I'm having trouble updating the rom. i've got it downloaded, and i can connect to activesync, but as soon as i start the installation for the rom, it disconnects from activesync and some times goes to the rgb screen. does anyone have any suggestions?
also, im having trouble keeping a connection in general in activesync. it rarely connects all the way and its a huge hassle. any suggestions?
simplist answer would be a faulty USB cable. try another cable and port. besides that it could be driver issues, phone issues, software issues etc etc.
If you go over to the Cingular Forums (HTC), with a search you will find your answer. I believe that you need to establish your usb sync connection before you start download. And then, you need to wait approximately thirty minutes for the full ROM update to load and install. It is normal to see the RGB screen as well as seeing that sync connection is lost. Just ignore. But, once again, you might want to check Cingular - oops, the new AT&T
Same Problem here
I have updated several ROMS, but had some problems with Black Magic. Wanted to go back or re-install it...
Do have SPL-2.10.Olipro !
When I do have a connection thru Active Sync to my Hermes, I start the update-application, it starts, my device is going into the bootloader screen, but the connection is lost....after a while my PC is given me the ERROR 260-message...
Used 2 different cables, several USB-ports...without a USB-connection checked in Active Sync, my Hermes never connects to my PC..
Please help...what do I do wrong, did I demolished my Hermes or what???
same here
anyone find a straight answer to this in the other threads?
Look HERE for problems occuring during upgrades. I found that it answers just about everything that could and does, happen during upgrading
Also make sure you have Hard SPL installed and follow the directions carefully. Go HERE for that
These 2 links should answer just about all questions regarding upgrade problems. There's also a link to Mr. Vanx Upgrade Guide in my signature. Extremely helpful
if you can i would suggest ...upgrade the rom dicetly from de micro sd card its the best way i think, you will never have the usb problem again because you will not need it.
Related
Activesync just keeps trying to connect and is never successful. I have re-installed Activesync on my pc but it didn't help. Also, my work pc doesn't connect either. Definately a problem with my 8125. All has been well for a couple months and I have added no new software before the problem started. This problem also happened about two weeks after I got the phone and the only resolution was a hard reset. What a pain reinstalling all the software and settings I have now, it's customized just the way I like it. Anyone know how to re-install Activesync on JUST the phone or have any other ideas?
Try the latest activesync 4.2 beta and disable any firewalls if possible on the pc. On the device start activesync application and go to menu\options - delete pc that you are syncing with and try again.
Deleted profiles on both pcs installed beta on one. Still no connecting. Tried clicking SYNC on phone, pauses for a second then nada. No connection.
Have you deleted profiles on the device? and disable firewalls, and if you have a network adapter enable it because latest activesync treats the connection with device as a network - there are many posts on this issue do a search and read through some - seem to be many different factors involved.
First- Thanks for the replies Mark
I removed the PC profiles from my 8125. Also reinstalled Activesync 4.2 on my work pc. Nothing. Although this time I got an error message- Cannot find the file "http://go.microsoft.com/fwlink/?linkid=65257&clcid=0x409" (or one of its components) Make sure the path and filename are correct and that all libraries are available". Like I would know what that means. Anyways, no firewall enabled. Besides, this should not be happening, all of a sudden, on 2 separate pcs. That kinda rules out a pc problem. It has to be in the phone. That, and the fact that a hard reset fixed it last time. I'm thinking something corrupted in Activesync on the phone???
And searching on this forum is useless. I type in "connecting Activesync" and every post with either word shows up. 614 in just Wizard forums alone. Is there a way to search so that ONLY posts with both words show up? That way I can modify my wording until I find something useful. Search for any terms or use query as entered is ticked. On other forums you can just use quotation marks but not this one. It makes searching very difficult. ROB
Oh, and yes my network adapters are still enabled as always.
Yes best to search with the word AND cuts out all the other stuff i.e. activesync AND connection would do it. Yep sounds like it may be the device.
found couple of posts that seem to be relevant
http://forum.xda-developers.com/viewtopic.php?t=41955
http://forum.xda-developers.com/viewtopic.php?t=44182
http://forum.xda-developers.com/viewtopic.php?t=49161
http://forum.xda-developers.com/viewtopic.php?t=44574
Happy reading, the last post is about connecting activesync via bluetooth so maybe thats an option.
