Related
Hi Guys,
I have searched the forum, but no solution for my problem. I had a dutch htc 3300. My device is not unlocked. I have tried to flash the pdamobiz rom to my device and since can`t get by the splash screen. STUPID!!! I can get into the bootloader but I need the original dutch rom to flash. Can anybody upload please? Cannot do anything with it now.
If I am right, there is no way to unlock the device in this situation!?!
Any suggestions?
thanks
Exact same issue a couple of hours ago.. see my Help Desperate post below this one.. it worked for me.
how
What exactly did you do? I did not understand your thread. How did you unlock your device?
What is meant by this:
not your flashing one, but clean bootloader, by hardreset followed by record and reset
thanks
Wait
Hi Guys,
Is there not a solution? Do I have to wait for HTC to release a dutch rom upgrade? I still don`t understand why the Pdabiz rom killed my device?
Please help me out
thanks
hakanos said:
What exactly did you do? I did not understand your thread. How did you unlock your device?
What is meant by this:
not your flashing one, but clean bootloader, by hardreset followed by record and reset
thanks
Click to expand...
Click to collapse
That refers to the flashing Tmobile boot screen that shows and stays.. it wouldn't boot any further.
If you press record (left top side of your device, small button above the volume slider) and hold this while pressing reset you will get into the real bootloader mode (a tri-colour screen) that allows you to do a USB connect.
Now go to: http://wiki.xda-developers.com/index.php?pagename=Artemis_Upgrades
and download the following ROM for your T-Mobile device:
T-Mobile English T-MOB005 ARTE***** 1.13.110.1 9/22/06 1.13.110.101 1.13.0000 02.49.90 4.1.13.25 (direct link: ftp://xda:[email protected]/art_tmouk_11311001_024990_wwe_ship.exe)
Just run this exe while in that bootloader (tri-colour) mode.
Good luck, that did it for me.
Not T-mobile
Hi,
Thanks for your reply. But my device is not T-mobile branded. It is a original HTC.
Tried your method but does not work.
Will have to find someone with a dutch rom I think
I am out of ideas
*bump
I have the same problem.. I can get into bootloader screen, but I can't find a T-Mobile ROM to flash.
Anyone with a working link to a T-Mobile ROM? The link was removed from this page..
Thnx
Pyth said:
I have the same problem.. I can get into bootloader screen, but I can't find a T-Mobile ROM to flash.
Click to expand...
Click to collapse
What language was your original T-Mobile in? I presume Dutch since you live in Holland. Unless you had your phone unlocked before you tried to flash it, you can only restore the same ROM. Unfortunately there is no Dutch ROM as far as I know.
So how did you solve it? Thought you had this problem 2 months ago..
And yes the original language was Dutch..
Im contacting T-Mobile right now, and they should have a NL version but the site is down atm.
Pyth said:
So how did you solve it? Thought you had this problem 2 months ago.. And yes the original language was Dutch..
Im contacting T-Mobile right now, and they should have a NL version but the site is down atm.
Click to expand...
Click to collapse
Personally I never tried to flash my phone, maybe you read an answer from me to someone with a similar problem.
T-Mobile can provide you with the correct ROM, but I don't think it can be found at their site. Well, it was not there last time I looked anyway.
grun said:
Personally I never tried to flash my phone, maybe you read an answer from me to someone with a similar problem.
T-Mobile can provide you with the correct ROM, but I don't think it can be found at their site. Well, it was not there last time I looked anyway.
Click to expand...
Click to collapse
Hmm you were right.. it was somebody else.
The ROM should be avaible @ http://www.t-mobile.nl/software but that site isn't working at the moment. They told me that the only thing I could do now, is going to a T-Mobile shop and let them send it for a fix.
So my hopes are on a PM that I send to the author of this post. Perhaps he's able to give me the original ROM.
Pyth said:
So my hopes are on a PM that I send to the author of this post. Perhaps he's able to give me the original ROM.
Click to expand...
