Related
Hi guys...
have u seen this?
http://www.bluetake.com/products/BT420EX.htm
And now the question
Can u please have a look for me at the compatibility page... does that means anything for the XDAII?
Of course I mean as far as working as phone is concerned... of course the stereo audio would play.
Do any of u have or have tried the headphones? Do they work with the XDA in phone mode? Could they work?
If you don't know I would play guinea pig and order now!
Thanks,
Chris
from what the page says then it looks like will not be connecting to the xda2 using bluetooth but you just plugin the at minijack and the xda see it as a normal headset
and then the little box sendt the info to the headset
but of cause this would require you to use a minijack 3.5m to 2.5m converter
and you would not be able to use it for phone calls
Thank you... but why?
Dear Rudegar,
can I ask you why?
I do understand I would need the minijac converter and I would not be able to use the wired bottom for phone calls, but I tough I could still use the headset connected via BT for the phone call just as I did with my SE HBH-35 (before I lost it...).
Why you think I would not be able to use via BT? If I use BT tools?
Thanks!
Chris
it all comes down to how they made the device really
as i see it the headset connects to the box which connect to the minijack
maybe you can connect the headset directly to the bluetooth and not use the box
but the headset dont seem to have a mic
and the microsoft bluetooth stack dont support streaming audio over bluetooth from what i understand
as i see it then it dont matter if the headset is using bluetooth at all it could use any protocol to talk with the box
not sure about this but i do recall reading somewhere that the headset in the article does NOT work with the xda2. not sure if it's through this forum or another article. now if another chap could find that article somewhere...
a mate of mine living in hong kong tried using this headset with his xda and the bluetooth didn't work...unless of course he was doing something wrong so don't peg it on me
given that the bluetooth headset does not work with the xda2's bluetooth; the reason the converter may be needed is because the dongle might have a built-in 3.5mm jack. the xdas use 2.5mm jacks; thus needing the 3.5-2.5 mm converter. once you have the converter then basically you have the dongle piggy-backing on the xda...reminds me of the time i used a jabra bt with my xda1; the headset had an adaptor for non-bluetooth phones...downside was that you had the jabra dongle piggy-backing. the same could apply for the bluetake headset. you would need the dongle to be connected to the xda in order for the bluetooth to function.
i also recall reading that the bluetooth of the xda2 does not support wmp...
cheers
-r
Bluetooth Adaptor & headset
Have a look here http://shop.sbs-power.it/commerce.asp?sel=20&sel2=79&s=2&app=307
If you are looking for a Bluetooth headset for non Bluetooth device, this could be the solution!!!
Thank you, let me expain better!
Thanks to u all for all the replies to my question.
Let me be a little more spefic. There are 2 parts to how this headset works:
1) As a stereo headset connected via BT to the company's little box that connect to any 3.5 stereo jack (no matter what they are for... stereo, ipod, or XDAII bottom plug with an adapter).
For this use I have no dubt it would work since the 3.5 jack is same for everybody
2) As a headset (it supports both Headset and Hands-Free profiles) to pair with the XDA II as I would do with my SE HBH-35 for use as a phone only.
Would this bit work?
Thank you!
Chris
Rudegar:
"as i see it the headset connects to the box which connect to the minijack"
Correct for function 1
"maybe you can connect the headset directly to the bluetooth and not use the box"
My understanding is that u do this and through this connection u can use the headset only as a phone oyu need to ALSO connect to the box to also get stereo sound
"but the headset dont seem to have a mic"
It does
"and the microsoft bluetooth stack dont support streaming audio over bluetooth from what i understand"
It doesn't matter. I hope I would get audio streaming from the bottom 2.5 to 3.5 jack to little-box to BT to headset
AND
the phone function connecting the headset in (Headset or Hands-Free profile) to the XDAII. The only think I care about the stack is that it pairs with the headset in phoneheadset mode.
