Database Users

internet on the PPC at work and home

Hi,
I have a o2 xda neo.
I've been trying to get internet working at both home and work through different settings. After lots of problems, i've done a hard reset and will try again.
Perhaps you can help with the correct settings, as I do not understand this whole Activesync 'the internet' / 'My Work' etc network settings.
I have my neo sync'd to my work pc. Fine. And when I use 'work' on the connection setting, then the internet is also fine on my PPC. HOWEVER, it updates my 'my work' settings on the PPC with my works proxy server ip etc.
OK, i understand that makes it work ok....
But my problem comes next. I want to set my o2 GPRS settings up. And they should go under 'my work' and I need to enter the o2 server IP in there.
But I can't because my work settings are there!!?!?!
So, I have to chose, do i want to use only work settings or only gprs settings...
How can I have both?
- when at work, it has internet fine.
- and on the move, i can use GPRS fine?
A million thanks in advance!
egg

egg said:
Hi,
I have a o2 xda neo.
I've been trying to get internet working at both home and work through different settings. After lots of problems, i've done a hard reset and will try again.
Perhaps you can help with the correct settings, as I do not understand this whole Activesync 'the internet' / 'My Work' etc network settings.
I have my neo sync'd to my work pc. Fine. And when I use 'work' on the connection setting, then the internet is also fine on my PPC. HOWEVER, it updates my 'my work' settings on the PPC with my works proxy server ip etc.
OK, i understand that makes it work ok....
But my problem comes next. I want to set my o2 GPRS settings up. And they should go under 'my work' and I need to enter the o2 server IP in there.
But I can't because my work settings are there!!?!?!
So, I have to chose, do i want to use only work settings or only gprs settings...
How can I have both?
- when at work, it has internet fine.
- and on the move, i can use GPRS fine?
A million thanks in advance!
egg
Click to expand...
Click to collapse
maybe i'm to simple, but i only use Internet settings and don't use @work @all.
And it works fine everywhere, @home, @work, via GPRS and via WiFi. Have you tried this?
and why would you put your gprs setting under Work?

Extremely sorry no one has replied to your post with a solution yet, I maybe too late but I only joined this forum yesterday.
You want multiple Network settings with independent Proxy settings and IP, DNS etc right??
Go to Start>Settings>Connections>Tap connections >go to the "Advanced" Tab. Tap "Select Networks" Here you are given 2 Choices of Network settings you can use. Work Network and Internet (or ISP). You have your work settings saved on Work network so do not edit that. choose the other one and edit it to enter all your GPRS settings. and save as your gprs connection. Now if you want to add a third independent setting, from the select Networks tab, click on new and you can create a third Set of connection settings (for your home maybe). Your PPC can handle 2 simultaneous connection settings perfectly, ex. 1 for Pass through and 2 for GPRS. But each time you want to connect to a third or different setting, you just go to the "Advanced Tab"> select Networks> tap the pull down options menu and select the other connection set that you would like to use et voila it is that simple.

Media Net, Myy ISP, Wap and isp

Okay, I am trying to figure out what the best settings are to maximize internet speed.
I am in Washington DC on Cingular, with Summitters 2.26 and the 2.47 radio.
IN connections I have two options, MEdia Net and My ISP in the tasks tab.
In the advanced tab, under select networks it is set to have programs connecting to the internet use MEdia Net and programs connecting to a private network using My ISP.
WHen I go to manage existing connections under MEdianet it is using wap.cingular and I input the OpenDNS setting and verified that they work.
When I go to managing existing connections under my ISP it is using isp.cingular, again with the Open DNS settings.
From you guys experience is there a magic combo? Could I use any of the 4 potential combinations?
Thanks!

dcdivenut said:
Okay, I am trying to figure out what the best settings are to maximize internet speed.
I am in Washington DC on Cingular, with Summitters 2.26 and the 2.47 radio.
IN connections I have two options, MEdia Net and My ISP in the tasks tab.
In the advanced tab, under select networks it is set to have programs connecting to the internet use MEdia Net and programs connecting to a private network using My ISP.
WHen I go to manage existing connections under MEdianet it is using wap.cingular and I input the OpenDNS setting and verified that they work.
When I go to managing existing connections under my ISP it is using isp.cingular, again with the Open DNS settings.
From you guys experience is there a magic combo? Could I use any of the 4 potential combinations?
Thanks!
Click to expand...
Click to collapse
Here is what i found... MEdia net provides me better speeds w/out open dns, but uses cingular's proxy server. However certain programs like IM+ and other apps wont connect through the proxy(and neither does wifi)**(also note that if you actually use the media net home page for some cingular stuff then the opendns settings will not direct you to those pages).... Now My Isp may look like the same connection, but its not, it dont use the proxy settings... and is slower than **** without the opendns settings.. i ran speedtests in my 2.47.11 radio thread, you might want to check them out
Here is my final take.. if i can figure out how to get my other apps to run through the proxy i would switch to media net without open dns

