[Development STOPPED] Slide 2 UnLock v1.219 (updated on 17 September) - Windows Mobile Development and Hacking General

Hot fix - v1.219 (posted on 17 September)
1. fixed the problem that all incoming calls were identified as "unknown" on some devices (e.g. Treo)
2. fixed the problem to treat data connection as voice call
3. fixed the power drain problem (but not 100% sure yet, pls report your findings as my device never has this issue)
4. fixed the blank screen when responding a call on some devices
5. fixed the abnormal call waiting screen
6. fixed the data reconnection problem
Pls get this hot fix of iLock.exe at the end of this post. It's only applicable with v1.21 has been installed first.
After the installation, pls soft-reset the device.
BTW, I'm very happy to let you know that we now have 2 versions of Configurator for S2U.
English
http://forum.xda-developers.com/showpost.php?p=1501071&postcount=1458
Chinese
http://forum.xda-developers.com/showpost.php?p=1479572&postcount=1217
__________________
Cheers,
A_C
Hey guys, (posted on 31 August)
It's now udpated to v1.21, the changes are:
1. moved the phone part from SNAPI to TAPI for higher reliability
2. fixed the "Unknown/Private Caller" issue
3. added option DialedID (DWORD): it will appear when dialing a call. But there are limitations:
- it only has a "End Call" key, i.e. no key for mute, speaker, contact... etc... but it has a big pic depending on your CallerID setting.
- it only works when CloseApp is 0, CallerID is 1 or 2, DialedID is 1 & SLIDE is already running in the background. WHY? Simply because don't want to slow down the normal dialing process.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
4. improved the responsiveness of keys on the Caller ID screen
5. added option to stop showing the total no. of "Active Task" - set ShowTask (DWORD) to 0
6. fixed the bug of displaying wrong "missed call" when CallerID is disabled
7. fixed the sliding date issue when a call comes in & out very quickly
8. SLIDE now awares of the running of HTC's Audio Manager
9. some bugs fixed
Please remember to RESTART iLock after any registry settings (under \HKEY_CURRENT_USER\Software\A_C\Slide2Unlock) changed, otherwise it won't work.
The download links are:
CAB file
http://rapidshare.com/files/52374401/Slide2UnLock1.21-WM5.cab.html
http://www.sendspace.com/file/4s1grz
http://www.badongo.com/file/4208845
Updated files only (for experienced users if you don't want the old settings changed by the installer)
http://rapidshare.com/files/52374619/Slide2UnLock1.21.rar.html
http://www.sendspace.com/file/2r57xk
http://www.badongo.com/file/4208862
Please read the readme.txt for more details.
If you're happy with it, don't forget to buy me coffee or send me a post to show your appreciation. I need your motivation. Thanks.
__________________
Cheers,
A_C
Hey guys, (posted on 24 August)
Just updated to v1.20, the changes are:
1. reworked part of Caller ID function (as before, you're still recommended to set CloseApp to 0 when using the CallerID function)
2. when Caller ID is enable & works, the Caller ID of the latest missed call will be alerted
3. added option Slide2Answer (DWORD, 1 is enable; 0 is disable): when a call comes in & your device is locked by SLIDE, you'll have to "slide to answer"; or press the power button to decline the call. Please test this function carefully, otherwise you'll not be able to answer any call! If your device have power off problem with the previous versions, please do not enable this option. This option will only work when CallerID is enable & SafeMode is disable.
4. added support to show the total no. of "Active Task"
5. added support to show current day's Weather info from the HTC Home plugin: set "ShowWeather" to 5
(since I have to remap the icon index of HTC to WP/PW manually, if you find any mismatch icons, pls let me know)
6. iLock now accept several command switches:
-slide to start/invoke SLIDE
-nomsg to not to show any message even it closes itself & SLIDE
-refresh to close SLIDE & reload the registry settings (except for SafeMode changes, the device need soft-reset before it's effective)
7. some bugs fixed
Please read the readme.txt for more details.
__________________
Cheers,
A_C
Hey guys, (posted on 2 August)
Here is another update v1.19, the changes are:
1. fixed some issues of Caller ID
2. added support to animated Wallpaper (but not GIF)
you have to make muliple frames of pics with same size and concatenated them together to a single BMP file;
add to registry - "WpFrameNo" (DWORD) with the number of frames in the file;
add to registry - "WpFrameRate" (DWORD) with the number of milliseconds the frames will be changed;
for the Landscape wallpaper, use "WpLFrameNo" & "WpLFrameRate" correspondingly
Pls be WARNED that the larger the animated BMP file, the more RAM will be consumed; and more POWER will be drained!
I've uploaded a sample (Animated Globe) at the bottom of this post, please read the readme on how to use it.
3. added user input Weather info: set "ShowWeather" to 4;
add to registry - "UserWeather" (DSTRING) with the format X|Y|H|L
where X could be S for using the weather icon from SPB; and P will use the weather icon from WP/PW;
Y is the weather icon's index no;
H is the highest temperature;
L is the lowest temperature.
e.g. S|10|30|20 means to show SPB's icon no. 10 with highest temperature 30 & lowest temperature 20
4. the weather forecast of WP & PW will not show the icons for night
5. increased the length of the paths of Wallpaper to 128
6. fixed the keyboard icon problem with Wisbar
7. some bugs fixed
Please read the readme for the details.
__________________
Enjoy,
A_C
Hey guys, (posted on 21 July)
After more than 2 weeks, here is another update... v1.18. I'm so excited to announce that now SLIDE supports UNICODE, i.e. it shows the operator name, date & appointment details in your native language.
Secondly, it has its own Caller ID...
and a new Call Waiting Caller ID...
other changes are:
4. Appointment details can be displayed in multilple lines
5. supports the device's native screen size, make sure you have a wallpaper with proper size & enough free RAM (it may take around 6.5M)
6. SLIDE loads a bit faster
7. fixed the memory leak when WP or PW is enabled
8. some graphics changed
9. some bugs fixed
10. from v1.18, it only supports WM5 or 6
How to enable/disable Caller ID
========================
Please read this session thoroughly before attempting to enable the CallerID setting, otherwise it'll not work & you may need to soft-reset your device.
1. Please disable other 3rd party Caller ID apps.
2. As the system has a default Caller ID notification, iLock has to depress it before showing it's own Caller ID. But the problem is different Language device has to be handled differently. So far, iLock is coded to identify the system Caller ID notification in English & Traditional Chinese devices only (i.e. for these devices, simply change the value of "CallerID" as below). For other Languages, please follow these steps:
a. stop iLock.
b. try to call your device, write down the Windows TEXT of the incoming call notification (i.e. the TEXT on the top window bar, for e.g., WM6 English will be "Phone - Incoming")
c. new a registry value "IncomingText" (STRING) under "\HKEY_CURRENT_USER\Software\A_C\Slide2Unlock" and enter EXACTLY the above TEXT
d. set "CallerID" to 1 (fullscreen mode) or 2 (thumbnail mode)
e. start iLock & SLIDE
f. try to call your device again. If there is no new Caller ID, the TEXT you just enterd is not exactly match with the system's Caller ID notification. Please repeat the above steps.
g. see the new Caller ID, enjoy!
3. It's suggested to set "CloseApp" to 0, otherwise you'll have to wait more than 1 second before you know who's calling. The downside is it'll eat about 5.5M RAM.
4. As displaying a Caller ID screen is a mission critical job, pls install SLIDE in device instead of Storage Card.
5. Sometimes, the Caller ID screen may come out more than a second after the ring begins, but it's out of iLock's control.
6. Pls do not use the built-in PIN LOCK, otherwise the Caller ID will not be shown up properly.
7. How to recover the system default Caller ID notification?
a. stop iLock
b. set CallerID to 0
c. soft-reset the device
__________________
Cheers,
A_C
Hey guys, (posted on 4 July)
As you may already notice that this app is recently unwelcome here, this is probably the last update.
Admin, don't panic, I'll not post any files here. Besides, the update I provided will not contain any copyright graphic files that Apple claims to have. I was wondering how you or they know this app contains the iPhone code?!
Why this patch exists? Because some nice guys provided me some great info about WeatherPanel & PocketWeather. Now, SLIDE can show weather data from these apps too. And there is some minor bug fixing as well (includes getting data from SPBWeather).
Please follow the readme file for this update & enjoy!

A_C,
your apps is nice and I have updated and tested on each release...
please don't leave us... >.<

A_C you are the best!!!
skypirate said:
A_C,
your apps is nice and I have updated and tested on each release...
please don't leave us... >.<
Click to expand...
Click to collapse
I totaly agree with you!!!!!

Quality A_C,
Don't let the buggers grind you down........off to eat my *pple pie

Hey A_C, you have been making a great contribution to the xda's real meaning, i.e. "developing". So, I'd request you to continue ur stay here..
Moreover, I think the main prob is that xda-developers cannot "host" the files here. You can still provide a rapidshare (or similar) link to ur creations. But maybe u can clear this up with admins...

Thanks so much A_C for everything, you definately have to stay.
(Won't you guys look over at www.slide2unlock.co.nr , it looks like somebody must have seen this page and updated it already )

i like this soft.thank you very much!!!!!!!!!

Thank you for the application, it is a great app......
If you continue to make changes it would be great if you would add the city name for the Weather Application...

hi A_C,
just tested out the the latest v1.172 patch on my magician and it now works 100% perfect! again, thank you for looking up the WM2003se bugs!
with your hard work all said and done, slide2unlock truly has become THE most useful and must have app for the pocket pc (even surpassing the iphone's keylock app by a mile). and with this being the final release, you really know how to go out in style!
thanks A_C,
myownregister

No Weather Icon Showing??
I just updated to 1.17 and added the patch. I've followed the instructions in the "readme.txt" file to a T, as follows:
Update steps:
1. install v1.17
2. stop iLock & SLIDE
3. overwrite SLIDE.EXE with the extracted file (the default path is \Program Files\Slide2Unlock\)
4. extract the weather icons to the default program path.
5. create a new registry key "ShowWeather" under "\HKEY_CURRENT_USER\Software\A_C\Slide2Unlock"
0 is disable
1 show data from SPBWeather
2 show data from WeatherPanel
3 show data from PocketWeather
6. start iLock, & then SLIDE.
I created the new registry key from step 5 to show data from PocketWeather, which is installed to the Storage Card.
In Step 4, exactly where does the weather icons go?? I've tried copying the entire weather folder to \Program Files\Slide2Unlock, and even into the \GFX folder. I've tried putting the weather folder into the bmp folder of Pocket Weather also.
Still, I'm getting nothing as far as a weather icon. Everything else works great!! I just really need help with getting the weather icon to show. What am I missing here??
A_C, this is a really GREAT app. I've been using it ever since your initial release and keep updating (although I somehow missed the 1.16 update). Looking forward to even more excellent apps from you!!!

for some reason, the file i donwload from the link is always error, broken.
anyone kindly send me one? to my email?
thank you so much, great app!!!!! and it always wrong on my Asus a696 when i use landscape mode. wierd.
[email protected]

Here: http://www.sendspace.com/file/a9so9e

MAN, thank you so much! got the file!
now, anyone has the same problem i have? on landscpe mode, it runs, but doesn't work.
i got Asus A696 PDA, not phone. 240*320.
thanks again!

