I have tried unlocking a wallaby with the instructions on Wallaby Wiki but keep having problems with a screen that appears that says that my phone is not connected and to check if connected. My phone will be connected and this is evident in that ACTIVE SYNC WILL BE RUNNING AND SUCCESSFULLY OPENING FILES. Why then is it telling me that I am not connected? Please help before I throw this wallaby and its computer in the dustbin
Related
hi to everyone,
i have a locked-SIM t-mobile phone edition which i tried to unlock using a serial cable & the manipulator.
the problem is that the manipulator can't find the device after scaning COM port.
i have checked that the port is not blocked by any program including the synchronization programs but there was no luck.
anybody knows what is the problem in my situation?
Be sure to press SIMULTANEOUSLY both power button AND reset with your stylus. This will bring your T-Mobile to WALLABY mode. After the screen reads GSM OK, connect the cable to your phone and PC and run manipulator.
This should work. I have the same T-Mobile and it worked with mine.
There have been posts with reports where people have had problems connecting to the pda because they have been using a laptop...
I unlocked mine on a SONY VAIO laptop successfully.
hi again,
i have tried the exact steps for unlocking but still the device wans't detected by the manipulator.
the synchronization program also can't detect the device if it is pluged using the serial cable.
could anyone please help me? i couldn't use the phone since 1 month.
Try 75656354
Wasn't there in any thread the hint to uninstall ActiveSync to get the manipulator to work?!?!
Search here in the forum. It wasn't posted as long time ago.
Or just try it when you uninstall.
I ment that there was a problem because active sync wants to connect to the XDA/MDA when connecting it to the serial....
Regards
LumpiStefan
Remember you must have the XDA in bootloader mode.
I have a Siemens SX56, locked to AT&T.
I downloaded the new 1.1 ROM, (Jeff's courtesy)
and began the upgrade.
It started, My SX56 said "Upgrading It will take about 5 minutes...."
Then,
I got an error message on my computer about com ports not being available, it lost the active sync connection, and now my SX56 is hung on the same message: "Upgrading It will take about 5 minutes....."
Of course, I'm unable to connect back.
Any suggestions?
I'm trying to be able to use it with T-Mobile.
I was unable to get any results by pushing the hard/battery resets.
Thanks!
"COM ports not being available"... Are you using ActiveSync via serial cable or cradle?
If you really cannot connect anymore, I guess you have to use an SD-card and the bootloader method to get back to a working state. But do try to reset the device and restart Programme A., it may just pick up again. I've seen that happen here once.
Try doing a soft reset then put it back in the cradle, the upgrade should restart automatically.
AlexF said:
I have a Siemens SX56, locked to AT&T.
I downloaded the new 1.1 ROM, (Jeff's courtesy)
and began the upgrade.
It started, My SX56 said "Upgrading It will take about 5 minutes...."
Then,
I got an error message on my computer about com ports not being available, it lost the active sync connection, and now my SX56 is hung on the same message: "Upgrading It will take about 5 minutes....."
Of course, I'm unable to connect back.
Any suggestions?
I'm trying to be able to use it with T-Mobile.
I was unable to get any results by pushing the hard/battery resets.
Thanks!
Click to expand...
Click to collapse
Hi Alex,
The same thing happend to me.Could you solve this problem?
If yes,can you pls.tell me: [email protected]
Brgds
rats
Were or are you using a USB hub? If so that may be your problem. The SD Card method works very well and very reliably. No comms outside of the device. I found many times whenn trying to do file xfers to the XDA that for no reason in the middle of transferring a file the connection would be lost.
I haven't had this problem with 2003 and AS 3.7.
USB Problem
Hi Alex and Rat,
i got same problem also, after step 4 my XDA screen become white and hang, if you already solve this problem please send me how to fix it this problem to [email protected]. Do you know how to install wallaby bootloader also.
I followed instructions (http://forum.xda-developers.com/showthread.php?t=244549), and I executed 3.17.03_ENG.exe after xdaunlock.exe failed.
My device is now unusable, some error occured regarding usb connection and now all I have on pocket pc is upgrading bar with 0%.....cant reset cant do anything?!?
Please help!
