Related
Hi guys,
I just tried to upgrade to the latest o2 Exec ROM, followed all the instructions to the letter ... then the dialog box that says "getting device information.... don't unplug, bla bla" came up and stayed the same for over 70 minutes and decided something isn't right, so I unplugged it.
Now, my exec only shows "USB v1.00" screen ... can't turn it off, and hard reset can't restore anything. It appears my ROM has already been zapped clean ? ...
Arrrggghh, this is driving me nuts. If anyone can tell me how I can get things back to normal, I would be eternally grateful
Chris
the same happened to me.
Connect the usb cable again and try running the setup wizard again.
1) Disconnect your Universal from the cable.
2) Perform a hard reset by pressing the 2 (-) buttons simultaneously while pressing the reset pin found at the back of the Universal.
3) You will notice that the screen is still blank with the "v 1.0" on the screen. DO NOT WORRY.
4) Connect back your Universal via cable.
5) You will hear the connection sound from your computer.
6) Run the install application again.
7) Make sure you DO NOT DISCONNECT the cable this time.
8) RELAX!!!!!! and wait for the update.
I had same problem but this is what I did
1) Hard Reset
This screen pops up
Press0 to restore
Factory default
Press X to exit
2) I pressed X
3) Plugged in USB cable
4) Voila, windows recognises new device, when driver is installed pressed X
ran software utility (rom upgrade) again
All is working, Panic over PHEW!
Phheewwww ... thanks so much you guys, really appreciate all the detailed instructions ... it's upgrading as i post this ... for a moment there, i thought i would have to ship this back to o2 ... He hee ... you guys are the greatest ! :lol:
So guys now that you all have upgraded your universals, is it worth the update ?
I've been running my current one in Basic Mode since getting it and have not experienced any problems yet.
i works better,it responds quicker and no crashes yet. the themes fit according to the screen. try it.
fince120 said:
i works better,it responds quicker and no crashes yet. the themes fit according to the screen. try it.
Click to expand...
Click to collapse
Which themes?
screen switching is like lightning, definately an improvement.
Overall Id say it seems quicker loading menus
(eg start>programs, Start>settings etc)
I think it was worth it although i shat myself when the upgrade went wrong.
Tut Tut o2, wtf was that all about?
hi guys, i have follow the instruction, and it is not working for me.. any others ideas
thanks
My Method:
1) Connect your Universal from the cable. (Whole step not need disconnect the cable)
2) Perform a hard reset by pressing the 2 (-) buttons simultaneously while pressing the reset pin found at the back of the Universal.
3)This screen pops up
Press0 to restore
Factory default
Press X to exit
4) I pressed 0
5) You will notice that the screen is still blank with the "v 1.0" on the screen. DO NOT WORRY. Wait about 15 seconds!
6) You will hear the connection sound from your computer. (If it appare a wrong connect device message on computer, then retry from step 2 to step 4. This step my need to try many times until hear the connection sound from your computer) [Some times I had repeated three steps twenty times then can success!]
6) Run the install application again.
7) Finish & Reset.
i have done, the step. Due to frustration i have remove the active sync and install a new one. might be this step will no longer use.
thanks any way. is there any other suggestion?..
upgrade completed but still screwed
After trying for almost 24 hrs.I finally got it upgraded and completed with CONGRATULATIONS ....BUT
on soft reset(pushing the reset hole) it returns back to the bootloader screen. I tried 5 times with the same result and I then tried Hard reset and the screen is still at bootloader.
How to BOOT it to TODAY screen??????
Pls help..
Re: upgrade completed but still screwed
leslie lee said:
After trying for almost 24 hrs.I finally got it upgraded and completed with CONGRATULATIONS ....BUT
on soft reset(pushing the reset hole) it returns back to the bootloader screen. I tried 5 times with the same result and I then tried Hard reset and the screen is still at bootloader.
How to BOOT it to TODAY screen??????
Pls help..
Click to expand...
Click to collapse
see your pm
thanks a million Mwang.
I shall reflash again n shall keep my fingers cross that upon completion of flashing I can reset and get to configure the dopod....on hopefully the new rom113.82
thanks n appreciated
leslie lee said:
thanks a million Mwang.
I shall reflash again n shall keep my fingers cross that upon completion of flashing I can reset and get to configure the dopod....on hopefully the new rom113.82
thanks n appreciated
Click to expand...