Thanks for the great app, A_C. One of the most outstanding PPC apps ever.
Absolutely flawless.

Hey guys,
Thank you for your comment & support. Glad to hear to that you like this little app.
@newbie2
Pls make sure the key "ShowWeather" is DWORD.
The weather icons included in the patch should be placed under the folder where you installed SLIDE.
@delude
Thank you very much!
@tonyso68
It's a known problem that PPL cannot run on certain device's landscape mode. No solution yet.

Great work A_C. I have been playing with this in my custom roms for the Apache for a little while now. I would like to bring your attention to one thing that I have found in your newest version dealing with Weather Panel. Now, I did convert this to an OEM and put it in a custom 3.5 rom for the Apache. As part of the conversion, I tried to minimize the amount of copying that was necessary so it roms from \Windows instead of \Program Files. That said, I have not had any problems before the latest version.
Here is a screen shot of what is showing when I have the reg for Weather Panel enabled. As you can see, it moves the date to the bottom and is only displaying the forcasted temp with an incorrect "high temp". The actual forcasted temp at this time shoudl read --/65. Perhaps it is an incompatibility issue, but I was wondering how it reads the info from the WP data. Perhaps my version of WP is not the same as the one used to create the WP compatibility.
Sorry for the bad screehshot. I had to resize to post it. If you cannot read it, in the lower left it says "-9999/65"

Great program. Love it on my 6800.

Can anyone help direct me how to get slide2unlock to show up on my Today screen like a plugin so I only have to click once to execute it on my ppc6800?
Creating Today screen plugins doesn't look very easy.
This would be a nice feature and would make it similar to the 6800s original unlock app on the Today screen.

Just set it up to lock on wake (or idle I guess it is). Then, when you hit the power button and shut the phone off, it is locked when it comes back on.

I just installed this after having problems with some other locking apps and it's working great for me. I do have one question though. I couldn't read through the entire previous thread and I didn't see anything about this is the readme.
I see that I have slide.exe running all the time taking up 2.65mb of RAM. There's also iLock.exe taking up 15.90kb. It was my impression since iLock is in the Startup folder that it is what needs to be running to trigger slide which actually locks the device. So I killed the slide.exe process and tested, everything worked fine. However slide.exe showed back up among my running processes after locking the device.
So, should both processes be running all the time, and if so, why? If not, any idea what's going on?
Thanks again for the great app!

Related

(Thread CLOSED) Slide 2 UnLock v1.101 (updated on 14/5/2007)

The original v1.0 was released from http://rychlicki.net/en/2007/04/01/174 on April 1. I only picked the SLIDE.EXE up & after copying & pasting some codes (http://forum.xda-developers.com/showthread.php?t=301517), it's now v1.101. Recent changes are:
(The latest version update can be found here)
v1.101 (14-5-2007) (it contains the SLIDE.EXE only)
1. hot fix for WM2003/SE about the missing SIP icon
v1.1 (13-5-2007)
1. support "auto start" when device is woke up; option "Autostart=1"
2. added "Off LCD" option to turn LCD off after n seconds
3. added "Blank Screen" option have a blank the screen (the device is still active) only instead of suspending the device (e.g. when using the Bluetooth to listen music)
4. added WiFi icon at the top bar (it'll only come out when WiFi is turned on, only works at WM5)
5. fixed the nasty WM5 flashing SIP icon bug
6. fixed some other bugs
Start from v1.1, INSTALLATION is necessary! If you have used any other methods to make SLIDE.EXE runs on wake up event, please UNDO it before using this version. It's now faster than any methods you used before. Read "How to use" of the readme.txt for details.
If you want to show me your appreciation, you may buy me a coffee by clicking here. Of course, send me a thank you message is also welcome.
v1.091 (7-5-2007)
1. fixed the Bluetooth icon not refreshed if option "Close App=0"
v1.09 (5-5-2007)
1. fixed the problem of displaying "Incoming Call" again
2. added "Wallpaper" & "Wallpaper Landscape" options to load the .bmp, .jpg or .png file you wants; make sure to include the full path of the file
3. some minor graphics changed
v1.08 (2-5-2007)
1. fixed the problem of displaying "Incoming Call" (FAILED)
2. added Bluetooth icon at the top bar (it'll only come out when Bluetooth is turned on, and only works for WM5)
v1.07 (1-5-2007)
1. renamed to "Slide 2 UnLock"
2. "VGA fix" for VGA devices (see below's SLIDE.INI)
3. added volume/vibrate icon at the top bar (not sure is it only work for WM5, maybe another disappointment for 2003/SE users)
4. battery icon changes color when charging
5. fixed the problem of displaying "Notification Bubbles"
6. displays figures of "Missed Call", "Unread SMS" & "Unread Email" properly when > 9
Please read the readme.txt for the details.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Cheers,
A_C
FAQs:
The following files are included in this release:
SLIDE.EXE - the locker
iLock.EXE - mainly for the "auto start" of SLIDE
SLIDE.INI - configures the appearance/behaviour of the locker
GFX (folder) - contains all the necessary graphics for the locker; fully customizable
How to use:
==========
1. a simple INSTALLATION is necessary!
2. place EVERYTHING in folder "\Program Files\Slide2Unlock" on your device, otherwise the "auto start" will not work!
3. create a shortcut or map a hardware key to the iLock.exe (not SLIDE.EXE)
4. you may even let iLock.exe starts everytime you reset your device by placing it under "\Windows\StartUp" (NOT RECOMMENDED yet)
5. everytime you have changed the setting in SLIDE.INI, you have to execute iLock.exe to reload the settings.
6. to UNINSTALL, use Task Manager to kill the SLIDE.EXE & iLock.exe. Then delete all files from "\Program Files\Slide2Unlock" and delete iLock.exe from "\Windows\StartUp".
SLIDE.INI:
========
1. the Date & Time format can be customized:
For example, to get the date displays
"Wed, Aug 31 94"
add this line to SLIDE.INI:
Date Format=ddd',' MMM dd yy
Time:
For example, to get the time displays
"11:29:40 PM"
add this line to SLIDE.INI:
Time Format=hh':'mm':'ss tt
Non-english devices may still have some problem for the format of the date/time. If you have these devices, please use the most basic date/time format like:
Date Format=d'/'M'/'yyyy
Time Format=H':'mm
If you do not want to have date/time display, use these commands:
Date Format=
Time Format=
2. The "slide to unlock" animation can be turned on/off with: (removed after v1.04)
No Animation=0 or 1
3. After the unlock action, the SLIDE.EXE can be sent to background if:
Close App=0
It'll further speed up the loading time of the next execution, but it'll eat up more memory. If you want it simply exits as version 1, use this command:
Close App=1
4. The return speed of the button can be configured by:
Speed=n (where n is 1, slowest to 5, fastest)
5. If your device has a VGA screen, please add to have better fit font:
VGA fix=1
6. Load the .bmp, .jpg or .png file you wants; make sure to include the full path of the file
Wallpaper="full path of the file that will be used at Portrait mode"
Wallpaper Landscape="full path of the file that will be used at Landscape mode"
7. If you want to "auto start" SLIDE.EXE when the device is turned on, use:
Autostart=1 (0 to turn off this function)
8. To turn off the LCD by SLIDE.EXE, you may specify:
Off LCD=n (after n seconds idle, the screen will be off; minimum is 5 seconds; 0 is disable this function)
9. When the LCD is turned off by SLIDE.EXE, you may specify whether the device is suspended or remain active but with LCD turned off
Blank Screen=0 or 1 (0 means suspend the device; 1 means only turn off the LCD)
10. If there is no SLIDE.INI, the default values are:
Date Format=dddd', 'd MMMM
Time Format=H':'mm
Close App=0
Speed=1
VGA fix=0
Wallpaper=Application path + "GFX\Res\wallpaper.bmp"
Wallpaper Landscape=Application path + "GFX\Res\wallpaperL.bmp"
Autostart=1
Off LCD=0
Blank Screen=0
Known limitations:
=============
1. Cannot display UNICODE (for faster loading time)
2. GSM signal strength and Operator Name will NOT be available on WM2003 devices (but can be added manually)
3. "Missed Call", "Unread SMS" & "Unread Email" notifications will NOT function on WM2003 devices
4. Although Landscape mode is supported, DON'T change the orientation when SLIDE.EXE is running, otherwise it'll be really locked up
5. Reported not compatible devices: Japanese OS, Atom Life, Palm TREO
6. for faster loading time, please use option "Close App=0", but it needs about 5M memory. But the result is worth it.
7. DON'T enable the built-in PIN LOCK if SLIDE.EXE is running, otherwise it'll be totally locked up
Trouble shooting:
=============
If you find your device is hanging there with a blank screen or no response with any key or screen-touch, you may not need to reset it. Please follow these steps if your device has a camera button:
1. press the camera button to invoke the built-in camera program
2. press the end call button to go back to Today screen
3. use Task Manager (a third party freeware; highly recommended) to close the SLIDE.EXE
Special Thanks
===========
1. http://www.tzywen.com/index.php
2. http://rychlicki.net/en/2007/04/01/174
3. http://www.arianesoft.ca and forum fellows
4. Aneto for testing the "VGA fix"
5. Larna for helping the C programming (sorry I used the "iLock" filename )
Cheers,
A_C
Testing version 1.07 on a Wizard
I am using batterystatus to initiate slide 2 unlock
Points to note so far
When i recieve an incoming call i cannot see who is calling
When i am in portait mode and slide is running if i open the keyboard the screen is no longer locked and the screen goes all crazy with the today screen flashing in the background and i can interact with it, in 1.06 the screen remained locked even tho i could not unlock it i could not interact with the today screen
Great app tho, keep up the good work!
niall0s said:
Testing version 1.07 on a Wizard
I am using batterystatus to initiate slide 2 unlock
Points to note so far
When i recieve an incoming call i cannot see who is calling
Click to expand...
Click to collapse
That should be fixed in 1.07. Do you have any CallerID programs running?
niall0s said:
When i am in portait mode and slide is running if i open the keyboard the screen is no longer locked and the screen goes all crazy with the today screen flashing in the background and i can interact with it, in 1.06 the screen remained locked even tho i could not unlock it i could not interact with the today screen
Click to expand...
Click to collapse
That is under the TODO list...
Cheers,
A_C
Nice work A_C. This slide program is SO nice to have. Just makes things that much smoother.
Cancel this post. After letting it sit for a bit it seems to be working! The thanks still apply though.
sqaure screen version
is there any way you can edit this to make it work on 240X240 screens like the treo 700wx or 750?
kwyatt6347 said:
is there any way you can edit this to make it work on 240X240 screens like the treo 700wx or 750?
Click to expand...
Click to collapse
It should work for a while ago...
http://forum.xda-developers.com/attachment.php?attachmentid=37875&d=1177544030
This is probably a known bug, but in both landscape and portrait modes, the volume icon is not transparent. I am using WM 2003SE, but I think it's a universal problem because it appears to be the case in your screenshots as well.
Keep up the good work!
jackbnymbl said:
This is probably a known bug, but in both landscape and portrait modes, the volume icon is not transparent. I am using WM 2003SE, but I think it's a universal problem because it appears to be the case in your screenshots as well.
Keep up the good work!
Click to expand...
Click to collapse
You really have an eagle's eye.
Just checked that it's because you have not overwriten very new GFX files to your device (just like me in my development environment ). And I've updated the screenshots as well.
Cheers,
A_C
I have been following your progress A_C, excellent work. You have greatly improved this unique software. Nicely implemented.
This is the best yet A_C. I like the change in the battery icon w/ charging. As always, I look forward to your future developments.
Just an idea, and I'm no programmer so I have no clue as to the feasability of this, but perhaps a sound file could be set to play on unlock? Keep up the great work.
A_C said:
It should work for a while ago...
http://forum.xda-developers.com/attachment.php?attachmentid=37875&d=1177544030
Click to expand...
Click to collapse
thanks. it does work great. .
carrier info displayed
sorry about that spam in my last post.. apparently had some type of spy/adware/virus
should be fixed now
regarding this software, is there any way to not show carrier info in the upper left hand corner?
Works very good on my Trinity as well!
Well done !!
slider
Great job A_C but sad that i have wm2003SE and dont know how and what to paste in the registery.
For WM2003/SE or non-mobile device, you may use this trick to show a fake operator name & signal:
- add this key to the registry "HKEY_LOCAL_MACHINE\System\state\phone"
- add the following keys:
"Current Operator Name" (REG_SZ)
"Radio Ready State" (REG_DWORD)
"Signal Strength Raw" (REG_DWORD)
Example:
Current Operator Name="Mobily"
Radio Ready State=1
Signal Strength Raw=100
Just trying to help out A_C! I've been following this util in the ArianSoft forum.
Thanks for the great util!
aleksander100 said:
Great job A_C but sad that i have wm2003SE and dont know how and what to paste in the registery.
Click to expand...
Click to collapse
You first need a registry editor like Resco or SKTools. After that just navigate to "HKEY_LOCAL_MACHINE\System\state\phone" and add the following 3 keys.
"Current Operator Name" (REG_SZ)
"Radio Ready State" (REG_DWORD)
"Signal Strength Raw" (REG_DWORD)
e.g. Current Operator Name="cingular"
Radio Ready State=1
Signal Strength Raw=100
u mean including the scopes(") or without and with the line dword ALL TOGETHER
hey A_C why dont u add the connectivity icon as shown on the iphone's website?
u mean like this?