"as i see it then it dont matter if the headset is using bluetooth at all it could use any protocol to talk with the box"
Correct, but I still need the headset to be BT compatible with the XDAII to use function 2
Robson: thank you, I wrote the maker asking if there are any known issue with the XDAII
but lets say i'm riding a bike listening to music using the box
and the phone rings would the device automaticly drop the connection to the box and use the bluetooth bond to my xda2 to let me answer the phone ?
have anybody tried to connect a 2.5m headset the one that comes with the device and then bound a headset and see if the 2.5m headset interfear with the bluetooth when it rings ?
"but lets say i'm riding a bike listening to music using the box
and the phone rings would the device automaticly drop the connection to the box and use the bluetooth bond to my xda2 to let me answer the phone?"
I understand that by device you mean the headphones. I am not sure if it drops the connection or not, but u here the ring and when u answer it stops the music
I have attached the manual I found on the website
would be pretty cool to see a test of it with xda2 and maybe an ipaq so one could see if it would be even cooler if you were using the non ms bluetooth stack
I bought it!
I bought it!
I will let u all know if it works once arrives... I will have one week to test it or send it back.
I don't know if it would work much better with an Ipaq... as far as I know you can't get stereo audio out through BT from an Ipaq either...
i believe that the ipaq's bluetooth stack should support it but i'm not 100%
some guy in this forum did manage to get audio from his pc to his bluetooth headset but the quality was pretty poor
http://www.expansys.dk/product.asp?code=114076
the imate and xda2 and such are listed on the compatible list of this headset
but just how compatible we'll see when you or somebody else get hold of one and try it out
F**k what I said, it don't means s**t now...
Hi guys... got it yesterday... returning it today...
Qucik summary:
1) It worked fairly well as stereo headphone with the included box
2) It paired with the XDAII, but the audio was very ppr with a lot of eco and the botton to answer or close the call did not work with the original BT (1.52) nor with BT Tools.
Sorry guys....
wonder if it would have worked better with the WidCom stack
Did you try contacting their tech support at all? Usually companies with a new product like that are willing to work with users.
Yes I did
Yes, I did contact them:
Date: Mon, 16 Aug 2004 06:07:09 -0700 (PDT)
From: Christian
Subject: Compatibility with XDAII
To: [email protected]
Hi!
Can I use the i-PHONO BT420 EX Hi-Fi Sports Headphone Kit with an XDAII/iMate/QTek2020/OrangeM1000? (They are different names for the same pda/phone produced by HTC).
Are there any known issues?
Let me expain better myself:
1) I know and I am aware I cannot get stereo audio out of the PDA through BT from any application unless I connect the stereo jack to an adapter that get me to a 3.5 jack to connect to the BT transmitter box
2) What I would like to know is if I could pair and use the headphones with the BT of the the XDAII just for the phone part (as I would do with any other BT headset), so getting the mic and speaker to work
Thanks,
Chris
I go no answer... in the mean time I managed to buy, receive and send it back.
Hi cchris
Here you have one working Bluetooth stereo headset.
I have bought it for 1 1/2 month ago and works great with the Xda II
Here is the link.
http://www.sonorix.com/~tven/eng/product/product_bap.php
It work as a bluetooth headset with a 128M mp3 player.
If you listen to music and if you receve a call the the mp3 goes down and you can answer the call.
You receve a USB Dongel witch you can connect to the PC and listen to stereo music t ex.
Regards
Josef
Sounds Great but...
Thank you JoseF!
It sounds great!
I believe u mean the BT Headset on the link given (the BT Stereo Headset is reported as not yet available)
If I understand u correctly, by saying it works great with the XDAII you mean that it pairs. Can I ask a few questions:
-does it has a botton to push to answer/close phone calls, and does it works with the XDAII?
-is there a way to also get the stereo sound from the XDA? I don't care if I need to use dongles or third part audio to BT things... but can I do it?
I just bought a 1GB SD card, I don't want to carry a separate device for MP3, I would like to do everything from the XDA, also get the audio from the movies I play with the thing!
Thank you!
