Hi just as the name of the thread suggests I am using synce on Feisty and have followed up a few HOWTO's to get my connection working but Unfortunately I can't because as soon as I connect, Authenticate .....
Then I drop out...........
It's really very sad anyone know why?
cheers
Did you use Bluetooth? If yes, it will not work, DUN profile is missed in Trinity
You can try this, good luck
I had a similar trouble, however I gvae up trying to get synce to work, and loaded XP in wmware, and use Activesync to do all my stuff, but I had to disable the tick in "Start->Settings->Connections->USB to PC" to get even that to work.
Now it runs perfectly in wmware, but still no synce.
vmware ---- sync
Yeah I gues it's a fix and I already have an Wexp image so I might settle for that
Cheers
But I haven't attempted the other suggestion from grym ------ but will try later when I finish my JEDI training......
Cheers
To andytof47 , I had the same issue and I've solved issue (drop connection), for WM5 or WM6 you should use package
"synce-odccm" instead of "synce-dccm"
Sorry for my poor English
Good luck
Related
hi forum...
I have an imate JJ & have been using it for 3 months now..
all of a sudden it refuses to synchronize with my laptop.
I tried the following but didn't wrk:
1) deleting the existing partnership.
2) uninstalling & reinstalling activesync.
3) tried installing both activesyncs( the one which came along in the cd & the one we have on our ftp).
4) hard resetted my device.
none of the above have solved the problem. my pc does recognize the ppc as a lan connection as it should. the activesync green icon in the taskbar also goes green && starts rotating, but it just keeps saying "Connecting" but never actually connects..
Please Help Me..
Thanx,
mOrph...
Hey,
Pune huh? Which part of Pune? I used to stay in Wanowrie Was a student at BVP Medical University.
Anyhoo, when you reinstall AS, make sure its on a drive different from the original install. Also make sure your firewall's are disabled (even the native SP2 firewall).
Hopefully, it should sync properly now. Let us know if it doesn't and we'll help you sort it out
Cheers.
Did you clear the notifications or something? If you used pocket mechanic or the like and delete one of them AS don't (& won't) work until you HR again, afaik.
Joe
that is correct. you can verify it by manually starting repllog on the PDA while ActiveSync tries to connect
joebongo said:
Did you clear the notifications or something? If you used pocket mechanic or the like and delete one of them AS don't (& won't) work until you HR again, afaik.
Joe
Click to expand...
Click to collapse
I screwed up my AS on my JasJar doing some foolish & ignorant cleaning with ScareyBear's CheckNotifications, but was able to re-enable AS using this tool (no hard reset needed)!
http://www.cs.pitt.edu/~jmisurda/ppc/blog/index.php?entry=entry051203-201515
Thanx all u guys
Hi guys.. thank u all for the suggestions... havent tried any as was out of town... will do dat n let ya guys know if it worked...
btw, am in aundh, pune
hi, this also keeps happening to me.. not being able to sync thorugh USB. I am using bluetooth since a copuple of days and since that no problems, no worries. Just use BT to sync. hope this helps.
HELP
hi u guys...
I tried syncing after disabling the firewall of XP SP2 but it didn't help...
what else can be done?
Syncing through bluetooth is not an option as my laptop has a builtin bt with toshiba drivers which doesn't allow me to sync. && i'd rather not overwrite the toshiba stack with the widcomm... don't wanna add a prob to my laptop to remove one from my ppc...
is there any foolproof way of getting back at syncing thru usb?
pls help
regards,
morph
Happend to me
I solved the problem by connecting ppc to a laptop usb,then connected back to my main macine and bingo
_^.^_
:-(
Guys...
Activesync still not happening...
Pls help
When I got this problem, it was due to synchronising something it didnt want to sync, namely favourites and web pages. Try changing your sync settings to say just contacts, then just calendar, then just tasks etc... and work down the list until you identify the problem.
I would guess its your favourites.
let me know, and we will commence a fact find and test process for alternatives 1 by 1.
Activesync problem
Open Activsync but Don't turn your XDA EXEC on before you plug in the USB. Let acivsync turn the device on then give it a minute to find the changes. Hope this helps.
