Hello, I have a Qtek 9100 and unfortunately I dropped it and scratched the front of the casing up pretty bad. The phone is still in perfect condition and not even a scratch on the back or the screen. I am looking for the front housing. I do not have any scratches on the rear housing, keyboard, or even the battery cover. I have looked on Ebay and the only thing that I have found is for around $100 (US). I do not want to pay that much for something that I can conceivably drop again. So my question is; is there anyone out there that knows where I can get a front housing? I would even buy the total housing to use as a backup but I do not want to spend an arm and a leg for it. I would greatly appreciate any feedback anyone has.
im looking for one myself.. i dropped my imate kjam a numerous amount of time...and the body has been scratched up rpetty bad
if theres a way to get it in canada, ottawa.. id really appreciate to find out..
thnx
How about vinyl sticker to put on top of the scratches? Like those offered by mytego.com?
you can see how it look like from this thread at howardforum
http://www.howardforums.com/showthread.php?t=968555
That's my phone in the post by username ToNg
Oh. That's slick the way the background and vinyl work as one.
Hi I have a Cingular 8525 and as usual due to my clumsiness I have drop it twice on the cement. Everything's working fine but being a person with a mild case of obsessive compulsive behavior I am buggin......
Also if you guys are looking for a case for your Hermes you should try to avoid this style. My 8525 was securely in this case and the phone 'flew' out of it when it was knocked on the front side of the case. The phone flew out knocking the battery boor, battery, and the sim right out of the phone. Not good! Also, the case uses a magnet for the flap closure so it goes without saying it is sending my phone into periodic landscape mode whenever I remove the phone from the case.
I have tried ebay for a replacement case and unlike all my other phone nothing is available and I mean nothing. Not even one cheesy knock off is on there for this phone.
Has anyone here looked into getting an OEM housing for the 8525?
Personally I would prefer to keep the phone in a 8525 case versus changing it out for other verients.
Sorry for the long post.....I'm sick in bed with a 103 fever so I figure that I would bug u guys
Thanks.
Derek
Looking for same for TyTN
I need a tytn oem case as well. I dropped and scratched mine. Irony of it is, I've had it for two months, purchased invisible skin two days before I dropped it - idn't get a chance to put it on before i dropped it!
Oh and mine was in a metal case. It rell out of that! So nothing's safe. Gotta put on invi skin!
try this
checkout this site. it has pretty much everything that is available.
you might want to invest in the hard metal case : )
http://www.thepocketsolution.com/cingular_8525_accessories.html
armedmetallica said:
I need a tytn oem case as well. I dropped and scratched mine. Irony of it is, I've had it for two months, purchased invisible skin two days before I dropped it - idn't get a chance to put it on before i dropped it!
Oh and mine was in a metal case. It rell out of that! So nothing's safe. Gotta put on invi skin!
Click to expand...
Click to collapse
Did you happen to adjust the hinge(simply by bending it inward slightly) before placing your Hermes inside. I have an aluminum case, and I've test dropped it, and nothing happened.
***Please not from the factory, the hinge merely "clips" over/on the other side of the aluminum housing. If you want to make it more stable you have to slightly bend the "lip" that connects to the lower portion of the housing. YMMV. I had to readjust mine once as the first time I had it way too tight, and it was very hard to get my Hermes out of the case. Now it simply closes with an authoritative click, and I know my Hermes is secure.
Anybody find a place to get the housing for an 8525 yet? There is a large (its not that large, but its visible enough to be annoying) gash on the metal bezel running along 3 of the 4 sides of the display of my 8525
im new to the forums, but my 8525 got knocked out of my hand and got pretty messed up. my "t" key has also started to lift off of the pad. i wanted to know if this has happened to anybody and if there is any replacement keyboards for sale also. can i swithc over to the tytn with the proper front keyboard? any help would be amazing.
i just bought a dummy 8525 off of ebay, Im not sure how they are made, but I am going to see if I can switch the housing
please let me know how it works, i was thinking of doing the same thing...
itlynstalyn said:
please let me know how it works, i was thinking of doing the same thing...
Click to expand...
Click to collapse
The dummy thing did not work, it isnt an actual housing, only the front buttons work, the rest are fake and do not move, there isnt even a real battery cover, its one piece. That was a waste of $10.99
still really desperate to get a new housing, anyone know where one is available?
http://cgi.ebay.ie/OEM-Housing-for-...temZ260100290172QQcategoryZ3728QQcmdZViewItem
Well let me add that I am not the seller. so don't ask me any questions, but this is a seller I have bought housing for my imate jam before...
hrm, sorry about bring up an old thread, but I thought it would be easier than starting a whole new one.
