how can i disable the standby LED blinking? - JAMin, XDA Neo, S200 General

hello,
my prophet's green LED blinks all the time, when i have a signal.
is there any way to disable this or to manipulate that? for example no blinking or using the red LED for this would be nice.

Yes, have a look here:
http://forum.xda-developers.com/showthread.php?t=282545

thank you for that link

Related

Changing led

Is it possible, with a registry tweak perhaps (?), to swap the green standby led with the blue one?
Resulting in that you have a blue led blinking instead of the green one..
There is a tweak to turn every led off, but I havn't seen a tweak for this anywhere..
kick

How many LED's and what for?

Can you please tell me how many LED's are on Trinity and what kind of missing calls, messages notifications are present, hopefuly via LED which rapidly changing colors?
In the manual it says:
Left LED:
This LED shows the following:
• A blinking Blue light for Bluetooth system
notification of powered-up and ready to transmit
radio frequency signal.
• A blinking Green light for Wi-Fi status.
• When both Bluetooth and Wi-Fi are enabled, their
lights blink alternately.
Right LED:
This (bi-color) LED shows Green and Amber lights
for UMTS/GSM standby, UMTS/GSM message,
UMTS/GSM network status, notification, and battery
charging status.
Click to expand...
Click to collapse
so, when I miss phonecall or sms this right LED will notify me by changing lights all the time until I confirm event, how visible it is? It is very important to me that just by looking at phone I know I have something to check.
Took me a while to check, but here it is:
When charging, the right LED will show a steady amber light, it turns steady green when fully charged. When not charging, the right LED will blink green to indicate GSM reception.
When you have recived a sms, or a call, which you didn't answer, the right LED will, whether it is charging or not, start to blink amber until you have read the sms, or have seen the incoming number.
So in short, blinking amber right LED is either a missed call, or sms.(probably mms too)
That's it, I'm planing to buy this wonder and your input is very helpful, thank you very much!

touch hd led light

i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
This is not a led is a light sensor.
akhoury said:
i just purchased a touch hd and was wondering why the led indicator lights are not flashing?
i notice that there is an led indicator light on the power button and also next to the earpiece; from my old tytn II, the led indicator flashed amber for service and also blue for bluetooth.
i currently have service and my bluetooth is on, but i don't have any flashing indicators.
is there a setting to turn them on?
Click to expand...
Click to collapse
The one next to the earpiece is a light sensor.
The other flashes green for missed event, stays green for finished charging, amber for charging, and flashes amber if you're low on power.
Is there a registry hack to get the "old" LED behaviour? (Cell locked in=Flashing green, Notification = flashing yellow, Bluetooth = flashing blue etc.)
I don't think there is a solution for this (yet).
in anycase, it is only a bi-colour LED - ie Amber and Green - no blue.
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Dani3l3 said:
I have the same problem: my green led flashes for missed calls but not for incoming messages.....
Can you help me?
Thanx a lot
Click to expand...
Click to collapse
Start, Settings, Personal, Sounds & Notifications, Notifications, Messaging: New text message, Flash light for....
That LED is so tiny and dim I find it's easier to just hit the power button and look at my screen to see if I have missed calls/texts/etc.
well theorticall you woud have to seek out the powr button with eyes first
kdding
Thanks.....
My HD have an Italian ROM and the translation is poor...... nothing about "led blink"
I've resolved checking a flag translated as "turn on screen if incoming message".........
I think i'll try a WWE rom.....
Thanx a lot
dani, that is the correct option. Italian translations suck

can I turn off blinking yellow light?

I have the HDC 3600i Pro.
This is a little annoying (at night) so I wonder if there is a function to turn off the yellow operation light or at least stop it blinking.
note I'm talking about the light just above the screen.
I think the light is the one that says you have a link to the mobile carrier and the simplest solution is probably to put your Trinity face down on a cushion. It's what i do.
I did eventually find a hack called LED killer which I install and no blinking light
note it just disabled the blinking behaviour all the other functions like charging and wifi and bluetooth are still active..
exactly what I wanted
I think the LED killer is good for all HTC devices apparently.
Yes, you can change the led status by nueLed, i do the same for the Status Led that disturb my sleep
http://forum.xda-developers.com/showthread.php?p=1954259
Bye.

Green/blue led ?

Hey guys!
When my Uni is running, the green led is flashing.
I was wondering, if it is possible to change the signal from the green led to the blue led,which is intended to show bluetooth.
That would make the blue led to flash all the time, and green would be flashing, when the bluetooth is running.
Is there any tweak or program, that changes the signal to the leds?
Thanks for the answers!
Greets from Slovenia!

Categories

Resources