Thanks Mark. I think I may try the bluetooth connection when I get home tonight. Or I may just throw in the towel and do a hard reset. that worked last time. Plus, I can install the latest ROM upgrade. Shame theres no way to uninstall and reinstall Activesync on the phone. Seems that should do the trick (maybe). Just tried my friends 8125 on my work pc- syncs just fine. So much for all the pc fixes everyone seems to be trying.
I had the same problem with AS refusing to connect via usb or BT.
In the end i went & purchased (although the demo version would have done) Sprite backup. installed on the PC. Browsed to the install dir to find the cab file. copied to my wizard (wifi, or sd card reader etc).
Insatlled & backed up to SD card
Hard reset
restore
stop here if you're happy, if not
AS to sync calender & contacts to pc
hard reset
update ROM
AS contacts, cal, docs etc back to wizard
install SW & settings
BACKUP
Yep. Had to hard reset. All is working again. Crappy Activesync. What's up with this P.O.S. ? Trying to setup bluetooth now and the pc finds the phone but AS won't connect. The phone finds the pc (HomeCenter) but it shows no services available. I'm assuming that there should be some listed (maybe Activesync?) Guess I'll have to do some searching for bluetooth problems with AS now. Did I mention that AS is a P.O.S??? But you all knew that already. :lol:
Dont forget to open a port in you BT settings (on the pc) and tell AS (also on the pc) to accept connections on that port.
Then your wizard should be able to see the AS service on the pc (you initiate the sync from the phone, not the pc)
I have had this problem since day one, and continue to have it despite several (more than 15) hard resets, multiple ROMs, multiple pertnerships etc. I plug in my PPC USB, and it just says "connecting" forever. Every time, after plugging in my USB, I have to shut off my PPC, and turn it back on. Then my laptop finds and connects with my PPC, and syncs all my data like it should. If I do this more than 3 times, my laptop crashes and reboots. If anyone has figured out how to fix this, let me know.
Hey guys,
Ok this sync is really bugging me, first it took me ages to work out why when i plugged it in the connection went green ina ctive sync and said connecting but wasnt working no matter how long i gave it - turns out it was a firewal problem,
but now when i plug in my wizard and the wizard says connecting under active sync but my computer active sync doesnt do anything, i tried switching usbs restarting both PC and Wizard to no avail, i know my PC is seeing somthing there because it says at first (when i plug into new USB port) found device etc etc, but then it installs it as a network connection and trys to aquire an IP/Network address from it!! that doesnt seem right to me!
Any advice would be great
Thanks
Nathan
hmm has anyone with a working active sync noticed if its installed as a network device for you? does the wizard work as a USB - GPRS modem? because that would explain that bit.
Thanks
Hmmm...
I'm gonna guess that no one is responding because you've basically said some things that lead everyone to believe you've not researched your device or problem before starting a new thread about issues that have been covered time and again.
First, by default Windows Mobile 5 (WM5) connects using the Network Connection method. If you want to use the old USB Serial connection your will need to upgrade to an AKU 2.2 or AKU 2.3 Rom.
Second, if you use the search function (see the top center of the screen) you will find numerous threads discussing several issues with ActiveSync.
Newbies are always welcome but you need to at least try to find your answers before just plopping donw a new thread.
Hi,
I did a search, and tried most of the suggestions, but i dont get this AKU2 thing? and couldnt find a deifnition.
but anyway im since broken the phone so thanks anyway guys
Check your vpn option and firewall option. If you using cisco vpn then uncheck "statefull firewall (always on)".
Hi all.
I had ActiveSync setup back in California on my computer, but now that I am at my parents place and have been trying to setup activesync on there computer to sync with my mda.
I had no problems back in Cali, but now when I load ActiveSync and connect the device, etc. it says that device is not connected and therefore I cannot sync. When I plug the device the computer recongizes that there is a windows mobile device, and ActiveSync tries to connect but with no success.
Does anybody know what I should do to fix this problem? I've searched and haven't really found anything specific to my problems, and I really need to be able to sync my mda for I won't be going back to my computer for a while.
Thanx alot
peter
I'd suspect a firewall issue. Use this guide from Microsoft to troubleshoot ActiveSync 4.0/4.1/4.2 USB Connection Troubleshooting Guide
Good luck!