Re: :-(
morphosin said:
Guys...
Activesync still not happening...
Pls help
Click to expand...
Click to collapse
Did you try installing the tool I linked to above? I've attached it to this post, it helped me restore AS when I somehow deleted it off my device.
I sync via bluetooth since i had those problems as well, and NO problems since then. Moreover, using BT is much much faster, at least for me.
recommend.
gotta love it when you try to help, offer multiple suggestions to some dude pleading for assistance multiple times, then get zero feedback as to the effectiveness of the fix (s) offered.
hey "morphosin" what was the outcome, all fixed?
simon_darley said:
When I got this problem, it was due to synchronising something it didnt want to sync, namely favourites and web pages. Try changing your sync settings to say just contacts, then just calendar, then just tasks etc... and work down the list until you identify the problem.
I would guess its your favourites.
let me know, and we will commence a fact find and test process for alternatives 1 by 1.
Click to expand...
Click to collapse
Sorry for the late reply dude...
I tried all possible solutions including your last given solution of trying to remove favorites... The problem is that On a fresh install of activesync, it doesnt even take me t the window where i choose my syncing options. It just keeps going green & round & says connecting. I manually tried to go to options through the menubar but everything except help is grey(disabled).
As for alnwick's suggestion.. I always have been doing that. Even on my Himalaya when i had Magneto, i used to switch off the device & let activesync wake it up.. It always helped but not in this condition... Dunno why... Its really sad that two M$ OS have so muchanimosity between em...
Is there any other solution that strikes u guys?
Hey Simon.. Really sorry buddy... I do appreciate all your guys help ALOTTTT... only problem is that my work hasnt been allowing me to be regular for last couple of days...
Thanx all for ur precious time....
Always
mOrph
PS : Problem not solved as yet
Hi,
I have the same problem with my Exec too. However it doesn't happen so often. Probably once in every 10 successful sync. I always managed to fix it using the "old-fashion" manner.
1. Unplug your USB from your Exec
2. Reset your computer
3. Plug it in again once your computer has finish booting the OS.
It is pretty basic and I guess that you have already tried it yet. It works for me all the time when I do so. Sometimes I wonder whether could it be the USB connector on the Exec that is faulty or my computer USB port or the cable.
Hope your Exec will be up and running properly again.
Regards,
Johnnie
johnnie82 said:
Hi,
I have the same problem with my Exec too. However it doesn't happen so often. Probably once in every 10 successful sync. I always managed to fix it using the "old-fashion" manner.
1. Unplug your USB from your Exec
2. Reset your computer
3. Plug it in again once your computer has finish booting the OS.
It is pretty basic and I guess that you have already tried it yet. It works for me all the time when I do so. Sometimes I wonder whether could it be the USB connector on the Exec that is faulty or my computer USB port or the cable.
Hope your Exec will be up and running properly again.
Regards,
Johnnie
Click to expand...
Click to collapse
Hey Johnnie...
Thanx alot for the suggestion buddy.. Unfortunately, i tried that long time ago... Also, in my case atleast it cannot be the h/w (USB Connectors on ppc or pc or the cable) as i used to sync absolutely fine with 100% hitrate. Infact, every time u have a problem try this buddy :
1) Go to task manager of ur ppc & turn off everything.
2) Switch off ur exec.
3) Attach cable & allow the activesync to wake up your device.
It might increase your hitrate.
For all the other kind souls here...
I am attaching a snapshot of how my activesync window looks while it is trying to connect.
Thanx All
mOrph
Re: :-(
galt said:
morphosin said:
Guys...
Activesync still not happening...
Pls help
Click to expand...
Click to collapse
Did you try installing the tool I linked to above? I've attached it to this post, it helped me restore AS when I somehow deleted it off my device.
Click to expand...
Click to collapse
Hi Galt...
I tried the tool you provided but that too was unsuccessful in solving the problem.
It really didnt gimme any options though when i ran it on my JJ. I assume thats how its supposed to work. It just showed me a white screen with two options
Exit & About...
Any other suggestions are absolutely welcome dude..
Thanx mOrph
I have similar problem: Activesync tries to connect and after some time it says, it could not connect.