(Thread CLOSED, 22 October 2007) S2U2 v0.60 - back to clock

Hey, (22 Oct 2007)
Another update to v0.60:
- changed the clock files format (all under GFX\Clock) for easier customisation (for transparent effect, the top left corner pixel must be the transparent color)
(For hi-res devices, please extract files from either vclock.zip or vclockH.zip & copy them to \GFX\Clock under the installed path. Otherwise the clock will be shown as half-sized.)
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(used clockh.zip & TimeFormat set to hh':'mmtt)
- fixed the background power interuption problem
- do not start S2U2 when the LCD is turned off
- smoother start-up
- some bugs fixed
CAB files (Thanks Xenpain for hosting the file)
http://ac.xenpage.eu/S2U2-0.60-WM5.rar
http://www.mediafire.com/?cmmdnztwwdl
(There is no updated files only for download this time)
For details, as usual, please read the Readme file or the 2nd post.
Besides, S2U2 now has two add-on
The configurator by dmagician: http://forum.xda-developers.com/showpost.php?p=1600647&postcount=331
And a Today plug-in by perasite: http://forum.xda-developers.com/showpost.php?p=1590615&postcount=234
Thanks both!
_______________________________________________
Hey, (17 Oct 2007)
A minor update to v0.53:
- added option ShowAlarm to show the coming system alarm info
- added a little animation when the device is charging
- fixed the "Flight Mode" issue for Treo
- some minor bugs fixed
For details, as usual, please read the Readme file or the 2nd post.
_______________________________________________
Hey guys, (14 Oct 2007)
Just updated to v0.52 with the following changes:
- ShowAppointment also shows "all day event" (but only the 1st one)
- reworked the "Flight Mode / No Service" detection
- fixed the WVGA display defect in Landscape mode
- fixed Autostart to work with soft-key power off
- some bugs fixed
For details, as usual, please read the Readme file or the 2nd post.
_______________________________________________
Hey guys, (11 Oct 2007)
Following the previous thread, here is another update... v0.5...
- added Landscape orientation (the wallpaper file is wallpaperL.bmp under GFX folder)
- added auto power saving as S2U (i.e. the shimmer will stop after idle for a while)
- added an icon for S2U2
- added Unread XXX notifications & ShowTask option
- added options ShowAppointment & AppointmentTimeFormat
(read the Configuration section below for the details)
- no more AC_XXX.bmp temp files
- all texts are VGA aware
- some graphic improvements on VGA mode
- fixed the problem with other Alarm software
CAB files (Thanks Xenpain for hosting the file)
http://ac.xenpage.eu/S2U2-0.5-WM5.rar
http://www.mediafire.com/?btf2adld2vt
There is no updated files only for download this time, please backup your settings & use the CAB file to install.
For details, as usual, please read the Readme file or the next post.
Finally, to show your appreciation or if you want to see the future of this app, pls CLICK HERE.
Readme...
READ ME FIRST
=============================
S2U2 is a simple lock/unlock application which has the iPhone style slide unlocking. It can be used as a screensaver while you don't use your device.
THIS VERSION DOES NOT HAVE THE CALLER ID FUNCTION YET!
Prerequisition:
===============
- WM5 or 6 devices
- free RAM: ~ 1M for QVGA; ~ 3M for VGA
Installation:
=============
- If you have Slide2Unlock installed, please uninstall it first & then soft-reset.
- After installation, there are 2 shortcuts created under \Program Files\S2U2:
iLock2.lnk - start/stop ilock2.exe (on the 1st run, it runs silently in the background; on the 2nd run, it closes iLock2 & S2U2)
S2U2.lnk - manually start S2U2 (be sure iLock2 is running in the background, otherwise the Battery status will not be updated)
- A shortcut for iLock2.exe is created automatically under "\Windows\StartUp" as well.
- Installation on Storage Card is not supported (for the sake of stability).
- There are 2 clock font files for selection - clock.zip (default) & clockH.zip. How to use?
1. stop iLock2
2. delete those files under \GFX\Clock (under the installed folder)
3. copy the extracted files to \GFX\Clock
4. start iLock2 & S2U2
- For hi-res devices, please extract files (follow the above steps) from either vclock.zip or vclockH.zip & copy them to \GFX\Clock under the installed path. Otherwise the clock will be shown as half-sized.
Configuration: (in the Registry under \HKEY_CURRENT_USER\Software\A_C\S2U2. Please remember to RESTART iLock2 after any registry settings changed, otherwise it won't work):
=================================================================================
- The Date & Time format can be customized by changing the keys DateFormat & TimeFormat:
Date:
d Day of month as digits with no leading zero for single-digit days.
dd Day of month as digits with leading zero for single-digit days.
ddd Day of week as a three-letter abbreviation.
dddd Day of week as its full name.
M Month as digits with no leading zero for single-digit months.
MM Month as digits with leading zero for single-digit months.
MMM Month as a three-letter abbreviation.
MMMM Month as its full name.
y Year as last two digits, but with no leading zero for years less than 10.
yy Year as last two digits, but with leading zero for years less than 10.
yyyy Year represented by full four or five digits, depending on the calendar used. Thai Buddhist and Korean calendars both have five digit years. The "yyyy" pattern will show five digits for these two calendars, and four digits for all other supported calendars.
yyyyy Identical to "yyyy".
For example, to get the date displays "Wed, Aug 31 94"
set DateFormat to ddd',' MMM dd yy
Time:
h Hours with no leading zero for single-digit hours; 12-hour clock.
hh Hours with leading zero for single-digit hours; 12-hour clock.
H Hours with no leading zero for single-digit hours; 24-hour clock.
HH Hours with leading zero for single-digit hours; 24-hour clock.
m Minutes with no leading zero for single-digit minutes.
mm Minutes with leading zero for single-digit minutes.
s Seconds with no leading zero for single-digit seconds.
ss Seconds with leading zero for single-digit seconds.
t One character time marker string, such as A or P.
tt Multicharacter time marker string, such as AM or PM.
For example, to get the time displays "11:29:40 PM"
set TimeFormat to hh':'mm':'ss tt
- If you want to "auto start" S2U2 when the device is woke up, set:
Autostart to 1 (0 to disable)
- To turn off the LCD by S2U2, you may specify:
OffLCD to n (after n seconds idle, the screen will be off; minimum is 5 seconds; 0 to disable)
- When the OffLCD is enabled, you may specify whether the device is suspended or remain active but with LCD turned off:
BlankScreen set to 0 or 1 (0 to suspend the device; 1 to turn off the LCD only)
- For devices with the capability to turn off the backlight, you may set S2U2 to start automatically when the device's backlight is turned off by:
IdleStart set to 1 (0 to disable)
- Similar to IdleStart, ACIdleStart has the same function when the device is charging:
ACIdleStart set to 1 (0 to disable)
- Similar to OffLCD, ACOffLCD has the same function when the device is charging:
ACOffLCD to n (after n seconds idle, the screen will be off; minimum is 5 seconds; 0 to disable)
- Similar to BlankScreen, ACBlankScreen has the same function when the device is charging:
ACBlankScreen set to 0 to suspend the device; or 1 to turn off the LCD only
- If you want to install S2U2 to other folders or the storage card, please update the key:
S2U2Path to "the new full path"
- To turn off the LCD during a phone talk, set the key:
BlankOnTalk to 1 (0 to disable)
- To enable D-Pad input, set the key:
DpadOn to 1 (0 to disable)
- To show the Appointment information shown at Today's screen, set the key:
ShowAppointment to 1 (0 to disable)
- To change the format of Appointment's time, change the key:
AppointmentTimeFormat (use the same syntax as TimeFormat)
- Not to display the total no. of "Active Task", set:
ShowTask to 0 (1 to enable)
- To show the coming system alarm info, set the key:
ShowAlarm to 1 (0 to disable)
Only use the following 2 settings if your device have any abnormal behaviour:
- When NoPowerSuspend is set to 1, the OffLCD & ACOffLCD will be disabled. It'll untouch the Power Management and leave it back to the OS.
- When SafeMode is set to 1, iLock2 will not enter the "Unattended mode" (this is a special mode for the background jobs to run but without turning the LCD on). The device may need to soft-reset for SafeMode to be enabled.
- The default values are added on the first run of iLock2:
ACBlankScreen=0
ACIdleStart=0
ACOffLCD=0
AppointmentTimeFormat=h':'mmt
Autostart=1
BlankOnTalk=0
BlankScreen=0
DateFormat=dddd', 'd MMMM
DpadOn=0
IdleStart=0
NoPowerSuspend=0
OffLCD=0
SafeMode=0
ShowAlarm=1
ShowAppointment=0
ShowTask=1
S2U2Path="\Program Files\S2U2"
TimeFormat=H':'mm
Command Switch of iLock2:
=========================
iLock2.exe accepts the following command switches:
-slide to start/invoke S2U2
-nomsg to not to show any message even it closes itself & S2U2
-refresh to close S2U2 & reload the registry settings
Known limitations & FAQs:
=========================
- How to change wallpaper? Create a jpg file with resolution the same as your device (QVGA is 240 x 320; VGA is 480 x 640); rename it to "wallpaper.jpg"; copy it to the gfx folder (default is \program files\s2u2\gfx\); restart iLock2. And the file "wallpaperL.jpg" is for the Landscape mode.
