Hi,
I have been using iGo 2006 Plus for a couple of weeks now and keep noticing a weird problem. Every now and again, at some point the screen orientation will go haywire, and the touchscreen will revert to the default (upside down landscape on athena) but the screen will stay the same. I.e. to click the bottom right of the screen I have to tap the top left part of the screen. Anyone else have this issue? It's very weird! At first I thought the device was freezing as I was pressing buttons and nothing was happening, but then I realised the touchscreen and the display had fallen out with each other!
findus said:
Hi,
I have been using iGo 2006 Plus for a couple of weeks now and keep noticing a weird problem. Every now and again, at some point the screen orientation will go haywire, and the touchscreen will revert to the default (upside down landscape on athena) but the screen will stay the same. I.e. to click the bottom right of the screen I have to tap the top left part of the screen. Anyone else have this issue? It's very weird! At first I thought the device was freezing as I was pressing buttons and nothing was happening, but then I realised the touchscreen and the display had fallen out with each other!
Click to expand...
Click to collapse
Yep - I've had exactly the same problem - it usually happens when you 'minimise' i-Go to use your PPC and then try to 'maximise' again. The only way around it that I've found is to close i-Go to use PPC and then re-start it again.
Thanks for the reply, I'm gutted it isn't just me - was hoping I'd found a perfect TomTom 6 replacement! Oh well, it's still better than TT6. If anyone knows of a fix, please let us know!
Best replacement I've found is the new and improved 2007 re-packaged iGo software known as MioMap v3.2. Very similar GUI but much improved functionality wise over iGo and it has Speed camera software to boot as well as giving directions (voice guidance) with Miles as opposed to only giving Voice guidance in Kilometers option.
It's got everything iGo has and is built on its platform...it just works better and is far more stable IMHO. Still evaluating it and have no issues as yet. I too had experienced the fore mentioned issue of screen rotation in iGo My Way.
I'm glad I made the switch.
I agree miomap 3.2 seems more stable.
I havnt found a minimize option on it yet,but i only just installed and messed with a few options.
Smartstradamus said:
I agree miomap 3.2 seems more stable.
I havnt found a minimize option on it yet,but i only just installed and messed with a few options.
Click to expand...
Click to collapse
Wait till you take her out for a spin! This app really rocks!! Just wish the GUI was as crisp as on iGo, which truly looked VGA all the way, whereas MioMaps options menu looks more like stretched QVGA
But don't worry peeps, the maps and cockpit look every bit as good as iGo's.
I changed the skin for mio map and found the minimize button,and the UI has improved dramtically.
I used the quicksilver skin from a IGO/MIO fanpage.
mackaby007 said:
Wait till you take her out for a spin! This app really rocks!! Just wish the GUI was as crisp as on iGo, which truly looked VGA all the way, whereas MioMaps options menu looks more like stretched QVGA
But don't worry peeps, the maps and cockpit look every bit as good as iGo's.
Click to expand...
Click to collapse
Mackaby - thinking about making the switch, any torrents available for miomap? (so I can give it a try).
apphoen said:
Mackaby - thinking about making the switch, any torrents available for miomap? (so I can give it a try).
Click to expand...
Click to collapse
I've PM'd you.
Smartstradamus said:
I changed the skin for mio map and found the minimize button,and the UI has improved dramtically.
I used the quicksilver skin from a IGO/MIO fanpage.
Click to expand...
Click to collapse
Now that sounds cool.
How did you do it? Mind sharing? PM me if you prefer.
Smartstradamus said:
I changed the skin for mio map and found the minimize button,and the UI has improved dramtically.
I used the quicksilver skin from a IGO/MIO fanpage.
Click to expand...
Click to collapse
Nevermind Smartstradamus. I googled for it and found it/ Thanks for the heads up, great little site for this app. Here's the link for all to share:
http://blogger.xs4all.nl/rubenb/
mackaby007 said:
Nevermind Smartstradamus. I googled for it and found it/ Thanks for the heads up, great little site for this app. Here's the link for all to share:
http://blogger.xs4all.nl/rubenb/
Click to expand...
