Hi All.
I wanted to know if there is any way to change the screen colours of my Jasjam. IE adding more blue and toning down the yellow.
I just received areplacement for mine which had a problem. However when i got my new one and fired it up it seemed that the sceen colours had to much yellow in them.
When i put it side by sided to the one i am about to send back you could clearly see the the colours of the old one where much more even and more vibriant.
Given that i don't think this minor problem with qualify the JASJAM for DOA i would really like to see if it can be adjusted.
Cheers.
Travis
Related
The screen on my Atom shakes in bright light. It's almost like there's two of the same lines and one of them is moving up and down maybe 1 mm or so. Has anybody else got that problem? It only happens in bright light, and it doesn't have anything to do with the veiewing angle, so it's not a trick of the light. The screen actually shakes! Oh, and it has done that on all the four (I think four) ROM's I have tried: The original it came with, the leaked ROM, the "Not for sale" ROM and the latest official ROM.
Er.. I have experience similiar problem too.. not with PDA screen, but with certain pattern (e.g. diagonal lines). As far as I know, it is my own eyes that is causing the problem. Before you go around finding answer for your PDA, try asking another person (the more the better), to look at your screen under the same condition, see if the person can see the same thing or not
If it is the screen problem, probably because it is a transflective screen? You are seeing the image of the reflective mirror at the back together with the actual LCD screen?
It would be a good idea, but my wife has seen it too, and this is my fourth or fifth PDA. They have all had the same or similar themes, and neither of the other units has had this problem. It's specially visible on the home screen, with the small writing for appointments and stuff. But this gave me an idea: I will try to change to one of the standard O2 themes and see if that changes anything!
Mastiff said:
It would be a good idea, but my wife has seen it too, and this is my fourth or fifth PDA. They have all had the same or similar themes, and neither of the other units has had this problem. It's specially visible on the home screen, with the small writing for appointments and stuff. But this gave me an idea: I will try to change to one of the standard O2 themes and see if that changes anything!
Click to expand...
Click to collapse
A have the same problem. Not often, but looks like you discribe, but it doesn't depend of light. Usially its several seconds long, and after that it becomes stable. I think its hardware problem. As I know some people have prodlem with pitch noise of the screen.
screen flicker and sound
Have the same occurence with the flickering screen(thought something was wrong with my eyes, as well as the high pitched sound coming from the screen everytime i turn the unit on. i don't really mind the screen but anyone got any solution to the sound? :shock:
Shaky Screen
Well I have this problem too with my Atom. I think it has to do with the transreflective screen--mainly a hardware problem with the direct sunlight messing with the screen. As far as I know it doesn't hurt it or damage the screen. It just makes it annoying to use the Today screen or the Wireless manager in direct sunlight. (I got this info by doing a search for the screen, try 'TFT' or 'screen problems.')
As far as I know there is nothing you can do about it.
Also with the high pitched noise--mine has finally gone away, or my hearing has just gotten worse and I've lost the ability to hear a sound at that high of a pitch.
I hope this helps!
I see... I hope mine goes away too :wink: I can leave with the flickering screen but the noise is just plain annoying :?
Just my expenrience.
I have read and tried the overclocking thing on my Charmer. And I've noticed that, if I were to underclock the unit approx 110MHz, the screen will flicker under the bright day light. I'm not sure if you can overclock your Atom (e.g. is it OMAP processor? Do a search before attempting anything, it may kill your unit). Maybe you can solve the problem overclocking it?
Well this could be really e serious problem:
using my X7500 I noticed the display light level decreasing a little bit. I supposed it could be a wrong impression of mine. So I tried to push the upper side of metal case and I noticed the light coming up. Then I made a little pression on the same edge (near HTC brand as well the lower opposite side) and the light decreased again.
I assume there must be a problem with led position under metal cover. It's eneogh a little pression to have problem with light display. Maybe it could depend on "shock" due to the keyboard hook-up that could damage led connector inside...
Please help and tell me if you have noticed same problem...
Please any suggestions for this problem?
asci said:
Please any suggestions for this problem?
Click to expand...
Click to collapse
Sorry asci - not come across this problem with my Ameo.
