Power Button broke; help needed - 8525, TyTN, MDA Vario II, JasJam General

So, the power button on my 8525 popped off; while I can get at it with the stylus, that's a pain in the arse for normal operation.
Any way to map another button (such as, say, "PTT") to assume the functionality of the power button? Or any other similar work-arounds?

Related

power button hack for Cingular 8525?

Does anyone know if there's any type of hack to enable a different button on the Cingular 8525 to be the power on button? Being right-handed, when I pulll out the phone, it's annoying to have to use 2 hands to turn on the phone. I have the AEBPlus program but it only lets you assign a different button to power "off" the phone. I'm looking for a way to program a button on the left-hand side (possibly button 5 [ptt button] or the Windows button [labeled "ok] to power on the phone). Anyone have any ideas?
I guess no, power buttons on almost devices is connected directly to procesor (like reset button and watchdog circuit), and in fact if device is off, no system loaded, there is no way to adjust registry settings to change this.
might sound stupid, but you can try to hold the phone differently? i operate the phone with both hands (am right handed) and either way, you can power on/off the phone with 1 hand.
if holding it in the left hand, use your left hand's index finger wrapped around the back of the phone.
if holding it in the right hand, use the thumb of your right hand.
i know it isn't the solution you were looking for, but it might help
Yeah, I figured that I could do that. It's just that when I wrap my hand around like that, i have a tendency to push out the keyboard and then I have to go back to 2 hands anyway.
In using AEBPlus (or even the default commands under the "buttons" settings) and it wouldn't be so bad if I could figure out a way to get the screen to come back on. But even when I try and set one of the buttons on the right to "screen on/off" it will turn off the screen but won't turn it back on. I'm not talking about a powering on/off of the phone. I'm just talking about a way to turn on/off the screen.
never mind. I figured it out. I had the "key lock" set to the fact that the only button that would turn on the device (if the screen was off) was the power button. I fixed that. Now I'm good to go.

xda mini power button problems

hi, recently damp got into my xda mini s and disabled all the button, after a while it thought that all the buttons were pressed down, so i tried dryin the device out and it seemed to sort everything out except for the power button, the device thinks that the power button is constantly pressed in so it will either switch the screen off or ask if i want to switch the device off. i was wonderin is there any way that i can completly disable the power button and use another button like the camera button to be the power button instead? many thanks

Broken Power button

With a broken power button, is there any way I can get my xda2 into bootloader mode so I can change the ROM?
i doubt it unless you take it apart and shortcurcit the to points that the powerbutton is connected to
would prob be easier to put in a new button then i guess
I may be wrong but doesn't the power button actually put the phone into suspend mode?
Would it work to map the "suspend" function to another button (like the calendar button)? Or does a hard reset only work with the usual specific hardware buttons?
no it's not the only function
clicking on a suspece software shortcut
while reseting the device dont result in a hardreset
I have a solution. i have the same problem. Get a paperclip, and insert it into the hole where the power button should be. Slide it in until your device turns on/off. Then hold it there carefully, and press and hold the ACTIOn key and the reset button.
Works for me!

Backlight & Phone Locking Questions

A couple of quick questions for people who have actually got the phone:
1) Is there an easy way to turn the backlight/screen on/off (to save battery) at the press of a button as you can on most other touchscreen phones?
2) How easy/quick is it to lock/unlock the phone?
3) Approx how many seconds is it from when you press the power button to when the phone is fully loaded and ready to be used?
Thanks in advance!
hotlips69 said:
A couple of quick questions for people who have actually got the phone:
1) Is there an easy way to turn the backlight/screen on/off (to save battery) at the press of a button as you can on most other touchscreen phones?
2) How easy/quick is it to lock/unlock the phone?
3) Approx how many seconds is it from when you press the power button to when the phone is fully loaded and ready to be used?
Thanks in advance!
Click to expand...
Click to collapse
1. Briefly press the Power Button.
2. To Unlock ~ Swipe your finger across the screen.
3. Depends:
Are you talking of from Powering On or from switching the screen back on?
If from Powering On:-
It really depends on how many Apps/Drivers installed but mine takes around 25 seconds from a long press on the Power button to fully loaded.
If from just switching on the screen:-
Instantly.... and can be switched on either with a brief press on the Power button or the Home key at the bottom of the screen.
Thanks for the reply!
I presume the power button is on the very top edge of the phone?
So would I be correct in saying that a brief press on the power button actually turns the display off (effectively locking the phone from the point of view of accidentally pressing something on screen if it's in your pocket for example) ?
But if the home button turns the screen back on in the same way as the power button, wouldn't THAT be prone to accidentally activating the phone when you don't want it to?
I've always found it much quicker to simply turn off the display instead of actually locking it.
hotlips69 said:
Thanks for the reply!
I presume the power button is on the very top edge of the phone?
So would I be correct in saying that a brief press on the power button actually turns the display off (effectively locking the phone from the point of view of accidentally pressing something on screen if it's in your pocket for example) ?
But if the home button turns the screen back on in the same way as the power button, wouldn't THAT be prone to accidentally activating the phone when you don't want it to?
I've always found it much quicker to simply turn off the display instead of actually locking it.
Click to expand...
Click to collapse
The power button is on the side of the phone, on the right side.
If you press the power button on Android it will lock and shut off the screen yes.
and you press the home button on any android device it usually activated the screen and then you have to swipe to unlock.
Thanks...I was getting confused.
So when you briefly press the power button, it actually "locks" the phone and turns off the display and needs to be "unlocked" with another press of this button & a finger swipe.
Is this hard coded or can you stop the "home" button from also trying to lock/unlock the device, i.e. can I simply use the power button to lock/unlock and the home button doesn't do anything in this state??
hotlips69 said:
Thanks...I was getting confused.
So when you briefly press the power button, it actually "locks" the phone and turns off the display and needs to be "unlocked" with another press of this button & a finger swipe.
Click to expand...
Click to collapse
Correct.
Is this hard coded or can you stop the "home" button from also trying to lock/unlock the device, i.e. can I simply use the power button to lock/unlock and the home button doesn't do anything in this state??
Click to expand...
Click to collapse
It is hard coded.
However, to switch the phone on using the Home button does require a significant press and it is recessed.
Very quick to unlock the phone, whether you use the swipe to unlock or the Android 'join the dots' security. I actually prefer this as you have a decent sized clock on the screen.
I presume the Simcard PIN request on device startup works the same as it does on Windows Mobile devices?
edit delete

[Q] Problems with power button

I looked for similar topic but couldn't find it,I can't use power button on my hd anymore,it got broken beacuse of pressing it very often during day to turn the screen on and off...I was wondering if there is an application to assign power button function to home key so when pressing it the screen turns off and on?
Hi, having the same problem, POWER BUTTON is defect/broken, it doesn't have a resistance when I push it in. I can still switch the device on and off, but I have to press the power button hard and the power button does not feel spring loaded any more.
Are there more people having this issue and is there anybody haveing it send for warranty repair already?
Mine is a German O2 device.
Thanks
hit007

Categories

Resources