Hi, I recently flashed my wizard with a xplore core2.0n.
i noticed with not only this version but a few other rom's i have flashed, that when i try to end a call, it won't end.
i push the soft-button "End call" and i also push the red phone button. i even 'X' out the phone application, which will still keep the phone call going.... its real annoying because i have to power off my phone to end the call.
i havent been able to fully reproduce how it happens..... anyone have any suggestions???
sadegs said:
Hi, I recently flashed my wizard with a xplore core2.0n.
i noticed with not only this version but a few other rom's i have flashed, that when i try to end a call, it won't end.
i push the soft-button "End call" and i also push the red phone button. i even 'X' out the phone application, which will still keep the phone call going.... its real annoying because i have to power off my phone to end the call.
i havent been able to fully reproduce how it happens..... anyone have any suggestions???
Click to expand...
Click to collapse
I never had this happen on my Wizard but used to happen all the time on my Hermes. The thing that seems to have fixed it on that device was a radio upgrade. Which radio are you using in your Wizard?
I have the smae problem. I was using faria wm6 and cingular 2.25. I just loaded faria 3.3. I am going to test this for a while. I was also missing and dropping tons of calls.
ahhh.... i thought it was just my wizard that was doing that!!! i was getting soo aggravated because people would call and my phone would never ring or say missed call.
have you found a version that is stable and works well(radio/wm)? at this point, i am thinking about going back to wm5, because i cant stand missing calls.
does anyone know if its the radio, or wm?
i have tried radio 2.61, which dropped and never rang many calls. i am running the cingular 2.25 now, which seems slightly better... but not sure how much i am missing... end-talk still doesnt work (on occassion).
I did notice that when i use windows media player, or some other app, it will occassionally not accept calls.
has anyone else seen a version that doesnt have this problem?
thanks
Cingular has problems running WM6 w/o the 2.19 T-Mo UK Radio
If you read the threads for the cooked ROMs, you'll notice that the cook recommends a radio ROM - and it's usually the 2.19 UK radio.
sorry if this is a stupid question, but is the TMobile UK ROM, OK to run on a Cingular US network?? if so, great! i will flash tonight!
From all reports it works fine. In fact, for WM6 it works better than the stock ROM.
My end call button was not working with the Cingular 2.25 Radio ROM and WM6.1 (TNT .19199). I also was missing calls and not receiving voicemail notifications. I flashed to the 2.19.11 Rom and everything now seems to be working. Thanks.
Related
I've been losing many calls with my Wizard. The callers tell me that my phone rings and rings but I do not answer. I have voicemail disabled. I don't know if I'm losing SMS also but I haven't noticed it yet.
Some strange things that happened to me:
1) I was playing Final burn and noticed the classic slow downs that you see when you're about to receive an SMS or when your phone is ringing, but the phone did not ring. I kept playing and when I got home my father told me he called me many times, and I am sure it was during the time I was playing. It seems the phone was receiving the call but for some reason it did not ring.
2) I was near some speakers and heard the classic interference buzzing noise you hear when you're about to receive a call or SMS, it was constant, but the phone did not ring. I then took the phone and placed it up the speakers to make sure it was my phone and sure it was because the noise increased. I then turned the phone on and after two seconds it started ringing. I answered and the caller told me the phone rang many times before I answered.
This seems to be a power saving issue... I'm using IPL 3.08, SPL 3.08, GSM 2.47.11, OS 2.18.7.8 (spanish). Provider is Telecom Personal here in Argentina.
It is very annoying to come somewhere and hear "Hey I called you and you did not answer!!!" or worst yet, "Hey I called you many times during the day and you did not answer!!!"
It is a problem on the phone for sure because the provider does not say my phone isn't available, it just rings and rings.
Does anybody know what can I try to solve this? It is very annoying!!
Many thanks in advance!
Try updating your radio rom. I had the same problem with an older Radio rom like 2.07 or something then changed it to the latest one for my country (UK) and it works fine now. If you still get problems flash back to the orginal rom designed for your device.
here is the latest 2.69 radio:
ftp://xda:[email protected]/Wizard/Radio_Roms/faria 02.69.11.rar
Many thanks for the link. I just updated the ROM and will be testing it from now on... hope it fixes the problem!!
Its common for anyone with a Burned ROM.
there are many threads on it. mainly Cingular having issues, but I guess your provider can have them too.
Check around the Wizard forums here
Hello,
I have also problems with it.
I have T-Mobile NL (The Netherlands).
Still losing calls with 2.69.11...