Click to collapse
Ihave completed flashing the xda rom 113.118 using the MaUpgradeUt noID a 2nd time. I reset my dopod900 and it reverts to bootloader screen ie top..serial bottom...v1.00
Idid the reset another 5 times with the same result
I tried the on/off buttom-no result...still at the bootloader screen..
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
leslie lee said:
leslie lee said:
thanks a million Mwang.
I shall reflash again n shall keep my fingers cross that upon completion of flashing I can reset and get to configure the dopod....on hopefully the new rom113.82
thanks n appreciated
Click to expand...
Click to collapse
Ihave completed flashing the xda rom 113.118 using the MaUpgradeUt noID a 2nd time. I reset my dopod900 and it reverts to bootloader screen ie top..serial bottom...v1.00
Idid the reset another 5 times with the same result
I tried the on/off buttom-no result...still at the bootloader screen..
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
Click to expand...
Click to collapse
Flashing ok for 3rd time also using MaUpgradeUt noID...
I must convey my sincere thanks to u Sirius n Mwang,argh for trying to help.
After the flashing finished I took the dopod off the mini usb cable n reset...reverts to bootloader mode.
tried cold boot ie..on/off button n reset same time..same result
tried hard reset...same result ie back to bootloader screen
am now flashing it for the 4th time(tried not to used MaUpgradeUt noId but come out with ERROR 120 n cannot even flash)
what shall I do?????
leslie lee said:
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
Click to expand...
Click to collapse
Download the uni dopod rom upgrade from the xda server. Extract the executable file. Then flash ONLY the radio rom using the MAUpgradeUt. Do not use the other rom files (e.g. extended and MS rom, so delete these two before running the MAUpgradeUT.) good luck.
simba said:
leslie lee said:
I am now reflashing for the 3rd time....
any helpful advise would be very much appreciated...with thanks
Click to expand...
Click to collapse
Download the uni dopod rom upgrade from the xda server. Extract the executable file. Then flash ONLY the radio rom using the MAUpgradeUt. Do not use the other rom files (e.g. extended and MS rom, so delete these two before running the MAUpgradeUT.) good luck.
Click to expand...
Click to collapse
Thank u Simba
I shall try your suggestions and wish me luck for xmas
many thanks n very much appreciated..
thank u simba
New year is on d way....
BINGO..... yes I made it...
as simba suggested I download the UNI DOPOD rom113.36..extract the executable files ie.
!. Enter BL
2.GetDeviceData
3.RUU.dll
4.UI.dll
5.RUU.Conf
6.MaUpgradeUt noID
into a new folder ..add in the radio file from either rom113.188 or 113.36
and then execute/run MaUpgradeUt noID file......IT WORKS
It therefore may means that DOPOD900 may require the DOPOD EXECUTABLE FILES (so as not to have the same problems as I had over xmas) listed above to upgrade either the CE rom, radio rom or extended rom..
It definitely had been a very interesting xmas...the freeze is finally over n a Better time awaiting, better days ahead n a better YEAR is around d corner...Happy New Year to everyone
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
bennyyen said:
Dear All,
My Atom flash wm5 ROM everything successfull, but when i cold reboot or normal reset, always go to Update Utility Screen. Can't go into the system.
Anybody can help me ?
Thanks in advance,
Regards,
Click to expand...
Click to collapse
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
brian_2cool4u said:
Try to reflash it again, got the same problem before. Check if you can go to bootloadler and reflash.
Click to expand...
Click to collapse
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
bennyyen said:
Thanks for your reply, can u guide me how to go to bootloader and reflash ?
Click to expand...
Click to collapse
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
brian_2cool4u said:
put device in boot loader mode press "camera button + reset". If boot loader is not working. just try to reflash the unit again using DSUU, but make sure your unit still have ample enough of batt.
or try other suggestions posted in here.
but for me above mentioned steps work.
Hopes this one may help you
Click to expand...
Click to collapse
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
tjkhattak61 said:
Thanks brother it helped my Atom Exec also (Oh I was sweating ).
Click to expand...
Click to collapse
No problem, I was sweating and crossed my finger when that happend to my unit before. I thought i'll say goodbye to my atom.
glad to help =)
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Where did you aquire this Chinese rom, perhaps you must ask the author or you could keep reading, try the Wiki!
bennyyen said:
I use Chinese Version WM6 ROM to flash it, for Step 1 CE ROM update are successfull, but Step 2 Bootloader get error, can't flash.
