Does anyone know how to load the t-mobile ROM onto an O2 XDA EXEC.
I downloaded the T-Mobile rom, but because it's an O2 device doesnt recognise it.
Thanks in advance
Extract the T-Mobile-ROM, until you have a nk.nbf file.
Extract the attached file and put it into this folder and overwrite everthing. Now start RomUpgradeUt.exe
T-mobile rom
How do I extract the T-mobile rom from the program download from T-mobile.
thanks
HAve extracted files but tells me the rom image is not design for my device, country id error..
Any ideas
Related
Could you guide me to where is new ROM ROM: 4.01.00 ENG
Radio: 6.24.01, 900/1800, it is new for XDA1?
Thanks
The 4.01.00 ENG version is here ftp://tmobile:[email protected]:21 .. but be careful as it contains the upgrade for RSU and I 'm not sure it supports 900/1800 or not since it's TMO upgrade.
If your device has no Radio problems (GSM), my advice would be to down load the file, use Winzip or WinRAR to extract the NK.nbf file which the ROM upgrade, put it on SD card and flash your XDA using the bootloader.
PS: if you are sure that your network is 1800 MHz then do NOT use R6.24 for RSU upgrade.
Good luck
Many thanks Sir
I am in Cambodia. There are two network 900 and 1800Mhz, I am using 900 Mhz, my ROM id 4.0.0.11 ENG, So where can I get ROM: 4.01.00 ENG in ZIP (NK.nbf) file? your ftp is only exe.
Regards
socheat
rename the exe to zip
and get the file from inside the zip
it's called NK.nbf
like Biso007 said
socheat said:
Many thanks Sir
I am in Cambodia. There are two network 900 and 1800Mhz, I am using 900 Mhz, my ROM id 4.0.0.11 ENG, So where can I get ROM: 4.01.00 ENG in ZIP (NK.nbf) file? your ftp is only exe.
Regards
Click to expand...
Click to collapse
Why not using the .exe Version?
You can extract the .exe file using winzip for example and then you can find the extracted NK.nbf file....
HTH
Stefan
i just rename the file from exe to zip
and enter it like a normal dir using total commander
then i go into the dir inside it called english
and copy the file NB.nbf out
of cause would be nice to have the clean rom so one can avoid
having tmobile all over the place
LumpiStefan said:
Why not using the .exe Version?
Click to expand...
Click to collapse
Simply, coz the exe will start by upgrading the RSU and this what we want to avoid!
Rudegar said:
of cause would be nice to have the clean rom so one can avoid
having tmobile all over the place
Click to expand...
Click to collapse
Just goto the \windows\startup directory and delete the file named "VsBattery.lnk" and switch off the Today plug-ins of TMO.
If you really like the TMO s/w but hate to see the icon, use the ResourceHacker application and replace the icons, dialogs, bitmaps and string tables of the 2 files VsBattery.exe and VStreamMgr.exe with your own resouces. Yes it's not very ethical but it's "Not for Sale" ... isn't that what TMO says in the splash screen ?? :wink:
Many thanks for all your advice.
But your ftp site is so slow, i download 3 or 4 times but cannot, it automatic disconnect.
could you show other site to download.
Regards
you could install and use a download manager like getright
the server is fast enough for me so maybe it's because the line to asia is not the best try at another time or use a download manager or get somebody closer to you to host the rom
Is here somebody who can give me original or any ROM whitch is fit in to SX56 U.S.A. AT&T ? Model PW10B1 EN . This PPC is 10 days old. That's all I know about numbers :-( :? Thanks very much ! :!:
I have to reflash ROM with SD card.
www.yorch.net
www.yorch.net
cruisin-thru said:
www.yorch.net
Click to expand...