Click to collapse
the link isnt opening for me, any ideas, id love to try this as an alternative
johnwalk said:
the link isnt opening for me, any ideas, id love to try this as an alternative
Click to expand...
Click to collapse
Hi johnwalk. Don't know why the link is not working for you. I just tried the link via your quotation of my post and it works perfectly for me using Internet Explorer and Firefox on the PC.....
Just tried through PIE & Opera on the Ameo and no problem there either. Must be some settings in your browser.
sorry i didnt get back to you regarding the skin site(I was at work).
Ive just used mio to navigate home from work and it seems there are still some probs.
1: If I recieve a notification whilst using mio the notification appears in portrait and when i exit mio the screen stays in portrait.(I get the same prob when using igo with wisbar advance active)
2: The gps position on screen cannot keep up even at 30mph.
3: It occasionally doesnt show me the correct position on the map.
4: It occasionally loses gps for a few seconds.
Mackaby! Did you check out the few tweaks they have for the sys.txt on that blogger.xs4all site?
Fair observations of MioMaps shortcomings, but....
Smartstradamus said:
sorry i didnt get back to you regarding the skin site(I was at work).
Ive just used mio to navigate home from work and it seems there are still some probs.
1: If I recieve a notification whilst using mio the notification appears in portrait and when i exit mio the screen stays in portrait.(I get the same prob when using igo with wisbar advance active)
2: The gps position on screen cannot keep up even at 30mph.
3: It occasionally doesnt show me the correct position on the map.
4: It occasionally loses gps for a few seconds.
Mackaby! Did you check out the few tweaks they have for the sys.txt on that blogger.xs4all site?
Click to expand...
Click to collapse
Hi again. Yes I've experienced all of the same things you described, but am not majorly put off by it.
To be honest I don't want to read any txt whilst driving, but you make some fair points. As for the occasional loss of signal, I had these issues with TomTom 5 & 6, but not often, but when it happened with TomTom, it really screwed me up. With iGo & MioMap signal re-acquisition is far quicker and hasn't caused me any major gripes as yet, but it is early days.
Yeah I did a few alterations to the sys.txt as instructed, but only to reveal 1 way streets. I didn't want to make too many changes all at once without seeing the initial ones.
Great site though. Thanks.
To be honest, I'm looking forward to the new version of iGo in all its glorious 3D rendering of streets and buildings.
P.S. 2: The gps position on screen cannot keep up even at 30mph. I haven't experienced this yet.
Related
Hi, I have got TomTom Navigator 5.1 working almost perfectly, but does anybody else find that when the screen is rotated horizontally, the screen update rate becomes very slow, and the new frames take a long time to draw. In vertical mode it's perfectly animated!
ive noticed it, its like a 50% transparent wipe closly followed by the 100% opaque menu page.
pain, but a TTN update for wm5 enhancements would be appreciated, IF THEY ARE READING THIS!!!! :!:
Carnivor said:
ive noticed it, its like a 50% transparent wipe closly followed by the 100% opaque menu page.
Click to expand...
Click to collapse
Yes, that's exactly how I see it too. Vertical works beautifully though. I have already requested this update to TT and suggest anyone here does the same.
It does this because it doesn't use WM5's built in rotation. It calculates the pixel rotation on the fly.
This is because of TomTom's quest for hardware independance.
Never going to be fixed I'm afraid.
rilot said:
Never going to be fixed I'm afraid.
Click to expand...
Click to collapse
Are you saying it does this on all Pocket PCs?
You seem very definate that TT won't fix it. Do you work for them? Never say never!
Because it's been this way since they started supporting rotation. It's especially slow on VGA devices such as the JASJAR and X50V.