Hi...
try to make a little pression under jog dial button...around that area and notice if something happen with brightnes.
Thank you for your courtesy.
asci said:
Hi...
try to make a little pression under jog dial button...around that area and notice if something happen with brightnes.
Thank you for your courtesy.
Click to expand...
Click to collapse
Tried the suggestion you made but no problems here either asci. Maybe your unit is faulty. Try returning it due to electrical shortage or something similar. It certainly does not sound normal.
asci said:
Hi...
try to make a little pression under jog dial button...around that area and notice if something happen with brightnes.
Thank you for your courtesy.
Click to expand...
Click to collapse
Yeah, tried that - absolutely nothing happening.
I turned it back to assistence...it seems to be an isolated case, and they could tell me when I'll have it back.
HTC customer care: bad assistence:
1. they didn't solve my problem yet;
2. they didn't answer to my mail.
I purchased an HTC X7500 on 21.05.2007. After two days it immediately showed some problems related to LCD display. In fact on making a light pressure all around display metal case, especially near the hardware buttons on left side, the LCD background light became weak as it loosed brightness.
I brought it immediately to a technical customer care for reparation. After two weeks it returned back but the problem related to display brightness still persist.
1. The backlight is weak and display is not so bright and not stable too as the very first time I tested it. Now when I connect 4 in 1 cable or mini USB one, and some time even when a set stylus in its lodging, by doing some little movement of the cables connected or of the stylus in its lodging, the backlight display increases to its normal brightness level for while after that it turns itself weak so that display colors appear not vivid and with a lack of brightness. Before testing it I verified that all backlight levels were set on maximum level with any power option.
2. When I browse through menu icons and select them (without launching application) their appearance is not stable and it seem to flicker.
3. If I set a white background on display it seems to be completely crossed by horizontal stripes and its appearance (color and brightness) is poor.
So today I had to come back to HTC customer care point to leave it for the second time in twenty day.
I would like to point out that I am a professional user and I’m really disappointed about it. I had to bring my device to a technical assistance point twice and the first time, I had it back not repaired.
Considering that, and also considering its high price and that it came with original unmistakable manufacturing faults, I am asking to HTC for a replacement of the device with another X7500 perfectly working.
Best Regards.
asci said:
HTC customer care: bad assistence:
1. they didn't solve my problem yet;
2. they didn't answer to my mail.
I purchased an HTC X7500 on 21.05.2007. After two days it immediately showed some problems related to LCD display. In fact on making a light pressure all around display metal case, especially near the hardware buttons on left side, the LCD background light became weak as it loosed brightness.
I brought it immediately to a technical customer care for reparation. After two weeks it returned back but the problem related to display brightness still persist.
1. The backlight is weak and display is not so bright and not stable too as the very first time I tested it. Now when I connect 4 in 1 cable or mini USB one, and some time even when a set stylus in its lodging, by doing some little movement of the cables connected or of the stylus in its lodging, the backlight display increases to its normal brightness level for while after that it turns itself weak so that display colors appear not vivid and with a lack of brightness. Before testing it I verified that all backlight levels were set on maximum level with any power option.
2. When I browse through menu icons and select them (without launching application) their appearance is not stable and it seem to flicker.
3. If I set a white background on display it seems to be completely crossed by horizontal stripes and its appearance (color and brightness) is poor.
So today I had to come back to HTC customer care point to leave it for the second time in twenty day.
I would like to point out that I am a professional user and I’m really disappointed about it. I had to bring my device to a technical assistance point twice and the first time, I had it back not repaired.
Considering that, and also considering its high price and that it came with original unmistakable manufacturing faults, I am asking to HTC for a replacement of the device with another X7500 perfectly working.
Best Regards.
Click to expand...
Click to collapse
Good luck and let us know how it turns out. I hope HTC doesn't become so big that they stop listening and taking care of their customer. I would hate to look for another high end phone manufacturer.
Arrived today...replaced.
I got a secondhand T-Mobile MDA and while the screen works fine - the touchscreen works, there's no cracks or anything - everything is colored wrong...