- How to edit the registry? You need 3rd party software like "Task Manager" & "Total Commander". Try to google them & they are very user friendly apps.
- After changing the registry settings, iLock2/S2U2 do not behave as instructed?? Pls RESTART iLock2 after any registry settings is made.
- If "Password/Pin Lock" or "Owner Information" are enabled to display at wake up, S2U2 may cause the screen flicker. Pls disable these functions.
- My device's special Keys are not blocked by S2U2?! (e.g. HTC Touch) This is a device specific problem that cannot be resolved.
- Error: UserNotification has too much records?
That means the notification database contains more than 500 records. It'll ruin the Autostart of S2U2. Pls use other s/w to clean it up first.
- NOT Compatible devices: SX66, Xda IIs (Blue Angel)
Trouble shooting:
=================
If you find your device is hang with a blank screen or no response with any key or screen-touch, you may not need to reset it. Please follow these steps if your device has a camera button:
- press the camera button to invoke the built-in camera program
- press the end call button to go back to Today screen
- use Task Manager (a third party freeware; highly recommended) to close the S2U2.EXE
Special Thanks:
===============
- Forum fellows at xda-developers (http://forum.xda-developers.com). Thank you for your testings, comments, supports & patience.
Downloaded and works great. No more artifacts on the operator or date line AND task notifications. Great Job.
PS yr paypal link doesn't work (for me anyway)
thanks
let me be the second to say thanks.....
again
perrrrfect!
atleast 10x better on my device than v0.3.
btw, did you use my method for drawing the fonts?
or are they just larger bitmaps?
well whatever it is atleast it looks much more iphone-like
great job!
Ghostdog1 said:
Downloaded and works great. No more artifacts on the operator or date line AND task notifications. Great Job.
PS yr paypal link doesn't work (for me anyway)
Click to expand...
Click to collapse
Thanks for letting me know. It's updated...
Yea, the new version ROXX! Great work! 0.5 has all features I need and works flawless so far and needs way less ram than S2U1. Thank you very much!
it's working flawless now. Thanks!!!
great work!
love it.
it works great keep up the work!
Hay A_c
Works great, but I'am havin an issuie, when i push the power buttom to wake up my device, the slide2unlock2 wont start auto, i end directly on the 2day screen ???
Is there something I'am missing ???
Cobra2 said:
Hay A_c
Works great, but I'am havin an issuie, when i push the power buttom to wake up my device, the slide2unlock2 wont start auto, i end directly on the 2day screen ???
Is there something I'am missing ???
Click to expand...
Click to collapse
Did you start s2u2 by going to the Programms -> S2U2 folder and klick on s2u2?
Cobra2 said:
Hay A_c
Works great, but I'am havin an issuie, when i push the power buttom to wake up my device, the slide2unlock2 wont start auto, i end directly on the 2day screen ???
Is there something I'am missing ???
Click to expand...
Click to collapse
Pls read your PM.
Hello A_C. I Love your Program! (Sorry for my very bad english)
I have a Question, it is possible to add a new notification or appointment, i mean the Alarm Clock like SPM Mobile Shell.
I want to view in how many hours the Alarmclock starts and on what Day.
I hope you can unterstand me.
Example:
Next Alarm On Fri 12.10.2007 at 06.00 (20h 30min)
That is very fine when you can do it.
And when I receive a MMS than comes the Icon for E-Mails. Can you make a Extra Icon for MMS?
Example:
1 MMS ; 2 SMS ; 5 E-Mails
Thank you, i donate you Now with 10 € for your very good Program!!!
hi A_C.. nice app.. i've been following and using s2u and s2u2 for months now..
the update is very nice.. especially the quick transition from landscape to portrait and back..
a problem though and an annoyance.. when my device goes to sleepmode/suspend (blankscreen=0 , offlcd=5).. i can't make my screen active again (to show the slide to unlock) by any keypress except the power button.. under settings>buttons>lock, i've already set When device is Off: Do not lock buttons
i'm using a case on my wizard and accessing the power button is very difficult.. that is why i have s2us as a launcher icon on my today screen to lock buttons and turn off the device.. but going back from sleep is very difficult now.. i need to remove my phone from the case first, press the power button, return it to the case, then slide to unlock.. and if i'm not fast enough, 5 seconds lapse, phone goes back to sleep, and i need to press the power button again..
on previous versions (even on S2U), all i need is to press the red button (call end), or any hardware key, to activate screen then unlock by sliding the arrow..
also, my other device.. a blue angel.. has a broken power button.. and once it goes to sleep (same settings: When Device is off: Do not lock).. it won't wake up unless i poke on the reset hole.. it's becomming an annoyance now.. that i'm thinking of going back to s2u2 v0.3 for the meantime..
i know this mode saves power preventing screen activation via ANY accidental keypress except power .. but this setting is already handled by the settings>button>lock applet.. maybe you can just remove that bug/feature on s2u2 or just let s2u2 follow the mode set in the settings.. so those with power button problems won't have a phone-in-comatose every time s2u2 kicks in..
i hope my problem is properly addressed on future updates..
thanks.
Thanxs nic work
Just installed it - it runs very smoothly on my MDA Vario/Qtek9100/Wizard.
Switching to landscape mode works very fast! Appointments are shown correctly, sms-notification works perfect, just like the tasks-icon.
You did a very nice job with version 0.5! It's lightning fast, and the animation stop should save even some more memory usage - thanx!
I hope the weather icons are next on the to-do list for version 0.6! Keep up the very nice work...
A_C said:
Pls read your PM.
Click to expand...
Click to collapse
Hi A_C
Great work on this new version!
Am excited to see each of the previous features are now being implemented! However, I realise S2U2 v0.5 doesn't support other means of powering off the PPC.
With v0.5, when I off my PPC using the on-screen shortcut and when I switch on my PPC again, S2U2 is not activated. S2U2 seems to be activated if only I off my device using the 'power' button.
Basically, I like to switch off my PPC (i.e. device off, not just the screen) using on-screen shortcut icon, instead of the 'Power' button (try to preserve/lengthen the lifespan of my hard button).
I remember at one point you've remove this feature, and upon my (and some others most probably) request, you have included it back. May I know whether it's possible to include this feature back again?
Or... is this feature (removal) intended in the first place.. which then, make this a 'bug'??
Switching back to v0.3 for the time being.
Answers
Thanks @dodo-dk. The alarm notification is quite interesting. But I would like to fix the bugs first. I'll think about it later.
For the MMS notification, actually there is already an icon made for it. But it's found that different OEM or Service provider had implement this part quite different and do not follow what Microsoft's SNAPI's requirements. So in your case, it seems that part is broken & S2U2 could not display the proper numbers.
@ytsejam_
Pls try the option NoPowerSuspend (set to 1) & let me know does it work. Sorry that I made a mistake in the readme. The NoSuspendMode should be treated as NoPowerSuspend. You need to rename the key NoSuspendMode to NoPowerSuspend.
(just corrected them & re-uploaded)
@whisper
I have reservation to recover the weather icon as it seems to have many problems.
@Sian
Your case should be same as Cobra2, pls read your PM.
i've upx unpacked and disassembled to remove the 's2u2 v0.5 by A_C' message at the start,
as it kinda ruins the iphone effect imo. same reason i didn't put any credits in my slider app.
hope you don't mind.
can upload here if you want to have two versions
(one that supports giving you credit, another for people who don't like the message on there).
or you could have the message on by default, but allow people to set an option in the config to turn it off.
some other bugs (and this is getting really picky..):
1. the arrow's graphics movement on vga devices is still a bit laggy. might need to increase the buffer if it's detected it's a vga device.
2. the slideback movement is also a fair bit faster than the iphone. (only mention this because it effects the functionality of being easily able to grab it when it's sliding back that the iphone has)
there are some people that like it springing back to the start really fast and some that don't.
a config option to set the slideback speed could be an idea.
3. grabbing it when it comes back makes it go another 2x faster when you let it go again.
i've come across this problem in my .net and javascript slider versions.
the reason it goes 2x faster every time is because it's using the old slideback timer which is already moving the pixels back, and then it's trying to do that again at the same time.
the way to overcome it is to turn off and reset your timer for the 'slideback' every time you get the mousedown event.
then when it slides back on the mouseup event it will do it the same way as it did the first time.
should be the same to fix in c++. i assume you must use a timer for the slideback etc. as there aren't many different ways you can code it.