Today, a friend of mine called me home and said "Hey I'm calling you to your cellphone and you don't answer!". I told him "Hmm please call me right now". He put the speakerphone and I heard through the land line that the phone was calling, but my phone did not ring. I turned it on and voila... it started ringing and I could accept the call. THIS IS VERY VERY VERY VERY VERY ANNOYING!!!!!!!!
Any clues, anyone??????? Should I try WM6? I don't want to reinstall my programs!! And there's no spanish version of WM6!! I'd hate to do that!!
Maybe I can try with a lower version of the radio??
Thanks!!
When you say you "turn it on", what exactly do you mean?
Marton said:
Still losing calls with 2.69.11...
Today, a friend of mine called me home and said "Hey I'm calling you to your cellphone and you don't answer!". I told him "Hmm please call me right now". He put the speakerphone and I heard through the land line that the phone was calling, but my phone did not ring. I turned it on and voila... it started ringing and I could accept the call. THIS IS VERY VERY VERY VERY VERY ANNOYING!!!!!!!!
Any clues, anyone??????? Should I try WM6? I don't want to reinstall my programs!! And there's no spanish version of WM6!! I'd hate to do that!!
Maybe I can try with a lower version of the radio??
Thanks!!
Click to expand...
Click to collapse
Unless I'm missing something here, I think that's generally the way it works -- your phone has to be ON before it will ring.
I'm pretty sure there is a spanish WM6 ROM floating around...in the WM thread
I think what he meant by 'turn it on', is waking-up the phone from suspend/sleep mode. Read his first post, regarding the speaker-thing.
Anyway, I'm not sure about spanish ROM, but isn't it the most stable Radio is 2.19? I have read somewhere, that some of these newer version of radio has this problem.
least troublesome among the radio's is "2.19", so i suggest download it and test it out
Im using 2.25 radio which was included in wizard love. It works perfectly that i know of anyway i used to get calls that would ring for 2 rings then nothing and people said they called but no reply so i upgraded my radio rom and it was fine. Make sure you have a good signal aswell because if you only have one bar sometimes its not good enough to recieve a call.
With "turn it on" yes, I meant pressing the power button to wake up the phone. Of course I did not meant "turn it on" from a total off state. I'd have to wait for it to boot if I do that... and it takes around a minute so the call would be lost anyway
I'll try 2.19 with the hope it will solve it... will post the results after a few days...
Thanks to all!!!
I checked the FTP and noticed that there are two radio versions for 2.19: UK and NL. What's the difference between them? The size difference is big... 2.7mb vs 2.2mb. Telecom Personal works on 850/1900 so which one should I try?
Thanks!!
Marton
Any clues?
I've noticed that i dont get any calls when the gprs connection is alive and transferring data (check email/web etc.)... anyone else confirm this?
I don't use GPRS... I lose calls without using it.
I installed 2.19UK two days ago. I will test it for a few days to see if this version loses calls as well...
Well, after two weeks of testing, I am glad to say that I have had no reports of unanswered calls so I think my phone will live the rest of its life with 2.19UK.
Yieeeeeeeeeeeeee-Haw!!! Now I DO have a phone!!!
Hey guys. I decided that I was going to try upgrading to the latest radio 1.50 the other day. And after having a few problems with missing calls I decided to go down to the last newest one. Well same problems. So I basically just worked my way back to 1.41 which I was using before I upgraded
Still had a few of the same problems. Not that many.
So now I went up to 1.43 and so far so Good. But I noticed that when I dial my own number it waits an very unusually long time until it starts to ring.
Wondering if you guys have any suggestions. It screwed me over last night as I was supposed to pick somebody up from the airport and never got any calls because of it.
Thanks
I am using
HTC Official WM6 Rom
1.43 Radio
Cingular 8525
Just tried Hard Reset and still same problem.
I've searched the board alot and havent really found this before.
The phone Rings right away when I hear the other phone ringing.
but when i dial the number there is a good 6 second delay until it actually starts ringing.
hrmm... i try to convince myself "if it aint broke, dont fix it" but when i see new radios and roms coming out I get excited, but now this just gives me more of a reason to stop messing around.
Ok I don't know if it is a problem I created, or a Rogers network problem. I am on Rogers AT&T in British Columbia Canada.
I have an HTC TYTN
Flashed to Windows Mobil 6, running Black Satin
Radio Version 1.50.0.0
When someone calls the phone, they can hear it ring 4 or 5 times and then it goes to voice mail. However my phone itself might ring once and then just says 1 missed call. Sometimes it won't ring at all. I can make calls just fine.