It's like if you suddenly decreased the color depth on your desktop version of windows... everything goes to a washed out version of the proper color. In addition, there's kind of... lighter stripes that flicker across the screen when it's displaying colors.
Since I can't really explain it that well, I took a video of it. It's a little flash video like you find on YouTube... I also have a raw MPEG of it here for people that don't have Flash.
That's the default Windows Mobile theme in the video... the blue is washed out, and you can see the stripes flickering on the right as I move the slide up and down. While there's little "arc" of discoloration across the top some times, the stripes are usually the major discoloration on the screen.
There seems to be little problems when displaying things with a primarily white background except for washed out colors. The little water damage stripe under the SIM is still there and white.
Is this fixable? How much is it gonna cost me?
Anybody have any ideas? Would a new LCD fix this?
Maybe it's a flex?
Can't tell much from Your video
i also have this problem... it just happens when i slide my phone up...
I recently switched from a Wing (Herald) to the Hermes (8525)... I noticed the colors are pretty crappy compared to the wing, yet the Hermes is much better in just about every other aspect.
Is there a way to adjust the colors, contrast, etc. to try and make it look a bit better?
I think the same...
Is the any way to adjust the contrast/brightness and other things so the colors could be more vivid?
Comparing the screen with the one in Artemis it looks really bad
^^Agreed^^
the colors seem pretty dull and not vivid like the touch that I had previous to this device..taking a look at the specs, it seems like both touch and the tytn use the same TFT touch sensitive screen supporting over 65K colours. But why does the tytn screen seem "gloomy" does this have to do with the fact that it is Windows 5??.. any help is appreciated
I have WM6 on board and it is also very dull I even hacked the registry to show the "Contrast" option in Settings but nothing happens when I change it Any ideas?
So I guess its not the W5, well the only other thing I can think of, is the protective film that came with the phone?? any one using their device without the "stock" protector that was provided with the phone?
I have no protector on my screen
I think that the protection-glass makes the screen look so bad...
hmmm
I noticed something interesting, once I do a soft reset and the device is loading up, when my providers (rogers) logo appears the screen actually gets brighter and then it drops back to the less bright screen that we are complaining about does this only happen to my hermes.. this I guess that there is light at the end of tunnel.. Now its a matter of tweaking this to remain "max bright".. any suggestions??
HTC-sync said:
I noticed something interesting, once I do a soft reset and the device is loading up, when my providers (rogers) logo appears the screen actually gets brighter and then it drops back to the less bright screen that we are complaining about does this only happen to my hermes.. this I guess that there is light at the end of tunnel.. Now its a matter of tweaking this to remain "max bright".. any suggestions??
Click to expand...
Click to collapse
Do a search for "Superbright" cab...it's small & will do the trick!
thank you galaxys!! here is the direct link to the .cab file, I am currently at work so I cant try it out .. if some one beats me to it, please post and let me now what you think!
http://www.vijay555.com/?Releases:VJLumosII
nice!
just installed the .cab and .. its alot brighter.. thanks again vijay555
True... I have tested it several days ago.... It is brighter but the contrast is still low And everytime you want to open the camera, you have to disable it...
Hi all,
A months ago I bought a new, unopened I9506. When i switched on i realized it has a display failure. The bottom of the screen was pink on bright background (1st attached picture).
I took the phone to the service, they warranty replaced the whole front panel.
But unfortunately the new display isn't perfect either. The abnormal pink color ceased, but on the same area of the screen has different (brighter) color tone like above. I took it back to the service again. After a week they told me, that the instrumental measurement values are normal, and compared to other S4's there isn't any difference.
The fact is, the problem not so significant like before, but is see it, and it is annoying. I attached the current state (2nd picture), but my camera isn't good enough to show the problem properly.
I don't want to disassemby in the warranty period and the service won't solve my problem, so my question is there any software solution to balance the tone of screen partly?
And what could cause this failure? Interference of the antenna, or something push the back of the display?
I don't believe the replacement part is wrong too.
thanks
All screens are different...
Try to *#0*# then select "receiver"
Check the white tone..
I don't think it's defected..
I bought s4 3 tines. Every time tone is different. Amoled never same..
It's normal dude..
Sent from my GT-I9500 using xda app-developers app