Without touching anything ( Remove cable or reset ), i try to use English Version WM5 ROM to flash it, Step 1 CE ROM update stuck in 0%, device screen blind. Wait for 5 min, still maintain 0%. Try to reset, can see O2 welcome pic, wait for a moment can go to setup screen, everthing is ok. Go into system try other function all can work, but when i reset. It return back to Update Utility Screen, same as previous problem again, put in battery automatic go to Update Utility Screen. Can't go into system again !
Anyone can help ?
Thanks in advance !
Click to expand...
Click to collapse
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
tjkhattak61 said:
I had the same problem, read this it might help.http://forum.xda-developers.com/showthread.php?t=358442
Click to expand...
Click to collapse
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
bennyyen said:
Thank you for your help, now can go into system. But no radio, want to flash in Active Sync, show me Country ID Error, into Bootloader flash, show me connection error. Would you mind to help in this also ?
Thanks in advance !
Click to expand...
Click to collapse
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
brian_2cool4u said:
if there is no radio, could have been a flash problem. try to reflash it again.
try changing USB cable aswell it can be a faulty one
Click to expand...
Click to collapse
Thanks brian_2cool4u, will try later...
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
bennyyen said:
Already test in 4 different USB cable and in different computer also. Still display Country Error in Activesync and Connection Error in Bootloader....
Click to expand...
Click to collapse
Hmmmmm thats odd? it should have been fix, oh well better get advice from where you got the rom or do a little reading in the wiki
Already can connected and flash any ROM, but new problem come out.
Comupter stuck at Stage 5 0% among 3 hrs still maintain 0%, but my device show Burn Radio MOT 100% completed
So i try to unplug the USB cable, my computer immediatly show Connection Error. After i hard reset my device, everything OK except No Radio ( NO GSM ).
Any advise
Thanks & Regards,
Hi,
Is there anyone out there with their Polaris trapped in Tri-colour (and not running a .Olipro/.OliNex SPL). if so, PM me.
Me
Olipro said:
Hi,
Is there anyone out there with their Polaris trapped in Tri-colour (and not running a .Olipro/.OliNex SPL). if so, PM me.
Click to expand...
Click to collapse
Program stopped in percent screen (in 0%) and don´t run more. After if you unplugged the PDA (an HTC Polaris, of course) and swich on don´t pass of the Tri Color screen and you can read "POLARIS. SPL-1.25.0000.CPLD-2" and in the rigth corner "RUUNBH" but nothing began, no OS or programs, nothing... Any suggestions and help??? Thank You.
Can't flash SPL, Polaris FRA ROM; was bricked...solved,can't flash
Hi Olipro,
last week-end I tried flashing hard SPL v2 on my French Polaris, before planning to flash the new radio 1.64, then bepe's 0.66 ROM.
I spent the first part of Saturday night trying numerous times, recovering, taking battery away, and trying agin - never worked. Then I tried flashing the 1.64 radio, it went up to 99%, then stopped, error message: from then on my Polaris went to boot-loader only, after soft reset or even hard resets. Until dawn I tried to fix this (I'm not a developper, I'm a power user travelling 4 days a week by plane accross Europe). Couldn't fix it.
On Sunday I called a friend of mine who imports HTC and sells the channel: I gave him my Polaris and he took it with him to fix it. Result was very surprising: I had given him your hard SPL v2, and a few nice ROM's from this site, specailly bepe's, as well as all the radio versions listed here for POlaris; well none of all that worked with him, and he could only reflash the official ROM and radio, and return it back to me...(which was very kind as it took him some time).
BUT, overall I'm very frustrated as I'm an early adopter, and I would so much like to try cooked ROM's on this fabulous device.
What do you think I should do? Any idea?
Is there a way to guide me though a custom process or is there a real issue on ALL French ROM's out there? (can't believe that).
Your inputs would really be appreciated.
Thx many, HangLoose.
23:45 > it finally worked !! (I must have been doing something wrong previously, sorry for bothering Olipro).
And thx for enabling us to use best in class cooked ROM's from this site.
I'll be loading bepe 0.67 just now. !!
Regards, HangLoose59
My cruiser not leaving the screen tricolor
My cruiser not leaving the screen tricolor, Tried to replace the original language (Spanish) by the English and upgrade stopped in 14%, dai then not leaving the screen tricolor.