I need to fix this ASAP.
Can anyone suggest a Radio version that might fix the problem, or is there any known bugs with certain Roms (WM6 builds)
Any help will be useful.
Thanks
David aka Capt Fiero
change radio rom
or
backup and hard reset,
jdac21
Can I even do a hard reset seeing as I have changed the boot loader 3 times, the radio 3 times and went from WM5 to 2 diffrent version of WM6. When you say do a hard reset, you mean hold the power button and the OK button and hit the reset. Or is there another way of doing it that I am not aware of ?
Do you have a suggestion on which radio to change to. I think you suggested Radio version 1.51 in another thread. Which will be my next step in trying to sort this issue out, unless someone suggests going down to a lower version.
I only learned how to change radio and rom versions yesterday morning, and I have already flashed so much in and out I am starting to get comfortable with it, I just don't want to blindly flash without enough info on what I am flashing into.
try 1.51 and see
Thanks for the Tip, just goes to show that sometimes the info you are looking for is right under your nose. I did a search for Radio 1.51 and in the first 2 seconds of searching I found several threads from people having the exact same problem as me using the 1.50.0.0 radio. Calls going straight to voicemail and or not ringing on the phone. Most said the 1.51 radio fixed the problems.
So Thank You again for the suggestion. I am currently updating the radio as we speak. (using a diffrent computer to make this post)
I will post back with the results.
Yipee, it worked, I just finsihed the flash and am now running Radio 1.51 and the phone now rings after the first ring is heard when being called from a Land Line.
Thank You.
Hello! 1 hour ago I discovered another problem with my Qtek 9100. My phone was ringing, but the display was showing nothing, no incoming call, nothing at all. The phone had resumed from stand-by and in the bottom left corner was showing "CALL STATUS". I pressed the END button, the SEND button and button under "CALL STATUS". Nothing happened and the phone was still ringing. I soft reset the phone by pressing the stand-by button for 5 seconds. Turned the phone on and looked in CALL HISTORY. There wasn't any new call in there. I thought it was my girlfriend, so I called her back and confirmed that she was calling me in that moment. The problem is that she ended the call after 2 "rings", but my phone kept ringing until I soft reseted it (I heard the sound at least 6-7 times -I have windows default ring-). After that I tried to call my number from another phone, and the Qtek was working fine.
What should I do to solve this problem? Is there a problem with the radio version?
Thank you very much!
Maybe....
But men!!! welcome to Windows Mobile world hahahaha the softresets are so helpfulll hahaha enjoy this iste men we are for help.
Maybe is the Radio rom maybe not cause it works fine then isnt it?
So please before upgrade anything more please unlock your phone with HardSPL process and read very well ok?
bye.
RAdio ROM
What version of WM are you running?... when I upgrade my Wizard to WM6 got the same problem, I fixed it by changing to Radio ROM 2.19.11 (t-mobile).
This is supposed to be the best one. Or try other Radio roms until the problem is solved.
Hope this helps
ivojoe said:
What version of WM are you running?... when I upgrade my Wizard to WM6 got the same problem, I fixed it by changing to Radio ROM 2.19.11 (t-mobile).
This is supposed to be the best one. Or try other Radio roms until the problem is solved.
Hope this helps
Click to expand...
Click to collapse
I dont know, my Wizard runs on SNN ROM WM 6.1)),(IPL/SPL 2.26,GSM 02.25.1, OS 10.0.0.10) for more than half year. I had same problems, in this period a few times only. Bt somethimes I cant see a callerID. Soft reset was only solution, I am tired of changing ROMs
Can anyone help??
I've had my leo for a while now and I love the phone with one major exception.....
Sometimes when I call a contact nothing happens then after an eternity, 2minutes, the call is placed. I have good network connection and have tried it with and without 3G.
When this error is present I also get a problem whereby I can't hang up.
This seems to be a software problem. I'm on the T-mobile network in the UK. Does anyone else have the same problem?
I couldn't find anything on the forums. I've tried stripping programs/software off and have tried both hard and soft resets. The problem appeared to go away after a hard reset but then appear again weeks later for no apparent reason.
I have the original ROM version (1.43.110.2) and no significant mod's apart from Cookie home screen tabs and a few simple registry tweaks.
Any help guys, I'm contemplating taking the phone back but will I just end up with a reconditioned model? Mine's in mint condition and I don't want to end up with some banged up phone.