(8 November 2007) S2U2 v0.72 - back to caller

Hey, (30-10-2007)
Thank you for your translation contribution. Here it is another update... v0.72
- added a few more locations support to CallerID
- added international languages support (for non-English devices, d/l the S2U2LanguagePack.rar; extract your language's ini file; rename it to lang.ini; copy to the S2U2 installed folder; restart iLock2)
- fixed the unmapping issue of keyboard on unlock
- some minor bugs fixed
- more FAQs added in the ReadMe.txt
CAB files (Thanks Xenpain for hosting the file)
http://ac.xenpage.eu/S2U2-0.72-WM5.rar
http://www.mediafire.com/?4b2y39ixmgk
Language Pack (Afrikaans, Chinese (Simplified & Traditional), Czech, Dutch, French, German, Greek, Italian, Korean, Norwegian, Polish, Portuguese, Romanian, Russian, Slovak & Spanish)
http://ac.xenpage.eu/S2U2LanguagePack.rar
http://www.mediafire.com/?0t24htzlmoe
Clock Pack
http://ac.xenpage.eu/S2U2ClockPack.rar
http://www.mediafire.com/?7yyzjbnmd2p
Enjoy,
A_C
__________________________________________
Hey guys, (26-10-2007)
Following the previous thread, here is another major update... v0.7...
- added opton CallerID to have a full screen or thumbnail caller pic
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
(left: CallerID = 1, right: CallerID = 2)
- when CallerID is enabled, & when a call is missed, a "Missed Call" will show who made that...
- added support to 320 x 320 devices
- smoother start-up
- some bugs fixed
CAB files (Thanks Xenpain for hosting the file)
http://ac.xenpage.eu/S2U2-0.70-WM5.rar
http://www.mediafire.com/?4rzy4jbe2ty
There is no updated files only for download this time.
For details, as usual, please read the Readme file or the next post.
Besides, please read the README FIRST, especially the Known limitations & FAQ before you post your questions.
Finally, if you are happy with this app, pls CLICK HERE to donate to show your appreciation.
Readme First
READ ME FIRST BEFORE YOU POST YOUR QUESTIONS
=======================================
S2U2 is a simple lock/unlock application which has the iPhone style slide unlocking. It can be used as a screensaver while you don't use your device. And it's has a CallerID function.
Prerequisition:
===============
- WM5 Phone or WM6 Professional devices
- free RAM: ~ 1M for QVGA; ~ 3M for VGA
Installation:
=============
- If you have Slide2Unlock installed, please uninstall it first & then soft-reset.
- After installation, there are 2 shortcuts created under \Program Files\S2U2:
iLock2.lnk - start/stop ilock2.exe (on the 1st run, it runs silently in the background; on the 2nd run, it closes iLock2 & S2U2)
S2U2.lnk - manually start S2U2 (be sure iLock2 is running in the background, otherwise the Battery status will not be updated)
- A shortcut for iLock2.exe is created automatically under "\Windows\StartUp" as well.
- Installation on Storage Card is not supported (for the sake of stability).
- There are 2 clock font files for selection - clock.zip (default) & clockH.zip. How to use?
1. stop iLock2
2. delete those files under \GFX\Clock (under the installed folder)
3. copy the extracted files to \GFX\Clock
4. start iLock2 & S2U2
- For hi-res devices, please extract files (follow the above steps) from either vclock.zip or vclockH.zip & copy them to \GFX\Clock under the installed path. Otherwise the clock will be shown as half-sized.
Configuration: (in the Registry under \HKEY_CURRENT_USER\Software\A_C\S2U2. Please remember to RESTART iLock2 after any registry settings changed, otherwise it won't work):
=================================================================================
- The Date & Time format can be customized by changing the keys DateFormat & TimeFormat:
Date:
d Day of month as digits with no leading zero for single-digit days.
dd Day of month as digits with leading zero for single-digit days.
ddd Day of week as a three-letter abbreviation.
dddd Day of week as its full name.
M Month as digits with no leading zero for single-digit months.
MM Month as digits with leading zero for single-digit months.
MMM Month as a three-letter abbreviation.
MMMM Month as its full name.
y Year as last two digits, but with no leading zero for years less than 10.
yy Year as last two digits, but with leading zero for years less than 10.
yyyy Year represented by full four or five digits, depending on the calendar used. Thai Buddhist and Korean calendars both have five digit years. The "yyyy" pattern will show five digits for these two calendars, and four digits for all other supported calendars.
yyyyy Identical to "yyyy".
For example, to get the date displays "Wed, Aug 31 94"
set DateFormat to ddd',' MMM dd yy
Time:
h Hours with no leading zero for single-digit hours; 12-hour clock.
hh Hours with leading zero for single-digit hours; 12-hour clock.
H Hours with no leading zero for single-digit hours; 24-hour clock.
HH Hours with leading zero for single-digit hours; 24-hour clock.
m Minutes with no leading zero for single-digit minutes.
mm Minutes with leading zero for single-digit minutes.
s Seconds with no leading zero for single-digit seconds.
ss Seconds with leading zero for single-digit seconds.
t One character time marker string, such as A or P.
tt Multicharacter time marker string, such as AM or PM.
For example, to get the time displays "11:29:40 PM"
set TimeFormat to hh':'mm':'ss tt
- If you want to "auto start" S2U2 when the device is woke up, set:
Autostart to 1 (0 to disable)
- To turn off the LCD by S2U2, you may specify:
OffLCD to n (after n seconds idle, the screen will be off; minimum is 5 seconds; 0 to disable)
- When the OffLCD is enabled, you may specify whether the device is suspended or remain active but with LCD turned off:
BlankScreen set to 0 or 1 (0 to suspend the device; 1 to turn off the LCD only)
- For devices with the capability to turn off the backlight, you may set S2U2 to start automatically when the device's backlight is turned off by:
IdleStart set to 1 (0 to disable)
- Similar to IdleStart, ACIdleStart has the same function when the device is charging:
ACIdleStart set to 1 (0 to disable)
- Similar to OffLCD, ACOffLCD has the same function when the device is charging:
ACOffLCD to n (after n seconds idle, the screen will be off; minimum is 5 seconds; 0 to disable)
- Similar to BlankScreen, ACBlankScreen has the same function when the device is charging:
ACBlankScreen set to 0 to suspend the device; or 1 to turn off the LCD only
- If you want to install S2U2 to other folders or the storage card, please update the key:
S2U2Path to "the new full path"
- To turn off the LCD during a phone talk, set the key:
BlankOnTalk to 1 (0 to disable)
- To enable D-Pad input, set the key:
DpadOn to 1 (0 to disable)
- To show the Appointment information shown at Today's screen, set the key:
ShowAppointment to 1 (0 to disable)
- To change the format of Appointment's time, change the key:
AppointmentTimeFormat (use the same syntax as TimeFormat)
- Not to display the total no. of "Active Task", set:
ShowTask to 0 (1 to enable)
- To show the coming system alarm info, set the key:
ShowAlarm to 1 (0 to disable)
- To enable the Caller ID screen; set the key:
CallerID to 1 - full screen mode; 2 - thumbnail mode; 0 to disable
Only use the following 2 settings if your device have any abnormal behaviour:
- When NoPowerSuspend is set to 1, the OffLCD & ACOffLCD will be disabled. It'll untouch the Power Management and leave it back to the OS.
- When SafeMode is set to 1, iLock2 will not enter the "Unattended mode" (this is a special mode for the background jobs to run but without turning the LCD on). The device may need to soft-reset for SafeMode to be enabled.
- The default values are added on the first run of iLock2:
ACBlankScreen=0
ACIdleStart=0
ACOffLCD=0
AppointmentTimeFormat=h':'mmt
Autostart=1
BlankOnTalk=0
BlankScreen=0
CallerID=0
DateFormat=dddd', 'd MMMM
DpadOn=0
IdleStart=0
NoPowerSuspend=0
OffLCD=17
SafeMode=0
ShowAlarm=1
ShowAppointment=0
ShowTask=1
S2U2Path="\Program Files\S2U2"
TimeFormat=H':'mm
Command Switch of iLock2:
=========================
iLock2.exe accepts the following command switches:
-slide to start/invoke S2U2
-nomsg to not to show any message even it closes itself & S2U2
-refresh to reload the registry settings & restart S2U2
Known limitations & FAQs:
=========================
- How to change wallpaper?
- Create a jpg file with resolution the same as your device (QVGA is 240 x 320; VGA is 480 x 640); rename it to "wallpaper.jpg"; copy it to the gfx folder (default is \program files\s2u2\gfx\); restart iLock2. And the file "wallpaperL.jpg" is for the Landscape mode.
- How to edit the registry?
- You need 3rd party software like "Task Manager" & "Total Commander". Try to google them & they are very user friendly apps.