Click to collapse
Mmm, I think he was looking for a T-Mobile ROM in the English language, so you cannot use that because it has a different signature. Unless you're phone is unlocked?
nope..
But I can give it try anyway..
Want to use the fixing by T-Mobile as a last resort..
Pyth said:
Want to use the fixing by T-Mobile as a last resort..
Click to expand...
Click to collapse
I just checked their Dutch site and it is up and running again. Hate to disappoint you, but there is no original complete Dutch ROM for download, only an update with a Blackberry Client.
You may find a ROM for a MDA III though, be careful not to use that one because that is a different model, also known as Blue Angel. It has a sliding mechanism and a keyboard for example.
grun said:
I just checked their Dutch site and it is up and running again. Hate to disappoint you, but there is no original complete Dutch ROM for download, only an update with a Blackberry Client.
You may find a ROM for a MDA III though, be careful not to use that one because that is a different model, also known as Blue Angel. It has a sliding mechanism and a keyboard for example.
Click to expand...
Click to collapse
Weird.. I still get an error on this site: http://www.t-mobile.nl/software/
Pyth said:
Weird.. I still get an error on this site: http://www.t-mobile.nl/software/
Click to expand...
Click to collapse
https://www.t-mobile.nl/zakelijk/media/download/BA_TMNL_14200_119_11300_Ship.exe
MDA III Update...
I also have my P3300 f*cked up...
Thnx for the link!
But this doesn't work if your MDA is in bootloader.. this program needs an ActiveSync connection
Hmm...
I'm thinking about sending it to HTC voor repair
I'm going to do one more thing and that's is backup the OS
from a friend that also had a HTC P3300 NL and hope to make
a ROM file...
So let's hope that will work!
But if you made a backup you still need to connect to your MDA while it's in bootloader...
If anyone knows how to do that...
Yep i know... i've tried everything! with mtty.exe and nothing
works.
See below the reaction from IMEI-CHECK:
Hello,
sorry to tell you the BAD NEWS but you REALLY can not fix the phone yourself.
You only have 2 options to get the phone fixed:
1) you find the "ORIGINAL HTC P3300 DUTCH ROM Update" and flash the device from bootloader (most likely not available)
2) you send the phone to repair
Sorry to tell you but there are REALLY REALLY REALLY REALLY REALLY no other options.
The mistake from you was to use the risky ROM update without CID unlocking the phone BEFORE.
Regards,
IMEI-CHECK Team
----- Original Message -----
Hello,
I've a broken HTC P3300 (Dutch). The story is this:
It has no sim-lock but it does have a CID-Lock.
I update my Dutch HTC P3300 to this ROM:
- PDAMobiz_Dopod_P800W_AKU301_v1.1.2_PowerMap
and that whent great. Everything worked. After this i saw another ROM and i installed it:
- Tom HTC Artemis Rom v2.00.01 PDAVIET
and the update whent fine, but after hard reset it stops at the HTC Logo with the version numbers.
I only can get to the bootloader and do some thing with hyperterminal (mtty.exe).
When i want to install this ROM:
- HTC_1.12.405.01_026790_WWE_SHIP
it says that i get this error after 2%:
ERROR [244] WRONG MODEL ID
When i use art_tmouk_11311001_024990_wwe_ship.exe it says i have the WRONG VENDER ID.
I have made a backup with aWizard and have these files:
-HTCLogo.nba
-OS.nba
-Radio.nba
-Splash.nba
-boot.rgu
and a folder ExtRom that is empty...
Can you help me with this? I hope so!!
Thanks for your help!
Version numbers:
IPL 1.12.0001
SPL 1.12.0000
hi I've tested a new powermap.exe dopod rom but after reboot my O2 still freez on boot screen (I can see only O2 boot screen with radio and rom version), so I can't connect my Orbit in windows mode, only in IPL boot (via usb) but I've this error when lounch any rom:
INVALID MODEL ID ,with any original rom
INVALID UPDATE TOLL ,with any modified for imeicheck upgrade
yes, I've unlock my Orbit via imeicheck but now I must have the original Germa rom for repair it...please anyone konw the solution of my problem or have any original German O2 rom?
help me please!