Hi, Did the phone work before the reg tweaks and software installation? A new T-Mobile UK ROM was published on the 15th, it might be an idea for you to flash your phone, test it then tweak, if it doesn't work after you flash it then speak to T-Mobile. If it workls after you flash it but not after you tweak then there's your problem Here is the link to HTC's UK web site with the download. I'd guess that T-Mobile will have a link on their support site for it too, somewhere: http://www.htc.com/uk/SupportDownloadList.aspx?p_id=297&act=sd&cat=2.
Hope this helps.
Mine does the same thing. Also mine also freezes when I get incoming calls. After I talk to the other person, I can't hang up. It's frozen. I have to hit the reset button on the back or take out the batter. I have two HD2's T-Mobile US Versions on release day.
I did do some HD2 tweaks to turn on the LED when I get messages though.
I'm going to reset both devices and see what happens. Maybe the old softwares don't work on the HD2 even though it's for WinMo 6.5.
I really hope it work, because I hate to return the unit. It's a beautiful hardware.
Thanks CMMY, I'll try installing the new ROM as soon as I get a chance.
I didn't have the problem before installing software/tweaks; but then again it was only probably a couple of days before I played around with it. After I did a hard reset and reinstalled some software it was working fine for at least a week before the problem re-occured, which seemed quite strange. Today the phone is working fine but will undoubtedly return, the fault seems entirely intermittent.
Daily driver: I also have the same problem when recieving calls. I'll let you know how I get on.
Same problem here, my phone is 3 days old and I have to remove the battery to end most calls, did a master reset and thought that fixed it. Couple hours later it was back at it. I'm using a tmobile hd2. This seems to be a very common problem, hope they come out with a patch soon..
Same problem here, hope it gets fixed someday
same problem
all the same..
t mobile croatia..
cant make phone call
cant hang up
...
all other provider sim works fine
help..
Do any of you use BSB tweeks?
steveianson said:
Do any of you use BSB tweeks?
Click to expand...
Click to collapse
I am using it and i also have the same problem with the calls. This issue manifested before and also after BSB instalation.
I am using an orange branded rom 1.48
hionuth said:
I am using it and i also have the same problem with the calls. This issue manifested before and also after BSB instalation.
I am using an orange branded rom 1.48
Click to expand...
Click to collapse
Try un-ticking "Tap Time"
it seems its a network related problem...
sim related...
got to ask for super sim..
like the data connection stops calls..
with a super sim the problem is much smoller.. :?
steveianson said:
Try un-ticking "Tap Time"
Click to expand...
Click to collapse
This worked for me, thanks
I have this issue across diffrent roms, soft reboot does not fix it. just fixes itself after a while
Hi
Did you find a solution to this problem?
I'm using GSM HD2 Europe.
This problem start occurring after a while when I was using 29 Aug Energy rom.
After a reset the phone work ok for few hours.
When to problem start, the send physical button does not work.
if I want to make a call I must use the "phone" from the start menu.
When I try to end the call, the phone software stop responding, but the operation system keeps working.
In order to end the call I must remove the battery.
I when back to the original rom 1.66 from HTC site.
the problem still exist but less frequently.
(by the way the original rom work much slower then the energy custom rom.)
I’m wasting so much time on this phone, and I’m on the verge of giving up .
I will be happy to get some help.
Thanks
Ran S
If you do not have BsB tweaks, but used tweak #44 in "Leo's tips and tweaks", this can cause problems for some.
can't hangup
I found the reason for this problem. (at least for the specific problem I had)
I'm using resco keyboard.
if I leave the Caps lock on after using the keyboard, then the "Send" HW button does not work, and you can't hangup calls.
by opening the keyboard again and releasing the caps lock the all work fine again.
I've also had this problem... Made me consider selling this otherwise great HD2, sometimes even running it over with a car
When I want to make a call, phone just won't dial - it freezes, but everything else works fine (only "phone app" freezes). So, I give up the call. Few minutes later, it unfreezes, and phone starts calling. Usually, from my pocket. Also, after a call, I can't hang up. I often ended up with removing the battery.
I tried everything...
Restarting the phone makes everything ok, but only for a few minutes.
Installing different app, tweaks, etc - nothing.
Removing everything and returning the phone to factory settings - nothing.
Then, I remembered to disable Sense. That was it. I have used the phone without Sense for months, and it didn't happen. Not even ONCE!
Can anybody here do anything with this?
I still want to use Sense because it looks awsome, way better than Windows interface...
You could try a custom rom. I have been using Dutty's latest and greatest without any of the problems you're describing.