Click to collapse
Yorch's ROM Kitchen is not working
The kitchen is MIA, but if you click on the "upgrades" link you can find an original ROM image for AT&T. This is supplied as a .RAR compressed file. Open the .RAR file using WinRAR and extract NK.nbf that is located in the /English folder. You can use XDATools to copy NK.nbf to an SD card and install from the bootloader.
original ROM image for AT&T
pdhenry said:
The kitchen is MIA, but if you click on the "upgrades" link you can find an original ROM image for AT&T. This is supplied as a .RAR compressed file. Open the .RAR file using WinRAR and extract NK.nbf that is located in the /English folder. You can use XDATools to copy NK.nbf to an SD card and install from the bootloader.
Click to expand...
Click to collapse
Thankx much. Now i have everything i need but i have to go buy bigger SD card. My is only 32MB and that's not a enough Thankx again and i will let you know .
Unlock AT&T to ........
pdhenry said:
The kitchen is MIA, but if you click on the "upgrades" link you can find an original ROM image for AT&T. This is supplied as a .RAR compressed file. Open the .RAR file using WinRAR and extract NK.nbf that is located in the /English folder. You can use XDATools to copy NK.nbf to an SD card and install from the bootloader.
Click to expand...
Click to collapse
OK I fix the ROM problem and SX56 is like new, but is lock. I can't unlock it with XDAunlock. XDAunlock says : " error getting unlock code "
:-(
Now since you have the NK file of your favorit ROM, goto the kitchen again and upgrade to ROM 3.17 which will unlock your device with the first startup ... then you can reflash your device using the NK file.
I Syncronized the XDAUNLOCK to my AT&T SX56 but when I tried to run it I got "error getting unlock code" can you help...
Thanks :roll:
Backup your existing rom to sd card, install developers rom special edition, this will unlock the phone, then flash original rom from sd using bootloader method.
need to unlock sx56
is there another method to install developers rom special edition b/c i tried to cook up a new rom after being redirected to www.yorch.net but 1st my rom version at&t A.30.09 eng is not listed does it mean i can't do it
2nd i used the 3.17.03 ENG O2-Euro hoping to overwrite mine but i could only create an exe not an nk.nb1 or the .nbf file
from this new kitchen http://xda.weblink.net/ i was able to create a nk[1].nb1 rom made by chosing my current rom version does anyone know if it will unlock my phone
we getting ready to move to an area where att has no signal so i will need to stop my service with them and sign up with another provider ...
thanks in advance
Re: need to unlock sx56
les said:
is there another method to install developers rom special edition b/c i tried to cook up a new rom after being redirected to www.yorch.net but 1st my rom version at&t A.30.09 eng is not listed does it mean i can't do it 2nd i used the 3.17.03 ENG O2-Euro hoping to overwrite mine but i could only create an exe not an nk.nb1 or the .nbf file
Click to expand...
Click to collapse
Yea use Winzip to extract the .exe then you'll have direct access to the .nbf file! :wink:
HTH
thanks for the reply
Yea use Winzip to extract the .exe then you'll have direct access to the .nbf file!
Click to expand...
Click to collapse
i extracted the exe file to a new folder but there was not an .nbf file or at least i couldn't find one :?: :!: :?:
thanks
there is a subfolder named english. The NK lives there.
i found the nbf file i had to extract onto itself
i'm using the bootloader to do flash the new rom to my phone
i'm at the step where the device is suppose to recognize a new rom on my sd card
i copied the nbf file using xdarit
i plugged the card back into the pda
now i start the wallaby bootloader im running v5.15 it supposedly should recognize the new rom well the instructions say to copy the .nb1 file on the card but with the extraction method i could only get a .nbf is that why it's not being recognized
thanks
thanks guys my phone is free .... free as in unlocked
these are the steps i took
someone can do in 30 mn what i did in 1 day
-backed up my rom onto a sd card with wallaby bootloader v5.15
-using the xdarit i downloaded my old rom on my PC
-cooked a new rom with xdaunlock at yorch.net
-couldn't create a .nb1 or .nbf file so i took the .exe rom
-with winzip extracted the newly dowloaded rom onto itself to get the nk.nbf file to be flashed (when i extracted it on a new folder there was no nk file listed, so i went back to the kitchen cooked another rom saved the exe "et voila")
-i couldn't get the newly upgraded rom to be recognized when using the bootloader
-downloaded the xdatools to copy the nk file on sd card (i was unable to pick my sd card reader as a destination -weird stuff) so i did this
-from the english folder Abbas is talking about above i right click the nk file to copy it to SD card and xdatools was launched automatically
-plugged the sd card in the phone and started the bootloader v5.15 and instantly the rom on the sd card was recognized
-press action to download it
-cold reboot ( the battery on/off, erase all)
Re: thanks guys my phone is free .... free as in unlocked
hi less
i have siemens sx56 too (it arrived just today)
model : PW10B1
platform : Pocket PC
IMEI : 350314010468370
ROM v. : A.30.09 ENG
Radio v. : A.33.02
Protocol v. : 1.3.3
i want to unlock at&t wireless in order to use another provider.