Why would TomTom put the investment in to support a function only a tiny proportion of their target markets wants or even sees as a problem? They are more interested in the Go set of products now anyway.
If you have a look at the pocketgps forums you will see that therre are a lot more serious bugs in TomTom 5.1 that they are unwilling to fix.
CJSnet said:
In vertical mode it's perfectly animated!
Click to expand...
Click to collapse
Hmm, maybe I'm a little bit spoiled because my former phone (Magician) animated TomTom 5.21 absolutely smooth (>15fps or so).
On my Universal, the refresh rate in either horizontal or vertical mode is quite unacceptable because it seems that the screen is only being refreshed once per second (or worse), even with disabled POI's.
Okay, the map looks really great on the Universal's VGA-screen but I would rather prefer a somewhat smooth navigation :?
Am I doing something wrong here?
.ox
Have you tried diabling the display of POIs? I find that screen refresh is fine unless I'm trying to show the POIs - you can still be warned when approaching (e.g. speed cams) as it will flash up and show you. Not perfect but a good compromise?
oxident said:
CJSnet said:
In vertical mode it's perfectly animated!
Click to expand...
Click to collapse
Hmm, maybe I'm a little bit spoiled because my former phone (Magician) animated TomTom 5.21 absolutely smooth (>15fps or so).
On my Universal, the refresh rate in either horizontal or vertical mode is quite unacceptable because it seems that the screen is only being refreshed once per second (or worse), even with disabled POI's.
Okay, the map looks really great on the Universal's VGA-screen but I would rather prefer a somewhat smooth navigation :?
Am I doing something wrong here?
.ox
Click to expand...
Click to collapse
Well nothing wrong, but your Universal has 4 times the number of pixels. It will be slower of course.
hi, iam using tt5.21 on my universal and it works great in both positions.though, i havent used it other devicesso so have no comparison. can you tell me how to check how many frames per secon i have?
chees, cudo
cudo said:
hi, iam using tt5.21 on my universal and it works great in both positions.though, i havent used it other devicesso so have no comparison. can you tell me how to check how many frames per secon i have?
Click to expand...
Click to collapse
I don't think, TT can display the frame rate ... the values in my previous post are just guessed.
You say, it works great on your Universal - can you guess how often the screen is refreshed when you are driving? I mean, does it look like it's refreshed once a second or is it "absolutely" smooth?
.ox
hi, it works, in my opinion, smooth..i cannot see any refreshes or lags.
cheers, cudo
TomTom 5.21 on my Uni is perfect in landscape mode,refreshing 3-4 times a second at a rough estimate.
Refreshes about the same in either screen orientation.
TomTom 5.21 on my Uni is perfect in landscape mode,refreshing 3-4 times a second at a rough estimate.
Refreshes about the same in either screen orientation.
has anybody come across a one button close all application for WM5.0? Spb 3.0.1 is too slow on WM5 and Wisbar Advance 2.4.....is also too much for what is needed. Something like Magicbutton but written for WM5.0 would br nice, nothing that requires much memory, but something that enables the closing of running apps without having to go into start/settings/system/memory...etc.
Wouldn't it be nice if Microsoft had just written in that piece of code, as they are well aware that since PPC2000, that every application opened, remains so unless you manually close it down in memory (therefore hogging memory resources!) :evil:
Well if anyone knows of a WM specific solution, please do share.
mackaby007 said:
has anybody come across a one button close all application for WM5.0? Spb 3.0.1 is too slow on WM5 and Wisbar Advance 2.4.....is also too much for what is needed. Something like Magicbutton but written for WM5.0 would br nice, nothing that requires much memory, but something that enables the closing of running apps without having to go into start/settings/system/memory...etc.
Wouldn't it be nice if Microsoft had just written in that piece of code, as they are well aware that since PPC2000, that every application opened, remains so unless you manually close it down in memory (therefore hogging memory resources!) :evil:
Well if anyone knows of a WM specific solution, please do share.
