Related
Hi Guys,
I wanna share something i found out a while ago.
I am currently holding on to a Motorola HT820 and a BlueAngel and i was kinda playing around with it wondering why i cannot answer phone calls and only can play my MP3's. Here is the solution.
Install the A2DP Profile
Soft Reset
Pair it up to your BT Stereo headset using high quality audio
now, upgrade to build 3900.
Run the restartradio.exe
run the bt upgrade cab file
run the restartradio.exe
Now, pair it up to bluetooth handsfree headset.
This works wonders. It seems to work best on WMP10. I have tried
Mortplayer but, after i answer calls, it stops playing and does not resume.
For WMP10, it resumes fine. I have only tested on BlueAngel and HT820.
I dont have the luxury to get my hands on other devices as yet.
BT upgrade files found here
http://wiki.xda-developers.com/index.php?pagename=BA_Bluetooth_1.0.0.3900_Upgrade
A2DP details found
http://forum.xda-developers.com/viewtopic.php?t=25443
ENJOY !!!!
this currently works best on WMP 10
You can continue listening to music after your call ends with mortplayer,
you have to disconnect the pairing and re-pair again..
XDAII and Motorola HT820
Hey guys,
I'm contemplating buying a Motorola HT820 but I'm concerned that it might not work with my phone - I have an XDAII with WM2005 1.60A installed. anyone know anything?
Thanks and best regards...
Hi
This sounds like what I've been waiting for too.....
I have an XDA II running 2003SE will this work with this combo any ideas?
Good one... will try it later
Has anyone tried with Motorola HS 850???
Has anyone tried with Motorola HS 850???
So far, i have not tried it on XDAII... but i think it should work..
Can anyone confirm if this is possiable with an XDA II as having read through numerious threads on the subject of Bluetooth implementation with various Wicomm configurations, but cannot clearly identify that the A2DP Protocol can be successfully made to work on an XDA II.
I suspect that this can only operate on an XDA IIi or XDA IIs. My requirement is to get a set of Motorola HT820 Bluetooth Stereo Headphones to function with my XDA II via Bluetooth, I am not really worried about the Phone Headset function I would just like to hear Audio via Media Player 10.
Thanks
I have just upgraded to 1.40 ROM (iMate) with Orange EXT ROM on M2000. I have radio 1.13 and the A2DP profile loaded.
Everything was working fine with the old ROM and wmp9, but wmp10 does not respond to the pause, back and forward buttons on the ht820.
Does anyone have this working on ht820? Is there a known work around?
Motorola BT820 Audio Gateway and a player
I've followed the steps above and now have the two new profiles and have managed to pair my Motorola BT820's without any problems.
I've read that this works best with WMP10 but since I don't have this I decided to try Mortplayer.
Silly question : How do I get my XDAIIs to send the audio to the headphones ? Their is an outgoing connection between the two but the sound still comes out of the speaker on the XDAIIs.
If a phone call comes in then this is directed up to the BT820's
Help
Jason
i have done over 50 hard resets.. many tries and it seems to be an intermittend prob.
@woodrjh
In this way a HP Bluetooth Headphones and a Motorola HT820 works with my xda IIi in a2dp mode incl. the Buttons in WMP10.
1. remove the RunBT file from the Autostart dir -> softreset
2. Install the PDA2K_BroadcomCorp_BTUpdate.cab -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
3. Install the HP iPAQ Bluetooth Stereo Headphones Driver Update -> softreset
http://h18007.www1.hp.com/support/files/handheldiPAQ/us/download/22475.html
If the error \windows\btceavif.dll in use come, rename it with Resco File Editor and try again the driver update.
4. Put the the RunBT file back to the Autostart.
cu bülo
does this method enable your bluetooth headset to receive calls?
ive searched for ck-7w in the hermes section but finds nothing? surely others must use this handsfree kit?
Well my issues, my hermes wont find it when searching for bluetooth devises? Never had any issues with my wizzard?
ive tryed a few different wm6 roms, now on the black.