Hi ...
If you had unlocked your Device with IEMI Check, and everything was fine, and you sure that your device is now CID unlocked, than try T-Mobile original ROM (should help) IF not? So ... Welcome Here
Cheers...
I supposte that the only way is find the original O2 GERMAN rom, anyone have it?
I'm stupid, stupid, stupid!!!!
do what j0kkk3r propose, find tmouk_shipped rom and try that one. it helped me
thefamous said:
INVALID MODEL ID ,with any original rom
INVALID UPDATE TOLL ,with any modified for imeicheck upgrade
yes, I've unlock my Orbit via imeicheck but now I must have the original Germa rom for repair it...
Click to expand...
Click to collapse
That's strange... I thought that you should be able to flash any ROM after unlocking, not just the original German one. Maybe something went wrong during unlocking? I suggest that you send an email to those guys from imei-check, maybe they can offer you a solution.
grun said:
That's strange... I thought that you should be able to flash any ROM after unlocking, not just the original German one. Maybe something went wrong during unlocking? I suggest that you send an email to those guys from imei-check, maybe they can offer you a solution.
Click to expand...
Click to collapse
I've just sent email to imei support, look:
Hello,
you only can get it back to life with an O2-XDA-German-ROM (which odes not exist right now).
The other option is to send the device to repair (service centre).
The unlocker can NOT work in case your device has a malfunction (it is described in DETAIL that the unlocker requires a working ActiveSync connection on the our web site where you purchase the unlock).
Regards,
IMEI-CHECK Team
----- Original Message -----
>
>Hi, I'm disperate (and stupid man).
>my orbit is stuck on boot screen exactly as manples'. i tried to flash
>pdamobiz custom ROM. i can enter bootloader.
>I've just buy your unlocked service but now I can't install any rom because my
>orbis still on boot O2 screen ()freez).
>So your application strart only in windows and via actyvesync mode, and I've
>no connection in actyvesync mode with my stuck orbit.
>only solution is to found the original rom, do you have the O2 GERMAN rom?
>please help me!!!!
>I've bought the Orbit in germany (O2 operator, and in origin there was a
>GERMAN ROM).
>best regard and excuse me for my bad english.
phsnake said:
do what j0kkk3r propose, find tmouk_shipped rom and try that one. it helped me
Click to expand...
Click to collapse
do you know where is the TM shipped rom? I have O2 Orbit and originary was GERMAN rom...
someone in this forum posted his own web page, i guess its there.
link: www.our-xda.co.uk
YUPPYYYYYYYYYYYYYYYYYYYYYYYYY My ORBIT O2 was re-born
the solution is in this magic ROM (I've O2 but this is the compatible rom Tmobile, i suppose...)
art_tmouk_11311001_024990_wwe_ship.rar
thanks to all.
I Had The Sam Problem
HOW DID YOU DO IT MANNN??? I have tried to do this with a tmouk ROM but I always have the same error. WHAT IS THE CATCH????
It is posible only if your Device is CID unlocked ... If not ... only service or imei-check...
Cheers ..
to jokkk3r:exactly, lot of people flash first, then read. ooops I dont have supecid unlocked-whats now, please help im desperate....
& i dont understand why anyone is trying ROM thats well known for flashing probs-pdamobiz- it could be interesting to find out how many of us had troubles after flashing
2 phsnake:Yes, but how many ppl have it installed and workin WELL? Witch ROM you thing is the best for O2 At the moment?
psrejic said:
HOW DID YOU DO IT MANNN??? I have tried to do this with a tmouk ROM but I always have the same error. WHAT IS THE CATCH????
Click to expand...