If I understand corectly I need to put boot on my sd card.....
look here
this might help http://wiki.xda-developers.com/index.php?pagename=Wallaby_HT_FlashSD
thnx....and....where can I find rom image?
http://www.romkitchen.de/
no bootloader on wallaby
hello again ,,to jay05 thxs for replying back but u dont seem to understand what i am saying i will say it more clearly hopefully someone can help ,
ok there is no bootloader on the device its been erased when i do a hardreset nothing happens so can someone please tell me how to put back the bootloader on the device ,,its impossible via sd card and when i connect it via usb cable all i get in my device manager is a usb device as"HTC USB SYNC"
ok so there must be software that can somehow flash this pda as the computer recognises it as a htc usb sync ,,i done a search on google and found several software that runs on similar setups like the treo but none for wallaby so please someone there must be a way to upload the bootloader back to the device via usb cable pls someone help me out i also tried the xda developer tool pnewbootloader no use nothing happens
there must some kind of special HTC software that can flash the chips on the pda similar to the jtag technique but thru usb as again i repeat my comp sees the pda as a htc usb sync
i hope someone can help
many thanks and a happy new year
Hi!
i was upgrading my universal's rom(downloaded from imate). And it said there was some connection problem, and asked me to restart the upgrading process but still it replied with the same problem. Now my Universal is stuck up on bootloader displaying serial and v1.01 . If you insert a usb cable it says usb v1.01. Nothing is happening if i restarting my device, SOME ONE PLEASE HELP?
Is this your first upgrade? Have you looked at any threads on upgrading? I direct you here... http://forum.xda-developers.com/showthread.php?t=290234
If you're still stuck after those posts, then please do post, but I think at this stage, the search button should really be the most useful solution
Dear..
You have just to install JASJAR_BL1.01_RUU_v1.2 (the boot loader) , and everything will be fine
1. connect your pocket to the computer
2. run the boot loader
3. click upgrade
4. restart your pocket
everything will be fine...
i have recently purchased this phone and it is currently locked to t-mobile. I am a canadian resident using rogers network. when i turn the phone on it says NETWORK IS LOCKED PLEASE INPUT UNLOCK CODE. I know this number is generated by the IMEI if i remember correctly..... i just dont know how to go about accomplishing this. also ...my computer isnt recognizing it VIA USB............ i am just so at a loss for what to do ...please someone help
oh yeah the IPL is 1.08 and the SPL is 1.08 when i get to the bootloader screen that is all that comes up
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
zabardast_1 said:
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
Click to expand...
Click to collapse
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .
zabardast_1 said:
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
Click to expand...
Click to collapse
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .
hoffmanbiker said:
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .
Click to expand...
Click to collapse
ok,
If there's a connectivity problem,there are a couple of things to verify it.First which windows are you using,if its winvista,you'll have problems,activesync doesn't work with vista,secondly its not recommended to work on vista.So get on with winXP and also get Activesync version 4.5 the latest.In activesync check the option 'allow usb connections' and in your phone goto settings---> connections and 'uncheck' 'establish all network connections' or something and then try to establish activesync connectivity.If still fails,than,
2. verify usb connectivity with pc, to do so get your phone into bootloaders mode (multicolor screen) by pressing and keep holding down the camera button and simultaneously push the Power On button,your phone will wake up and go into tricolor screen (Bootloaders mode)with ipl/spl showing in red colors.When in bootloaders,connect your phone with pc via usb cable,if a small usb appears at the bottom of the tricolor screen,then its has connectivity,but if doesn't appears,then you have a connectivity problem,so:-
a. either your usb cable is faulty,get a new usb cable and try again.
b. or usb input slot of your pc is not operating,try with a different usb input slot of your pc or even try out on an another pc.
c. Mini usb port of your phone is broken,get it repaired or replaced.
check out all these options and rectify the problem.
Cheers !
ok just to verify i am using wins XP and i have removed entirely activesync, reinstalled it checked to see if there is connectivity VIa boot loader and still it comes back that there is a usb malfunction is there ANY drivers i might need?
dude dont know about your unlocking problem, would be nice to hear that youv solved it... wouldnt it be nice if this world had no problems? but then saying that this forum would not exist... and troubleshooters wouldnt have jobs! lol
a) Unlocking NO...
b) active sync... Bluetooth... just rememberd you cant get in can you? to connect ia bluetooth?
email me privately on [email protected] and i may be able to help you if not ill find a way... a bit lost in the head (Attention Dissorder) cant focus...
sori
Sham