When I make a reset with the reset button, it works again for some time.
hmmm, what could it be?
Hi,
today i found a new problem which alarmed me a bit. For all these days, I have been syncing my qtek9100 with my laptop using activesync bluetooth partnership. Everything worked great all the time - no issues.
today i just tried using the usb cable to sync. I can see that the moment I connect the cable to the phone, activesync recognises the phone and presents the authentication window and then later connects me to the phone. Great till here. But then, the pc activesync window shows "Looking for changes.." for a brief moment and then shows "Syncronizing.." and gets stuckup. On the qtek side, all I see is "Connecting" and thats it. I tried to be patient but nothing happens at all.
Interesting thing is that, with this USB cable connection the Tools->Add Remove programs and Tools->Explore Pocket PC work absolutely fine. I could install a software too, successfully.
Can someone tell me if I am missing some steps coz of which it doesnt sync when on usb connection ?
Very important concern is that, if I want to upgrade the ROM I need to establish PC<->qtek connection via usb. Since I am able to explore or install software when on usb, is it safe to go ahead with upgrading process ? (the fact that i am not able to sync using usb makes me feel my partnership is not setup properly enough for me to start the upgrade)
Can anybody guide me through this ?
Anup
I have the same problem with my brand new Qtek9100 (I received it just today). I think it's just a bug in the ROM (I am using the latest stable from the XDA FTP). I don't think there is much we can do, to be honest. My ActiveSync doesn't have such problems with any of my other 6 PDAs.
Firewalls?
Guys, are you sure it's not a software firewall ? I had the same problem. Even opened up the firewall completely and it wouldn't work. If I exit the SW firewall, it works perfectly.
Hope that helps, DBo.
Re: Firewalls?
davebo said:
Guys, are you sure it's not a software firewall ? I had the same problem. Even opened up the firewall completely and it wouldn't work. If I exit the SW firewall, it works perfectly.
Hope that helps, DBo.
Click to expand...
Click to collapse
Oh !!, well thats something I need to check out. When I go bck home today, let me check it. I dont have any other firewall software installed other then the one which came with windows xp sp2.
By the way, I just let the activesync run the whole night just see what happens, and in the morning, I was presented with this error.
0x80072ee2
The server could not be reached. This can be caused by temporary network conditions.This condition is generally temporary. Try to sync again later.
Click to expand...
Click to collapse
Let me see what more I can dig into. But with this situation, is it safe to upgrade the ROM ? I mean can I assume that my activesync partnership via usb is working properly and its just a sync issue ?
Anup
Hey guys,
Ok this sync is really bugging me, first it took me ages to work out why when i plugged it in the connection went green ina ctive sync and said connecting but wasnt working no matter how long i gave it - turns out it was a firewal problem,
but now when i plug in my wizard and the wizard says connecting under active sync but my computer active sync doesnt do anything, i tried switching usbs restarting both PC and Wizard to no avail, i know my PC is seeing somthing there because it says at first (when i plug into new USB port) found device etc etc, but then it installs it as a network connection and trys to aquire an IP/Network address from it!! that doesnt seem right to me!
Any advice would be great
Thanks
Nathan
hmm has anyone with a working active sync noticed if its installed as a network device for you? does the wizard work as a USB - GPRS modem? because that would explain that bit.
Thanks
Hmmm...
I'm gonna guess that no one is responding because you've basically said some things that lead everyone to believe you've not researched your device or problem before starting a new thread about issues that have been covered time and again.
First, by default Windows Mobile 5 (WM5) connects using the Network Connection method. If you want to use the old USB Serial connection your will need to upgrade to an AKU 2.2 or AKU 2.3 Rom.
Second, if you use the search function (see the top center of the screen) you will find numerous threads discussing several issues with ActiveSync.
Newbies are always welcome but you need to at least try to find your answers before just plopping donw a new thread.
Hi,
I did a search, and tried most of the suggestions, but i dont get this AKU2 thing? and couldnt find a deifnition.
but anyway im since broken the phone so thanks anyway guys
Check your vpn option and firewall option. If you using cisco vpn then uncheck "statefull firewall (always on)".
