Related
Whenever my phone goes into standby mode, or when I manually put the phone into standby mode by briefly pressing the power button The phone is unresponsive to any other key press or screen taps. I have to press the power button again to get it out of standby mode. I am using a usa T-Mobile MDA with the 1.08 rom. The only today plugins I have installed are magic button, rlcalendar and powercheck. Is there w way to fix this? It is kinda annoying.
take a look here..
start / settings / buttons / the lock tab at the bottom /
there should be three options, if you have the top one checked, then only the power button will wake your phone up.
hope this helps
johnwman said:
Whenever my phone goes into standby mode, or when I manually put the phone into standby mode by briefly pressing the power button The phone is unresponsive to any other key press or screen taps. I have to press the power button again to get it out of standby mode. I am using a usa T-Mobile MDA with the 1.08 rom. The only today plugins I have installed are magic button, rlcalendar and powercheck. Is there w way to fix this? It is kinda annoying.
Click to expand...
Click to collapse
I prefer it like this as it means you don't have to rememebr to 'lock' the phone before putting it in a case/pocket/bag to stop accidental turning on/dialing.
I've asked a similar question in a different thread... but does anyone know how to prevent the buttons from becoming active when the device automatically re-starts itself? e.g. when it's in my pocket, I don't want the keypad suddenly activating when a text message notification appears on the screen. Do I have to lock the keypad manually to do this?
Andre
Thank you Gazzrenn, your suggestion helps greatly!
andrewilley said:
I've asked a similar question in a different thread... but does anyone know how to prevent the buttons from becoming active when the device automatically re-starts itself? e.g. when it's in my pocket, I don't want the keypad suddenly activating when a text message notification appears on the screen. Do I have to lock the keypad manually to do this?
Andre
Click to expand...
Click to collapse
I have security set up that have to enter the password before the device comes on and the buttons become active, so I dont suffer from this. If I dont enter the password, ie when its in my pocket and I dont hear it, it turns off after 1 minute.
I have security set up that have to enter the password before the device comes on
Click to expand...
Click to collapse
Don't you find this a bit tedious if you want to answer a call but have to enter a password first?
I would prefer my device not to activate the screen when its in my pouch or pocket, but to have to activate the keyboard and enter a password to answer a call I find is tedious - or have you found a quicker way to do it.
pewe said:
I have security set up that have to enter the password before the device comes on
Click to expand...
Click to collapse
Don't you find this a bit tedious if you want to answer a call but have to enter a password first?
I would prefer my device not to activate the screen when its in my pouch or pocket, but to have to activate the keyboard and enter a password to answer a call I find is tedious - or have you found a quicker way to do it.
Click to expand...
Click to collapse
Call answer is the one exception.
I have the password setup so that no-one that steals my device can get my data, sure they can hard reset and use the device (not as a phone as that will be blocked from UK networks) but they loose all my private/personal data
Call answer is the one exception.
Click to expand...
Click to collapse
I haven't used the password feature.
If I set a password does that automatically allow the phone to be answered without entering it?
pewe said:
I haven't used the password feature.
If I set a password does that automatically allow the phone to be answered without entering it?
Click to expand...
Click to collapse
Yes - when the phone rings the phone you are able to answer, but once you hang up the password is requested.
I use my 8525 in a side case and when the phone rings I usually pull out the phone to see who's calling to decide if i want to answer... though 9 out of 10 times i accidentally hit the answer button. I always lock my phone via device lock on today screen... is there a reg hack or setting which will allow me to disable or customize ALL the buttons (when in lock mode) on the 8525 so I don't accidentally answer. to me if i were to assign a button (ie power or ptt) to only be allowed to accept a call (when the phone is in lock mode) that'd be great. I'm tired of auto answering and what good does a device lock do if you can easily auto answer?
bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?
abricko said:
bumping this back up... Can I be the only one with this issue? If so how do you use your phone and not auto answer?
Click to expand...