Orange Connection Settings (SPV-M3100)

Okay, I updated my firmware on my PSV-M3100 to the one here
http://forum.xda-developers.com/showthread.php?t=281146
And all works fine in terms of day to day usage of the PDA, but when trying to access WAP or the internet via 3G or GPRS I'm getting errors saying the connection needs editing.
Would someone running the default UK Orange firmware be kind enough to post the connection settings that come with the SPV-M3100 as standard.
I even called Orange to help but "the guy who knows the SPV-M3100 has gone home for the day" not that it is a M3100 issue, just any old Orange 3G settings I imagine?
Anyway, any help on this would be appreciated.
I have tried searching here and the net for what should be in the connections area but very little info is out there

maybe this can help:
http://www.pda-friendly.net/PDA_GPRS_Settings.htm

Thanks, but I was looking for something a bit more thorough...
Settings for Orange World, Orange Internet, Orange MMS
And then the connection settings for GPRS/3G under these
Plus proxies etc.
Still, I am meant to have Orange calling me back today to help me out here, so whatever they tell me I'll document here for the Wiki.
Cheers

ok, i don't know if there's any cab available with all the settings, but a quick search on the networking forum poped up this which also contains MMS settings:
http://forum.xda-developers.com/showthread.php?t=224183

Thanks for those...
Orange are baffled and now my phone number is not recognised by Orange World at all, and I can't see any website sites...
I'll give them 24 hours more to fix or I cancel my contract (it'll be my 3rd SPV M3100 in 10 days - must be a record).
...at least I can get a 3G connection without it bombing out, even though I can't do anything with it.

Sweet! Those settings worked perfectly on my Orange UK M3100, just as they have on all my other devices. Shame there isnt a cab that can do the same!
Cheers,
Fin

Are these of any help?
http://www.filesaveas.com/gprs.html

Hi There,
Just to let you know, you can get the settings straight from the Orange UK website. Just create a free account based on your billing and phone number, and there will be a section for them to either SMS you the settings to your M3100 or for you to stick them in yourself.
I recently put on WM6 onto my M3100, and just put the orange wap setting. Even though there are originally about 3 or 4 different gprs settings on the M3100, the only one that really ever is used is the orangewap access point settings. The orangeinternet access point settings are never touched when the M3100 3G access is taking place.
FYI from the orange site under 3G Setup for M3100:
Setting up the data account
1. On the PDA, tap on Start and then Settings.
2. Tap on the Connections tab.
3. Tap on the Connections icon.
4. Tap on the Advanced tab.
5. Tap on Select Networks.
6. Under the first drop down box, tap on New…
7. In the Enter a name for these settings: field, enter Orange GPRS WAP
8. Tap on the Modem tab.
9. Tap on New…
10. In the Enter a name for the connection: field, enter Orange GPRS WAP
11. Tap on the Select a modem drop-down list and select Cellular Line (GPRS, 3G).
12. Tap on Next.
13. In the Access point name: field, enter orangewap
14. Tap on Next.
15. Tap on Finish.
16. Tap on the Proxy Settings tab.
17. Select the This network connects to the Internet option.
18. Select the This network uses a proxy sever to connect to the Internet option.
19. Tap on Advanced… Tap on WAP.
20. In the Server field, enter 192.168.071.035
21. In the Port field, enter 8080
22. Tap on ok five times
23. Tap on x to close the Settings screen.
24. Tap on Start, Programs and then Internet Explorer.
25. Tap on Menu.
26. Tap on Favorites...
27. Tap on the Add / Delete tab.
28. Tap on Add...
29. In the Name field, enter Orange GPRS WAP
30. In the Address field, enter http://wap.orange.co.uk
31. Tap on Add.
32. Tap on ok.
33. Tap on x.
The new WAP profile is now configured and ready for use.
I did everything apart from Step 21, whereby when I wrote my settings down, the port number remained at 9201, NOT 8080 as written in step 21.
Give this a go, and see if it works for you.
Good Luck!