Hi Guys finally i get this nice device but it seem to don't like my MacBook..
For Sync i used the Missing Sync programm and all work Good but for going in Internet using my Trinity as a modem it NO WAY...
Who can slove this problem?
Have you try to use it as a Modem for an apple copmputer?
Thx a lot Guys!
Try this: go to Settings, Connection, USB to PC and uncheck "Enable advanced network functionality". This way the phone should be recognised as a USB modem.
(I don't have a Mac so I haven't tried this myself)
thx i try it but it doesn`t work!
I try on xP and i have the same problem!
BrigateGB said:
Hi Guys finally i get this nice device but it seem to don't like my MacBook..
For Sync i used the Missing Sync program and all work Good but for going in Internet using my Trinity as a modem it NO WAY...
Who can solve this problem?
Have you try to use it as a Modem for an apple computer?
Thx a lot Guys!
Click to expand...
Click to collapse
I certainly have been trying... the first thing that I find is that when I connect it to the Apple using the USB cable is that it doesn't recognise it. Has anyone had more success with this? The only problem is that I can't remember what happened when I first connected it - perhaps it asked me to set up a connection and I got it wrong. This is my first return to Macs in ten years, so I was a little overwhelmed by trying to get familiar both with it and with a new phone (Dopod D810).
If I did set up a connection... (!) then I think the connection is called "SerialPort-1", and the network report says that it is configured, but not connected. I don't seem to be able to delete it and start again. Maybe the Mac isn't even recognising the USB connection?...? Any feedback would be much appreciated!
This has been discussed many times - no DUN service with Trinity ...
But no problem going online with your MacBook. Make sure you update to the latest OSX.
Then delete old bluetooth connections to Trinity on your MacBook and reconnect using bluetooth
Then start Internet connection sharing on your Trinity - then click on the bluetooth symbol (top right) on your MacBook and choose the New Option connect to Bluetooth Pan (your owner name)
Hope it helps
Hi All,
I'd like to use my Hermes as an USB modem for my laptop. I have checked the net and found some articles about it.
But, it says that I have to use wmodem application on my Hermes. At this moment I have a HTC 2.11 ROM on it (I have changed my T-Mobile hungarian, because it was a piece of ****), and I can't found this Wireless Modem application.
Can anyone help me to solve this USB modem issue?
Modem Driver and Manual D838Pro
Thank you very much.
But I need the PPC WModem application, because it is missing from my ROM installation, or maybe I'm so stupid to find this.
can someone post the procedure or software in english for wireless modem for hermes!
thnks
wmodem is here http://forum.xda-developers.com/showthread.php?t=306041&highlight=WMODEM
This is how I do it.
I just connect it through internetsharing.
Disable Active Sync and see that you have a local network to your windows mobile. Just Start webbrowser.
Works great for me.
Hey!
I'm new to all these great programs, so could someone explain to me how to use the WModem, what I can do with it, and what it is for?
Thanks in advance!
Why bother when you can do it much easier with Internet Sharing. Just plug in the USB cable. Starting Internet Sharing and off you go.
Agree, using Internet Sharing is the best & easiest way to go!
o rly?
galaxys said:
Agree, using Internet Sharing is the best & easiest way to go!
Click to expand...
Click to collapse
im using the wm6 rom for htc universal...
tried using the internet sharing as the wireless modem is a bit complicated,
everytime i try it, i turn off activesync and then is says the device is not recognised and nothing happens... im on 3 mobile if it helps...
my friend has a mda vario 3 and his works jus fine on t mobile... any help?
I used the internet sharing in my hermes, but seems there is just one problem that is really irritating. Everytime, after connecting, I have to soft reset the phone because the disconnect button will not respond. The only to disconnect is through the gprs/3g soft bubble icon near the signal strength. After that when I try to start the internet sharing again, it will just not work. Anyone have the same experience?
Binyo said:
Modem Driver and Manual D838Pro
Click to expand...
Click to collapse
I try to use the PDA (WM5) as a modem for Notebook Vista powered, I need a specified driver, and different procedure?
With the driver available in CD OEM I cannot perform the connection....
thanks in advance