Is there a way to activate ringer on speaker and bluetooth headset. I am using MS Voice Command 1.6. Please let me know, really appreciate it. Thanks in advance.
Hey. I don't want to discourage you, but you can search the wizard forum for the fix. There's a cabfile for this which enables it through the registry. Unfortunately i don't have the cabfile at hand for you. Maybe someone else?
the forum is huge, i tried searching. maybe you want to be precise where and which forum.... or category.. I also try messing with MS Voicecommand i figure that when you enable annouce incoming call it only rings on ur BT Headset not on phone. If someone can provide me a fix which enable it using "announce on BT headset" also rings on the speaker would be awesome.
8525 and M$ VC 1.6
I too have VC 1.6 installed and though I can talk and listen to calls through the BT headset the voice commands and responses all come and go through the phone. I have been searching and reading (and still going) to try and find a patch for this.......Any pointers or links would be greatly appreciated.
Thanks
i installed my bluetoth and lost my ringer whether connected or not. I haven't been able to figure out what happened
Related
I have an XDA Exec and am using it with a Sony ericsson HBH 662 Bluetooth headset. They work absolutely great together and i can voice dial from my bt headset perfectly using the inbuilt Voice dialing.
However, i was attracted to Microsofts version of this, MS Voice Command, because it will verbally anounce the name (or number) of the caller. This, i thought would be simply perfect to use with the HBH 662, as it would save me from having to take the thing off my ear every time to see whos calling. (still much simpler than opening up the Exec!!)
I have installed the demo version of MS Voice Command and find that the caller id announcement only works on the device itself and NOT the BT headset. This defeats the object of me getting it, so i would really really like to know if anyone has a solution to this at all?
Please someone out there help me as if i could get this to work then im a very happy bunny!
Hi Goonerfish
you need to follow this thread:
http://forum.xda-developers.com/viewtopic.php?t=29837&highlight=
best,
mikey mike
Hi Mikey Mike,
Thanks for that. I had seen that thread but was unsure whether that would also allow the caller id announcements to be heard on the headset?
I know that with that thread you are able to voice command from the headset, but it is unclear as to whether the device sends the sound (incoming caller id) to the headset?
Have you tried this and can you confirm that it will work?
Also, i have noticed that the caller id alert is coming out pretty quiet? You had the same problem and do you know a way around that?
Many thanks
Goonerfish
hi goonerfish
no - the incoming caller id doesn't go to the headset - no idea how you do that - sorry.
the caller id alert conflicts with the ringtone so tends to be drowned out a bit - i find it really clear for appointments.
mikey mike
Hi all,
I remember seeing one post in this forum which talks about exec pairing up with my JABRA BT800 automatically during a new call ....
I searched with no gain
could you pls anyone of you point to the right thread or with info pls ?
Thanks
kasu
kasu said:
Hi all,
I remember seeing one post in this forum which talks about exec pairing up with my JABRA BT800 automatically during a new call ....
I searched with no gain
could you pls anyone of you point to the right thread or with info pls ?
Thanks
kasu
Click to expand...
Click to collapse
Come on guys....
does that mean no one using this automatic pairing ?
'm still being postive on this thread
Cheers
I would be amazed if it was true, it would be a huge bluetooth security hole if it was !!! if you can force a headset to pair with out authentication you can force anything to pair !!! are you sure you understood correctly
Don't you mean that the sound was automatically sent to the headset when a call comes in? Automatic pairing is something I have never heard of. I guess the guy paired his headset, so that when a call comes in, he hears it autmatically in his headset. Sounds more logical and feasible to me.
Why would you want to pair automatically anyway? Just pair it in the morning when you wake up, and use it all day till you switch it off. Only thing I can imagine would be battery save, but that would mean that an incoming call would have to activate both the BT on your phone and on your headset. And that is not possible, since without BT connection ( paired) no signals from the phone come to the headset.
ice_coffee -- Though I didn't see the subtle details of the mentioned software i think we'll have to pair with our BT device (proper authentication) which will be saved by the program and these details wud be used as and when incoming call comes ....
