scroll wheel ? - 8525, TyTN, MDA Vario II, JasJam General

So i've been using my hermes since december i think but my scroll wheel has been acting wierd since day 1 and was wondering if anyone else experiences the same thing.
Basicly as i scroll down the page (or whatever i'm scrolling) jumps up.
It looks like for every 2 clicks down i get one click up... anyone else having this issue? should i send it in for warranty repair?

I get that randomly and I have seen it reported before. Not aware of anything possible to fix it though.
Mike

my scroll wheel has been playing up a month after i got it and now i don't even bother to use it since its useless and irritatingly so ie. you scroll down and the cursor goes up!
oh well, just ignore it till i upgrade to the next phone

my969 said:
my scroll wheel has been playing up a month after i got it and now i don't even bother to use it since its useless and irritatingly so ie. you scroll down and the cursor goes up!
oh well, just ignore it till i upgrade to the next phone
Click to expand...
Click to collapse
yah i was thinking along the same lines... posted this cuz i was curious to how many are seeing this and if i should send it in for warranty repair...

mine works, but i feel the quality is poor.
I have to be EXTREAMLY carfull when i press the scrol wheel in that it doesn't scroll up or down as its being pressed in!
the quality when compared to a blackberry scroll is IMHO very very poor.

I have similar problem. I can scroll down without problems (and very exactyl), but scrolling upward need 2-3 times more finger action (and is not ecact too, sometimes jumps 1 line up or down).
First I thougt its hardw
re related (maybe dirt in the wheel) but after a hardreset its gone. But comes back after some software is installed.
Thats really bad, because the scroll wheel is the key for 1 hand usage!
Why HTC can not use Sonyericson (P900) type of wheel?

I have the same problem but it started after 5 months of my i-mate JasJam usage. I went to warranty claim center and they boot it up with clean installation. It seems work for some hours fine then again started to skip the lines of selection. Till now I am also searching for solution coz I can't go again and again to that place its far away man. I think it is neither hardware problem nor software problem. The thing is its flop and HTC has removed it from their new device HTC Touch.
This jog system came in Sony (not Sony Ericcson) mobile and it failed to take share in market even .000001 %. Now you will not find any device with this thing coz dust make it weak to sense and if I am not wrong just recall the 70's and 80's radio transisters

Decrease sensitivity?
Scroll wheel is perfect thing, but I experience same issues as mentioned above. I think that if possible to decrease it's sensitivity (maybe registry value or some more dirty software hack) will make it more precise and without counter movements (up instead of down or moving during push).
My opinion is that scroll wheel is order of magnitude better way of control than sliding with fingers over screen (iPhone is spreading this stupidity all over and designers are blindly copying that).
So, anyone that is capable of decreasing Hermes scroll wheel sensitivity?

My problem with the scroll wheel is that in a program or settings list, it scrolls up and down but jumps and doesn't go across first, then down.

Related

The wheel gets weird

More and more often my wheel works not good: it either causes multiple scrolls on one click, or even scrolls to the opposite direction. I experienced a similar problem on SE P800, but only after almost a year of use.
Am I alone with this problem?
Mine is still working fine.
Mine does that too from time to time. Slightly mushy, sometimes goes backwards.
I tell you, it's not the 5 way piece of art on the p800/p900. I miss that...
It's taken so many years for us just to get a wheel
V
I've had this problem with the wheel since I bought the thing! Seems to be getting better with time though.
Mine does it too mainly going down one place when I press the wheel in but it's not enough to drive me mad - yet.
The wheel work on digital encoding (usually 3 bit) when turning and just a simple push button for select - if the contacts inside get dirty (or worn) it can produce a bit pattern when turned which makes the decoder think you have gone the other way, i.e. it goes 000 > 001 > 010 > and insted of 011 it gets 001 thinking you have gone the other way. It is normal on these type of devices (more expensive rotary encoders use magnets) and if it gets too bad cleaning the contacts with isopropanol alcohol can usually fix it.
Gav.