Some hint.
v1zca1n0 said:
Program stopped in percent screen (in 0%) and don´t run more. After if you unplugged the PDA (an HTC Polaris, of course) and swich on don´t pass of the Tri Color screen and you can read "POLARIS. SPL-1.25.0000.CPLD-2" and in the rigth corner "RUUNBH" but nothing began, no OS or programs, nothing... Any suggestions and help??? Thank You.
Click to expand...
Click to collapse
FIXED! at last the problem was I used a SPL for HTC ELF not Polaris and, I don´t know why, that makes OS stopped in an eternal bug... Whem I use again the same Hard SPL for Elf Voilá! Do it! And know all works fine. I promisse: I will never change the BootSplash be sure
v1zca1n0 said:
FIXED! at last the problem was I used a SPL for HTC ELF not Polaris and, I don´t know why, that makes OS stopped in an eternal bug... Whem I use again the same Hard SPL for Elf Voilá! Do it! And know all works fine. I promisse: I will never change the BootSplash be sure
Click to expand...
Click to collapse
I have the same problem My Pc has scrached and now my polaris is blocked to the bootloader
Is some could you help us ?
Diagorn said:
I have the same problem My Pc has scrached and now my polaris is blocked to the bootloader
Is some could you help us ?
Click to expand...
Click to collapse
Hard reset the device and it can take u out of bootloaer mode. To hard reset:
GPS/MESSAGING and INTERNET EXPLORER buttons, and at the same time, use the stylus to press the RESET button at the bottom of your device.
2. Release the RESET button, but continue pressing the GPS/MESSAGING and INTERNET EXPLORER buttons until you see a message on the screen
Release the buttons, and then press SEND on your device to perform the hard reset, or press any other button to cancel the reset.
Hello thanks for your help but I have already tried this
Diagorn said:
Hello thanks for your help but I have already tried this
Click to expand...
Click to collapse
Try with this program do a Hard SPL and tell me how gone
the Elf is a DiskOnChip device, the Polaris is plain NAND.
you can try it, but frankly, I think it's not really the smartest move
Olipro said:
the Elf is a DiskOnChip device, the Polaris is plain NAND.
you can try it, but frankly, I think it's not really the smartest move
Click to expand...
Click to collapse
You are rigth Olipro as always, but I left because I have the experience of used badly and block the PDA until I use again and unblock the machine. Maybe the diferent chip make a kind of bug than only can be fixed with Elf Hard SPL I don´t know but with me works. Let see if is the same with Diagorn
could be a side-effect, but the file should be blocked from flashing anyway.
i have the problem too. waiting for the solusion
Olipro said:
could be a side-effect, but the file should be blocked from flashing anyway.
Click to expand...
Click to collapse
Curiously Elf SPL unblock the flash and I don´t know why Anyway I stopped flashing anymore because I don´t want have the same problem again. Only I explain what happend to anyone that can have the same problem and attach the Elf Hard SPL if they want use and probe
BT Problem
The BT LED styed ON and after hardware reset (removing the battery, the reset button wasn't working) only the bootloader screen. It revived after I flashed the Radio ROM. And what bugs me is that BT button remains ON in TouchCommander, but NO BT. any ideas???
BT Problem
After synchronising with the PC i noticed the BT LED goes OFF ...
BTW
HardSPLv2.2
ROM 1.28Aserg.1WWE
RADIO 1.64.08.21
Cruise stuck in 3-color screen
Hi,
My Cruise just frooze, during GPRS synch with Exchange server. Soft reset and hard reset do not work anymore. If I take out the battery, and then switch on the device it stops in the 3-color screen. BT light stays on.
I have not made any changes to my Cruise, only added a 8 Gb SD card.
v1zca1n0 said:
Program stopped in percent screen (in 0%) and don´t run more. After if you unplugged the PDA (an HTC Polaris, of course) and swich on don´t pass of the Tri Color screen and you can read "POLARIS. SPL-1.25.0000.CPLD-2" and in the rigth corner "RUUNBH" but nothing began, no OS or programs, nothing... Any suggestions and help??? Thank You.
Click to expand...
Click to collapse
me too...somebody help !!! sorry my english
Strangely enough it works!!!
v1zca1n0 said:
Try with this program do a Hard SPL and tell me how gone
Click to expand...