Click to collapse
I apologize for you. My orbit was originary German and locked, so I'm unlocked it with imeicheck utility, so I was installed a HTC wwe ship rom. And yesterday I has a problem with powermap rom. Now I've solved with TMobile rom, I don't know if working because my Orbit was CID unlocked (I belive no, because if now i try to install htc wwe ship rom I've wrond ID error message..) Do you have try to install via bootloader mode? enter in bootloader, so double click on tmobile rom.
bye
2 jokkk3r im using dopod shipped, im quite happy. its +-new dev. it'll take some time till here will be some roms or at least tools for cooking them.but most im waiting for is extrom unlocker like is for universal,thar U can use it like a storage
I tried to load the german wm6 os.nba another poster provided (using the aWizard tools, which I had previously sucessfully used to load the WWE HTC rom on my Chinese Dopod 858), and currently the device just sits at the logo screen.
I can enter the bootloader, and I can even use the 'official rom updaters' while in the bootloader, unfortunately they all fail at 2% saying 'invalid device id'.
Any advice on how to get my phone running again?
I think if I could find a chinese dopod 858 updater, I could use that to load a proper OS onto the rom, but I can't find one anywhere.
Another option would be to 'more completely' unlock the cid, then I could use the HTC updater... but all the cid unlockers seem to require a working active-sync connection, which I certainly cannot provide from the bootloader screen.
Again, reaching out to the more experienced here to help on this.
thanks
Did you check on www.dopodasia.com for your phone's original ROM updater? Dopod always has the latest ones they've released for each model on their site...
From the other Herald thread (http://forum.xda-developers.com/showthread.php?t=290382), I read that the extracted WM6 German OS.nba was corrupted due to some error in the extraction process. Papamopps has promised to post the OS.nba again, hopefully soon so you could maybe try to flash that version too.
P.S Aiyo? What language is that?
I tried, I'm not able to get an account to their site. When I enter my serial number, I always get an error.
(http://www.dopodasia.com/Dopod_en/member/check.aspx)
Oh, and 'aiyo' is mandarin chinese pinyin for doh, embarrasment, frustration... that sort of thing
Sorry can you tell me where to Download original HTC Updates ?
My Update did not work out, too and i am stuck in Bootloader by now....
i think i can flash the WWE, will try this now !
Here the lastest ship ROM, but I'm not sure you can UP without unlock CID:
http://superiorgadgets.com/software/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
mkford said:
Here the lastest ship ROM, but I'm not sure you can UP without unlock CID:
http://superiorgadgets.com/software/RUU_Herald_HTC_WWE_5.4.405.1_4.1.13.34_02.79.90_Ship.exe
Click to expand...
Click to collapse
It wm5 aku3.2. Where to take wm6 wwe?
SOrry - there is no WM6 WWE.
I made a backup with awizard to dump the german ROM of XDA terra (aka herald) - But it was only read from 0 to 58000 - I figured it out - that the os.nba is not completly.
So I deleted the links I provided.
SORRY.
Hope it will work again.
Thanks for the replies, but I think the only updates that will pass the cid lock would be an official update for that phone... specifically, a Dopod C858 sold in mainland China... (ugh). I still haven't found an appropriate updater.
This is a patched SPL for HTC Artemis devices (HTC P3300 / T-Mobile MDA compact III / O2 XDA Orbit / Dopod P800W / Dopod P800 / Dopod M700 / Orange SPV M650).
This SPL is based on original Artemis 1.11 SPL but includes 3 patches:
SuperCID / SecLevel=0 (set 32)
Does not check Model ID
Does not check signature*
(*) code must be formally signed i.e. contain properly-formated signatures on their places, however no checking are performed against them.
This means you can flash ANY ROM to your Artemis after flashing USPL on it, no need to pay for CID unlock anymore!
Disclaimer:
This is free to use but at your own risk, I take no responsibility for any conflict, fault, or damage caused to your phone by this unlocking procedure. No warranties of any kind are given. Any commercial usage prohibited.
Instructions:
1. Unzip
2. Connect your phone to computer, make sure activesync is enabled (green icon)
3. Run start_uspl.exe on your computer and wait until process finishes
4. See Artemis_USPL_Manual.zip (PDF) for more detailed instructions!
Thanks to:
arc, fdp24, itsme, machinagod, Des, Olipro, and all others who I forget!
everyone else in xda-developers.com
Thanks again pof, you make all Artemis users very happy! you are the best!