Click to collapse
Sorry you're not getting replies and I have no solution of the type you are looking for sadly. I've tried to replicate what you say happens but it's not easy!!! My key is not that easily pressed and I always put the device back with screen towards my body - my fingers don't seem to get very close to the green button.
This is probably daft to suggest but have you checked the setting that lets you specify auto answer within X number of rings - just in case it's answering the call by itself!!. (apologies if you checked this setting already!!)
Mike
This may do what you want...
http://www.pocketmax.net/smf/index.php?PHPSESSID=da5459e6aadc9c38d5a74b0276782091&board=19.0
Auto Answer is not set... the problem is (and it's a problem with the phone design) when the phone is locked none of the buttons respond until you hit the power button and then unlock the phone via the screen (which is good).
However when there is an incoming call or reminder the screen turns on and then a few buttons are active on the phone (send, end and the two soft keys seem to be). So when a phone call comes in, if the phone is in your pocket or the hip case while reaching for the phone it's VERY easy to accidentally press any of the active buttons and then accidentally accept or reject that call.
I've searched everywhere I can think of and I find little mention of this problem and no mention of a fix, most screen lock replacements only do as much locking as the WM5 built in lock does. The button re-activation after an incoming call is probably something built into the hardware. That's all I can deduce from this.
Thanks for the responses I've received so far.
I am on my fourth PDA phone and have used both Win Mobile 2003 and WM5. They all behaved this way and it is one of my biggest complaints with the Windows OS. I have seen apps for Palm that solve the problem. How hard could it be to have the option to only wake with the press of the power button?!
not hard at all, but the again its M$, i am surprised these devices to have ctrl-alt-del keys.
When my device P3600 received call or sms, the device is powered up, and then all the keys are active. If the device in case some key can be press (by mistake) and activate a program on this situation.
Does any one have a solution for that?
Use the Device Lock Feature in your Today Screen.
I do not like to add one more line to the dotay screen
can I use it without add it to the dotay screen?
If you don't want an additional line on the today screen then the other option is to set the device to request a password after only one minute of inactivity (under "Settings", "Personal", "Lock").
anonimo said:
If you don't want an additional line on the today screen then the other option is to set the device to request a password after only one minute of inactivity (under "Settings", "Personal", "Lock").
Click to expand...
Click to collapse
10x, but this is not help, the lock is form power up the the device, and the device is automitly powered up when received call or sms
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
iMike said:
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
Click to expand...
Click to collapse
in this case you can not aswers a call, when received one - because when the device is lock there is no quick way to answer that call.
or I miss someting here.
Carmi said:
in this case you can not aswers a call, when received one - because when the device is lock there is no quick way to answer that call.
or I miss someting here.
Click to expand...
Click to collapse
Yes you can answer a call, the device lock only lets you use the power, answer, and hangup buttons. When the call is finished it is still locked, unless you unlock it.
I use this one. http://www.mr2-power.com/downloads/DeviceLock.CAB
10x, GREAT, this will do the job
it is work fine - 10x
Carmi said:
10x, but this is not help, the lock is form power up the the device, and the device is automitly powered up when received call or sms
Click to expand...
Click to collapse
I am glad you found a way to solve your problem but I don't understand why my suggestion should not work. If you set your device to request a pin after one minute of inactivity if you receive a message the keys will still be blocked until you enter your pin. (I am talking about device PIN not SIM PIN).
And if you receive a call the answer button works even without entering a PIN.
anonimo said:
I am glad you found a way to solve your problem but I don't understand why my suggestion should not work. If you set your device to request a pin after one minute of inactivity if you receive a message the keys will still be blocked until you enter your pin. (I am talking about device PIN not SIM PIN).
And if you receive a call the answer button works even without entering a PIN.
Click to expand...