if you're on contract, the accesspoint is orangeinternet no password, nothing.
for MMS settings; google for them, a site called filesaveas.com has them

findus said:
Sweet! Those settings worked perfectly on my Orange UK M3100, just as they have on all my other devices. Shame there isnt a cab that can do the same!
Cheers,
Fin
Click to expand...
Click to collapse
Wanna bet!
I have created a cab file that will install Orange UK internet, WAP and MMS settings to make things a little easier!

Hi,
I have upgraded to 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10 on my M3100 which works great except for the 3G connection. To configure the device I used the 'Orange Internet MMS Settings.cab'.
Once the Direct push is configured for my exchange server, the device downloads emails. The device then drops the 3G/GPRS connection and the activesync screen shows error with No connection for data.
Looking into the xml files saved from the original Orange ROM shows extra settings that do not appear in the 'Orange Internet MMS Settings.cab' file.
Has anyone else seen this issue or have more info on Orange 3G settings?
Many Thanks
Crammy

I've flashed my phone with this WM6 ROM as well. Has your SPV M3100 stopped receiving/sending MMS's ?? I've checked and re-checked my phones MMS settings a dozen times and also had orange send them to my phone cia SMS but no joy. I wonder if it is just me or a common problem with the new WM6 ROM's and the M3100?

Mine works fine.
As long as you set up the MMS data connection AND the mms server correctly, yours will as well.
There are hundreds of threads here and elsewhere with the correct way - but the key is to set up an ORANGEMMS connection in the "private" connection settings (with user Orange, password Multimedia and APN as orangemms, then set up Orange MMS server in MMS settings with Gateway IP (proxy) address: 192.168.224.10 , Port: 9201, MMS Message (Relay) Server URL http://mms.orange.co.uk/

unwired4 said:
Mine works fine.
As long as you set up the MMS data connection AND the mms server correctly, yours will as well.
There are hundreds of threads here and elsewhere with the correct way - but the key is to set up an ORANGEMMS connection in the "private" connection settings (with user Orange, password Multimedia and APN as orangemms, then set up Orange MMS server in MMS settings with Gateway IP (proxy) address: 192.168.224.10 , Port: 9201, MMS Message (Relay) Server URL http://mms.orange.co.uk/
Click to expand...
Click to collapse
Looks like we are having a double conversation here!! Anyway. I have deleted my original MMS settings as these were set up in the "internet" connection, not the "private" connection as you advise. I have used exactly the setting you show above but when I try to send an MMS I can't and I just get the timer symbol showing they cannot currently be sent. I'm really at a dead end hear unless you have any other ideas?? I really appreciate you taking the time out to help though.

crammy said:
Hi,
I have upgraded to 20070320_RUU_Hermes_WWE_3.23.0.0_1.34.00.10 on my M3100 which works great except for the 3G connection. To configure the device I used the 'Orange Internet MMS Settings.cab'.
Once the Direct push is configured for my exchange server, the device downloads emails. The device then drops the 3G/GPRS connection and the activesync screen shows error with No connection for data.
Looking into the xml files saved from the original Orange ROM shows extra settings that do not appear in the 'Orange Internet MMS Settings.cab' file.
Has anyone else seen this issue or have more info on Orange 3G settings?
Many Thanks
Crammy
Click to expand...
Click to collapse
I'm in the same boat. Got my GPRS working (thanks very much to the chap that uploaded the cab file).
Just need the 3G settings and I'm set.
Any help appreciated

rabdo said:
Wanna bet!
I have created a cab file that will install Orange UK internet, WAP and MMS settings to make things a little easier!
Click to expand...
Click to collapse
Thanks for that, it set up internet ok (although I had to manually change the DNS servers!) but MMS doesn't work without tweaking. Anyone else had similar probs?
Thanks again,
Fin

findus said:
Thanks for that, it set up internet ok (although I had to manually change the DNS servers!) but MMS doesn't work without tweaking. Anyone else had similar probs?
Thanks again,
Fin
Click to expand...
Click to collapse
Yes, there was a slight problem with the cab file which caused problems for some so I have updated it. This is for Orange UK contract customers and installs MMS settings and Internet settings

orange world webpage
Thanks for the settings, however when I go to orange world all I get is a text site. No graphics or fomatting??? My other sites work but not orange? Anyone experiencing the same problem

neuromacer said:
Thanks for the settings, however when I go to orange world all I get is a text site. No graphics or fomatting??? My other sites work but not orange? Anyone experiencing the same problem
Click to expand...
Click to collapse
The browser is probably not returning the correct user-agent string. Unfortunatly the operators decided to use autodetection via this string. Its a right pain because i cant access the o2 pda site either, i get the crappy wap text version
I believe the gurus are investigating it. What ROM are you currently running?