Weird Touchscreen behavour - Video Doku.

Hi, I'm a big fan of the HD2 but in the last two weeks, since i own this device, i'm getting confused by some screen imput behavour that i will present you.
I want to figure out if this "screenbugs" i have to fight with every day, are normal or a hardwaredefect. To make you guys an imagine of what i mean, i uploaded some youtube videos for each bug.
1. The first one i call: The painting edge
This bug is only present if i not have installed the less sensitive CAB from this forum.
Explaination:
Many of you have notice that the glass of the screen doesn't fit exactly in the case of the device. The right bottom of the glass protrude a very little. Then i lightly press on this position, the screen notice a press on the right top...as you can see in notes on my youtube video:
Video 1: http://www.youtube.com/watch?v=c49x9vB4bzQ
------------------------------------------------------------------------
Beforce you say...my device doesn't having any of the following bugs, REMEMBER, This bugs are not present every second. Sometimes i can use the device for 30min without having some of this.
------------------------------------------------------------------------
2. The Electrocardiography
This bug, i think could be the reason for the following bugs.
Explaination: Trying to draw a straight line an you think you device will get a heart attack soon.
On the half of my second try you can see how the device suddenly works normal again.
Video: http://www.youtube.com/watch?v=t54m1dSLnV8
3. The shaking Screen
Explaination:
I have notice that some other guys have this bug too. You can see this on every scrollable screen, like opera, IE, zoomed pictures, the manila tab, startmenu...etc. etc.
Best seen on minute 0:54 in my video.
Video: http://www.youtube.com/watch?v=6hIE_wV4djs
4.The non pressed key
Explaination:
You are cofused about keyboard reaction while writing a text message? You type an "a" and getting a "t"? Than you have "the non pressed key" bug how i call it.
you have to watch on some key input where my finger is totally out of range. I don't mean the fault input next to the key i pressed...
Video: http://www.youtube.com/watch?v=_B1GiyMp_O4
----------------------------------------------------------------
There is a fifth bug i didn't get on video yet because it is very rarely.
I had have this bug only 5-6 times since i own this device, but it sucks realy hard.
I call it
5. The self-typing keyboard
Explaination:
Then i'm typing some text sometimes the keyboard begins to typing without having the finger one the touchscreen. it can be have a duration of 5-10 seconds or 20 letters/numbers.
It can also be watched, without keyboardaction. Then the screen scrolls wild in any direction without any finger on screen.
Video: http://www.youtube.com/watch?v=-fdXU8SoPTg from htcracer211
----------------------------------------------------------------
If someone can tell me if i can embed the youtube videos in this forum...
Go get a replacement, the screen is perfect. Although I admit it does not fit correctly but it is great. I only need the earpiece fix
please watch the videos before you comment anything...
...You're too much electrostatically charged...
...Or something of electrostatic is in the range of your device...
But it's like your touch panel is faulty. Get a replacement (warranty rules)
Have brought it back today...but couldn't get a replacement...no devices
tryed all your test and get no errors on screen, electro worked perfecly, keyboard keeps presing same key without leaving the range, and i cant notice any shaking effect.
So probably your screen is faulty , change your device as fast as you can matte