Click to collapse
Your solution works too, the only thing is sometimes (for example) I'm sitting on the couch using my phone for email or surfing and watching a TV program. I stop to watch something interesting for 3 minutes and my phone has locked itself with the pin lock. I have to enter the code each time this happens. It can get annoying. If I use devicelock, I lock the keys when I need to, obviously when I'm at home and my phone is on the coffee table, it doesn't need to be locked. I set my device pin lock at 2 hours, that should give the phone enough time to lock itself if I loose it...hopefully.
yeah... but when you loose your phone the device lock doesn´t matter. only reinstall a Rom and your phone can be used.
dersvenni said:
yeah... but when you loose your phone the device lock doesn´t matter. only reinstall a Rom and your phone can be used.
Click to expand...
Click to collapse
Yes, very true, but at least they won't be able to see all my contacts, appointments, notes etc. That being said, I always use FlexWallet to encrypt all sensitive information which is synchronized to my laptop.
touch screen and buttons can be locked during a call?
I followed up this thread and found it very interesting. But it does't focus all the problem:
when call's come in, your solutions are ok.
But when I want to make a call, I found there is a nasty *****, clicking to call waiting or to head speaker on, opening a note or calling my voice box etc. etc.
Then I found that it was my ear or my fingers, clicking on the touch screen or my fingers clicking hardbuttons.
I think tat during a call on the normal speaker the only buttons to be active should be "hang on" and "loud speaker on". With loudspeaker or BT on, or call terminated,s screen and buttons should come back to full function.
Anybody knows a solution to this?
Regards, and keep on, its a great forum. i love it.
iMike said:
I use a program called "device lock" that can be mapped to one of the buttons, I use button one when you hold for a few seconds. The app locks the phone and turns off the screen, so when you recieve a call or sms the screen will turn back on but the phone will still be locked.
Have a search on the forums here for it, that where i got it from.
Cheers
Click to expand...
Click to collapse
Hmm this is just "device lock" that we can see in HTCplugin. In my case it does not turn off the screen. It just locks my device. Is everyone has "turn off the sreen" functionality?
> Karl der Käfer wrote:
>
> touch screen and buttons can be locked during a call?
I lastly tried the on-off button to block screen during outgoing calls.
I never did this before because I thought it would cancel the active call, but it doesn't.
Ok, I see it's more or less doing what I want. But it's very unconfortable. When I hit it bad, or don't hit it at all, or forget to press it?
Isn't there a posibility to have the screnn sensibility off, only sensibility, until the call is either ended, passed to outer speaker, headset or BT? or perhaps simply until I give it free manually?
It would improve safe usage of that phone remarkably, I think.
If not :-( , well, I allways can press the button ;-)
curious for what solutions you'll find on your problems with incoming calls. Perhaps that will give me an Idea.
Chears
I've complained about this on just about every major forum I have found. Hopefully, someone will eventually write an app to allow personalized device locking. I would set my trinity to not wake for ANYTHING and have ONLY the power button active. I would prefer to get audible alerts (or vibrate) to incoming calls, alarms and messages. Pressing power would be the only way to turn the device on. PIN features only annoy me. This would be very useful anytime I am not willing to immediately respond to a notification - driving, having dinner, in a meeting, etc. It could significantly improve battery life. I store mine in my pocket and accidental button press is a problem as well.
hello xda community
i'm very new to the blackstone and this is my first post here. so please bear with me if i'm asking very basic questions here.
my problem:
i carry my blackstone in my pocket all the time. and many people told me throughout the last days that they called me and that i picked up the call by accident.
since i work at customer sites mostly my phone is muted. so people call me and somehow i pickup the calls while the phone is in my pocket.
i always turn of the screen and i have the automatic lock (password protection) enabled. still when the incoming call screen comes up it looks like it is possible that calls are being picked up.
i know there is the slide which has to be moved to the left in order to pickup calls.
i have tried myself by calling my from my home phone and touching the screen and the buttons at random. and indeed the calls are being picked up. i was not able to find out how this is happening ... but it does.
so is there any setting i can change or any additional piece of software i can install to make sure calls are only answered when i want?
possible a reg key i need to change?
any help is very much appreciated
cheers
This isn't just a problem with the Blackstone; every WM phone I have had does this. I have found that a good locking program handles this quie well. I personally like S2U2 by A_C, but there are many others available. You can look in the apps forum, or check the development & hacking forum from the main menu.