- After changing the registry settings, iLock2/S2U2 do not behave as instructed??
- Pls RESTART iLock2 after any registry settings is made.
- If "Password/Pin Lock" or "Owner Information" are enabled to display at wake up, S2U2 may cause the screen flicker?!
- Pls disable these functions. Besides, it'll break the CallerID function!
- My device's special Keys are not blocked by S2U2?! (e.g. HTC Touch, the camera key on some devices...)
- This is a device specific problem that cannot be resolved.
- Error: UserNotification has too much records?
- That means the notification database contains more than 500 records. It'll ruin the Autostart of S2U2. Pls use other s/w (SK Tools, Memmaid etc) to clean it up first.
- The quality of the CallerID pic is so bad even the original photo is in high quality?!
- DO NOT use the system contact to add photo to a contact. Use other s/w like Inesoft Address Book or PocketCM to update the photo.
- How to mute an incoming call when CallerID is enable?
- PRESS the volume up/down keys.
- After soft-reset, the first call's callerID is not shown sometimes?
- It's an OS issue, no solution yet.
- How to restore the system caller tab?
- set CallerID to 0 or uninstall S2U2, then soft-reset.
- Some keys are not blocked?
- Please check if you have installed any key mapping s/w that will break S2U2.
- My device shows a blank screen on start?
- It's not compatible with S2U2. It's a h/w problem & could not be solved.
- Some of my scheduled tasks did not as schedule, but it'll start when manually turn on the device?
- Try to set a longer OffLCD (17 seconds or longer).
- Some of my device's background jobs (like email sync or bluetooth connection) stopped unexpectedly when S2U2 is running?
- Try to enable NoPowerSuspend.
- NOT Compatible devices: SX66, Xda IIs (Blue Angel)
- NOT Compatible s/w: AEButton, WA3, RealVGA
Trouble shooting:
=================
If you find your device is hang with a blank screen or no response with any key or screen-touch, you may not need to reset it. Please follow these steps if your device has a camera button:
- press the camera button to invoke the built-in camera program
- press the end call button to go back to Today screen
- use Task Manager (a third party freeware; highly recommended) to close the S2U2.EXE
Special Thanks:
===============
- Forum fellows at xda-developers (http://forum.xda-developers.com). Thank you for your testings, comments, supports & patience.
A_C said:
Hey guys,
http://ac.xenpage.eu/S2U2-0.7-WM5.rar
http://www.mediafire.com/?cy0vmezxxnt
Click to expand...
Click to collapse
Thanks for the update.
But seems the first link is dead.
h0228631 said:
Thanks for the update.
But seems the first link is dead.
Click to expand...
Click to collapse
Thanks. It's corrected.
great work thanks man...
Still have an issue when running with RealVGA in 128 dpi and 96 dpi mode on XDA Universal
S2U2 only displays properly when running at 192dpi mode - at 128dpi mode the text and clock shift to the right and at 96dpi the clock and text shift way off right off of the screen
When running at 128pdi or 96dpi - the slider bar does not show. So it is very, very hard to get out of lock mode.
A_C, trying this new version, but stuck on a couple of issues,
caller id, my contacts are all setup as +44 ...... it dosent appear to pick that up only the 07867 .......
maybe a reg key to put custom country codes into?
I also have a spit second displaying of the original WM caller tab appear, its not to bad, as by the time ive got to my phone in a normal "it started ringing in my pocket" its back to S2U2 caller id.
What are the VGAfix, Speed, and ShowWeather settings?
can you expand on how to set these up? as im on a WVGA g900 and its working sweet anyway so im intrested in what the vgafix and speed options will achieve. the weather im personally not to fussed about but might use it
Top marks, its getting slicker and slicker i have to say
just test this version.
excellent.
able to view caller phone number directly on the screen in additional to the total number of missed calls.
great.
Thank you for update
hello. great app.
i'll be glad to help with english->french localization !
darkblak said:
Still have an issue when running with RealVGA in 128 dpi and 96 dpi mode on XDA Universal
S2U2 only displays properly when running at 192dpi mode - at 128dpi mode the text and clock shift to the right and at 96dpi the clock and text shift way off right off of the screen
When running at 128pdi or 96dpi - the slider bar does not show. So it is very, very hard to get out of lock mode.
Click to expand...
Click to collapse
I've already told you it's the RealVGA's problem, not mine. If you need RealVGA, S2U2 is not suitable for you. FULL STOP.
@Carnivor
It simply follow the system's built-in phone no. format. No customization could be made. The VGAfix, Speed, and ShowWeather are only used in S2U, not S2U2 any more...
Carnivor said:
I also have a spit second displaying of the original WM caller tab appear, its not to bad, as by the time ive got to my phone in a normal "it started ringing in my pocket" its back to S2U2 caller id.
Click to expand...
Click to collapse
Me Too.
But the Problem with CountryID i dont have. It shows me the Name.
Thanks A_C for the CallID
Hallo!
Sorry, but no caller ID on my TyTn.
Yes, I restarted S2U2 and I also tried soft-reset.
There seems to be no difference for my device between caller-id set to 0,1 or 2.
The scree is always displaying the original WM caller tab.
Also there is no
"when CallerID is enabled, & when a call is missed, a "Missed Call" will show who made that"
on my device.
For me there is no change to v0.60 but I am shure you will have a fix for that
I am really waiting for the "slide to answer"-feature. Will we have it in v0.8?
Thanks a lot for your work...
JueLue
JueLue said:
Hallo!
Sorry, but no caller ID on my TyTn.
Yes, I restarted S2U2 and I also tried soft-reset.
There seems to be no difference for my device between caller-id set to 0,1 or 2.
The scree is always displaying the original WM caller tab.
Also there is no
"when CallerID is enabled, & when a call is missed, a "Missed Call" will show who made that"
on my device.
For me there is no change to v0.60 but I am shure you will have a fix for that
I am really waiting for the "slide to answer"-feature. Will we have it in v0.8?
Thanks a lot for your work...
JueLue
Click to expand...
Click to collapse
What's the language of your device? Could you post a screen-shot of the original WM Caller tab?
A_C said:
@Carnivor
It simply follow the system's built-in phone no. format. No customization could be made. The VGAfix, Speed, and ShowWeather are only used in S2U, not S2U2 any more...
Click to expand...
Click to collapse
Ok, thats cool, i can just ignore the vgafix etc, i thought it strange they appeared installing this version and none of the previous s2us's
Also ive sussed the strange anomoly of +44 unknown contacts, i had spaces in the number, removed all spaces and its working fine.
Now were rockin!
Works perfect..
The only thing did not like what happened was that when i missed a call,
that my touch brings a notification about it and pushes it in front of s2u2..
but this is only for about 5 - 6 seconds
This by the way also happens with PocketCM, this will push it self in front of s2u2 when i get a sms.
The rest of it.. looks fine at the moment..
love it!!
hope that the problem that i had about my files on the storage card being loaded slow had to do with the setting: turn device off / turn lcd off
just 2 questions...
What does it actually do when the option turn off device is selected?
and what is: nopowersuspend
what does it do or not do?
Thank you!
close application
Hi A_C,
If I have an opened application (RescoExplorer), after that I slide to unlock and appear the today screen, the application comes closed.
It is corrected this behavior? if yes, who can I make to avoid that S2U2 closes the applications in execution?
NB: with the same settings this did not happen with version 0.6
thanks and optimal job
-> Edit: after many tests I have see that it does not make it always , therefore not to consider "reliable" this post; if I will be able to reproduce the behavior, I will make to know.
A_C said:
What's the language of your device? Could you post a screen-shot of the original WM Caller tab?
Click to expand...
Click to collapse
Hi,
In my Spanish ROM the message is "Teléfono: recibiendo..."
thanks
It is possible to deaktivate the originam CallID from Windows Mobile?
Because when i´m pressing the red or green phonebutton from s2u2, the original CallID comes for a second in the front. That don´t look so nice!
Hi A_C,
functions all super.
For me the best Prog. off my Device.
Thanks & Ciao Jörg o)