Has anyone tried this method yet. Don't really want to be the first one with a "BRICK" if it all goes wrong...........but oh what a stylish brick it would be!
Shand359 said:
Has anyone tried this method yet. Don't really want to be the first one with a "BRICK" if it all goes wrong...........but oh what a stylish brick it would be!
Click to expand...
Click to collapse
honestly mate... if its released by pof then he has tested it... as he is a moderator and his cred is one of the highest here... jesus... just try it...
Thank you for those kind words. I do not doubt pof's credibility. I also do not doubt that he has tested this program. I am just the unlucky person who would try this and get the thing all wrong and end up with a brick. I am quite good this way.
Please, it would appear my last message was doubting pof's abilities. That is definately not the case.
POF, I apologize to you, please though understand where I am coming from. Thank you.
Shand359 said:
Thank you for those kind words. I do not doubt pof's credibility. I also do not doubt that he has tested this program. I am just the unlucky person who would try this and get the thing all wrong and end up with a brick. I am quite good this way.
Please, it would appear my last message was doubting pof's abilities. That is definately not the case.
POF, I apologize to you, please though understand where I am coming from. Thank you.
Click to expand...
Click to collapse
i do understand where you come from... but as you can see 4 other people have downloaded the program and tested it... if there was an issue im sure they would have voiced it...
Possible any changes in start_uspl.exe?
As first many thanks for your help and for the many time that you invest in the development some tools.
Now my question:
It is possible that you make a update for your developed tool "start_uspl" so that the updater function even if the phone are connected in bootloader modus?
I think that is the solution for some bricked phones after updates with locked CID.
Greets from Liechtenstein, planeta
pof said:
This is a patched SPL for HTC Artemis devices (HTC P3300 / T-Mobile MDA compact III / O2 XDA Orbit / Dopod P800W / Dopod P800 / Dopod M700 / Orange SPV M650).
This SPL is based on original Artemis 1.11 SPL but includes 3 patches:
SuperCID / SecLevel=0 (set 32)
Does not check Model ID
Does not check signature*
(*) code must be formally signed i.e. contain properly-formated signatures on their places, however no checking are performed against them.
This means you can flash ANY ROM to your Artemis after flashing USPL on it, no need to pay for CID unlock anymore!
Disclaimer:
This is free to use but at your own risk, I take no responsibility for any conflict, fault, or damage caused to your phone by this unlocking procedure. No warranties of any kind are given. Any commercial usage prohibited.
Instructions:
1. Unzip
2. Connect your phone to computer, make sure activesync is enabled (green icon)
3. Run start_uspl.exe on your computer and wait until process finishes
4. See Artemis_USPL_Manual.zip (PDF) for more detailed instructions!
Thanks to:
arc, fdp24, itsme, machinagod, Des, Olipro, and all others who I forget!
everyone else in xda-developers.com
Click to expand...
Click to collapse
Ooops They did it again!
planeta said:
It is possible that you make a update for your developed tool "start_uspl" so that the updater function even if the phone are connected in bootloader modus?
I think that is the solution for some bricked phones after updates with locked CID.
Click to expand...
Click to collapse
Sorry but not possible, it first transfers patched SPL through activesync and places it on phone memory, and needs WinCE for that. If you already have a brick that tool will not help you.
THANKS
Thanks Dear i was very anxiously waiting for it
Please Please please device an idea for athena tooo
Great work pof, BIG CONGRATS !!!!
Now I need to came back my artemis, and I will try it !!!
Thanks again !
this is cool pof...!
Thanks again...
Really works. Thank you.
SPL 1.13
Is it independent on original SPL? My is 1.13
Big thanks to big brain Mr.Pof by means of your genuis ideas i was able to
unbrick my htc tytn and now i am needing your help to unbrick my ARTEMIS THANKS IN ADVANCE;
josef.bilek said:
Is it independent on original SPL?
Click to expand...
Click to collapse
Yes, does not depend on anything. Will work as long as you can set up a guest partnership on activesync with your device.