Click to collapse
I was really frightened when my TC got stuck in Tri-Colour screen. MY Polaris came to standstill, trapped in.
Over and over ROMUpdateUtility.exe shows ERROR [262 or 284]: UPDATE ERROR while trying update.
And only this strange RUU gave me other ERROR [296]: UPGRADE ONLY that helped me to quite out the three-color screen and installed new radio successfully.
I have a HTC ELF 0100 i want to change the language to english but i cant make anything. I try to hard reset the phone but this also is impossible. there is Windows mobile 6.1 installed in it.
Things you might need to know:
I HOLD the green and red Button and click on reset - for hard reset but nothing happens
To update an english rom i need to CID unlock. but this also fails saying ERROR 260.
And when try to upload a COOK rom it says ERROR 260 and the HTC screen become black i.e standy mode. it does not goes to the BOOTLOADER mode!
Where is the PROBLEM please help urgent !!
im sorry to tell u, but probably u dont have and elf. its a clone.
search the forum for clone info.
But i can assure you it an original one. Not clone or china made. But one things is that the battery is not an original one.
But i can assure you that the mobile is original. Not a China made.
zakiyy said:
But i can assure you it an original one. Not clone or china made. But one things is that the battery is not an original one.
But i can assure you that the mobile is original. Not a China made.
Click to expand...
Click to collapse
Use dsixda's All-in-one tool (http://forum.xda-developers.com/showthread.php?t=418892 ) to find the specific type of your phone.
Than we might be able to help you.
Dala11 said:
Use dsixda's All-in-one tool (http://forum.xda-developers.com/showthread.php?t=418892 ) to find the specific type of your phone.
Than we might be able to help you.
Click to expand...
Click to collapse
Hi man thx for the REPLY but this also i tried !! it does not shows anything !! Only giving Data UNKONw or something like that!
I was able to install ENABLERAPI.cab to make the above PROGRAM work.
i want to know why the ElF is not able to HARD RESET.... I HOLD the TWO BUTTONS [red&green] and PRESS RESET but it never enter the HARD reset..
Very Strange and time comsuming for me i need a REAL solution !!
zakiyy said:
Hi man thx for the REPLY but this also i tried !! it does not shows anything !! Only giving Data UNKONw or something like that!
Click to expand...
Click to collapse
Big chance your phone is a fake.. I'm sorry man..
Perhaps if you posted some pictures of your device (also the backside without the cover, and one without the battery) some might be able to help you figure out what's going on.
Hi
All what you mentioned : No hard reset, No bootloader, No Data with mtty mean one thing this is a chinese clone of ELF and you will find no solution here
Hard reset htc touch elf
hi everybody,
Please help me with my htc touch elf,
I try to hard-reset my htc that have windows 6.5 because of I can't run completely windows and can't soft reset it.
Please help me
Thanx !!!!!!!!!
HEY maaan !
just press the power off button + the camera button and the tri-color screen will be appeared
hi my friends.
I changed my jasjar's tomal 6.1 rom to Original WM5 for sell my phone
but after changing rom, i have a terrible problem.
when i closed the battery for change the simcard and turn it on. when the windows logo appears a blue screen showed and the gsm led begin to work (blinker).
after several soft resets the windows starts and ready to work but when i press the power button to standby the device (sometimes) for turn on the device (after standby) the screen didn't appear.!!
i'm very upset
after that i flashing the radio to newer version (1.18) and flash back to WM6.1 TOmal , WM6 , ... but i still have this problem.
in the tomal's wm6.1 rom (TML_v82_WM61_19960) before the problem shown an error appears under the windows logo > The Skin Is Not Loaded < and after that a black or blue screen appears and nothing...
please help me to fix it.
thanks friends
No Answer ?!
Really ?!
it's very important for me.
plz help
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
-Jonny- said:
Only thing I can think of is to doc-format (mtty). And then flash ROM again. Then make sure you Hard Reset.
Click to expand...
Click to collapse
What is the mtty ? doc-format ?
How can i do it ?
tnx for attention
DOC format
-Jonny- said:
DOC format
Click to expand...
Click to collapse
wow , thanks for guide me.
as your experiences , this work would be harmful for the device ?
thankx
It's not harmful - basically it totally wipes the device removing everything (including garbage). So you will, of course, need to flash a ROM afterwards.