Chris
P.S.: By the way where did u bought it/where do u think I can get the best price for it?
Hi Chris,
does it has a botton to push to answer/close phone calls, and does it works with the XDAII?
Yes it has a botton to push to answer.
-is there a way to also get the stereo sound from the XDA? I don't care if I need to use dongles or third part audio to BT things... but can I do it?
No,not at the moment, It will be possibel in the future.If sameone can make the widcomm stack to work (h6315).
I dont know if the device is available at the moment.I have a friend that bought one in Januari,It was just 64M storage.
I bought mine in Juli , They have change the storage to 128M.
If you are intrested contact khcoi . Take a look at FAQ at http://www.sonorix.com/~tven/bbs/rboard.php?id=e_qa
Regards
JoseF
Hi all,
Just a quick (and probably stupid) question. I have the O2 mini and find the loudspeaker rather poor. When using the GPS it is often hard to hear the instructions. Is it possible to send the audio to a bluetooth headset, or even a bluetooth car kit.
I am new to all this so any help would be greatly appreciated.
Adam
Adam,
if you are connecting the GPS via BT, it is not possible in the first place to connect a second device in parallel. Unfortunately you can have just one BT connection at a time.
Even with a cable connected GPS it won't work, because it is not possible to use the BT handset as a audio device.
So, no, what you are trying to do is most probable not possible. I am doing it like that, that I use a BT GPS receiver and a cable headset if I do not understand the voices correctly. This way, you get the instructions and you can even make a call without using the loudspeaker.
rgds
Marco
Thanks for the advice marco. Much appreciated. Will just have to stick with the cable headset.
Bluetooth and GPS and Headset can work
Have to disagree with Marco99. I use a Navman 4420 Bluetooth GPS unit and an O2 Bluetooth headset with my I-mate PDA2K (1.40 ROM 1.12 Radio). I use Destinator Software (The Navman SmartST is better at finding the optimum route, but it is buggy and always seems to need upgrading to use the latest ROM).
Anyway, I frequently have both devices paired.
Last weekend coming back from SA to Vic I had the Destinator humming along, and a phone call comes in. The phone screen pops up and I answer the phone using the headset button. I minimise the phone screen, and the Destinator screen re-emerges, still tracking nicely along the Glenelg Highway. You lose the Destinator voice prompts during the phone call, but not the GPS signals, nor the visual prompts.
After hanging up, again using the headset button, the Destinator voice prompts start again and away you go.
I have the HQ audio patch and a HP BT Headset. I must try that sometime with the Destinator. However, I do agree that you can't listen to the navigation software through the headset and answer the phone, only one audio connection can be made via Bluetooth.
Now, if they can fix the "Line of Sight only" B/T headset bug...
Can do BT GPS + Headset at the same time
Just to confirm, I have had my Tomtom v5 Bluetooth GPS & my cheap-n-cheerful "Abe" Bluetooth headset working concurrently. Tomtom mutes when the phone receives/makes a call, but otherwise all is working together 100%, you can make & receive phone calls OK.
Can also confirm this works with non-Tomtom BT GPS (Globalsat model).
Joe
Re: Can do BT GPS + Headset at the same time
joe2316 said:
Just to confirm, I have had my Tomtom v5 Bluetooth GPS & my cheap-n-cheerful "Abe" Bluetooth headset working concurrently. Tomtom mutes when the phone receives/makes a call, but otherwise all is working together 100%, you can make & receive phone calls OK.
Click to expand...
Click to collapse
Just to ensure:
You didn't get the voice commands out of tomtom in your bluetooth headset, or?
Stefan
Tomtom5 & BT headset
No Stefan, Tomtom displays a "Mute" icon, so no sounds come from it. Only the voice call is transmitted to the headset
Joe
Re: Tomtom5 & BT headset
joe2316 said:
No Stefan, Tomtom displays a "Mute" icon, so no sounds come from it. Only the voice call is transmitted to the headset
Joe
Click to expand...
