I searched for a half-hour on this site and another but couldn't find an answer. Could someone please help?
I'm using MS Voice Command, PhotoContacts Pro and Cardo Scala 500. When the very 1st incoming call comes in after my phone turns on I hear the ringtone via the headset for a few seconds. Then, as soon as Voice Command sounds the alert tone (4 or 5 short tones) the ringtone goes to my phone. All incoming calls after that ring via the phone only while VC sounds the alert.
Question: is there a way to have the ringtone comes through the headset?
BTW, my Scala 500 works perfectly with VC on my MDA otherwise.
Thanks
please help
I tried different settings in VC and PC Pro but nothing is working. Is anyone out there able to have the ringtone go to headset?
Thanks in advance
working
Figured it out. Thanks
Re: working
j007w said:
Figured it out. Thanks
Click to expand...
Click to collapse
Going to tell in case anyone else has the same issue? ;-)
Regards
Dox
working
I found out the Twilight Zone sound when the phone rings is from the Scala 500 itself--pretty neat. Anyway, I realized that I can click once on the bluetooth headset to initiate VC. Afterwards, I simply do NOT click again to close the audio gateway to allow all sounds from the phone (ringtones, announcements, etc.) to come thru the headset.
If I do this, however, I'll need to click the headset twice (first to close the audio gateway) to initiate VC--not a big deal to me. Hope that helps.
how did you fix it??????
lhoria said:
how did you fix it??????
Click to expand...
Click to collapse
used Bluetooth Ringtone Fix to Fix for playing ringtones over bluetooth headset
Do I have just to copy the softwer and install it or there any rools to be fallowed?
I can't find the serial there.
Thank you
It doesn't work with android!!!!!
lhoria said:
It doesn't work with android!!!!!
Click to expand...
Click to collapse
if for android use Bluetooth Fix Repair, and you can get it on http://www.androidpit.com/en/android/market/apps/app/com.phk.bluetoothfixrepair/Bluetooth-Fix-Repair
Thanks again, I red on the forum how to root the phone but I guess is very coplicated, and I am affraid of doing something bad! Any easier way???
Related
Hi,
I need to automatically pickup on calls. However this doesn't work if a bluetooth headset is attached: I have to use the headset button.
Moreover, if I answer tapping on screen, bt headset deactivates!
If I`m not wrong U have this option in Start/Settings/Phone...and then click on More there U have to check the box saying:
Answer incoming call withouth pressing
And then U have to chose how many times do U want your device to ring before answering...
Hope it will help!
Regards,
Primoz
P.s. If I`m not wrong...U have to chose a short ringtone for this...!
I have already done this, but the phone doesn't answer itself. I choose classic.wav ringtone....
Update
I found autoanswer is not working at all :-(
Anybody issued this problem?
unfortunately, I have the same problem.
The auto answer function was only ever designed for the standard wired headset. It won't work for bluetooth headsets or speakerphone.
JD
jdee246 said:
The auto answer function was only ever designed for the standard wired headset. It won't work for bluetooth headsets or speakerphone.
JD
Click to expand...
Click to collapse
In my oppinion the standard headset which is in the box with the JAM suxs!...is too quiet for me...I have tried it in my car and I have to take the phone from the car holeder and talk in normal way...I haven`t heard almost nothing from the headset...so I`m planning to buy a BT headset...but don`t know whichone to chose...
Regards,
Primoz
p.s. This was only my personal oppionion!
jdee246 said:
The auto answer function was only ever designed for the standard wired headset. It won't work for bluetooth headsets or speakerphone.
JD
Click to expand...
Click to collapse
may be is some additional software to fix the problem with autoanswering? It is very big problem for me! because I use BT headset when I'm skiing with helmet on my head.
/
Yeah, the same with me. I used to use my NOKIA 6230 + jabra250. Jabra suites nicely under my Arai hemlet and I can ride my motorcycle and answer phone calls.
Any ideas what should be done?
Igor
Hi,
I have been searching all over but, i can never find the A2DP Profile for
my BlueAngel Device. Would appreciate if someone can pass it to me.