Koksie -- ur intuition is correct ....i.e. reason to do this stuff is to save battery.... bluetoooth drains exec very rapidly.....
if none of you all seen that post then i should be dreaming :!:
i'll continue my search and update the thread if i'm successful
Thanks for your inputs guys....
Cheers
Pairing is pairing but turning bluetooth on for an incoming or outgoing call is something else. PockeZenPhone has this option but it doesn't work cause it takes to long to turn on bluetooth and connect the headset before loosing your call.
Oh.. not it make sense. I think what he means is that, you had your headset and phone paired (with code and stuff). However, the headset or phone bluetooth may be off. And once there is a call coming in, it will switch on the headset/bluetooth on phone.
Hello,...
I am new here and thought you might help me with my little problem.
I allready searched the forum for that issue, but i did not find a real solution, so maybe someone can help me find a solution. Btw. please excuse my bad englisch, i am from Germany and really try my best.
Well, i have a german XDA Mini with BigStorage Rom 1.12.01 GER and Windows Mobile 2003.
I really have 2 problems now with the use of Microsoft Voice Command 1.5 and a Bluetooth Headset (not with Handsfree Profile).
My first Problem is, how can i make the Software response on pressing one of the 2 Headset Buttons. I really would like to initiate voice dialing with that so that i can leave the phone in my bag or whereever. I read something about a registry change, but i don't have that registry key, so maybe i need to install another software for that first.
If anybody could give me a easy to understand way to activate that, that would be really great.
My second Problem is, how can i use my BT Headset for the Audio Output. I can't hear the voice of Voice Command in the Earphone, it only plays on the XDA Mini itself. I downloaded a Bluetooth Stach Patch which gave me the option to stream audio to headset, abut my Headset isn't show in the list, and it does not work. I tried a Headset with Handsfree Profile from Plantronics (M3000), but it also did not show in the list. Can anyone help me with this ?
Well if could get this to work somehow that would be really really great...
Thanks in advance...
Thalys :?: :?:
Funny...I was researching this almost exactly as you were posting (research starting at XDA-Developers, of course!)
I found a rather distressing article at http://blogs.msdn.com/windowsmobile/archive/2006/02/03/524289.aspx that basically says that Microsoft Voice Command doesn't work over Bluetooth. HOWEVER, responses to the article reveal the registry hack to set Voice Command to the default Bluetooth dialer. It is:
HKLM\Software\OEM\VoiceCommand\Path=\Program Files\Voice Command\voicecmd.exe
I tried this on my Cingular 8125 with Motorola H500. Have to press the button twice (a problem also documented in the responses), and recognition is reduced, but it works! Voice Command audio is also piped to my headset.
--BennTech
Well, thanks alot for this tip, but it doesen't work for me. I tried changig the value to the path where my Voice Command is installed, but it did not do anything.
I think this is because i don't have a voice dialing software at all istalled on my device. Maybe i need to install another software first to activate the bluetooth support itself and than change the path to the program.
I figured out that i can make a redial with my headset without installing any software, so maybe there is a way to change this option to start voicecmd.exe.
I looked over the registry to find the key where the redial is initiated, but can't fins anything.
Has anyone done something like that ? I guess this is the only way to use voice command with BT Headset...
For all your help, thanks in advance...
Thalys
Sorry for Doublepost, but i wanted to say that the activation is now possible with the VCABT Project hack. That works now perfectly.
The only thing i wonder about is, is the mic in the headset used to recognize the voice ? Sometimes it is like still the mic in the machine is used.
I now only need a way to transfer the system audio to my headset... is that possible somehow ???
Thanks ... Thalys
@Thalys: If you'd know how to use a forum in the first place this whole thread wouldn't exist at all! It's all answered in the thread regarding the VCABT project. Since you found out about it I wonder why are posting those kinda questions... :roll:
Ok, sorry for that thread, it can be closed...
I did not read all the thread and thought that maybe another way is possible.
I now will keep an eye on the VCABT Project Thread to see if there is news to get this working...