The other thing to check is that you have all your notifcations set properly. I set all of mine to vibrate only. Many of them turn on the screen by default. Unfortunately this won't fix the problem on its' own though.
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Is there a way how to disable the CALL PICKUP button which is on the left? so the first of the four buttons?
I think it's because it getting pressed while my phone is in the pocket.
thanks a lot
I use Pocket Shield - it's not free (free to try though) but it's worked well for me
tibor78 said:
mwelch16 ... thank you very much for the reply
i will give it a try and see how it works for me.
so that means first of all i will have to slide that iphone type of lock and then take the call by using the regular slider?
is there any other way (without) an additional piece of software to handle this? cause after all there is the build in slider ... but somehow it's not working as it is supposed to. any enhancement to that?
thanks again
Click to expand...
Click to collapse
No, S2U2 will unlock itself for a phone call and then lock the phone again after the call. So no need to slide to unlock and then answer your phone. It has a bunch of different settings, and yes I believe it locks the hard buttons.
thanks folks for the replies
i found all the settings i was looking for in the S2U2 options. so i'm good right now.
thanks again
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
I've used AE Button Plus to disable the 'Answer' and 'End' hardware keys and re-mapped them to turn wifi and bluetooth off and on. This way there is no chance of hanging up on a call by mistake since you need to use the slide to answer on screen.
Similar but opposite problem
I'm having a problem along the same lines. If I get a call when the phone is in my pocket and answer it on my bluetooth headset, when the call ends the phone then rings someone else, usually the same person who is at the top of my contacts list. Not only is this damned annoying for me, it's getting a bit tedious for the person getting the unwanted calls.
Is there any way to get the phone to immediately lock as soon as a call terminates to prevent this happening? I'm assuming that once the call ends and it returns to the default contact/dial pad screen, the merest brush against the screen will be enough to start a new call.
I'm beginning to think I should have stuck with my iPhone
CreepinJesus said:
You're probably answering the call by pressing the "phone" button (the very left of the four buttons on the bottom). You can either use those buttons to answer/hang up, or the on screen slider.
Click to expand...
Click to collapse
I've the exact same problem, 3/4 of the incoming calls rejected when I get the phone out of my pocket due to End button accidentally pressed.
What did they thought when they implement the slide to answer ????
The purpose of the slide to answer is to avoid such accident, but why the hell did they keep the Answer / End buttons active ????? total non sense to me.
Will check if this AE Button + app can solve this annoying behaviour.
has anyone tried Lockmelite?
It may help - haven't used it myself though.
x 2 for PocketShield. It uses the light sensor in your phone to prevent the touchscreen from activating when the device is inside, say, a pouch, or in your pocket.
I'm using evaluation version 2.6.2.10, which as I understand it, has full functionality, except that every now and then, randomly (and IMO infrequently enough to not be annoying) before unlocking it displays a 10 second message saying that you're using an evaluation version. Note that this *never* happens during an incoming phone call. Good stuff.
Hi,
Try TouchLockPro :
http://forum.xda-developers.com/showthread.php?t=444215
Now it handle light unlock in any cases, that as solved all my issues (pocket, in cas BT,...) and fulfill all my requirements.
BR
Pocket Shield doing perfect job for me
I use AE Buttons Plus to disable the "Answer" & "End" virtual buttons. Then I used iconsoft Phonext to handle all my calling functionalities. When a call comes in, Phonext display a lock screen which you have to slide before it presents you with all the options like answer, decline, silence etc.
This way, I never accidentally pickup a call or dial a number.