Click to expand...
Click to collapse
I added couple files which they are usefull for you and they include the closeall app.
Install the cab files you'll see the close all, Reset and Running programs, which they can be clicked from the systray directly, after the installation they require a soft reset or else you go to Start>Programs>System open TrayLaunch and press Enable
GSPocketMagic++ is the most stable program I've tried. You need to put some amended bitmaps in to get it to integrate with WM5 but it works well...
http://www.pocketpcfreewares.com/en/index.php?soft=1276
Thanks guys. I'll try them both and let you know how I get on.
Damn!! My Jasjar is a Rocket!!
sub69 said:
GSPocketMagic++ is the most stable program I've tried. You need to put some amended bitmaps in to get it to integrate with WM5 but it works well...
http://www.pocketpcfreewares.com/en/index.php?soft=1276
Click to expand...
Click to collapse
sub69: I don't know what kind of coding they used in that software you recommended, but it has boosted refresh rates and performance in general by at least 30%!! I know this sounds crazy but it's true! My opinion has completely changed about the speed of the Jasjar. It seriously Rocks! I couldn't care less if it doesn't stay this way, because it shows me conclusively, that future ROMs' will probably address the issues I have had thus far.
I needed this. Thanks a bunch sub69; best link I've had with regards to Universal software.
OK 1 gripe only: I've lost my two soft buttons on the bottom bar (any ideas?). It comes back and stays operational after a soft reset, but as soon as I use the 'close all' option of the program, I loose the soft keys! Damn..there's always a hitch!
Another positive though, the speed boost remains even after I have exited the program and revert to standard WM5.0 launcher!
P.S. I had at least 12 programs running simultaneously with no slow downs at all and 15 megs of Memory still available (tried to run out of memory, But couldn't). Very pleased at the moment, this is what I was expecting from the HTC Universal!! I'll test extensively before I comment further.
Thanks again sub69, u da Man!!
Mental...I didn't realise it was that good!?!
Not sure about the soft buttons, although come to think of it I have noticed they've disappeared a couple of times. Must've been when I hit "Close All" too?
Glad I could help, anyway. Do let us know how things go...
Re:getting better all the time!!
sub69 said:
Mental...I didn't realise it was that good!?!
Not sure about the soft buttons, although come to think of it I have noticed they've disappeared a couple of times. Must've been when I hit "Close All" too?
Glad I could help, anyway. Do let us know how things go...
Click to expand...
Click to collapse
Still cannot believe it!! It's still going strong. Sussed the soft button thingy:Under start (GSPocket)/options/settings...uncheck the 2 tabs for'use exten task close' & 'Use Today skin'. That's it. It runs absolutely perfectly for me & with no need for amended bitmaps too! It fits right in wih my red or blue border themes (I only use my own jpegs now instead of themes - in the hope that I get no performance issues.....so far so good). Under menu settind tab I only select close all & setting (which gives me quick access to all settings in WM5.0..personal & system) and under 'click' tab I leave it as default 'Menu'. I'm so impressed with this software, I didn't think non-specific WM5 software coul be this good!
That site you recommended is also tops!
This software is so good that I must put up a new thread to inform all of your wonder find. I just hope all who try it get the same experience I'm getting. Thanks again sub69....I don't even feel the need for the next ROM update/grade...though I won't be turning it away.
Hmmm, not sure why you're that stunned. I'm finding it just fine - but certainly no faster than my JJ runs under PocketPlus 3.01, and the non-VGA graphics are a real step backwards. Anyone know how to solve this?
You mention a speed improvement; can you clarify: Before this, how long did it take to rotate the screen, and how long does it take now?
MagicButton (mbutton) works with batterymeter
Hi All,
I installed MagicButton (freeware) om my K-Jam. It works so far!
Cheers,
CookieM
pocketpcfreewares.com is great! They do an RSSfeed showing all new and updated software, too, so its a permanent fixture as a "Live Bookmark" on my Firefox bookmarks toolbar.