Is there a cab somewhere to fix this, as i cant, use this phone until i get it sorted with my car kit
Hi fil,
I can't speak to WM6 but my 7W works well (usually) with my 8525 WM5 ATT Upgrade Rom. I remapped the ptt button to activate the built-in voice dialing. Sometimes the system announces the name throught the 7w speaker, other time via the 8525 speaker. Who knows why?
The quality of the recognition software is fair. I am planning on re-recording some of the voice tags in the car via the 7w mic. I have a feeling this will result in greater accuracy. It has to do the the acoustics where the tags are recorded.
My BT settings in the 8525 are
Mode = Turn on BT and Make device visable
Devices = add new device, if it finds it, click on Nokia CK-7w & check off Hands Free, at the bottom of the screen hit Save
BTW, the 7w data cable 5 volt lead does not have enough balls to charge the 8525.
Let me know if you get WM6 working with the 7w.
Lyle
You've already tried to reset the CK-7W ?
Especially when your Nokia Carkit has an other mobile paired in his memory (an old one for example) it won't pair the Tytn.
Worked for me (reset CK-7W).
After that my carkit works fine with yhe Tytn but has proplems if I wan't to pair a second (Symbian) phone.
alylea, my tytn wont even find it, when searching, have ticked the make seeable to othe devices, the method you discribe works perfectly as said on my wizard
davw, reset the ck-7w how?
tho the ck-7w can do up to 7 phones in its memory i belive, had no issues with a wizard and 2 different nokia all paired on it allready?
davw said:
You've already tried to reset the CK-7W ?
Especially when your Nokia Carkit has an other mobile paired in his memory (an old one for example) it won't pair the Tytn.
Worked for me (reset CK-7W).
After that my carkit works fine with yhe Tytn but has proplems if I wan't to pair a second (Symbian) phone.
Click to expand...
Click to collapse
again how'd you reset it? dont have the manual
still aint working, see unable to see the kit!???
anyone?
right its working now?, done nothing different?
was sitting in my car thismorning doing a bluetooth search for my new stereo headset i picked up from the PO on my way to work, it found it and the carkit , and paired with both!
well problem solved, but **** knows how ???
No idea what did the trick but here is the Nokia Europe site for the manual.
http://www.nokia.co.uk/A4222096
So iGuidance voice instructions do not come out of the CK-7W speaker not do the voice dialing confirmation names, although basic HF function works. I'm testing an inexpensive application that routes all audio from the 8525 to the BT output. I'll let you know if it works.
Hi guys,
I've been scouring the web for a number of days now with no success. Was wondering if anyone is experiencing the same problem and if anyone knows if this can be fixed.
I have a HTC P3600i, with ROM 3.00.707.18 (latest ENG ROM I could find) and have been using a Jabra BT8010 (firmware 1.33) for some months with no problems on A2DP or Handsfree (even switching back and forth is ok).
Have just got myself a new Dell BH200 stereo BT headset (for better bass) and while A2DP is working pretty fine (very nice), I'm finding that I can't use the headset for incoming or outgoing calls at all.
Everytime I try doing calls, the headset icon on the phone screen disappears after 5 or so seconds, and the headset itself switches off right after.
Am hoping someone can point me to the right direction, thanks..
Well two years later
I own a Dopod C730 and lo and behold I bought a Dell BH200 and I have the exact problem descibed above. I have the latest rom and I have tried reseting the smartphone all for naught.
Well I hope someone has figured this one out at some point or else I am going to be disappointed in my new Christmas gift
Well, I gave up and sold off my BH200 already. Am back to using the Jabra BT8010.
same problem here with my HTC Touch (3452). It's really frustrating to have to remove the headset every time u have to take a call. did anyone fimd a solution to this?
an123 said:
same problem here with my HTC Touch (3452). It's really frustrating to have to remove the headset every time u have to take a call. did anyone fimd a solution to this?
Click to expand...