Thanks for all your support... please Close
Thalys
well, voice command automaticcaly pauses the music playback, if you push the VC-Button (Camera-Button at the moment), to listen what you have to say trough the microphone of the HEADSET! So we really need "only" a possibillity to use the Headset-Button instead of for example the camera button. Everything else works quite good. :roll:
Microsoft Voice Command over BT : It works for me
BennTech said:
F
I tried this on my Cingular 8125 with Motorola H500. Have to press the button twice (a problem also documented in the responses), and recognition is reduced, but it works! Voice Command audio is also piped to my headset.
--BennTech
Click to expand...
Click to collapse
I m using Wizard and samsung SBH100 stereo BT and it works fine for me.
I searched for a half-hour on this site and another but couldn't find an answer. Could someone please help?
I'm using MS Voice Command, PhotoContacts Pro and Cardo Scala 500. When the very 1st incoming call comes in after my phone turns on I hear the ringtone via the headset for a few seconds. Then, as soon as Voice Command sounds the alert tone (4 or 5 short tones) the ringtone goes to my phone. All incoming calls after that ring via the phone only while VC sounds the alert.
Question: is there a way to have the ringtone comes through the headset?
BTW, my Scala 500 works perfectly with VC on my MDA otherwise.
Thanks
please help
I tried different settings in VC and PC Pro but nothing is working. Is anyone out there able to have the ringtone go to headset?
Thanks in advance
working
Figured it out. Thanks
Re: working
j007w said:
Figured it out. Thanks
Click to expand...
Click to collapse
Going to tell in case anyone else has the same issue? ;-)
Regards
Dox
working
I found out the Twilight Zone sound when the phone rings is from the Scala 500 itself--pretty neat. Anyway, I realized that I can click once on the bluetooth headset to initiate VC. Afterwards, I simply do NOT click again to close the audio gateway to allow all sounds from the phone (ringtones, announcements, etc.) to come thru the headset.
If I do this, however, I'll need to click the headset twice (first to close the audio gateway) to initiate VC--not a big deal to me. Hope that helps.
how did you fix it??????
lhoria said:
how did you fix it??????
Click to expand...
Click to collapse
used Bluetooth Ringtone Fix to Fix for playing ringtones over bluetooth headset
Do I have just to copy the softwer and install it or there any rools to be fallowed?
I can't find the serial there.
Thank you
It doesn't work with android!!!!!
lhoria said:
It doesn't work with android!!!!!
Click to expand...
Click to collapse
if for android use Bluetooth Fix Repair, and you can get it on http://www.androidpit.com/en/android/market/apps/app/com.phk.bluetoothfixrepair/Bluetooth-Fix-Repair
Thanks again, I red on the forum how to root the phone but I guess is very coplicated, and I am affraid of doing something bad! Any easier way???
I know this has been covered a bit but I have a quick question. MS is saying you need to have AKU 3.2 to get VC to announce caller's over your BT Headset. Has anyone found a simple way to make this work on an earlier ROM. Lately I've been running mostly Molski's ROM, but I dabbled in Faria's 3.2. I swore I had BT working totally with a 2.26 ROM, but am I on crack?
I liked Faria's 3.2 but I was missing too many calls. Is there any way to upgrade just teh BT in an older ROM to make this work. (I'm sure my inexperience shows in this question. If its impossible to do, just say the word and I'll patiently wait for a new 3.2 or 3.5 ROM or just forget about this)
I have two answers to your question.
The first is use the A2DP hack found in this forum and get a stereo bluetooth headset. The iTech Clip R35 or S35 both come with the two headphones; one with only one earbud, so you aren't covering both your ears. When you have a stereo bluetooth headset, all sound, including the calls from MS Voice Command are redirected to your headset.
The second is use the program found here:
http://www.pdaphonehome.com/forums/...luetooth-headset.html?perpage=20&pagenumber=1
It basically redirects all sound to bluetooth (probably a cheaper and easier fix); I haven't tried it yet, but it seems like it might be the solution you are looking for.
I also liked having the feature of calls announced through bluetooth, but it never did seem to work. I have been meaning to download the program from the site, but just haven't gotten chance. If you try it, let me know if it works.