Thanx
http://forum.xda-developers.com/viewtopic.php?t=15671&highlight=stereo+headset
http://forum.xda-developers.com/viewtopic.php?t=15644&highlight=stereo+headset
Will they work on Magician ?
is there a way for me to use it for music and phone ? i have tried around but, it will never work.
only way i know of is using the I-PHONE headset which use a dongle to play music and bluetooth directly to be a phone headset
Hi,
i have got the a2dp profile working well on my 2s. but, it breaks up quite often. Any ideas. ? I got the motorolla HT820. there is a previous and next track button. It does not work. Any ideas?
rick83 said:
i have got the a2dp profile working well on my 2s.
Click to expand...
Click to collapse
U mean to say that the you are able to listen to MP3 audio using BT in your BT headset??
yes... it works well...
Thanks a bunch for the info
rick83 said:
Hi,
i have got the a2dp profile working well on my 2s. but, it breaks up quite often. Any ideas. ? I got the motorolla HT820. there is a previous and next track button. It does not work. Any ideas?
Click to expand...
Click to collapse
hey guys,
any clues on how do i fix it ????
Mr Rick83
can u upload the a2dp profile patch file here to try it ?
and does it work with Magican ?
dont work on magician as it is using ms bt stack ..
Does this work on 1.40 with 3900?
rick83 said:
hey guys,
any clues on how do i fix it ????
Click to expand...
Click to collapse
I have the HT820 and got no problems like you, I do have the problem that outgoing calls automatically use ht820, but incoming calls the speaker on the phone. Music works fine.
pcrs said:
I have the HT820 and got no problems like you, I do have the problem that outgoing calls automatically use ht820, but incoming calls the speaker on the phone. Music works fine.
Click to expand...
Click to collapse
Hi pcrs,
Can you post the A2DP settings from your registry. Maybe, you have cracked the problem!
And, also AudioGateway settings too!
Thanks,
KOR!
I have the Motorola H500 BT Headset and I swear to Christ if I hear the f*&*ing Flight of the Valkyries song like it's being played by a 6 year old with a 1983 portable casio keyboard one more time I'm gonna start hurting things...
Can this be changed?
I wanna hear my .mp3 ringtone in my headset. OH GOD! ANOTHER CALL! ARRRGGGHH!!!!
Cyb
anyone...
can you set the BT to play the regular ringtone with a registry change???
Cyb
Its down to the headset what it does when a call is recieved.
So unless you can change it on the headset, your abit stuck!
I wanna hear my .mp3 ringtone in my headset.
anybody can help me with this issue? please do the needful as required soultion for this big problem,i am using BA wm5 with AKU rom the bluetooth motorloa h700 just gives beep when incoming call come /but in outgoing call while conneting its rings perfectly.
Why such a advance device doesnt have bluetooth incoming ring facility like other nokia phones /we get this any kind of ringtone sound like .wav,.mid,.mp3 setas ringtone in phone. i am sure there must be some trick or some registery editing has complete this issue ?
If am right this problem i hope every user facing with Ba devices .as the provided earphone works great soultion but unfrotunatly tht is now wireless..
Hope to get some soultion for the same soon....
good luck
******WE SHOULD BE WORKING*******
www.jetwaremobile.com is your answer
i have the same question
cyberslinger said:
I have the Motorola H500 BT Headset and I swear to Christ if I hear the f*&*ing Flight of the Valkyries song like it's being played by a 6 year old with a 1983 portable casio keyboard one more time I'm gonna start hurting things...
Can this be changed?
I wanna hear my .mp3 ringtone in my headset. OH GOD! ANOTHER CALL! ARRRGGGHH!!!!
Cyb
Click to expand...
Click to collapse
please seriously this is driving me crazy!!!
please if someone has told you, let me know
Ever since i have upgraded to Helmi's Rom and press the headset button i get the beep in my ear as normal, at this point i used to say "call and a name and work Etc.." and the call would be placed. But now since the ROM Upgrade i press the button i hear the beep in my ear then the sound dissapears from my ear and the phone beep to prompt me to say something, please can anyone advise me on what to do.
I used to be able to say "Play music" and i would hear the response in my headset and then the music would play through the headset, but it doesn't now it play through the phone speaker.