Click to collapse
I am not using touch. Mine is Asus P535. WM6
Do double pairing. 2 diffrent mode
1) Hi Fi Stereo
2) Hands free
Music would mute when the call is recieved. When you end the call the music comes back.
myc said:
Mine is Asus P535. WM6. Do double pairing. 2 diffrent mode
1) Hi Fi Stereo
2) Hands free
Music would mute when the call is recieved. When you end the call the music comes back.
Click to expand...
Click to collapse
This didn't work for me at all, on my HTC P3600i with the Dell BH200 headset. Pairing was ok, but as soon as there was an incoming call, the Dell headset would ring, and then silence.. I'd also notice that the headset icon on my phone would disappear and the headset itself would turn off.
My Jabra BT8010 headset, on the other hand, paired just fine as both handsfree and wireless stereo device. In fact, I've ditched the BH200 and am using the BT8010 till now.
Well how come i aint see this thread . Ok now BH200 works fine and it has no issues ( as you guys should understand if it works with ASUS , NOKIA , SAMSUNG phone ).The problem is HTC's coding . It doesnt support AVRPS, thats the service which is necesary for Phone to switch to calls when received and switch back to music. Now jabra uses a different technology ... But you will have to compramise on the quality of music in BH200
( its awesome ) and more over it looks like a music head set any ways .
damn! is there any workaround? or is AVRPS hardware specific? after A2DP and AVRCP, no we have another acronym to add to the lexicon
Same problem here, tested BH200 with Universal WM6 and Touch HD, headphones switch off seemingly when they receive handsfree request.
Tested them with WM5, lo and behold, it worked. Now I wonder - how come that they work with WM5 BT stack and not with WM6? Any ideas?
Well, from what I gather, at least the good news is that AVRPS is not hardware-specific... so there should be a suitable workaround to this problem for anyone using WM6.
I bought my pair of Dell BH-200 headphones yesterday and while I'm absolutely thrilled by the perfect (at this price) sound quality when playing music, I'm rather annoyed by the fact that I have to take off my headphones every time I want to receive a call. After all, that's what a headset is for, right!?
In any case, here are the specs of my phone:
HTC Touch Elfin P3452, running an up-to-date Windows Mobile 6.1 (Onyx ROM)
I'm considering upgrading to Windows Mobile 6.5 these days to see if that would do the trick... has anyone of you guys tried the Dell headphones' headset compatibility when running WM 6.5? Going back to WM5 is definitely not a option, since I didn't quite enjoy the looks & ergonomics of that OS...
P.S.: Upgrading to WM 6.5 didn't do the trick, unfortunately So I'm pretty much stuck and I don't want to return the headphones since I really enjoy them, of course once I ignore how they don't actually function as a proper headset... Any help would be greatly appreciated!
I just found this fix for the situation:
http://social.microsoft.com/Forums/...s/thread/368efd50-ce24-453a-a31c-e6747c698082
Try setting the registry value:
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway\UseESCO = DWORD:0
Click to expand...
Click to collapse
The best part is, it seems to be actually working (I'm with Touch HD with Win 6.1).
Hi
Did anyone manage to replace the HD's Microsoft BT Stack with the Widcomm (Broadcom) Bluetooth stack? Are there known issues?
Thanks
Are there any replacement BT stacks at all for the default M$ bt stack?
Jetware.
http://www.jetwaremobile.com/
Touch Pro 2 seems to have a different stack then MS but also I heard that its hardware was different. My friend's TP2 seems to be better with A2DP then my HD. The addon mentioned in the above thread did not make difference to me besided showing the time on my AD2P headphones.
I tried the JetWare software already, but it did not work for me. My bluetooth works great to connect with my comp, and other phones, But can't use a hands free car kit. Have a Kenwood radio in my car and a Navigon gps. When connecting to either one, the bluetooth on my TouchHd will just suddenly turn off within a minute (never have more than 1 on at any given time to make sure it is not an interference issue). I know both these hands free sets work, I can connect my wife's T-Mobile dash, and my I-Mate PPC to both with no problem and perfect functionality. Kenwood's website shows compatibility with the touch pro and touch diamond. Are the BT stacks on those any different? I asked HTC and their tech support just said that kenwood does not say that it is compatible. I would think though that even just the basic hands free should still work though and not shut off on it's own.