Thanks.
I wonder how hard it would be to get that little program to run automatically when connected to a head set
yeah theres nothign cooler than wearing a stereo headset while driving. Thanks but no thanks.
I've used BT audio with v1.5, and it wasnt for me. i still use it to listen to podcasts via my headset on occasion though.
The nice thing about 1.6 when it was working (mist have been with Faria's ROM) was that I didn't hear my normal phone ringtone through the headset. It rang like normal through my headset, but it would announce the callers name. Its a cool feature.
edit: I must have been wrong. It does divert the ringtone through your headset as well. This gives me hope that I can work somethign out using BTAudio.
Yeah it is a cool feature. You can go to the notification settings in voice command (Settings -> Personal -> Voice Command) and change it so that notifications are done when bluetooth is available (the second radio button). If the notifications cannot sound through your headset, they will come from the phone speaker so you will still be able to hear who is calling without looking at your phone. Doesn't really help if your phone is in your pocket or if you can't hear it, but I guess its the next best alternative.
I have a cooked T-mobile 2.26 ROM and use MS VC 1.6 over my BT205 no problems. I was previously using the original O2 rom and has it working on that too so both an AKU2.0 and an AKU2.3 work fine. To install try this:
remove VC if installed
remove headset pairing
soft reset
create headset pair and leave it switched on
install vc1.6
soft reset
add path string to HKLM\SOFTWARE\OEM\VoiceCommand\
i.e. \Program Files\Voice Command\VoiceCMD.exe
soft reset
then try the button on the headset a few times
Riptos
I'm not having trouble using BT with VC. I want the Incoming call announcements to come over BT.
I installed Farias 3.2 and it worked, but I decided its not a huge deal. I'll try playing around looking at some of teh links here and see if I can't work somethign out. Thanks everyone.
I would also love for voice command 1.6 to announce incoming calls to my bluetooth headset. Interestingly, low battery announcements come through the bluetooth headset, but not incoming calls. Hmmm. Any suggestions/luck getting this to work?
Best,
MJB
VC Caller ID over Bluetooth
I think you all will enjoy this hack
where did u find this hack from? is it reliable?
jacob-mda said:
where did u find this hack from? is it reliable?
Click to expand...
Click to collapse
What? You don't trust someone who's first post is somethign to put on your phone
hell no considering this a brand new mda tmobile just sent me lol..
jacob-mda said:
hell no considering this a brand new mda tmobile just sent me lol..
Click to expand...
Click to collapse
Just wanted to let everyone know I tried it out today and it works as expected. Phone audio gets redirected to BT headset on incoming calls.
but does the ringer get re-directed also? cuz if so thats DAMN ANNOYING!
Well I dont mean to sound condescending to a "senior member" cuz im just a junior but did it cross your mind to select "none" as your ringer? Oh, Btw everyone, your welcome for my fantastic little file
What exactly does the file do???
I had troubles with VC 1.6 at first, but now it seems to work OK. Maybe I accidentally followed Riptos's instructions. Don't know.
Also BTAudio is working to redirect audio when I want that to happen, since VC now closes the audio after it finishes.
The only remaining minor glitch is that after giving a dial command, the little simulated dialing noise comes over the phone speaker not the headphone. So if the phone isn't right by, I don't always know whether it has dialed or not.
Any suggestions?
I tried the CallerID program. It works just as described. The only thing is that is takes up ~443.48 KB at startup. I just installed it so I don't know if it increases after a while.
I have a question. If I understand everything correctly, with a AKU 3.2 ROM this CallerID program isn't necessary if I want to get Incoming Call Announcements over Bluetooth. Right??
Has anyone gotten VC 1.6 to announce incoming calls over a STEREO Bluetooth headset? Seems like the discussions have only been for a hands free device. Anyone?
I don't have a 3.XX ROM and Voice Command notifications work on my stereo bluetooth headset without the program because I think wtih stereo bluetooth, all sound is redirected to the headset. I didn't do anything or change any settings, it just worked. I obviously have the A2DP hack installed, but that's it.