I am using MS VC 1.6
Also i would like the ringtone to sound on the Blutooth headset (Motorola H605) instead of the normal headset tone i know the headset supports the handsfree profile and it is set to Hands Free in the bluetooth settings, in fact this is the only choice i get.
Any help would be appreciated.
Richard
ricmoo2004 said:
Ever since i have upgraded to Helmi's Rom and press the headset button i get the beep in my ear as normal, at this point i used to say "call and a name and work Etc.." and the call would be placed. But now since the ROM Upgrade i press the button i hear the beep in my ear then the sound dissapears from my ear and the phone beep to prompt me to say something, please can anyone advise me on what to do.
I used to be able to say "Play music" and i would hear the response in my headset and then the music would play through the headset, but it doesn't now it play through the phone speaker.
I am using MS VC 1.6
Also i would like the ringtone to sound on the Blutooth headset (Motorola H605) instead of the normal headset tone i know the headset supports the handsfree profile and it is set to Hands Free in the bluetooth settings, in fact this is the only choice i get.
Any help would be appreciated.
Richard
Click to expand...
Click to collapse
Not sure I can be much help except to reassure you that I also have the same set up and it works fine (Helmi's AKU3.5 + MSVC1.6 UK). Have you checked the setting to use (settings>Voice command> 2nd 0option)?
Mav
mavrik64 said:
(settings>Voice command> 2nd 0option)?
Mav
Click to expand...
Click to collapse
I am not sure what you mean here what is the 2nd option, and can you confirm you have the same headset and does the ringtone play through it?
Thanks for your help
ricmoo2004 said:
I am not sure what you mean here what is the 2nd option, and can you confirm you have the same headset and does the ringtone play through it?
Thanks for your help
Click to expand...
Click to collapse
Sorry mate, I was in a rush earlier.
Settings>Voice command>notifications then select the option:
"Speak notifications if bluetooth hands free is available"
You could use the first option:
"Speak notifications using bluetooth hands free only."
Sadly my hands free is a Motorola H300 only, and yes, it plays the ringtone in my ear and tells me who is calling if they are in my contacts list )
Regards
Mav
Searched the Blackstone forums but did not find any post/thread regarding this particular problem .....
I'm a new Blackstone owner (and a newbie on this forum). Love the device but one major issue I have is that ringtones dont come through via the BT headset. I have assigned different ringtones to people and based on the tone of an incoming call, I should be able to screen calls without looking at the phone ..... or so I thought.
My phone : Blackstone (ROM 1.14.405.X). Dec/7 hotfix from HTC installed (since ROM is older than 1.19)
My BT : Jabra BT3030 stereo headset (AVRCP works fine)
Can anyone please help ?
Thanks !!
Try assigning a long ringtone as there is a lag and this may be cutting off the ringtone
Thanks winwiz. Tried that without luck. I only get the default beep-beep in the BT headset warning me of the incoming call ......
Bump !!
Can anyone of you folks help me with this ?
I tried a few tricks - set a looooong ringtone (2 minute song) ...... selected a single ringtone for all contacts ...... but no luck, still get only beep-beep via the BT stereo headset for incoming calls, while the phone itself plays the correct ringtone.
Funny thing though - music comes through fine on the BT (A2DP works fine) and I'm also able to control music without issues (AVRCP also works fine).
Any help/suggestions are welcome !!
Cheers !!
SLVRstone said:
Bump !!
Can anyone of you folks help me with this ?
I tried a few tricks - set a looooong ringtone (2 minute song) ...... selected a single ringtone for all contacts ...... but no luck, still get only beep-beep via the BT stereo headset for incoming calls, while the phone itself plays the correct ringtone.
Funny thing though - music comes through fine on the BT (A2DP works fine) and I'm also able to control music without issues (AVRCP also works fine).
Any help/suggestions are welcome !!
Cheers !!
Click to expand...
Click to collapse
I'm a little out of touch with the very latest gear - BUT - would the headset output the ringtone?? Surely it just has it's own ringtone that is the only one it can play, whenever a call comes in?
It seems to me that to send the .mp3 file over bluetooth to a device that doesn't seem big enough to have a full codec supply would tax the Bluetooth bandwidth somewhat!
