With a properly prepared Noogie microsd you should see a "Rooted Forever" screen on the Nook, and all the partitions on your PC available to see.
One of recent topics reminded me about this, and I finally got to upload those unusual files. For everyone interested, they can be found here: https://mega.co.nz/#F!bxRmEbwC!DK3iJWyFfwBTwa-SEv0DzQ If anyone know how to run tests connected with all those result message pictures, I would be very grateful for an explanation.

Categories

Resources