[Sept 14th]XML skinnable Today screen-No Mobile Shell or 3rd party apps required

No install required - No Mobile Shell required - No third party programs required - this replacement for your Today screen is fully contained - and fully FREE!
FOR ANY INTERESTED PARTIES I HAVE UPLOADED THE SOURCE CODE NOW TO THIS PROJECT AS I HAVE NO MORE TIME FOR IT.
PLEASE FEEL FREE TO USE ANY OF IT AS YOU SEE FIT - HOWEVER IF YOU USE MY ALPHA TRANSPARENCY CODE PLEASE GIVE ME SOME CREDIT IN YOUR PROGRAM AND LET ME KNOW ABOUT IT!
Please note - this software is still under development and as such may contain bugs and empty pages until things are programmed - if this worries you or scares you please do not try my software!
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
Skin packs:
http://forum.xda-developers.com/showthread.php?t=415563
http://forum.xda-developers.com/showthread.php?t=417423
http://forum.xda-developers.com/showthread.php?t=414699
Every resolution is supported. The two configuration files LANDSCAPE.XML and PORTRAIT.XML contain the screen size and button layout positions - if you have a differente size screen you can simply edit these two files to move the buttons around - full instructions are included in the XML file
So I have seen the great work that people have been doing here - and I absolutely love the themes from Greatbal - but the overhead from SPB (and having to have it installed) do not seem to justify the actual overhead.
I decided to start writing my own fully customizable fullscreen page - this will be updated as I add more features - and will post the executable for people to send and leave me feedback!
Transparencies are fully handled.
If you like the application and want to support me - you can do so with my Paypal link below - it is set to just $5 as I think this is plenty for anyone that so wishes to donate (all donations are going to be sent to Great Ormond Street Hospital here in the UK). THANKS!
https://www.paypal.com/cgi-bin/webs...y_code=USD&lc=GB&bn=PP-BuyNowBF&charset=UTF-8
DONATIONS from (first three letters of each name only for security) : Guv Ata , Joh Sha , Han Fuc , Tim Cro , Lou B , Chr Car , Man Oso , Ace Ace , Bob BBQ , Mic Kat , Ric Pla , Dea Dic , Ali Ama , Pet Hah , Vin Mac , Con Whe
THANKS!!!!!!
FAQ:
Q. It crashes because of xxxxx
A. First try copying and running the files from system memory as some devices (HTC Touch) have issues resuming from standby with program running from the storage card. If the program still fails - edit the config.XML and select YES for errorreporting - then run the program - when it crashes post the errorreport text file here and I can try and help you.
Q. Why is there nothing on the calendar or music or blah blah page?
A. Because the app isnt finished yet - as clearly stated above! - more is being added
Q. What version of WM do I need?
A. 6.x - it does not work on WM5 or below
Q. How do I install it?
A. You dont! - simply copy all files to a folder on the device and run the EXE - that's it - no install - no uninstall - nothing changed on the device - no registry entries required.
Q. What is the default unlock sequence
A. 1 single guesture - ^ (you can change this on config.xml)
Q. Can I change stuff?
A. Yes - everything! - the landscape.xml and portrait.xml contain all the positions for the icons and layouts for the skin, while config.xml contains details about non-skin related options
Q. What Compact Framework do I need?
A. You need either 2.0 or better still 3.5 - unfortunately some custom rom cookers have not fully incorporated CF into their build and this may cause you problems - not just with my app but anything that uses CF. My only suggestion here is to try an updated (or different) base rom! - it works perfect with all the WWE builds with CF installed - so I know it's the rom
Q. I get a white screen when starting the program
A. This can be caused by two things - either you did not UNZIP all the files into a directory (this will contain the program files and TWO sub directories :- PNG and WAV) or it can be caused by a problem with the custom ROM you are running and due to the cooker not implementing the compact framework correctly - and the only solution to this is to use a different rom (this will affect all programs that try to access these portions of the CF not just mine)
Code:
TO DO :
* move contact loading to calendar thread
* AlarmNotifications for sms/email/phone/voicemail - repeating alert sound
* screen off button for tab 6 (temp)
* soft reset button for tab 6 (temp)
* extend missed notifys to 9
* MMS Status icon
* Vibrate on volume control
* Voicemail icon dial voicemail
* MP3 player integration
* Weather
* Flo style favourites launcher
* Add optional notify icons for additional email accounts
* BUG : current days appointments displayed in reverse order
* BUG : lock keys unlocks after system notification
* BUG : Fix font sizes for VGA devices
* LOTS MORE!
Code:
Changes :
V.276 - International fixes!
V.275 - Clock 12/24 hour selectable in config.xml - also clicking clock takes you to clocks/alarms
V.274 - Missing draw bottom line fixed
V.273 - Finger Friendly launcher
V.272 - Launcher code tidied up
V.271 - Optimized launchers starting programs
V.270 - Font fix for launcher page
V.269 - Launcher skinned and options available
V.268 - Launcher Main code implemented
V.267 - More Apps added to test launcher
V.266 - Launcher fix
V.265 - Dim screen options
V.264 - App launching begins!
V.263 - Lock fixes
V.262 - More locking checking
V.261 - Lock error checks added
V.260 - Calendar updated edition
V.259 - All 3 lock levels now implemented
V.258 - More configurable email/SMS icons
V.257 - A2DP icon added + launcher icon added (skinners need to update XML)
V.256 - Bow down to pressure edition
V.255 - All errors logged now
V.254 - Screen redraw routine modified
V.253 - screen update and refresh after rotation handled faster now (less/no white block)
V.252 - Power/lock code re-written - calendar code re-written
V.251 - Even more error reporting - will now report Drawing:xxxx with the name of the icon its attempting to draw - useful for crash reporting
V.250 - Locking code updated
V.249 - Even more error reporting
V.248 - More error reporting
V.247 - Fixed glitch with notify icons not displaying properly
V.246 - FLO test screens removed - skinners can test all pages now - graphics fix in PNG alpha routines - GFX look much better now
V.245 - Appointments back - more error trapping - unlock changed to single UP guestuere - calendar centralised
V.244 - Erorr logging to file
V.243 - Calendar temporarily removed to test crash fix
V.242 - Manual Lock icon added to page 6 (can be moved via XML to any pages)
V.241 - LockTastic!
V.240 - The lock for all edition :D (hopefully)
V.239 - Still fixing the SX66 power on :(
V.238 - Smartphone power detect routines added
V.237 - new flo crashes stopped - also for skinners errors in PNG load now displays which PNG is wrong
V.236 - Lock on power sorted?
V.235 - Page four contains debugging infro for power states
V.234 - Lock really is locked - no get around with phone key now
V.233 - Voicemail notify added - shows 1 if you have 1+ voicemails waiting
V.232 - Lock code reworked
V.231 - Lock page centralised, made more responsive, bugs squished
V.230 - Swish To Unlock Edition
V.229 - Image loading classes rewritten - loading should be faster and mem usage reduced
V.228 - The volume Icon working edition!
V.227 - Contacts test!
V.226 - more FLO adjustments - page 4 fixed
V.225 - the finger friendly flo edition!
V.224 - Flo speed in config.xml
V.223 - Guestures improved further - test pages for contacts on pages 4 + 5 - calendar fixed for not display highlighted day on next month
good work thanks
I'm not one to stifle innovation, but i'm curious how this is/will be different from something like RLToday
(both are full screen, and use XML for configuration)
http://rotlaus-software.de/forum/viewtopic.php?id=1171
RLToday:
1. vjtoggletodayiialpha to remove topbar and bottom bar.
2. vjokbutt / mortscript to have X/OK icon we you lanuch application.
3. Mortscript to have Signal, battery, Wifi, Bluetooth, Volume on our new customized topbar.
The program I am using is pure .NET - no mortscript, no vjtoggle required to create full screen
I intend to replace all the original functionality of the device where possible.
The one thing I cant stand is a beautiful today screen and when you press the "messages" button you get the bloody horrible white page with the message display - I intend this to replace the messaging, calendar and contacts sub pages and make them feel a lot nicer to use.
I am using the full API and some imported DLL calls to reference the information on the device directly instead of using scripting programs - and as such as you can see - it's tiny in size and runs very quickly!
I have also already managed to code left and right guestures for page swapping although they are in the code provided - the guestures currently do nothing.
looks VERY promising, will keep an eye on this thread!
this is indeed very promising n will help to reduce the use of multiple programs and plugins
Nice! Sounds like alot alot of work...hope you find somebody to help you ! GL !
Nice work
It looks nice and promising, keep up the good work. I wish I am good at art work.
Hopefully somebody with good art sense will help you. Good luck friend.
Sounds like a cool idea.
1. How did you replace the home screen?
2. iContact has a fairly portable titlebar module you could use... it's in C++ win32 though.
The home screen isnt actually replaced - it's still running behind - the key is to use the API's to adjust the window up and over the title bar and make my app foremost so it takes over.....you can see the start menu still working by pushing your "windows" soft key - the menu will still pop up bottom left - although I need to make the title bar visible again when my application loses focus - something to do.
The main screen is actually just a custom built graphic which is updated periodically - but that has events behind it that detect "zones" on the page for clickable areas - the page is re-drawn in the back buffer and then flipped to the main screen to prevent any flicker - currently the display is set to update every 5 seconds - need to assess battery performance based on update speed.
The advantage is that because the page is built up from "element" small graphics pieces that can be interchanged or replaced totally and also resized to anywhere on screen - the layout is completely changeable!
dazzlingdaz said:
The home screen isnt actually replaced - it's still running behind - the key is to use the API's to adjust the window up and over the title bar and make my app foremost so it takes over.....you can see the start menu still working by pushing your "windows" soft key - the menu will still pop up bottom left - although I need to make the title bar visible again when my application loses focus - something to do.
The main screen is actually just a custom built graphic which is updated periodically - but that has events behind it that detect "zones" on the page for clickable areas - the page is re-drawn in the back buffer and then flipped to the main screen to prevent any flicker - currently the display is set to update every 5 seconds - need to assess battery performance based on update speed.
The advantage is that because the page is built up from "element" small graphics pieces that can be interchanged or replaced totally and also resized to anywhere on screen - the layout is completely changeable!
Click to expand...
Click to collapse
Oh, in that case, you could make the carrier, battery, signal strength, etc., configurable too!
They already are! - download the program and try - the icons at the top are all png/jpg/gif files in the PNG directory and the size and position of the icons at the top can be configured through the XML file in the application directory
<OperatorTextX>0</OperatorTextX> <X location of operator text
<OperatorTextY>0</OperatorTextY> <Y location of operator text
<OperatorTextSize>7</OperatorTextSize> <operator text size
<SignalX>155</SignalX> <signal strength x pos
<SignalY>0</SignalY> <signal strength y pos
<SignalW>25</SignalW> <signal strength width
<SignalH>10</SignalH> <signal strength height
But still everything that is included up to now - is all within 55K!
dazzlingdaz said:
They already are! - download the program and try - the icons at the top are all png/jpg/gif files in the PNG directory and the size and position of the icons at the top can be configured through the XML file in the application directory
<OperatorTextX>0</OperatorTextX> <X location of operator text
<OperatorTextY>0</OperatorTextY> <Y location of operator text
<OperatorTextSize>7</OperatorTextSize> <operator text size
<SignalX>155</SignalX> <signal strength x pos
<SignalY>0</SignalY> <signal strength y pos
<SignalW>25</SignalW> <signal strength width
<SignalH>10</SignalH> <signal strength height
But still everything that is included up to now - is all within 55K!
Click to expand...
Click to collapse
Hope you can keep working on this as it is quite promising.
sounds good, a new fullscreen skinnable gui that needs no other apps. i only know two really good ones: mobile shell and pointui. pointui has a batteryproblem and isnt skinnable and mobile shell isnt freeware hard to skin.
But you will have a lot of work man. thanks and good luck.
Ok - am going to leave the rest of status icons for the moment - I have all the API references for Bluetooth, GPRS, Edge HDSPA etc to see if they are active or not and will put them in in due course.
Next I am going to work on the new "send SMS" screen - this is going to be a total replacement for the horrible white screen sender - much more like the diamond SMS screen - but I found that to run really slowly on my Kaiser (under the mobile shell) - so will hopefully be making a much quicker version!
First thing to do is the screen layout - again the size and position of the entry box and the name box and the background will be customizable through the XML - yes - I am making everything move/sizeable lol.
Next will capturing the keyboard input to the boxes and finally using the SMS API to send the mesage and return to the main screen.
Looks promising, I'll be checkin this out the next days.
Keep up the good work!
wow this is amazing...one question will the sms program be a replacement threaded style ap or just to send? If this becomes something like point ui but with complete control that would be awesome. keep up the good work.
I intend a full SMS replacement UI - the SMS sender screen is already done and will be uplaoded shortly - the SMS history will also be completely re-written to be able to be viewed threaded or non threaded - however you want to see it! (hopefully)
thinkin of flash integration?
No plans for flash - but I can play flash moives through the .net framework - although - my aim to make a fast replacement.
Please see the latest version for bringing up the SMS screen - it is INSTANT - makes you wonder what MS is doing with their screen and why it's so slow at loading