Any suggestions or help would be very appreciated!
zolom said:
Did anyone manage to replace the HD's Microsoft BT Stack with the Widcomm (Broadcom) Bluetooth stack?
Click to expand...
Click to collapse
Is this possible at all?
What's the difference between the bluetooth on the Touch pro and the bluetooth on the Touch HD? Kenwood shows full compatability with the Touch Pro and my car radio, but does not even mention the Touch HD, and mine will not work with it. The bluetooth on the Touch HD shuts off right after it connects to the radio. Is there a difference in the bluetooth stack? If so, can it be ported? Is there a bluetooth hardware difference? Is it just a software thing on the phones themselves that might be fixable?
Hi all,
My O2 Atom having problem when using bluetooth handfree. It cannot make or receive call through the bluetooth headset(Nokia BH-100, and I do remember it is working a few month ago), but can transfer or receive files with other phone. My BT BH-100 can use by other phone without any problem, so the headset is good. I tried to connect with other bluetooth headset, still same problem. The funny thing is If I using a stereo bluetooth headset, I can listen to the music from it but still cannot make or receive any call, so strange! I tried many ROM, from 6.1 . 6.5, even the original 5.0 but all are same.
My question is: is bluetooth handsfree(make or receive call) same with the bluetooth file transfering? if yes, then why later one working but former not working? If no, then the strange thing can be explained as my O2 Atom handsfree hardware problem.
Please feel free to give my some explaination.
Thanks
Okay firstly, sending/receiving files is completely different from using a bluetooth headset. Secondly, to use your bluetooth headset during calls you must firstly PAIR the device with your PDA (Atom Life) then after the pairing procedure is complete goto advanced settings for that bluetooth device. You can do this by navigating to SETTINGS>CONNECTIONS>BLUETOOTH. It should be the first page at which you should just tap the name of the device and hold down and select EDIT. From there you should tick the boxes Wireless Headset and/or Hands Free.
sonofwind2008 said:
Hi all,
My O2 Atom having problem when using bluetooth handfree. It cannot make or receive call through the bluetooth headset(Nokia BH-100, and I do remember it is working a few month ago), but can transfer or receive files with other phone. My BT BH-100 can use by other phone without any problem, so the headset is good. I tried to connect with other bluetooth headset, still same problem. The funny thing is If I using a stereo bluetooth headset, I can listen to the music from it but still cannot make or receive any call, so strange! I tried many ROM, from 6.1 . 6.5, even the original 5.0 but all are same.
My question is: is bluetooth handsfree(make or receive call) same with the bluetooth file transfering? if yes, then why later one working but former not working? If no, then the strange thing can be explained as my O2 Atom handsfree hardware problem.
Please feel free to give my some explaination.
Thanks
Click to expand...
Click to collapse
Today I tried the original WM5.0 on my O2 ATOM again, found the bluetooth handsfree works fine, so now can conclude it's WM6 problem, I have to search for a good 6.5 rom, I used 6.5 21086, 6.1 20501 all not working, any one have bluetooth workable 6.5 rom, please share.
Thansk in advance
sonofwind2008 said:
Today I tried the original WM5.0 on my O2 ATOM again, found the bluetooth handsfree works fine, so now can conclude it's WM6 problem, I have to search for a good 6.5 rom, I used 6.5 21086, 6.1 20501 all not working, any one have bluetooth workable 6.5 rom, please share.
Thansk in advance
Click to expand...
Click to collapse
Dude i have same problem, i think my bluetooth got busted when i upgraded to wm 6.5, now i downgrade again to wm6.1 but to no avail, bluetooth still not working. btw it is working before i tried wm 6.5
anyone can help me fix this?