I've already troubleshooted, and we're talking about the firewall for my internet, right? Because if thats the case I've already disabled the firewall for all of my connections. Would there be other types of firewall that I should be aware of?
*I've tried it on another computer in the house, and I get the same problem. It recongizes a windows mobile device is connected, but it won't pick up the usb connection through activesync.
Thanx again
I am having the EXACT same problem... Does anyone know how to fix it???
Does anyone know how to fix it???
i m having the same problem
hi
i upgrade form 1.6 to 2.2, rom available at t-mobile
its fast but active sync turns green then turn off
nothing happenes
the older 1.6 rom was workin fine
well im still having this problem, so if anybody knows who how to fix it im in need of help.
btw... i haven't upgraded my rom yet.
thanx alot
try file/delete mobile device in activesync and see if it still does it.
Anymore tips??? I havent been able to sync for 2 weeks now!!!!!!!!!
I am having the same problem with my MDA. My 8125 never had this problem its quite the PITA.
May not help...
You may have already tried all this...
First, don't use Activesync 4.2. Uninstall it, reboot, and install 4.1. I couldn't get sync with two PCs with 4.2. Removing it is a nuisance since it starts automatically and doesn't have an off selection; I use activesynctoggle.exe to turn it off. I keep activesync around since activesync problems sometimes can be fixed by turning it off and on again.
Second, if you are running zonealarm or another firewall, the procedure for permitting sync is more complicated; see e.g.
http://www.pocketpcfaq.com/raj/ZA.html
Third, remove the connection from the PC (on activesync, File/Remove Connections) and from the PPC (run activesync when not connected and remove), remove activesync from the PC and reinstall, and start fresh. Use a USB cable and don't mess with Bluetooth -- it is *much* more sensitive, as I found out painfully.
Good luck. It is really amazing that microsoft can't make software that syncs two microsoft operating systems, when Palm can make software that syncs windows with the palm OS reliably. Activesync is one of the worst programs I have ever encountered, and the release of 4.2, which seems to work less well than 4.1, is astounding.
Well my device stopped recognizinig my sim car yesterday so my device is worthless.
DOES ANYONE KNOW ANYTHING THAT CAN HELP!!!!?!?!?! I HAVENT SYNCED IN 25 DAYS!!!!!!!!!!!!!!!!!!!
PLEASE HELP!!!!!!!!!!!
A little more info please. Saying you have the exact same problem isn't enough! (trust me, no two people or computers have the same problems, exactly)
Please post what you're doing, AS version, ROM version... actually anything that might help us possibly help you.
When I connect my 8125 to my computer activesync doesnt recognize it on the computer or the pocket pc. But yet it still makes the chime noise. Im am still able to charge it on my computer, but activesync says "no connection"
ROM version 2.25.11.1 WWE
ROM date: 5/11/06
Radio version 02.25.11
Protocol version 4.1.13.12
ExtROM version 2.25.11.102
Did you even try the suggestions I made?
Rjp20 said:
When I connect my 8125 to my computer activesync doesnt recognize it on the computer or the pocket pc. But yet it still makes the chime noise. Im am still able to charge it on my computer, but activesync says "no connection"
Click to expand...
Click to collapse
I have had a similar problem and solved it with those procedures. Activesync is unreasonably sensitive and sometimes removing the program and connection and starting over seems necessary; then it will work until some setting or other gets messed up.
I'm having a similar issue but when I connect my T-Mobile Vario II (HTC Hermes) it starts the process but as soon as it's about to start syncing my PC reboots. I've just got a new laptop and it syncs fine. I've been using ActiveSync for many years and this is the first time I've had this issue. I've also got an Orange SPV C500 (can't remember which HTC device that is) but it's a smartphone and it still syncs fine.
I don't have any software firewall enabled as I'm behind a hardware one. I've looked round the web but no-one seems to have this issue that the system reboots.
Any ideas? I've re-installed ActiveSync, I've not tried removing the partnerships off the device yet but I don't think it's even created on. I've tried repairing Outlook but that didn't help. I may try re-installing Outlook but that is a bit of a last resort.
Thanks in advance,
Rob.
I also had a no connection when I first connect to new computer....