Click to collapse
I can confirm that 100% :roll:
Re: Bluetooth and GPS and Headset can work
Camstech said:
Have to disagree with Marco99.
Click to expand...
Click to collapse
I have to agree with camstech! I was not aware that this really is working, did not believe it and just tried it. And it works exactly as described. So, one new thing learned. As the protocol does not explain the behavior, it looks like the (otherwise crappy) bluetooth stack is quite inteligent here, and switches between different devices, so it looks both work in parallel. So, during my next roadtrip I can bring along my BT headset!
Anyway, unfortunately that does not solve your problem, Adam, as it is not possible to redirect the Navigation voice to your bluetooth headset, as long as the device (BT stack) does not support the appropriate BT profile.
regards
marco
EDIT: just checked the wikipedia entry http://en.wikipedia.org/wiki/Bluetooth. I must have dreamt about the single point connection with BT. Looks like a BT net (called piconet) can contain up to 8 devices, where one is working as master with up to 7 slaves. The details can be found in wikipedia. Maybe there is just connection per profile but I dont know for sure. Maybe there is a bluetooth expert here in the forum that could enlighten us. And possibly maybe, this is way to technical and all of you guys fall asleep during the first pragraph of my posting anyway ...
I have upgraded my ROM to the latest official one, but still I can't make my ITech's PowBOX bluetooth HeadSet to work as Wireless Stereo. It only works as Hands Free. I tried my HeadSet on Nokia and did works as headset flawlessly. I also cannot activate my voice speed dial via bluetooth on my Atom. The bluetooth button just activate redialling last called number. Is there anything I need to configure to make this work? Please help. Thank you.
Anyone, please?
I use the iTech S35 and STEREO works like a charm with the Atom. I get stereo mp3 and movies. The handsfree works too although the voice dial doesn't cos the long press to activate the voice dial uses the button to turn the iTech on and off so u will end up turning the iTech off.
not heard of the iTech powBOX so dun know how it compares but I assume it should work too.
i think it used to work in older ROM version... could it be the new ROM?
I use Samsung Bluetooth SBH100 as a stereo headset with Atom (latest ROM) - got no problems. Headset's remote control buttons for audio player works too. Short press of Phone button make a redial. 4 sec press should activate voice dail (on 'supported devices'), but make nothing (common problem).
can the SBH100 play radio?
touraco said:
can the SBH100 play radio?
Click to expand...
Click to collapse
Don't think so as Atom requires the ear piece to be plugin as antenna...
I am using Bluetake Iphono BT stereo headset on Atom. It can listen to the music and act as handsfree for calls seperately but couldn't do both at the same time, the headset will switch off whenever there is incoming call while playing music, i guess there's some problem on switching btw.
Anyone got the same problem??
can't listen to music but can make calls
Hi,
I'm kind of new here, as I just bought a used atom from that e*** auction site. it works great, except i can't get my bluetooth headset to work as a headphone while listening to podcast, mp3's, etc. using my BT headset to make calls works fine. I have both a Jabra BT130 and BT350 and both have this problem. is it the headset? if so, is there a list somewhere that lists what BT headset is compatible? i really need it to work as I cannot stand using wired headsets since by the time i untangle those wires, I'm out of time already...
thanks a lot!
It's the New Rom..(i think)
Knightro said:
I have upgraded my ROM to the latest official one, but still I can't make my ITech's PowBOX bluetooth HeadSet to work as Wireless Stereo. It only works as Hands Free. I tried my HeadSet on Nokia and did works as headset flawlessly. I also cannot activate my voice speed dial via bluetooth on my Atom. The bluetooth button just activate redialling last called number. Is there anything I need to configure to make this work? Please help. Thank you.
Click to expand...
Click to collapse
the problem comes with the new rom i think.. i had a bluetooth headset that worked perfectly before i uograded to the new Roms released by O2 itself.. i emailed them about the problem but they insist that nothing is wrong with the ROMs they made...