I'm purchasing a used dopod 838 pro sometime this week, and was looking to get a replacement housing for it as it is fairly abused. Would something like the above posted (HTC 8525 case) work well? I notice that, that case doesnt have a powerbutton on the front of the case, will this cause a problem when I go to replace the housing?
Ta.
BSoD_leet said:
hrm, sorry about bring up an old thread, but I thought it would be easier than starting a whole new one.
I'm purchasing a used dopod 838 pro sometime this week, and was looking to get a replacement housing for it as it is fairly abused. Would something like the above posted (HTC 8525 case) work well? I notice that, that case doesnt have a powerbutton on the front of the case, will this cause a problem when I go to replace the housing?
Ta.
Click to expand...
Click to collapse
If should be ok, but you wont have the power button on the right side... ahahhahah it would jzu be a 8525 hahah
Why dont you juz get this one instead... tho
http://cgi.ebay.ie/For-O2-Trion-iMa...ryZ15039QQrdZ1QQssPageNameZWD2VQQcmdZViewItem
armedmetallica said:
purchased invisible skin
Click to expand...
Click to collapse
armedmetallica, where did you purchase the skin from? could you please PM me, thanks!
I know this is an old thread, but i found this place and its pretty pricey...
http://www.cellphone-repair-shop.com/products.php?cat=156
Has anyone found any other place... to get OEM replacment parts..
I know this is an old thread, but i found this place and its pretty pricey...
http://www.cellphone-repair-shop.com/products.php?cat=156
Has anyone found any other place... to get OEM replacment parts..
http://cnn.cn/shop/tytn-grey-housing-p-1295.html
There you go guys.. I dropped my phone before christmas, and broke the latch that holds the battery door on, and I had to use some tape for awhile. I must have ordered one of the last Cingular 8525 cases, since all they have is the HTC Hermes black cases with the front camera hole.
That shouldnt be too big of deal to you guys though looking for new cases. It took about a week and a half to get here (FL, USA) from Hong Kong at Christmas time. Very good site..
spanky310 said:
Also, the case uses a magnet for the flap closure so it goes without saying it is sending my phone into periodic landscape mode whenever I remove the phone from the case.
Click to expand...
Click to collapse
I use a case with magnetic closure..............I put the device into the case with the screen facing away from the magnet and I have never had any issue with it.
http://www.gsm4world.us/shop/cingular-8525-8525-c-210_276.html
55 bucks and your back in business
I am having the same problem sourcing the correct housing for my phone. I am from the UK and have searched high and low to find a housing for the UK equivalent the SPV M3100 (HERM100 - so the label says).
I have checked all the sites mentioned above, at cnn.cn they dont have the correct housing as the front buttons are different? and the cingular housing is 1: not a nice colour! and 2:L i dont know if this includes the mid plate as well.
Does anyone know where i can get hold of the correct housing(not silver) i dont mind the branding.
Hi, I have a white trinity at the moment, I've tried to like it but really I know I want a black one...any ideas on how to change the casing? Is this possible...or perhaps painting it?
eBay
I don't think you can paint it, it's some kind of 'piano paint' try eBay, i have found there a casing for my previous htc prophet.
If you painted it the paint would peel, thus giving you the authentic Black Trinity ownership experience.
You can always try this...
http://forum.xda-developers.com/showthread.php?t=307949
P.S. Bought a month ago, still no peeling
Hi guys, I bought a second hand athena and am well chuffed with it so far. I was wondering if the joystick should have some kind of top on it as I have just bought a pdair case and the stick is too low to access. If there should be one, can anyone tell me where to get a replacement or an alternative?
Cheers
Hi there, I'm not quite sure what you mean but the joystick - at least on my x7500 - is somewhat levelled with the PDA's metal case, so another leather case would make it less accessible.
You could try to replace the rubber head on top of it with a longer one, that could do the trick...
Btw: What did you buy? I purchased a PDAir, quite a good case.
I agree - its almost flush to start with. Might stick up a millimeter.
Hi Will,
I bought a pdair aswell (£15 delivered - bargain!). My "stick has no rubber tip on the end, it must have fallen off. I'll try and get a piece of rubber or something to superglue on so that it is easier to use.
Loving the ameo tho, I've now got tomtom working properly with a fast fix. Just trying to find some decent games to play on it now.
Phil