[Ideas] Realistic and usable Titanim plugins

I had a couple of ideas but my programming skills outside flash are poor at best.
I wanted to make a plugin packed much like AnalogClock that is a all-in-one plugin with severall features.
All these ideas can be done with a MORTSCRIPT file!
I tried to do a EXE file in flash that would update the registry much like a MSCR file, but it steals too much RAM and BATTERY when left ON after a few hours.
So I'll just leave the ideas here, in case anyone wants to pick them up.
Animated clock:
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
ALREADY STARTED ON POST #2!
It reads the current time and updates the regkey on the fly, but with a small twist:
If the current minute is different from the last X saved on the registry...
...runs this animation:
Save image name Xa on the registry
Wait 1/10 of a second
Save image name Xb on the registry
Wait 1/10 of a second
Save image name Xc on the registry
Wait 1/10 of a second
etc...so that we could display the same animation as the Diamond M3D clock.
This would require images with numbers 0-9 and their subsequent animation frames (5 should be enough)
If the digits were semi-tranparent with a glass glow, it would be extra good.
NOTE: Wouldnt advice having a seconds tab, as it would be always changing.
---------
Micro notifications:
ALREADY STARTED HERE!
http://forum.xda-developers.com/showthread.php?t=523015
Pretty much what I already did as a test here:
http://forum.xda-developers.com/showpost.php?p=3862296&postcount=475
...but with some extras:
The regkeys could change and make the numbers and icons disappear if they where equal to zero, by replacing the regkey filename with a blank png.
And the main button would change to the phone history or messages link when a call was missed or new unread sms existed.
So the icons would only pop-up when they were needed, and when they did, the main link would go to them.
------------------
Image viewer (stand-alone plugin):
ALREADY STARTED HERE!
http://forum.xda-developers.com/showthread.php?t=523015
Better than the one we have already...
Already explained that here:
http://forum.xda-developers.com/showthread.php?t=520488
...with possibility of a extra slideshow, as already done in the AnalogClock plugin.
-----------------
SMS viewer (stand-alone plugin):
ALREADY STARTED HERE!
http://forum.xda-developers.com/showthread.php?t=523015
Much like the notification of a new message, but with the help of APBilbo's message2reg.exe.
Already explained that here:
http://forum.xda-developers.com/showthread.php?p=3832398
DigiClock Quick test for QVGA
i'm trying the animation clock
attached is a quick test for qvga only
the animation not very smooth
Thats great!
I am currently trying to pull off a mortscript that does all this below:
So, the micro notifications I talked about above are suposedly working, it leeches of the titanium weather for the weather icon and temperature (no point on getting this onfo online, as that plugin is much complete), gets the system values like the system panel (but its based only on mortscript alone, no extra EXE's), and shows a clock based on pngs, much like analogclock's digital clock (not animated, hehehe).
I just need the date settings right and then learn how to do a titanium plugin, that I can change easily (I currently using the SYSTEM PANEL to test my mortscript file), but never did one myself.
I would like to see the SMS plugin in action. Looks promising to me.
However, what about a skype plugin for Titanium? There could be several options:
- Launch Skype (Right Softkey)
- Page1: Show amount of online contacts (ActionURL= Launch Skype)
- Page2: Show active chats (Username + Message/Topic)
- Page3: Show missed Skype calls/events
Or even a general "chat" plugin with Skype, WLM, FIM, ICQ, Fring etc. ?
I'd love to see a working notification panel myself. The stand alone one has overlapping txt in the notification areas on qvga and it doesn't look like its gonna get updated.
i'll have to try this one later on thanks.
Managed to make it work... and only with a MortScript that uses less than 150kb on the system.
When you receive a call or sms, the icon pops-up and the main button is used for accessing the call history or messages.
The icons arent showing in this screenshot because I didnt received any sms or call, lol.
The battery icon becomes on fire when its being charged.
The system bars show you your free mb and a visual percentage of how much that is (Mortscript only supports 2gb cards for now)
The clock can be easily skinned, as its simple png files.
To try (remenber its not finished) - QVGA ONLY!:
--------------------------------------------------
- Install System panel (I'm using it for tests until I learn how to create a plugin, shamefull... I know )
- Install Titanium weather (if for some strange reason you havent already, also configure your city on it).
- Install the Beyond Invisible Weather Icon pack, for some reason the CPR doesnt fix the icon sizes yet... :/
- Remove the shortcut to Memstatus.exe that the System Panel plugin installed on your Windows\Startup folder, because its not used by my plugin.
- Backup your \Windows\Titanium_240x320.cpr file.
- Install my files into your device (note that the CPR must be overwritten, if it gives you any trouble, use Resco Explorer)
- With Titanizer or Chome editor enable the System Panel plugin (if it isnt already) and move it to the bottom (so that its not on top on anything else).
- You can now remove the exe from the System Panel of Startup.
- You can customize some settings if you open the \My Documents\Themes\Titanium System Panel\TWolf.mscr file on notepad,
- Reset and enjoy the BETA!
---EDIT----
Small bugfixe, update my MSCR file into the \My documents\Themes\Titanium System Panel\TWolf folder.
There was a small bug when the plugin had a missed call or unread sms.
---EDIT 2----
Fixed the "on missed call" bug (it wouldnt jump to the call log).
Attached the latest MSCR.
---EDIT 3----
Did more changes on the MSCR file, separated the updates into 2:
- The clock, notifications and battery charge icon update every second.
- All the rest, every 10 seconds.
There are more customizable settings and are easier to change.
Also added the condensed view regkeys, but havent had time to change the CPR file yet.
Tryed a different version where the script would first check if the regkeys had changed and only then would change them, but that took more ram to run, so as it wasnt serving its purpose, I went back to the old way.
---Edit4---
Some extra notes:
At first I was thinking of a bigger size panel, true, but that forces ppl to change the design or layout of all their other plugins, thats why I was going for the default only.
So with that in mind, I was thinking (just thinking, for now) that my plugin could show:
- The clock, weather icon, date and notifications on a normal view (First page), that jumps to a pre-chosen app on clicked (Resco explorer, yey), if a notification existed it would jump to their app and on the right softkey link would make the weather update (its doing this already).
- The system settings + battery and network info on the second page that when clicked would go to memory settings, and the plugin settings could be the right softkey link.
- A image "slideshow" of a pre-chosen folder on the third page, that when clicked would change to the next picture (bottom link would go to album).
- On the fourth page a sms messages tab that would show the latest message and on clicked would show the next and so on... The right softkey would jump to all the messages.
- The clock, weather icon and notification icon (no text) on condensed view.
- The settings app (user customization) would be a flash EXE file that would save stuff in the settings (much easier for me to do )
Not sure yet how I'll do all this, but it all seems pretty duable on mortscript.
Would only do a QVGA version, since its all I could test.
This does not exclude my idea that the messages and album (explained on the first post) should have their own plugin.
But maybe after I do these, part of the code could be reused for someone else with better programming skills.
yea i def wanna change my clock
I followed your instructions on a fresh install with nothing added.
1) system panel
2) weather 4.2
3) copied files and below is what I get
Uh, your not the first to have that bug, for some reason the icons dont get resized on the cpr... :/
To fix you need to install and apply the excelent Beyond Invisible weather icon pack.
twolf said:
Uh, your not the first to have that bug, for some reason the icons dont get resized on the cpr... :/
To fix you need to install and apply the excelent Beyond Invisible weather icon pack.
Click to expand...
Click to collapse
Ok ill do that here real quick..oh and what .exe am i suppose to delete? isnt the file you have me copy there a mortscript file?
MrDSL said:
Ok ill do that here real quick..oh and what .exe am i suppose to delete? isnt the file you have me copy there a mortscript file?
Click to expand...
Click to collapse
Just the shortcut on the startup to memstatus.exe, its from the system panel, but its not used on my plugin change.
Also, found a bug in my MSCR, ill update the post with the fixed file.
it had a int(x) code to make number into a full decimal number, but mortscript cant recognize it like that... :/
Still looks the same with installing those beyond icons..
I assume I'm using all the same mods as you since theres only one of them but could you post the cabs your using to get this going just in case?
MrDSL said:
Still looks the same with installing those beyond icons..
I assume I'm using all the same mods as you since theres only one of them but could you post the cabs your using to get this going just in case?
Click to expand...
Click to collapse
i had that problem too but i made it work
its on the cpr cant remember were i found it but ill give you link as soon as i make this thing work.. gave me errors... and i dont c the plugin at all
only the system panel with big "x"
edit
does rperia's panel has to be install? because i only c the system panel not the other tab for the time ..
i did everithing and this is how it looks T_T
MrDSL said:
I assume I'm using all the same mods as you since theres only one of them but could you post the cabs your using to get this going just in case?
Click to expand...
Click to collapse
Im using the latest ones:
TitaniumWeatherv4.2
Titanium System Panel 2.3
magicalan said:
i did everithing and this is how it looks T_T
Click to expand...
Click to collapse
Looks to me that CPR isnt mine.
Use Resco Explorer to really overwrite yours.
Updated post #5 with the latest mscr version, it fixed another bug.
does rperia's panel has to be install? because i only c the system panel not the other tab for the time ..
magicalan said:
does rperia's panel has to be install? because i only c the system panel not the other tab for the time ..
Click to expand...
Click to collapse
No, nothing else has to be installed, only the mentioned 2 plugins and my files.
If you get that error its because you dont have the htc taskmanager app, but thats ok, its not important, you can change the main link to any other app you like in the SETTINGS area of my latest MSCR file.
I just used that one because it was already the default on the system planel.
am not going to the gym today to fix this hope it works
the new freaking rom i downloaded doesnt let me replace the Titanium_240x320
not even with resco because it says its a "rom " file
what other can i use
when i try replacing it..it actually does replaces it but i can delete the new one and the old one appears.. what the
Cant help you there...
Had the same issue with HTC Album 3, had to hard-reset.
twolf said:
Cant help you there...
Had the same issue with HTC Album 3, had to hard-reset.
Click to expand...
Click to collapse
but if i hard reset will it still be a rom file?
because it will still have the rom installed.
rPereira talks about a possible fix here:
http://forum.xda-developers.com/showthread.php?t=509492&page=3
Also, please please stop PM-ing me! This is a forum, not a costumer service, lets talk on the threads.
You sent me more than 20 messages this week alone.

Categories

Resources