I just bought a headset for my Atom Exec and I can't work it all out, I want to listen to music from the memory card so I have set the bluetooth to Hands Free, Wireless Stereo and headset, all three are ticked. All is working fine but the only problem I have is when the phone rings you can only here it through the stereo headphones which makes sence but I can see this causing problems if I put the headphones down, I will miss calls as I want hear the phone ringing. Is there a way to make the phone ring also threw the speaker on the phone as well while using the headphones?
Unfortunately I don't think so. If you turn the Stereo Headset profile on all sound is routed to the headset. If someone knows how it would be great.
What you can do instead is set the phone to vibra + ring mode so that if you don't have the headset on, at least the phone will still shake.
hi Seal,
which bluetooth headset did you get? i'm asking because i just got the atom (not exec) and can't get the BT to work as a wireless headset - it only works when making calls.
also, you mentioned 'wireless stereo' checkbox, i don't see this option in the atom but it could be an exec feature.
thanks.
Hi, I bought the Plantronics, I use them every day and love them, it is such a great thing to not have wires hanging around.
http://www.plantronics.com/australia/aus/products/cat5180067/cat5620033/prod29780013
"I has an Atom", and I also have a mono, ordinary Bluetooth headset (Planex BT-03HS).
Seal: try turning off the Wireless Stereo profile, then getting this program called BlueMusic by Teksoft - it has an option you can uncheck that will allow the ringtone to come through its original source instead, while still routing music through your BT.
Yes, the program can do this even in unlimited trial mode - however, it only puts your music back on the BT band after a call in full-mode. I have no idea if this will work on stereo headphones like yours, but it's worth a shot.
Slamming_Sammy: With BlueMusic I can pipe stuff from TCPMP to bluetooth headset - which supports only handsfree - just fine, whilst still not missing a call. BlueMusic emulates the A2DP protocol so your phone doesn't have to. There's actually a free binary out there called BTAudio (which Bluemusic is based on), but its less stable than Bluemusic when it comes to disconnects and receiving calls.
Oh, and by the way, the Atom does support Wireless Stereo (A2DP). However, you can ONLY see it if your bluetooth headset has the profile as well (mine doesn't by the way). AFAIK only stereo headsets have this; even the newest BT2.0 mono headsets don't.
thanks a lot Ultimate. I was just about to try btaudio which by the way, works great, so I won't try bluemusic yet. so you're saying if my BT headphone is A2DP capable then I wouldn't need to run btaudio to route audio to my headset?
thanks.
Yes, that's what I'm saying.
Bluetooth stereo headsets are expensive, tho, AND the Atom is known to have dodgy A2DP support (except with BT2.0 devices), so you might want to hold out on the purchase.
Can enyone tell me if it is possible and how??
I have a Parrot 3100 and works fine for calls but can't put it saying nothing that comes from TOMTOM.
I have a friend that one time he heard the tomtom on a head-set.
But only one time and never more.
He doesn't know how!
Can enyone help me?
seem to recall people saying it works if
gps is connected first and then headset
You need a bluetooth headset with AD2P proflie. The standard hards free profile will only route calls to the headset. That said, if you press the voice dial button on your headset when an instruction is being read out, you will hear it in the headset (once only) - probably what the friend experienced.
Hi. I use a piece of software with my standard bt handsfree.
Chartcross Bluetooth Audio Router
The sound quality isn't stunning, but it lets all sounds that usually come from the inbuilt speaker to go through the handsfree instead
Tryed Chartcross Bluetooth Audio Router on my Trinity WM6 using hands free car kit (Delta System)... When activated it switches off the car speakers (like when calls arrive) but sounds still are on the speaker of pda...
Do you thing it will be necessary a reg tweak?
THX
No idea sorry. I only got my Trinity 2 days ago. I was using a prophet before which worked fine with it. I'll let you know if i do find anything though
IN MY HAND-FREE car kit my tomtom turned off the radio and instructions in car speakers.
right now that doesn't happen.
Infortunately i've tried so many roms i don't know i used at that time, and how make car speakers work again. Any help?