Hello,
On most phone when you get an SMS with a phone number in it, you can allways underlined the number and then push CALL BUTTON and call this number
Example : hello John, call Suzan at 0123456789
and then 0123456789 will be underlined and you can call this number
Is that possible on Magician ? Anyone know a trick ?
Thanks guys
Wow! This is so old problem but so important for me. Are there any solutions now?
You can draw a line on the screen with a Gel-pen.Then write it to a paper.Then dial it!
HAHA,just joking.
Universal
I have the Qtek 9000 and it has the feature. I'm not sure if it's a WM5 thing or just a Universal thing.
It's a feature that Microsoft added only with Windows Mobile 5.
You won't get it with older versions of the Messaging app.
With my XDA and XDA2, I just used to drag over the number, Tap+Hold, and choose Copy, then Edit/Paste into the Phone app.
No other way, unfortunately.
Hi-
My problem is when I search and find the contact on Smart Dialing and use the enter button on joy pad, the program running PI (PI is my default PIM) however, I have not found a solution for how can I close PIM afterwards...
These are my steps,
Run Smart Dialing and search a contact
When it finds a contact push enter button on joy pad to run PIM
finally how can I close the PIM........
Any comments much appreciate..
Hi,
I was wondering if anyone would have something like this:
One of the thing I miss most on my other pda, a treo 650 is an utility that allowed us to dial a number just by selecting it in an event.
For example:
Meeting with X - 93 99999999
By puting the cursor inside the number and pressing a special key or the phone button it would ask us if we wanted to dial that number.
Does anyone konw of any thing similar to this?
Regards,
Jose
in the notes section of the meeting type the telephone number as follows:
tel:xxxxxxxxxx
it should automatically turn it into a blue link when you press enter or space. Hit OK (top right) and now when you open the meeting to view it you can tap on the number to dial it.
Now THAT is a great tip. Thank you!!!!!!!!!!
Thanks
Thanks it works lika a charm
Just got my new Orange M3100 (Tytn) and I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Also trying to do similar with Bluetooth settings as I swap my BTheadset between phones just as frequently. I have found a link on this site to a utility to do that but not had chance to try it yet...
Can I just make a shortcut to that as well ??
Apart from that it appears a excellent device, running Tomtom etc without any problems....
Thanks in advance Phil
All the ways I tried to create such a shortcut do not work, because it requires an USSD "call". I asked WM5NewMenu author to implement USSD handling, will see...
For now the best solution I've found is to assigh speed dial keys in the dialer to USSD sequencies to divert and cancel diverts. It's OK for a while because speed dial keys can be easily accessed with one hand only (green phone button, then arrow left or down).
EDIT: In case you don't know USSD sequences... You'd better consult your operator to be sure. For me:
Divert all calls: **21*number_to_divert_to#
Cancel divert of all calls: ##21#
There are also codes for conditional diverting, of course.
Hi Phil,
What Lurker0 has mentioned is a good idea. You can save those strings as a number in a contact and maybe assign a speed dial or voice tag to that contact for speed? I guess one contact to enable and another to disable. The commands Lurker0 mentions are standard over all networks.
I'm not sure if there are ways to send AT commands to the modem in the TyTN (M3100) but it is another possible way to do it if someone knows how, if not then it might be useful info to someone else.
The AT command you need to send is AT+CCFC=1,1,<number>,128,1,,, this is the number in local format (no +44) like 07968xxxxxx to enable and AT+CCFC=1,0 to disable.
Gavin.
Phonealarm may be a simpler solution as I think u can add a forward number within a profile so just switching profile from the Today screen (phonealarm skin) would do the trick...
www.pocketmax.net
I've not had any dealing with the ATM commands so to be honest I wouldn't know were to start. I've just tried to install Phone alarm in my Orange SVP
M3100 but after asking me if I need and extra language the software just locks up.. Soft restart then required....
I managed to find the directory that it was installed in, the setup prog is there but I can't find the executable file, I guess that it has not got that far !!!!
Any help please...Phil
I'd suggest to try USSD codes as the easiest and 100% working solution.
Tried the ussd numbers in the contacts list.... works very well both divert and cancel divert... Just need to setup the speed dial now, were is that manual !!
Thanks again.
Phil-w
Hi Phil,
Go into the phone skin (green button) > Menu > Speed Dial...
That's you...
Gav.
Speed Dial is also at "green phone button" then arrow left, or arrow down, or wheel down. So one hand operation is possible.
Many thanks to you both... Nice to find helpfull people on here... Phil
phil-w said:
I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Thanks in advance Phil
Click to expand...
Click to collapse
Phil,
I do the same and installed the O2Plus (and patch) software which tweaks the today screen and gives direct access to mutiple profiles for different forwarding options - works really slickly.
Check this forum for the .cab files
Hope that helps.
Rgds
Lifechanger
i tried putting the codes in a speed dial but Tytn unhelpfully said i had to enter the sequences in from the phone pad directly. all i did was put the **21*<no># in as a speed dial. did i miss something somewhere?
If you are rooted, start a shortcut to "Activities". Scroll down to "Phone", expand that, then scroll down to "Call forwarding". Select! Easy peasy.
Is it possible to add the feature of making a new appointment wth a contact from the phone application (call history or list)?
Try this.
CallCalendar.
http://forum.xda-developers.com/showthread.php?t=298279
thanks for the reply, however, this application does not do what I was initially thinking about.
I was thinking about having an "option" in the menu (phone or tap & hold) in the call history so I can make an appointment with the person that I tap & hold on.
Check out the Mobile Secretary source code and write your own.
http://blogs.msdn.com/windowsmobile/archive/2006/10/23/the-mobile-secretary.aspx
V
Link not Working
could you please give me another link? the link to the source is not working.