mrvanx said:
The browser is probably not returning the correct user-agent string. Unfortunatly the operators decided to use autodetection via this string. Its a right pain because i cant access the o2 pda site either, i get the crappy wap text version
I believe the gurus are investigating it. What ROM are you currently running?
Click to expand...
Click to collapse
I'm currently using Black V2 with a Radio rom of 1.38.00.10

3g settings

HI i want to use 3g wap for my universal does anyknow how to get the settings thanks well appriciate

You have to ask your phone provider for the settings. I have Vodafone, and I got the settings from them. Each provider has their own settings so you have to ask them

http://www.europe.htc.com/support/software/htcp3600.html
the application at the bottom of that page should have the settings for your network provider. I've used that on the universal for Three UK and everything works perfect.

thanks aLLOT worked like a treat this topic should be pinned some people may need the settings

That link isn't working now unfortunately, can anybody cut/paste their three network settings?

Stu,
Any chance you can share the settings for Three UK. I'm just about to get a Nokia 6120 on X-Series. I'd obviously like to use my Universal on this too.
As someone else has mentioned, the link is dead.
Cheers

Settings for 3 UK on the Universal:
GPRS settings....
Modem - Cellular Line (GPRS , 3G)
APN - three.co.uk
Username - leave blank
password - leave blank
Domain - leave blank
MMS Settings....
IN MESSAGING.....Menu > Tools > Options Click *MMS
Select servers tab.....Create new server called 3 MMS
Gateway - mms.three.co.uk
Port - 8799
Server address - http://mms.um.three.co.uk:10021/mmsc
connect via - My ISP
Size Limit - 200K
Wap version - 2.0
There is a piece of software that will do it all for you as well for most worldwide providers (can't remember the name as am a bit drunk) but have it on the flash on me phone. Will extract it and attach it when one is sober.
HTH.
Psi

Cheers Doc.
Much appreciated.
The 'settings file' would be nice to have too when you have time to get round to it.

As promised:
Net wizard. a handy utility that sets up all the necessary gprs and mms settings for most providers worldwide.
Useage Instructions: Unpack and drop the contents of the net wizard folder in your windows folder and it'll appear in your settings section somewhere.
Psi

Awesome.
Cheers mate.

WiFi and proxy

Hello,
I have HTC Touch, and I'm trying to connect to wifi with ISA proxy.
First, I connected to home wifi (no proxy) and accessed internet without problem.
At work we have Radius etc. but I also connected, and I can surf to pages inside company (no need for proxy), but I can't get out to internet.
Any suggestion would be great!
tnx
small update: looks like I was surfing at work through usb cable, not wifi. But now I can't even connect to wifi at work, which I could before. Funny things going on, I'll reset.
Update2:
Newest status is: wifi connected, can surf internal sites, but can't go outside company network.
I suspect that IE is not going through the proxy at all. Which implicates that I don't know how to setup IE to use proxy on WM6???

If you edit "My Work Settings" thru Settings -> Connections -> Connections you can edit the proxy settings there. Then you say "connect to internet" thru "My Work Settings". I may be wrong, but I think you need to reset the pda as well...

OK, here are my settings:
under settings-connections-connections, advanced - select networks:
"Programs that automatically connect to Internet should connect using:" My Work Network.
When I click Edit, under Modem, there are no entries.
Under Proxy settings, "This network connects to internet" and "this network uses a proxy.." are both checked.
"Proxy server" field is disabled.
Under Advanced:
Socks line has serverort next to it. Others are empty. Server and port are good.
I click ok on all and go to IE. Type www.google.com, it says "Locating.." and that's all. Internal web sites are opening ok.
I tried to turn it off, and back on.
Tried google, not working.
I checked all settings once again and tried then, still nothing.