I have brought it already back, but it seems to be that others have all my listed bugs too. take a look at the poll results. On another forum a guy has tested the "painting edge" on 3 devices after he saw my video and all devices have this bug!!!!
Hey Guys,
I have the first 3 bugs on my HD2, too. But with BSB Tweaks 1.31 i solved the first 2 one by activating the option "Screen Sensitivity".
Hi,
If you look in the sticky thread here somewhere in the LEO section about tweaks and registry changes there is a topic on reducing the sensitivity of the screen.
I think what's happening here is the electric current in your fingers is playing havoc with the screen when your fingers are either close to or on the screen.
Let us know if this helps you.
WB
whow, that's a lot of problems for one device.
I have the "non pressed key issue" : (that's annoying as hell, typing a message is a heavy burden now) and the shakey screen. should i bring my handset back or try the tweaks... I didn't expect this from an 600€ handset
wacky.banana said:
Hi,
...
I think what's happening here is the electric current in your fingers is playing havoc with the screen when your fingers are either close to or on the screen.
Let us know if this helps you.
WB
Click to expand...
Click to collapse
When i was made this video my finger was always with the same pressure on the touchscreen. It was not close...and not weak on screen...normal pressure. And you can see at the middle of my second try where i'm drawing lines in notes that the screen suddenly works normal.
I also wrote in my first thread, that this bug is not every second present...but then it's present its also the reason for some other input errors, like the "non pressed key" i think.
Quick question: How much pressure do you apply to the display (what is "normal"?)? Scince your display is reacting weird to pressure on the bottom right corner, any pressure might be linked to erroreous behavior. Do the shaking related errors remain when you don't press at allk?
to the OP: what ROM are you on ? have you tried 1.48 ?
I can recommende you to use screenprotector film and install cab for less sensitive.
But even without this all I had not this problem Looks like your sreen very sensitive for electrocharging and not have normal ground contact. This is way to warranty service.
lmao >.< sorry mate but get a replacement NOW!! I've never got these problems, everything works smooth and properly, sorry about that...
do u have a screen protector? i am wondering if the screen protector does anything bad to it...
You have the exact same problems I had when I first got my device, the main concern was the device having its own mind and making random key presses, even without you touching it or even being near it. I got my unit replaced and the new one works like a charm.
I noticed today that MY PERFECT SCREEN starting acting weird !!!! Its jittering !!! Damnnnn !!!!
I'm totally spooked by your video's!!!
I personally never experienced these bugs so I spend the last half our replicating your bugs.
The only thing I noticed was that Electrocardiography but I think you have your finger too flat on the screen (it has a too large surface area) because when I write on the screen as if my finger where a pencil (straight up instead of flat) the screen is working as it should!
I think you must have a faulty device. Perhaps try to flash it with 1.48 if you haven't done that already.
spaanplaat said:
The only thing I noticed was that Electrocardiography but I think you have your finger too flat on the screen (it has a too large surface area) because when I write on the screen as if my finger where a pencil (straight up instead of flat) the screen is working as it should!
Click to expand...
Click to collapse
On iPhone with exactly the same finger it draws almost a precise straight line. This problem comes directly from HD2's screen, not from fingers, weather, humidity and so on.