I must fiddle with some .bmp's for GSPocketMagic++...
Can someone tell me how to install this? In laymans terms
It's simpler than you think
trapper said:
Can someone tell me how to install this? In laymans terms
Click to expand...
Click to collapse
Carnivor said:
CJSnet said:
Which CAB file do I install?
Click to expand...
Click to collapse
GSPMagic.xscaleE.CAB for english on JJ
Sub69, nice start button, now the flawless look sets it off
Click to expand...
Click to collapse
That's the file you need to download for the Jasjar, then if you have an SD card reader, you can transfer it directly to it and install the .cab file by selecting it! If you don't have a card reader, let's hope you have a bluetooth dongle, as it's a small file then you can bluetooth it over. However if you have no problems with your activesync connection, just use that to dump the .cab file on your storage card somewhere or into 'My Documents' on the jasjar.
It's not complicated.
Read the posts craigiecraigie4!
craigiecraigie4 said:
Hmmm, not sure why you're that stunned. I'm finding it just fine - but certainly no faster than my JJ runs under PocketPlus 3.01, and the non-VGA graphics are a real step backwards. Anyone know how to solve this?
You mention a speed improvement; can you clarify: Before this, how long did it take to rotate the screen, and how long does it take now?
Click to expand...
Click to collapse
craigiecraigie4 said:
I can confirm that this programme is small and perfectly funcitonal for closing apps. If you're battling with PocketPlus for some reason, then this is definitely the way to go.
Click to expand...
Click to collapse
mackaby007 said:
For anyone like sub69 who have experienced relatively few problems with their universal, you might not notice any difference, but for anyone who is still suffering performance issues
Click to expand...
Click to collapse
Read the following thread and you'll see that I had performance issues with my jasjar, hence these posts:
Link:
http://forum.xda-developers.com/viewtopic.php?t=30443
ramram said:
I added couple files which they are usefull for you and they include the closeall app.
Install the cab files you'll see the close all, Reset and Running programs, which they can be clicked from the systray directly, after the installation they require a soft reset or else you go to Start>Programs>System open TrayLaunch and press Enable
Click to expand...
Click to collapse
Good App ! made my day, very useful and simple
Cheers
hrb
Yep, using it myself now - but no speed change over PocketPlus (even after hard reset to remove PP). Using it cos I like menu and PP didn;t offer all that much more that other apps don;t give me.
An OEM version of the new HTC album (extracted from the Touch dual) has been published on the thread below (post #3).
By the sounds of it they haven't got it working, but there is certainly some interest.
http://forum.xda-developers.com/showthread.php?t=339587
that's good, but it doesn't work.
Yeah, it didn't work for me, either, on my TyTN II. But I'd love to have it. It's the only thing I feel is missing from my device (the built-in one is kludgey to use).
They have got it to work, but only in a cooked rom. I hope someone can build this into a cab!!!
what is this for? any screenshots?
I saw a .cab for this one around some forums working for the wizard. does it work for the prophet? is it the same you have gollum?
Working fine for me on my Touch.
http://4pda.ru/forum/index.php?showtopic=44159&view=findpost&p=1123125
Seed123 said:
Working fine for me on my Touch.
http://4pda.ru/forum/index.php?showtopic=44159&view=findpost&p=1123125
Click to expand...
Click to collapse
You're the best!! I installed the mui 0419 version on my Mogul, and it works fine. Nice App.
Is the other version a different language?
steb0ne said:
You're the best!! I installed the mui 0419 version on my Mogul, and it works fine. Nice App.
Is the other version a different language?
Click to expand...
Click to collapse
doesnt work on my (beloved) wizard
it cant start up, i just click on the exe file after the instalation then there is the waiting cursor for like 3 seconds and after that...well nothing
Both versions work on my TyTN II... kinda.