This is a common problem and I have not found a solution for it myself yet.
The proxy settings are lost when you apply them, and the SOCKS server settings behaves weirdly.
Anyone knows what can be done?

i want to know how to do this too... my school is also using the same system.

still no update
no update ??

configfree from Toshiba
Dear,
I had an old E800 from toshiba where configfree is installed. With this program I can configure proxy for wifi in 10 sec and it works.
does someone know where we can find this program for other PDA. I want to try it on my Cruise.
Vincent

I'm also having the same issue. Can anyone help, please?

From my experiences I can tell you: THERE IS NO WAY TO MAKE HTC AND HTTP PROXY FOR WIFI RUN. Neither with WM6.0 nor 6.1 nor a special brand nor the original firmware.
I have tried to inform HTC support, but I'm extremely pessemistic, that at least one will care. It seems to be not a WM related problem, because my WM6 ASUS doesn't have that issue.
There is a work around for browsers only: Don't use Pocket IE, use Minimo, because this browswer has it's own proxy setup. But it doesn't help you much, if you want to use other applications.
EDIT: Just to inform you, what happens, if you upgrade to WM6.1: The proxy settings are kept (HURRRAY) ---- but ignored completely It's _that_ brain damaged...
Regards

neil.young said:
From my experiences I can tell you: THERE IS NO WAY TO MAKE HTC AND HTTP PROXY FOR WIFI RUN. Neither with WM6.0 nor 6.1 nor a special brand nor the original firmware.
I have tried to inform HTC support, but I'm extremely pessemistic, that at least one will care. It seems to be not a WM related problem, because my WM6 ASUS doesn't have that issue.
There is a work around for browsers only: Don't use Pocket IE, use Minimo, because this browswer has it's own proxy setup. But it doesn't help you much, if you want to use other applications.
EDIT: Just to inform you, what happens, if you upgrade to WM6.1: The proxy settings are kept (HURRRAY) ---- but ignored completely It's _that_ brain damaged...
Regards
Click to expand...
Click to collapse
I can confirm the same "symptoms": proxy is totally being ignored on WM6.1. However, they're kept when you close the settings.

neil.young said:
From my experiences I can tell you: THERE IS NO WAY TO MAKE HTC AND HTTP PROXY FOR WIFI RUN. Neither with WM6.0 nor 6.1 nor a special brand nor the original firmware.
I have tried to inform HTC support, but I'm extremely pessemistic, that at least one will care. It seems to be not a WM related problem, because my WM6 ASUS doesn't have that issue.
There is a work around for browsers only: Don't use Pocket IE, use Minimo, because this browswer has it's own proxy setup. But it doesn't help you much, if you want to use other applications.
EDIT: Just to inform you, what happens, if you upgrade to WM6.1: The proxy settings are kept (HURRRAY) ---- but ignored completely It's _that_ brain damaged...
Regards
Click to expand...
Click to collapse
Proxy over WiFi works for me and has done with my previous HTC Wizard and now with my Kaiser. I have checked with a sniffer that I am definitely using the proxy over port 8080 (MS ISA 2006).
I have explained this before but this is how my device is setup.
ActiveSync/Windows Mobile Device Centre - Connection Settings set to 'This computer is connected to: Work Network' - Setting this to Automatic or The Internet deletes any Proxy Settings on the device when you connect it.
WiFi. My home WiFi SSID Network set to 'Connects to: Work'
Connections. 'Tasks' tab - Two settings 'My ISP' & 'My Work Network'. Advanced Tab, Select Networks. Top settings 'Programs that automatically connect to the Internet should connect using: My ISP'. Bottom settings 'Programs that automatically connect to a private network should connect using: My Work Network'. Under 'My ISP' I have the GPRS details for my carrier (Vodafone). Under 'My Work Network' I have a proxy defined with the Advanced settings configured - HTTP set to my proxy with the port 8080 and Socks set to my proxy with port 1080.
That's it and has worked for me since Windows Mobile 6.0 appeared for the Wizard. I used the same settings when I first got my Kaiser with WM 6.0 and now with WM 6.1 (more or less stock 5.2.19212) and it has worked every time.
Andy

there is always one way
http://forum.xda-developers.com/showthread.php?t=690963

WiFi and Proxy
There are too many wifi connection in the present. But the best thing is to choose the right one. Can you tell me to choose the right one with no Proxy service. Thanks