SLVRstone said:
(A2DP works fine)
Click to expand...
Click to collapse
A2DP is used for stereo music, not for talking. Maybe its just not possible (with your headset). But I'm quite unexperienced with bluetooth headsets .
Riceburner said:
I'm a little out of touch with the very latest gear - BUT - would the headset output the ringtone?? Surely it just has it's own ringtone that is the only one it can play, whenever a call comes in?
It seems to me that to send the .mp3 file over bluetooth to a device that doesn't seem big enough to have a full codec supply would tax the Bluetooth bandwidth somewhat!
Click to expand...
Click to collapse
johnpatcher said:
A2DP is used for stereo music, not for talking. Maybe its just not possible (with your headset). But I'm quite unexperienced with bluetooth headsets .
Click to expand...
Click to collapse
Hello Riceburner .... today's Bluetooth headsets do indeed play your phone ringtone. But it should have A2DP feature that allows music to stream in and your phone should also have A2DP to "send" the music to your headset.
The .mp3 file does not get sent to the bluetooth .... the mp3 plays on your phone as a ringtone when you get a call and the A2DP feature then streams it to your BT headset where you then hear the ringtone.
This can have a lag of even a few seconds, hence the suggestion from winwiz a few posts back to use a long playing ringtone.
johnpatcher - A2DP is indeed not for talking, but it is necessary for the ringtone to play in your headset until you answer the call at which time the traditional bluetooth kicks in to handle voice.
Cheers !!
Can anyone help ?
Here is a consolidation of the issue and my attempts to overcome :
My phone : Blackstone (ROM 1.14.405.X). ROM date Oct/24/2008
Any hotfixes : Yes - since ROM is older than 1.19, applied the Dec/7/2008 hotfix from HTC that addresses screen freeze during multi clicks.
My Bluetooth headset : Jabra BT3030 stereo headset (A2DP and AVRCP works fine with the Touch HD phone)
Problem : Phone ringtone does not play through the BT headset. I get only a "beep-beep" on the BT headset for incoming calls, while the phone itself plays the correct ringtone.
Tried the following :
1) set a long ringtone (2 minute long song) as suggested by winwiz. No luck
2) Selected a single ringtone for all contacts. Still no luck
3) Paired the exact same BT headset with another phone (symbian OS) and it works perfectly - A2DP, AVRCP as well as phone ringtone comes through via the headset. Frustrated !!!
Any help/suggestions are welcome !!
Could this be a WinMo issue as opposed to a Blackstone bug ? Found the following thread ........
http://forum.xda-developers.com/showthread.php?t=310438
One way to find out ...... can folks spare a few minutes to post their experience in using A2DP heasets with the Blackstone - were you successfully able to hear ringtones via your headset ?
Cheers !!
*Bump*
Can folks oblige by posting their experience using A2DP headsets with the Blackstone ? Were you able to hear ringtones via your headset ?
Thanks !!
thread digger
sorry bringing this up again
but got EXACTLY the same problem here
tryied the suggestions too, without success
any tips?
[]s
I have a BT headset too that can A2DP. (SE DS-980) I don't think its meant for it to transfer ringtones as what one poster mentioned. Anyway, whenever my phone rings, I can hear the tone from my phone and a common single tone from the headset then the contact info is displayed in the LCD so I know who's calling. Another option is if you have MSVC, you can set it to alert you who is calling and only through the BT headset when it connected. That way you'd know who's calling you.
kieboy said:
I have a BT headset too that can A2DP. (SE DS-980) I don't think its meant for it to transfer ringtones as what one poster mentioned. Anyway, whenever my phone rings, I can hear the tone from my phone and a common single tone from the headset then the contact info is displayed in the LCD so I know who's calling. Another option is if you have MSVC, you can set it to alert you who is calling and only through the BT headset when it connected. That way you'd know who's calling you.
Click to expand...
Click to collapse
thanks kieboy
guess i'll install MSVC
I use my A2DP headset to listen to music on my embedded helmet speakers while in my bike. And of course, to answer calls too. So, looking to the phones screen isn´t a option and the custom ring tones would be VERY usefull
but, if there's no other work around...
[]s