The flick-advance and finger-rotate work most of the time, but the program refuses to do the circle-zoom, putting up a little "No zoom!" icon (for a picture that's not zoomed in to 100%).
Sometimes the program gets stuck in a mode where trying to move the picture just makes it bounce off the edges of the screen. And a little box, much like the zoom rectangle in the native Pictures & Videos application, only empty, appears in the corner. At this point, it's difficult to know what to do with the program, since it's taken over the screen.
So it's neat, but as something I'd start in order to show people my pictures, I give it a miss. There's nothing worse than showing people your flash gear only to end up fighting with it and apologising instead.
Seems to work fine. But when I enter the settings dialog, I can't seem to do anything there. But who cares? I don't need any settings. Circle zooming and rotating works for me. Nice piece of software.
juvs made a cab, and it works fine
Anyone getting an orientation problem? mine seems to start up in landscape mode?
antnee said:
Anyone getting an orientation problem? mine seems to start up in landscape mode?
Click to expand...
Click to collapse
It's supposed to start in landscape mode (I think), same way as the camera view.
hamishmacdonald said:
Both versions work on my TyTN II... kinda.
The flick-advance and finger-rotate work most of the time, but the program refuses to do the circle-zoom, putting up a little "No zoom!" icon (for a picture that's not zoomed in to 100%).
Sometimes the program gets stuck in a mode where trying to move the picture just makes it bounce off the edges of the screen. And a little box, much like the zoom rectangle in the native Pictures & Videos application, only empty, appears in the corner. At this point, it's difficult to know what to do with the program, since it's taken over the screen.
So it's neat, but as something I'd start in order to show people my pictures, I give it a miss. There's nothing worse than showing people your flash gear only to end up fighting with it and apologising instead.
Click to expand...
Click to collapse
Everything you have described above is 100% intended behavior for this app.
Circle Zoom: Try going in the opposite direction you tried. Amazing. (Clockwise : zoom in. Counter-Clockwise: zoom out.)
Little Box Top Left: This mode is entered by hold your finger down in the app for around 1 second. At this point you can pan the picture by dragging. You have to stop touching the screen until the little white box goes away to get back to the mode where you can flick-scroll. This mode is really only useful when you're zoomed in; the little white box gives you a reference to which part of the picture you are currently zoomed in to.
This app works great.
Right, and half circle left rotates it one way and half circle right rotates it the other, works great on my mogul, HTC Album for the win!
tomazez said:
doesnt work on my (beloved) wizard
it cant start up, i just click on the exe file after the instalation then there is the waiting cursor for like 3 seconds and after that...well nothing
Click to expand...
Click to collapse
same here.... doesn't work for my prophet (mysterious). besides, it also seriously slowed my system [email protected][email protected]"
I am also having problems with Juv's version (posted earlier in this thread) on my Touch. Starts landscape, cant see menu and controls bounce between pictures.
There is another cabed version 3 posts down that works alot better for me. You might try it if you are having issues with the first Juv version!!
cheers
paranoid2007 said:
Seems to work fine. But when I enter the settings dialog, I can't seem to do anything there. But who cares? I don't need any settings. Circle zooming and rotating works for me. Nice piece of software.
Click to expand...
Click to collapse
Look for files that have 04 in the name on your mobile device. Read the other 2 digit 04xx. Copy HTCAlbum.exe.0409.mui in \Windows dir on the mobile device into a new files called HTCAlbum.exe.04xx.mui. Now u can see menu in english.
Thanks to Itje 4 explanation of country code in MUI.
Work like a charm with just one minor bug on my Kaiser; when the keyboard is slid out the picture is up-side-down. But that's like that with many apps that were ported from other roms. Hell, even for some of the applications with the stock rom.
Still I like it, make my TyTN II a litte better again.
Cheers,
Cacti
app deleted because it was messed up!!!
gr8 app man, this will save we me some time
thanks
what kind of calibration needed in the diamond??
roisagi said:
what kind of calibration needed in the diamond??