I know this question has been asked already but has anybody yet found a way to disable to hardware buttons whilst the phone is locked to prevent accidently answering or rejecting an incoming call whilst removing the HD2 from your pocket or pouch?
I have tried various software, tweaks that i found whilst searching this site but cant get any of them to work
Had my HD2 since Tuesday and love it, just need to find a way to stop answering the phone when taking it out of the pouch!
This is very important thing and I hope someone will find a solution soon.........
hi
there are solutions, pokectshield and s2u
iosu
I too need this, I have tried the ones mentioned but they either dont work or they have their own slide ontop of the HTC slide, so 2 in effect.
Would be nice to have one that just disables the button!
S2u2 and pocket shield did not lock the volume buttons for me so when in pocket they were still pressed annoying me a lot when I listen to my tunes. Pressing any other button was bringing the screen back to lock so in other words no difference at all.
iosub said:
hi
there are solutions, pokectshield and s2u
iosu
Click to expand...
Click to collapse
How is this done with S2U? I installed it and the buttons still worked.
My experience is that if anything the bigger slider caused more chance of it unlocking accidentally, if the phone moves and the screen rubs against your leg. Wasn't an issue with a resistive screen but mine was worse for 'unlocking itself' with S2U. So far it texted a nonsense sms to an ex and rang my mum all by itself - both dangerous!
I always put it in that way yo help protect the screen from being knocked accidentally.
There is a perfectly working solution for this here:
http://forum.xda-developers.com/showthread.php?t=556801
Simple and nice, install and soft reset and never worry about pressing the button while taking your phone out of the cover.
umiss said:
There is a perfectly working solution for this here:
http://forum.xda-developers.com/showthread.php?t=556801
Simple and nice, install and soft reset and never worry about pressing the button while taking your phone out of the cover.
Click to expand...
Click to collapse
That application is for locking the hardward buttons when in a call, not when the phone is locked, or am I missing something?
Cret said:
How is this done with S2U? I installed it and the buttons still worked.
My experience is that if anything the bigger slider caused more chance of it unlocking accidentally, if the phone moves and the screen rubs against your leg. Wasn't an issue with a resistive screen but mine was worse for 'unlocking itself' with S2U. So far it texted a nonsense sms to an ex and rang my mum all by itself - both dangerous!
I always put it in that way yo help protect the screen from being knocked accidentally.
Click to expand...
Click to collapse
I tried S2U2 also and having no problem disabling the call answer and call end buttons when there is incoming call.
johncmolyneux said:
That application is for locking the hardward buttons when in a call, not when the phone is locked, or am I missing something?
Click to expand...
Click to collapse
It's quite the other way around. At least the cab I installed. Hardware buttons work in call, but when the phone is locked and there is an incoming call the buttons are locked (to prevent the accidental pressing).
Hence, not disabling anything you actually would like to use.
EDIT: This is what the description says:
"InCall Lock will temporarily disable Send (aka Talk, Green) and End (aka Red) hardware buttons when you receive an incoming call in order to prevent accidental call pickups/rejects while you are pulling your device out of your pocket. All other hardware buttons are untouched."
So the name can be obfuscating, but as the description says, the yes/no hardware buttons are disabled during an incoming call (prior to answering), but active during the actual call.
chongbh said:
I tried S2U2 also and having no problem disabling the call answer and call end buttons when there is incoming call.
Click to expand...
Click to collapse
This thread is not about disabling buttons when there is an incoming call.
I can't believe there is not solution for this problem yet !
Xeon said:
I can't believe there is not solution for this problem yet !
Click to expand...
Click to collapse
I don't know if I'm misinterpreting the question, but there is a solution for disabling the hardware keys to prevent accidental answer/reject of an incoming call which I've linked to earlier in this thread.
I have that solution installed right now, and when someone is calling I cant answer or reject by pressing the hardware buttons, I have to use the slider on the touch screen.
umiss said:
I don't know if I'm misinterpreting the question, but there is a solution for disabling the hardware keys to prevent accidental answer/reject of an incoming call which I've linked to earlier in this thread.