Am i the only one with this touch screen problem ?

Sometimes the touch screen is WAY off and only restart is fixing it. Noticed this 2 times already.....
I've noticed this too. I was using the browser, and my screen presses were registering as all sorts of random things (like pressing the middle of the screen would press the zoom button). Restarting the browser seemed to fix it.
Add it to the nexus one issue list.
Postal76 said:
I've noticed this too. I was using the browser, and my screen presses were registering as all sorts of random things (like pressing the middle of the screen would press the zoom button). Restarting the browser seemed to fix it.
Click to expand...
Click to collapse
that's from a lack of multitouch. your hand is probably just barely touching the lower corner of the glass. when you press again in the middle, it registers on the softkeys. it is one of the things I *HATE* about this phone. I always seem to be touching the screen on the very edge. you almost cant use it with just one hand.
I find that I do that with my HTC Magic sometimes as well, the 'webbing' between my thumb and index finger sometimes touches the corner of the screen and brings up the 'app menu' in my left hand, or the 'add widget' menu in my right hand (sense ui). Just another general thing about touch screens and their placement
the four touch buttons arent that accurate. didnt have this problem on the droid. i rarely miss it there but on the nexus is becoming 50/50 chance of it not registering.
Lol how are you guys holding the phone, i always use it one handed and havent expirienced this, i guess everyones different.
bradsh1 said:
that's from a lack of multitouch. your hand is probably just barely touching the lower corner of the glass. when you press again in the middle, it registers on the softkeys. it is one of the things I *HATE* about this phone. I always seem to be touching the screen on the very edge. you almost cant use it with just one hand.
Click to expand...
Click to collapse
This not necessarily a problem with this phone in particular. It is a phenonema that happens on all capacitive touch screens (that do not have multitouch). I work with them all the time (much larger scale) and the slightest touch on a border results in what appear to be calibration issues.
Multi touch takes into account for this, non multitouch does not.
This has happened to me also. Same exact thing, in the browser, the touch was way off, really way off. I was pressing the middle and the zoom button pressed. It was on the table so I know my other hand didn't touch it. It was also vibrating sometimes when I pressed the middle of it. Restarting seems to have fixed it for now.
happened to me in SMS and browser and the only fix was restart the phone.....so its not me accidentally touching the screen in another point.
ps. its so bad that i couldnt even use touch screen to power off the phone. i had to use track ball. (now i know why its there )
I've had this problem as well as other with touch screen. Sometimes I will hit an icon on the main screen and it will jump screens. When I'm in the menu's i hit one of the options and it goes to the one underneath it. I'm CLEARLY hitting the option I want and not the one below so it is infact a hardware problem in my case. I will be in the browser and hit a button and it will exit out of the browser, very annoying! Mine is unlocked but I wrote HTC so lets see what they say.
its a known prob with this phone, ppl are complaining all over Google forum, its very annoying, when it happens it doesn't just happen in the browser, also in text message n home screen ect...
jamesyb0i said:
I find that I do that with my HTC Magic sometimes as well, the 'webbing' between my thumb and index finger sometimes touches the corner of the screen and brings up the 'app menu' in my left hand, or the 'add widget' menu in my right hand (sense ui). Just another general thing about touch screens and their placement
Click to expand...
Click to collapse
Webbed fingers are gross.
I have now experienced this definitively once. It happened while using the dolphin browser. I wiped the screen off, set it on a table, poked with only one finger, and could not for the life of me get the software keyboard to click on the correct button. Just wouldn't happen. Had to restart the phone to fix it. But it's only happened once since I got the thing on launch day.
^ same thing for me. Does the OTA fix this, I have not received it yet. Wish I saw this before I created a thread, sorry.
s15274n said:
^ same thing for me. Does the OTA fix this, I have not received it yet. Wish I saw this before I created a thread, sorry.
Click to expand...
Click to collapse
i dunno, but touches (especially multitouch) seems ALOT more responsive and accurate than before i did the new update... i used dolphin prior and pinch zooming seemed jittery and like the phone didnt want me to do it... now everything seems smooth as butter!
obviously this is only short term though, but hopefully this fix will also address some of the calibration issues (that i also experienced) that the N1 has been known to have...