Click to expand...
Click to collapse
the screen alignment is done automaticaly by this app... so you dont have to do it manualy
I checked the registry to compare the defaults in the CAB with what I already had.
The CAB had
485,500 785,175 785,825 185,820 188,175
my TP has
485,514 785,835 785,200 193,200 193,835
Now how perfect mine are, I don't know, but I tried to be as perfect as possible. Even tried multiple times until I was happy I hit the center of the cross 5 times in a row.
I installed the .CAB on my Diamond and it inverted the screen taps; everything on the screen appears fine but the tap responses were inverted, I think its a glitch...Just reporting, hope it gets fixed.
I'm not getting how this works... I mean, copied on my Diamond, installed (tried both in Internal Storage and Phone Memory), I get a setup icon in the program menu which, tapped, leads me to another autoalign installation, and so on. Cycle.
What am I missing? Any help? Would really like to try this software and see if it improves my touch experience (not a reference to some mythical UI for WM... ).
teorouge said:
I'm not getting how this works... I mean, copied on my Diamond, installed (tried both in Internal Storage and Phone Memory), I get a setup icon in the program menu which, tapped, leads me to another autoalign installation, and so on. Cycle.
What am I missing? Any help? Would really like to try this software and see if it improves my touch experience (not a reference to some mythical UI for WM... ).
Click to expand...
Click to collapse
Try aligning your screen by hand and mess it up on purpose. Then try it with autoalign and see the difference.
P.S TouchXperience IS NOT some mythical UI! Just watch. It'll be released on Feb 1st.
azharsunny said:
WORKS ONLY ON VGA DEVICES
Click to expand...
Click to collapse
Any ETA when this will work on WVGA?
CR0WN13 said:
I installed the .CAB on my Diamond and it inverted the screen taps; everything on the screen appears fine but the tap responses were inverted, I think its a glitch...Just reporting, hope it gets fixed.
Click to expand...
Click to collapse
CUD YOU EXPLAIN WHAT U MEAN BY " SCREEN TAPS INVERTED"?
so i can fix what the problum might be!!
teorouge said:
I'm not getting how this works... I mean, copied on my Diamond, installed (tried both in Internal Storage and Phone Memory), I get a setup icon in the program menu which, tapped, leads me to another autoalign installation, and so on. Cycle.
What am I missing? Any help? Would really like to try this software and see if it improves my touch experience (not a reference to some mythical UI for WM... ).
Click to expand...
Click to collapse
the file in the program is the real deal.... when u instal that cab, the one in your program menu, that aligns the screen !!!
this is jus my second cab and ill try to make an easier version soon!!
Internet browse fu**ed up!!! Made multipul posts
Internet browse fu**ed up!!! Made multipul posts
AllTheWay said:
Any ETA when this will work on WVGA?
Click to expand...
Click to collapse
if u cud help with the info i need then i can make one for WVGA as well
Thanks azharsunny, I thought it had to be like that but wasn't sure!
Kraize said:
P.S TouchXperience IS NOT some mythical UI! Just watch. It'll be released on Feb 1st.
Click to expand...
Click to collapse
Didn't really mean to upset anyone! It's just that I'm reading about its features since the beginning of my WM life (Sept. 08) and I'm trying it as soon as it is released to the public. Looks very promising and interesting!
Good idea, will give it a try
Thanks for sharing
This app is just brilliant! Timesaving and incredibly useful, now finger touch is at a new level! Thank you so much, that should be included in any Diamond ROM!
sorry for my supid question, but whats exactly the sense of this app? and why does it save time and give new experiences?
What's wrong with the built in screen alignment? Seems to work okay, what makes this different??
the app is still not final!!! im workin on it as a write this !!!