im new here.
can u explain more about how to unlock the sx56. i'm still confused with your explanation. detail?? (like how to backed up your rom onto a sd card with wallaby bootloader v5.15 ... etc)
make astep by step... please
here you are
http://forum.xda-developers.com/viewtopic.php?t=3274&highlight=bootloader
unlock simens sx56
thanks for reply les
i still afraid to try it. is that realy save?
sorry for my bad english
All tools in XDA-developers.com cannot unlock SX56 radio A.33.02 or T-mobile 6.25.02
I developed a new tool to unlock them.
All tools in XDA-developers.com cannot unlock SX56 radio A.33.02 or T-mobile 6.25.02
I developed a new tool to unlock them
Click to expand...
Click to collapse
Maybe they should downgrade their radio, then unlock and then upgrade the radio and rom again. I think that is the new tool cgigate developed!
I'm so sorry about this. I really have spent over an hour searching and Googling and reading the Wiki but I just can't seem to find this simple thing.
My O2 XDA Orbit is dead so I thought I'd try one last attempt to rescue it by re-flashing the factory ROM (WM5). I found this thread via the wiki http://forum.xda-developers.com/showthread.php?t=306904 and am following the instructions for bricked devices. I downloaded the O2 Orbit WWE Wm5 factory rom from rapidshare, I have my device in the bootloader and it shows "USB" in the bottom left and the PC reacted and recognised the device when I plugged it in (but doesn't see it in Activesync).
The step I'm stuck on is that Meschle's instructions say "flash factory rom. (run rom executable or RUU updater from pc)". The rom is an nbh file so I suppose I need the RUU updater for PC. Where do I get this from? I just can't find it.
- Julian
dude if you downloaded the file the ROM you are talking about then you got ur self sorted - the package u have has the RUU or ROM Update Utility
when u go to bootloader, plug ur ppc to the pc and when u see the usb sign in the ppc screen just start the package u got from rapidshare it will do everything auto!!
let us know how you get on?
best luck with your 'surgery' it will be fine just dont worry
Maybe he downloaded simply a ROM file and not the complete package as usual. Download one of Meschle's or Tom's ROMs for example and delete the .nbh file inside the folder and replace it with yours.
Registerme said:
Maybe he downloaded simply a ROM file and not the complete package as usual. Download one of Meschle's or Tom's ROMs for example and delete the .nbh file inside the folder and replace it with yours.
Click to expand...
Click to collapse
true - Download any rom and delete the .nbh file inside the folder and replace it with yours. if u have ur rom on *.exe u can extract the ruu using winrar by right clicking and following the extraction!!
Direct download - a RUU
http://www.zshare.net/download/657626275df642/
this is a rom update utility - i got it from my files its only the ruu no rom is included so add ur *.nbh file to the extraction folder
BTW why dont u get artemis touch 3.01 rom its the best
http://forum.xda-developers.com/showthread.php?t=342298
Where can I find the NBH file for the original tmobile stock rom? I'm trying to upgrade to a better rom with more storage and program space. I can't seem to find how to download this NBH file to complete the process.
response
please help anybody
http://www.mediafire.com/?2nq9iu0a2nt