Check the network connections, there should be a new network connection created for the computer/pda, check the properties and make sure all checkboxes are selected.
Mine wasn't ticked in the beginning, and was able to sync after I selected all the boxes...
WeeeRob said:
Any ideas? I've re-installed ActiveSync, I've not tried removing the partnerships off the device yet but I don't think it's even created on. I've tried repairing Outlook but that didn't help. I may try re-installing Outlook but that is a bit of a last resort.
Rob.
Click to expand...
Click to collapse
Windows XP has an event viewer (Control Panel/Administrative Tools/Event Viewer) that can probably tell you what took down your system. That would help isolate the problem - maybe.
Nothing so far... Does anyone else have any tips...
Hi All,
failry new memeber when it comes to posting but have been using you guys as an essential source of bugfixing, problem solving and general HTC MDA advice since my TYTN.
I have spent sometime searching but not been able to find anyone with an issue similar to mine.
So heres the thing, recently exchanged my TYTN for a TouchHD and overall extremely impressed with both the handset and dev work done on here already.
I am running Dutty's 1.7 rom coupled with Radio ROM 1.09.25.35 all has been working and syncing wonderfully, however today when i try to sync up to my laptop to upgrade the radio to 1.10.25.25 i cannot get the darn thing to connect to activesync at all.
I am running XP SP3 and activesync 4.5 (again successfully until today)
I am using a non HTC USB lead which i know is generally a no no, however i sync'd up my kaiser with this lead for over a year and have been successfuly syncing my HD until today. I have tried an alterante USB lead just in case, again one with which i had no issue on the Kaiser.
I have tried to sync with the firewall on and off, also with my AntiVirus on and off
I have tried disabling Start_settings_USB-PC "enable faster data sync" to no avail.
I have tried the cusomary uninstall and reinstall of a fresh MS downloaded Activesync again no joy.
When I connect my HD to the pc and select connection type "Disk Drive" it recognises it instantly and allows me to browse the microSD card
When i connect with connection type "ActiveSync" it opens activesync, and displays connecting for smoe time and then decides it can't connect and offers me a diagnostic scan.
I have run the scan and saved the log file for information.
so basically the laptop can see my HD, activesync recognises a device has been connected via USB but refuses to finalise the connection. Oh obviously i have tried the "connect all using the connection" setting in activesyn on the HD as well. Figure the more i can tell you about what i have and havent done now the more time it saves you guys.
Its almost as if a process or service has been stopped or deleted on the device but i am buggered if i can figure if or what that maybe.
Any help appreciated guys. Obviosuly i will as a matter of course re-attempt all the above with the official HTC USB cable when i get home, but honestly dont see this being the issue considering the history of effectiveness of these cables.
I look forward to a flurry of interesting responses for me to try. Big thanks to all those who have made my WM PDA experience spot on to date.
Dboy
Update as promised.
Have got home and tried to connect using the HTC cable but still no joy.....
What could possible have gone wrong ?
No one any ideas ??
Hello,
I got a very similar issue, after some investigation I found out that it was my calendar causing this strange connection behavior.
Please do the following test,
1. delete your phone in active sync
2. reconnect your phone with the PC using the USB cable
3. When it asks for the synchronizing options (by default contacts, calendar,E-mail, favorites & M office one Note are ticked), REMOVE the tick of the calendar.
4. After finishing the setup wizard the synchronizing process will run as expected
So in my case I'm having trouble with the calendar, why ? I don't know but maybe someone else might have an explanation.
Good Luck
I encountered similar problems with ActiveSync previously but it was solved not via a soft/hard reset of my HD, but after I reboot my PC. Hope this can help you.
Note: I rarely shutdown or restart my laptop. I simply leave it to hibernate.
Reset HD Touch to get syn again.
One day could sync next day could not.
In the end did soft reset of phone all OK now.
Think the problem is I took a photo and it took ages to save it?
Thinking of put small hole in case so I can do a soft reset without the pain of unclipping cover. Any thoughts.
I have searched this forum, found some Sync issues but nothing that relates directly to my issue. If I just didn't see it, point me in the right direction please!
I have a TILT2, stock ROM, I have made some reg mods for text msg notification, Data speeds & auto rotate via G-Sensor. My phone was syncing perfectly fine for a few weeks and I have the USB to PC "Enable Faster data sync" unchecked.