I have that solution installed right now, and when someone is calling I cant answer or reject by pressing the hardware buttons, I have to use the slider on the touch screen.
Click to expand...
Click to collapse
What I want is to prevent the keypad from waking up the device unless you press the power key.
Cret said:
How is this done with S2U? I installed it and the buttons still worked.
My experience is that if anything the bigger slider caused more chance of it unlocking accidentally, if the phone moves and the screen rubs against your leg. Wasn't an issue with a resistive screen but mine was worse for 'unlocking itself' with S2U. So far it texted a nonsense sms to an ex and rang my mum all by itself - both dangerous!
I always put it in that way yo help protect the screen from being knocked accidentally.
Click to expand...
Click to collapse
chongbh said:
I tried S2U2 also and having no problem disabling the call answer and call end buttons when there is incoming call.
Click to expand...
Click to collapse
umiss said:
I don't know if I'm misinterpreting the question, but there is a solution for disabling the hardware keys to prevent accidental answer/reject of an incoming call which I've linked to earlier in this thread.
I have that solution installed right now, and when someone is calling I cant answer or reject by pressing the hardware buttons, I have to use the slider on the touch screen.
Click to expand...
Click to collapse
No one here wants buttons to be disabled when call is incoming. We just want buttons to be disabled when you put device in to sleep.
Go on test it. Put music on in music tab or WM player or any other with your headphones or without. Press red button to put device in to sleep mode (use manual lock if you have disabled auto lock). Press volume buttons and see what happens.
If you have s2u2 or pocket shield or nothing effect is the same.
ruscik said:
No one here wants buttons to be disabled when call is incoming. We just want buttons to be disabled when you put device in to sleep.
Go on test it. Put music on in music tab or WM player or any other with your headphones or without. Press red button to put device in to sleep mode (use manual lock if you have disabled auto lock). Press volume buttons and see what happens.
If you have s2u2 or pocket shield or nothing effect is the same.
Click to expand...
Click to collapse
I'm sorry but I can't agree with you. The thread clearly states in the first post
"has anybody yet found a way to disable to hardware buttons whilst the phone is locked to prevent accidently answering or rejecting an incoming call whilst removing the HD2 from your pocket or pouch?"
The answer to this is yes, and I've linked to the solution previously.
ruscik said:
No one here wants buttons to be disabled when call is incoming.
Click to expand...
Click to collapse
Sorry buddy but you're quite wrong. That's EXACTLY what I want and apologies if I wasn't crystal clear in describing it - I may not have been since I also want the same as you.
Umiss - I'm going to go and check out that cab you mentioned because if that really works then brilliant!!!!
Cret said:
Sorry buddy but you're quite wrong. That's EXACTLY what I want and apologies if I wasn't crystal clear in describing it - I may not have been since I also want the same as you.
Umiss - I'm going to go and check out that cab you mentioned because if that really works then brilliant!!!!
Click to expand...
Click to collapse
so how do you want to answer a call with this cab installed and enabled?
i also would like to prevent unwanted presses....but i do want to reject or accept a call on some way, without mispressing a button.
When a call comes in the screen is enabled so I just slide to answer or reject. It won't happen by accident in all likeliness, and removes the huge annoyance of the hardware buttons being accidentally pressed. It's the one thing that majorly pisses me off about this awesome phone.
If they wanted to, they could simply do a cab file that disables them perhaps when the proximity sensor detects the face of the phone is against something. That would be good too, unless I'm not considering some factor.
Hmmm, I've just installed that app and it seems to only partly work.
The reject call button locks perfectly but the answer button does not lock so it can still be pressed. I also managed to press the home button and get to the Sense screen once, but when I tried this a second time it didn't do it, so I think it might be a bit buggy.
A definite step in the right direction though, at least I now have fewer buttons that can be pressed accidentally!