THIS THREAD HAS BEEN MOVED.
http://forum.xda-developers.com/showthread.php?t=515838
Here you can find Mirrors for the latest releases:
VGA: http://www.megaupload.com/?d=0J1GZCWF
WVGA: http://www.megaupload.com/?d=XAD6PFUU
I will use this on a later day
This one would be nice as well
i've been following the development for a while, is there a link?
*edit* nevermind, spoke too soon! THANKS!
*second edit* just thought i'd point a few things out now that i've tried it (on my AT&T Fuze)
the audio seems a bit sluggish, and pressing the back key cycles through the previous "unloaded, loaded, half cocked" screens. it appears to cycle through every screen since the app was loaded. the only way i've figured out how to exit is by pressing it until the menu is back up.
Please make it compitable with the Omnia aswell.
Mr. Nick said:
It works on my Touch HD.
Click to expand...
Click to collapse
How? It doesn't on mine. I see graphics (VGA only), but no sound, no sensor trigger, no nothing. I can simply charge and discharge the shotgun with gestures (no sound), and that's all. Also instructions button doesn't work.
EDIT: You have hardcoded "Program Files" inside app, that's why. I have a localized rom, so no "program files". Anyway, also creating the right folder, still no sensor trigger, only gestures. No animations. It's almost worst than the others virtual shotguns floating around. A big disappointment. Uninstalled.
Thanks for the app but not working great on my Diamond.
The 'instructions' button does not seem to work and I can't really tell if the g-sensor is doing anything. It also generates an ever-increasing number of entires in the task list when it is used.
Uninstall seems to work well. Look forward to seeing later versions.
I will fix the many forms problem now and update it....
also... the instructions have not yet been made... they are coming soon...
so please tell me... is the g sensor working on the diamond?
Mr. Nick said:
I will fix the many forms problem now and update it....
also... the instructions have not yet been made... they are coming soon...
so please tell me... is the g sensor working on the diamond?
Click to expand...
Click to collapse
That explains the lack of instructions!
What is the g-sensor meant to do?
bbonzz said:
How? It doesn't on mine. I see graphics (VGA only), but no sound, no sensor trigger, no nothing. I can simply charge and discharge the shotgun with gestures (no sound), and that's all. Also instructions button doesn't work.
EDIT: You have hardcoded "Program Files" inside app, that's why. I have a localized rom, so no "program files". Anyway, also creating the right folder, still no sensor trigger, only gestures. No animations. It's almost worst than the others virtual shotguns floating around. A big disappointment. Uninstalled.
Click to expand...
Click to collapse
Well I was not planning to release it today.... ok... the animations will be done soon maybe later today or tomorrow.... please be grateful that i am doing this... thank you.
Shotgun V2 Released...
See the changelog on the first post.
not working perfectly on Diamond..
you need to shake your phone for about 10 seconds just to half-load it.. the app is also slow to launch..
appreciate the app sir..
nohctis said:
not working perfectly on Diamond..
you need to shake your phone for about 10 seconds just to half-load it.. the app is also slow to launch..
appreciate the app sir..
Click to expand...
Click to collapse
Thank you sir... i will update the sensitivity soon
Thank you for the input.
I have still proles with the versuon V2 :How? It doesn't on mine. no sound, no sensor trigger. I can simply charge and discharge the shotgun with my toucg screen (no sound), and that's all. Also instructions button doesn't work. and when you lanch the progamme there is no icon for it. i use a htc duobd now. i hope there is a now versuion soon.
strange how there is no sound.... is your volume up????????????????????????????????????????????
check your program files folder.....
see if the sound files are in there...
yeah, there is no sound file in the cab, i use version V2 on mij diamond, can you make this app better for the diamond ?
in my Diamond, it do have a sound.. i'm currently using uDK's 6.5 rom..
waiting for version 3 with the fix for sensitivity issue and animation..
It doesn't work on my Diamond either... No sounds, no G-sensor, no animations...
I really appreciate the time you spend in developing this application!
Hi !
is it possible to get any screenshot please ?