I lost sync a few days ago, I rebooted phone & computer figuring that would fix it as it has in the past only to find I only get charge light, no data connection. I don't hear the bum-bum audio indication that it is connected, and the device does not show under Device Manager nor mobile device manager and my connection methods include USB & Bluetooth.
Here is the caveat, I can sync to the computer through my bluetooth on my PC and I do hear the audio tone connection. I figure a reg change affected this, but I reviewed my changes, nothing dealing with USB, and I even reverted back to a Reg backup from prior to the problem occuring - no luck. I have swapped USB cords, nothing has helped.
Does anyone know of registry setting that would disable my USB sync? Do I have a defunct device?
Assistance appreciated - Dan
djwinn said:
I have searched this forum, found some Sync issues but nothing that relates directly to my issue. If I just didn't see it, point me in the right direction please!
I have a TILT2, stock ROM, I have made some reg mods for text msg notification, Data speeds & auto rotate via G-Sensor. My phone was syncing perfectly fine for a few weeks and I have the USB to PC "Enable Faster data sync" unchecked.
I lost sync a few days ago, I rebooted phone & computer figuring that would fix it as it has in the past only to find I only get charge light, no data connection. I don't hear the bum-bum audio indication that it is connected, and the device does not show under Device Manager nor mobile device manager and my connection methods include USB & Bluetooth.
Here is the caveat, I can sync to the computer through my bluetooth on my PC and I do hear the audio tone connection. I figure a reg change affected this, but I reviewed my changes, nothing dealing with USB, and I even reverted back to a Reg backup from prior to the problem occuring - no luck. I have swapped USB cords, nothing has helped.
Does anyone know of registry setting that would disable my USB sync? Do I have a defunct device?
Assistance appreciated - Dan
Click to expand...
Click to collapse
Is this of any help to you?
http://modernnomads.info/wiki/index.php?page=Windows+Mobile+Device+Center+Troubleshooting
Thanks for the link - I had found this before, and it really deals with no connection at all. I ran through most of the post, nothing helped. Considering I have sync via Bluetooth, it is not firewall.
Looking at restoring my computer to sometime last week, see if an update that came through caused this.
I'll post more when I done the restore.
OK - Update. I restored my PC to prior to issue, no luck. I disabled my security suite, no luck. I have tested the phone on another PC, it acts the same. communicates via bluetooth, but only charges via USB.
I am starting to work my way through the phone registry, is there any specific setting I should be looking for?
I'm just going to throw in a suggestion here: have you tried using a different cable? Often times the cable is the bad piece of the connection, but people don't even think to switch it out with another one.
And as well as the cable, have you tried a hard reset on your phone?
same problem!
i have the same problem. went to htc and they told me sorry you have a 3rd party rom so we are not going to help you.
yes i have treid 4 other pc's and 3 difrent cables and no luck.
please help!!!!!
Ferdi_H said:
i have the same problem. went to htc and they told me sorry you have a 3rd party rom so we are not going to help you.
yes i have treid 4 other pc's and 3 difrent cables and no luck.
please help!!!!!
Click to expand...
Click to collapse
I had the USB port go out on my TP2. I used the SD card to flash the sock hard SPL and then used the SD card to flash the stock T-Mobile ROM. Then I sent it in for warranty exchange. I suggest that you do this and then seek help from HTC.
cool can you perhaps help wit how to do it? please?
Ferdi_H said:
cool can you perhaps help wit how to do it? please?
Click to expand...
Click to collapse
Instructions are in this Forum:
http://forum.xda-developers.com/showthread.php?t=550540
Reversing hard SPL is here:
http://forum.xda-developers.com/showthread.php?t=649191
same problem here and the problem that the battery was draining even when the phone was off. call htc and the next morning the ups was at mine house to get the phone. 7 days later the phone was back with new motherboard. a had started a tread in general of this problem
Yep, mine too. I had to send it back to HTC UK for repair after the USB socket stopped working - came back with a new mainboard.
It looks as if it's prone to failure as I'm careful with connecting and disconnecting cables and it looks as if this one is already starting to go again!
Can't fail HTC UK Repair for it's great service though...