i tried everything... reinstalled active sync, reset my comp, hard reset my 8125, it wont get no signal nor will it sync to my computer...i have xd6 on there this started happening after i tried to upgrade to t mobile uk radio version 2.19
What are you running? IPL/SPL?? ect...
Related
I have a Siemens SX-56 a usb cable and SD card and while using the Special Edition ROM heres what happened:
When updating the ROM (it said updating on the PC and on the phone), I received an error message on the PC. It told me to unlplug the device, do a reset and try again. I tried that, but the seimens SX-56 still displayed the screen that says upating ROM. Reseting does not seem to work.
I am using the usb cradle that came with the phone. I used active sync to
connect to my PC. Yes, All the phone says now is "upgrading, will take about 5 minutes. I tried flashing the ROM last night. The phone has been in this state for at least 15+ hours. Doing a hard reset does nothing. All the pc said was "an error occured while trying to upgrade, please remove the device from the power source, reset the device and try again."
Now the phone won't connect to the pc via active sync.
Thanks.
I have a Siemens SX-56 a usb cable and SD card and while using the Special Edition ROM heres what happened:
When updating the ROM (it said updating on the PC and on the phone), I received an error message on the PC. It told me to unlplug the device, do a reset and try again. I tried that, but the seimens SX-56 still displayed the screen that says upating ROM. Reseting does not seem to work.
I am using the usb cradle that came with the phone. I used active sync to
connect to my PC. Yes, All the phone says now is "upgrading, will take about 5 minutes. I tried flashing the ROM last night. The phone has been in this state for at least 15+ hours. Doing a hard reset does nothing. All the pc said was "an error occured while trying to upgrade, please remove the device from the power source, reset the device and try again."
Now the phone won't connect to the pc via active sync.
Thanks.
Don't be worry.
the problem can be fixed,contact me!
Tommygunz, you can use the sd card method of flashing.
I had this problem before and i solved it, but i forgot how to solve it now. I"m using activesync 4.1 and when i connect my phone it syncs, but after a minute or so it disconnects as if i unplug the usb from my jam. Also same thing with bluetooth connection. Should i reinstall activesync? because i think what i did last time was uninstall 3.8 and install 4.1.
i had this problem with the activesync 4.0 . when i tried to update my device with the WRONG rom's , after the error appears, could never sync my PPC.
SOLUTION- uninstall and install a fresh Active sync. there is no danger to lose your contcts and all theese staff but... keep a backup in your phone!! good luck :wink:
Hi all,
I have an XPA S200 alias Prophet from Swisscom Mobile. The first thing I did was installing the "PDAMobiz Editon Upgrade Rom for SPL 2.15.0001" ROM which worked well for a while.
Now I can't sync it anymore using the USB connection (IR works). Yesterday I installed the ROM again, restored my data and was able to sync. I thought ok, everything is ok now. But today sporadically I have the same issue again.
If the connection is not ok, my computer only shows an unknown device.
Does anyone have an idea what can cause this problem. It seems like the USB port of the device is blocked from time to time.
By the way has anyone an English version of the original Swisscom ROM for the S200? I have forgot to back it up before installing the new ROM.
ROM version: 2.15.13.27 WWE
ROM date: 3/9/06
Radio version: 02.19.21
Protocol version: 4.1.13.09
ExtRIN version: 2.21.13.102 PDAMobiz.com
I have ActiveSync 4.2.0 (Build 4876) (English) installed on my computer.
Best regards,
Tom
Today I was playing around with my device. I tried several things, but it is not possible anymore to connect using USB. Even a ROM upgrade doesn't work anymore.
I can still sync my device using IR, but any ROM changes are not possible anymore.
Don't know if this will help but found that connecting the SPV M600 to the USB lead occasionally tripped out the USB 2 port on the computer. Just switching the computer off and on didn't help as it was only a soft reset. Switching off and disconnecting from the mains for 60 seconds, then switching on again reset the USB port and allowed activesync to work again (untill it tripped out next time). This has happened about 5 times now in 3 weeks. This applied to all USB ports, not just the one connected to.
Unfortunately this doesn't help. I made some further tests. A friend has the same device.
Using my computer I can sync his device but not mine. Using his computer we can sync his device as well but mine doesn't.
But again suddenly it was possible to sync sporadically. Now I think there is really a problem with the USB connector of the device.
Because I assume a hardware problem and need to contact the vendor I need to get an original ROM from Swisscom now (no matter which language/English preferred).
Does anyone know where to get such a ROM? Swisscom currently doesn't offer any to download. Additionally is there a way to upgrade the ROM using an SD card?
I think I got one step further. When I use the USB-switch tool and change from rndis to serial and back Activesync connects again.
For a moment it is connected and syncing but then it gets disconnected again.
No matter what I try the connection is not stable.
Hello,
this sounds like exactly my problem.
Previously i had T-mobile MDA (with dipod rom), and it worked fine, no problem at all.
Now i have a prophet (again Dopod rom), and i've had nothign but problems. Activesyc initially worked once or twice, but has not for a long time now. i've tried deinstalling, re-partnering, deleting everything, etc. I've even now had XP re-installed on the computer and done a cold boot on the Prophet...now change!
The only thng that works is syncing via infrared! This works every time, no problem at all.
I have no idea what the issue is...but it is very frustrating.
i have the same problem, it worked for two weeks. today suddenly does not connect anymore. WTF? I install new activesync, rebbot divece, computer & still nothing...
doesnt work on other computer also... Which files are inportent on divice to connect it with activesync? Please help... tnx
After I upgraded to radio 1.16 on my 8525, I found that after disconnecting from the data network, I canot reconnect. Only was to solve this was a soft reset. Now I have upgraded to 1.20, and now after i activesync with my PC, I cannot reconnect to the data network either. It has done this with two different radio versions...should I downgrade to 1.13? What did the 8525 come with preinstalled? It connects quickly the first time after a reset, and when trying to reconnect it only tries for half a second and says "the modem has disconnected, or dismissed"
Thanks for the help!
The only way that I could fix it was to reflash the rom, downgrade the bootloader and reflash the radio