THank you.
It works great. I just flashed a HTC rom to my O2 Orbit with no problems.
how to name the file with rom ?
USPL vs. other methods.
USPL vs. other methods.
One of the key benefit of USPL compared to other methods, is that USPL enables you to flash any ROM version, regardless of your device model ID.
To minimise a risk it is recommended to have USPL installed before flashing device with modified WM6 ROM or any other constructed ROMs.
In case of failure, you will be able to re-flash your device with any desired ROM version for ARTEMIS.
regards,
fdp24 said:
USPL vs. other methods.
One of the key benefit of USPL compared to other methods, is that USPL enables you to flash any ROM version, regardless of your device model ID.
To minimise a risk it is recommended to have USPL installed before flashing device with modified WM6 ROM or any other constructed ROMs.
In case of failure, you will be able to re-flash your device with any desired ROM version for ARTEMIS.
regards,
Click to expand...
Click to collapse
Could this be used with the new HTC touch version? will it be to risky to do so?
Thank s in advance.
hi all, Gratz for great forum.
I received from friend of mine a brick called HTC - on back is label ARTE100.
it is freeze on bootscreen, that is good for now.
BUT i have information that it is comming from Netherlands, and was locked before.
Someone else is bricked upgrading it without CID unlock beforehand.
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
And is there any available factory ROM from this carrier.
There is no sign or any label on it.
freezing screen is:
IPL 3.04.0001
SPL 3.04.0001
GSM 02.93.90
OS 3.4.0.0
Thank You Very much for any answer .
Stopper said:
hi all, Gratz for great forum.
I received from friend of mine a brick called HTC - on back is label ARTE100.
it is freeze on bootscreen, that is good for now.
BUT i have information that it is comming from Netherlands, and was locked before.
Someone else is bricked upgrading it without CID unlock beforehand.
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
And is there any available factory ROM from this carrier.
There is no sign or any label on it.
freezing screen is:
IPL 3.04.0001
SPL 3.04.0001
GSM 02.93.90
OS 3.4.0.0
Thank You Very much for any answer .
Click to expand...
Click to collapse
imei is usually under the battery
and for availiable shipped rom versions click my signature,go to artenis section and under "upgrading" choose availiable shipped rom versions(or click here),also if you want you can try this before flashing the rom...the instructions are there too,just download the mtty and follow the steps from the link
Stopper said:
[...]
I have tried almost all available original ROMs, well some of them missed.
My question is is there any way to check by IMEI , which carrier was before?
[...]
Click to expand...
Click to collapse
I guys, I'm trying to repair my ARTEMIS that I bricked but I don't know which was the original rom because I have flashed with WM6 original rom the day after I bought it.
As asked by Stopper there is a way to know which was original rom so I could try to restore it by SD card?
thank you so much
bye
There's no way through the device (no device flash history), however it's usually the stock carrier ROM so try flashing to that.
kareem9nba said:
There's no way through the device (no device flash history), however it's usually the stock carrier ROM so try flashing to that.
Click to expand...
Click to collapse
The answers are confusing, I have one Mda Tmobile (Artemis) with exactly the same problem. It had german rom originally, and I tied Uspl and had error at the end, maybe the version was lower cause i did not check. Since I could not be able solve it. when you try wwe rom it says invalid vendor Id, any other rom give ivalid model id error.
Is there any solution available for this?
Thanks
Kenny
keke1 said:
The answers are confusing, I have one Mda Tmobile (Artemis) with exactly the same problem. It had german rom originally, and I tied Uspl and had error at the end, maybe the version was lower cause i did not check. Since I could not be able solve it. when you try wwe rom it says invalid vendor Id, any other rom give ivalid model id error.
Is there any solution available for this?
Thanks
Kenny
Click to expand...
Click to collapse
run the official exe
find it's content in users application data (in documents and settings)
copy to somewhere else
delete the spl.nbh and run the ruu
it worked with herald which was danish and now is wwe
haven't tried it on artemis,because it was wwe,but it should work