[Q] Back and Search keys unresponsive

Is anyone else having issues with the back & search keys at the bottom being unresponsive? We have 2x epics and both appear to have this issue.
back button working good here. havent used the search button more than 3 times since i got the phone.
This appears to be a fairly common issue. A lot of people are saying they have issues with different buttons. My home button is the least responsive.
I have to mash the "button" area considerably to get a response - perhaps it waits for a certain amount of capacitive load/change before activating. That would help reduce unwanted taps when swiping across the screen - the Evo was wonderfully sensitive, but an overzealous scroll often had the unintentional side-effect of bringing you back home or backing you out. Also, the Evo, for me, constantly brought up the search dialog if the edge of my hand came too close. So, I suppose it's a tradeoff.
APOLAUF said:
I have to mash the "button" area considerably to get a response - perhaps it waits for a certain amount of capacitive load/change before activating. That would help reduce unwanted taps when swiping across the screen - the Evo was wonderfully sensitive, but an overzealous scroll often had the unintentional side-effect of bringing you back home or backing you out. Also, the Evo, for me, constantly brought up the search dialog if the edge of my hand came too close. So, I suppose it's a tradeoff.
Click to expand...
Click to collapse
This isn't true. My Epic capacitive buttons respond to a very light tap and also a full on *press*.
sounds like non-functioning buttons to me.
You might have a bad sensor on your buttons.
I did have to get used to them. The Evo's were very sensitive, in fact in landscape I'd often accidentally brush one and it was a little annoying.
The epic does seem to need just a half second or so longer for the tap to be recognized.
Aridon said:
You might have a bad sensor on your buttons.
I did have to get used to them. The Evo's were very sensitive, in fact in landscape I'd often accidentally brush one and it was a little annoying.
The epic does seem to need just a half second or so longer for the tap to be recognized.
Click to expand...
Click to collapse
thats more annoying. It makes the phone feel laggy, atleast to me it does. All the my buttons require 2-5 touches before they register
bobdude5 said:
thats more annoying. It makes the phone feel laggy, atleast to me it does. All the my buttons require 2-5 touches before they register
Click to expand...
Click to collapse
I'm not getting that at all. You might want to bring it back and swap it. It takes slightly longer than the evo to register but it feels "about right" to me. When I want to hit it, I have no problem hitting it.
I went to the Sprint store yesterday. The guy told me the early phones had this issue. I asked to try out the one he was giving me. He said, he'll be back and need to take it to the tech for setup and "an update"?...huh, already?
Anyways, he came back and I tried out ALL the buttons. A VERY lite tap and it responds...all of them...
I had a poll going before, and it looked like the issue was relatively wide spread... Apparently though, some phones do not have this problem. If you get this, swap out your phone, it is likely defective.
BTW, the poll is at
http://forum.xda-developers.com/showthread.php?t=772063
I think part of the issue is that the buttons' sensitivity region is slightly below the button icons. If you tap above the buttons, they dont respond. Tap slightly below them, however, and they should respond every time... Unfortunately, this makes most cases for the epic 4g pretty terrible since you cant really press below the menu and search keys... Of course I could be wrong.

Jumpy/Shaky screen while holding finger on my new S8

Hello,
When I scroll down/left/right in my phone and hold my finger on display, the screen automatically shakes left and right or up and down (depending on how I was scrolling my device). This also occurs while charging and while moving an icon on home-screen. I had this issue previously with Asus Zenfone 3, Samsung Galaxy J7 and a HTC Desire (dont remember the exact model though) and a similar issue with iphone 6 (which was registering that my finger was moving on home button). Is this a software problem or hardware problem and how can I fix this ? I have read on web that many people are facing this issue on various phones. but couldnt find any solution yet. Is this my screen sensitivity/touch/display driver/ battery or something else ? If anyone could suggest something, would be really helpful.
Edit: Exactly the same issue as this https://www.youtube.com/watch?v=kxysauxJ5Yk&feature=youtu.be but mine shakes a bit less, still annoys me while playing 8 ball pool and other aiming games like angry birds, etc.
Thanks
There is an app which you can use to test your touch screen by drawing on it. You'll be able to see exactly what it's registering. From what I've seen it happens on a lot of phones with bad digitizers. Try to get a warranty replacement.
LaughingCarrot said:
There is an app which you can use to test your touch screen by drawing on it. You'll be able to see exactly what it's registering. From what I've seen it happens on a lot of phones with bad digitizers. Try to get a warranty replacement.
Click to expand...
Click to collapse
Hello,
Sorry for delay. I went to service centre and they said that it is normal because of smooth and silky touch and slight movement of fingers. I explained him that it occurs more while charging and he had to take my phone for inspection.
Here is the correct video : https://youtu.be/PmQ2lra4RXU
My hand didnt have tremors. I agree that human hands are not 100 % stable, however, none of my other phones do it. And if my hand is shaking, then it should shake also while the phone is not charging. When I unplug my device, it stops shaking (almost stops), but when I replug it, it starts to behave weird again when I am holding finger stable. Also, this shaking will move your aim pointer in gaming and it really is annoying while play games with pointer moving.
Is it really normal that your pointer moves while your finger is stable on screen ?

Categories

Resources