I already asked this in one post, but no one answered, hoping someone has more info.
For some reason once I install either mUn or LSVW's WM6 ROM's my ringer volume is jacked through the roof! I have my ringer all the way down and it's still very loud. When I turn it up it does indeed go louder, but I really don't need it any louder. Is there some low ringer fix that they might be applying to their ROM? Does anyone know where I can go to fix this problem and turn it down a bit? I don't need my whole office hearing my phone ring all the time.
Seriously, no one else has this problem with either of those ROM's? Maybe my Trin is jacked huh?
I found about this right now...
Mun, please post a cab or two
i agree.. my volume is waaay louder than before ha.. funny cause i think in the WM5 aku3.5 ROM i last flashed i noticed my volume went softer.. now its opposite.. it's not bugging me too much, but i've not received any responses to any queries i made about what makes the volume change either..
Edited: deleted
mun_rus said:
Try this patch)
Click to expand...
Click to collapse
Holy crap! That appears to have severly messed up my device. I get the boot screen, then my screen just goes white. Nothing ever loads up, the green light blinks like there is service, but I cannot do anything.
EDIT: I'm reflashing and I will try to install again on a fresh ROM.
schwags said:
Holy crap! That appears to have severly messed up my device. I get the boot screen, then my screen just goes white. Nothing ever loads up, the green light blinks like there is service, but I cannot do anything.
EDIT: I'm reflashing and I will try to install again on a fresh ROM.
Click to expand...
Click to collapse
BTW, it works for my and lvsw roms.. Forgot to say..
mun_rus said:
BTW, it works for my and lvsw roms.. Forgot to say..
Click to expand...
Click to collapse
Hmm...same thing on a fresh reflash. I'm using your rom mUn (which is awesome btw) and for some reason it kills my device after the boot screen.
it doesn`t mun...
Crashed mine too...
Sorry...
But i tryed it on my wm6.SE rom and it worked for me...
I'll rebuild cab
Urgent!
How the hell to reflash??
When I connect my PDA to PC ruu updater says no device found??
schwags and the rest, how can I reflash my device?
I just pulled my battery, then hold down the camera button while you turn on the device. This should get you to the tri-color screen, then run the update and it should work.
U don't need to reflash
Hold 2 softkeys at the same time and click reset
So you will see message on grey screen. Press green button for Hard Reset and Ok for boot
mun_rus said:
U don't need to reflash
Hold 2 softkeys at the same time and click reset
So you will see message on grey screen. Press green button for Hard Reset and Ok for boot
Click to expand...
Click to collapse
Ha, thanks, good tip mUn! I'll have to make sure I do this next time I have a problem.
damn my trinity is bricked
I can`t get to the bootloader, and I cant hard reset...
More detailed please
grega_slo said:
damn my trinity is bricked
I can`t get to the bootloader, and I cant hard reset...
More detailed please
Click to expand...
Click to collapse
have you tried taking the battery out?
yeah
I came to the white screen with green light flashing...
grega_slo said:
yeah
I came to the white screen with green light flashing...
Click to expand...
Click to collapse
What if you pull the battery, and then hold the camera button down while you start it back up again? That doesn't get you to the boot loader? it worked for me.
WHILE
That was pretty much only info I needed!
Reflashing now...
THANKS!
grega_slo said:
WHILE
That was pretty much only info I needed!
Reflashing now...
THANKS!
Click to expand...
Click to collapse
Good news! glad you got it working!!
Related
i-mate JAM hard resetting every time I press power button.... got a recent backup, but it's not good to me as everything goes back to factory when I turn the device off.
Even changed batteries, stil same thing.
Any ideas?
check if the reset button isnt stucked. Maybe with a ....(small thing) or something you could get te button back to his right position
sipdawg said:
check if the reset button isnt stucked. Maybe with a ....(small thing) or something you could get te button back to his right position
Click to expand...
Click to collapse
Yeah, that's what I thought... doesn't seem to be though.
I've taken the thing apart (out of warranty since I ugraded the ROM) to give it a clean and a shake....
Will take some fotos of the insides/screws etc in case anyone wlse wants to take their apart for a whatever...
not nice
nut when youre doing that!? ... check this out! :
http://forum.xda-developers.com/viewtopic.php?t=21041&highlight=
sipdawg said:
not nice
nut when youre doing that!? ... check this out! :
http://forum.xda-developers.com/viewtopic.php?t=21041&highlight=
Click to expand...
Click to collapse
Whoops!!!
OK, took it apart, put it back together, but stil resetting on power button press.. damn.
Wonder if my back up battery is dead? Damn jujst checked, it's reporting 0%. Even though it never gave me an error mesages before that.....
Will leave it on charge overnight.
EDIT, it's reporting 25% backup battery now.... hopefully rthat's al it was.
EDIT EDIT: 50% backup power now... I'm so pleased I don't seem to have damaged anything taking it apart..
sipdawg said:
not nice
nut when youre doing that!? ... check this out! :
http://forum.xda-developers.com/viewtopic.php?t=21041&highlight=
Click to expand...
Click to collapse
Damn, those skins look nice...
cool! youfe done it! , was it hard to get the device in parts?
maybe i will polish it to... when you do that you create a mfoo shinny machine
i dont know what happened ?
it was working fine i picked it up and it was off... and now it wont turn on..
What happened?..
boinger66 said:
i dont know what happened ?
it was working fine i picked it up and it was off... and now it wont turn on..
Click to expand...
Click to collapse
WTF??!!? Have you made the usual hard reset, battery out, put it into Bootloader mode, reflashed or anything like it?
Doesn't sound good. I'll find you on IM.
Do u charge it ?
Do u see a led ?
xmen06 said:
Do u charge it ?
Do u see a led ?
Click to expand...
Click to collapse
i do...
also it was really hot when i picked it up
EDIT: just fixed it... seems the battery got ultra drained somehow ... went from 90% - 0 in 30 min... i dont know why that happened
that's wierd...Mine would not turn on yesterday. It just had a blank screen with the Green light on around the joystick (like it was fully charged). So I soft reset and nothing, still green light and blank screen. So set it to bootloader mode and ran mtty to check it out, Mtty tests were normal and nothing seemed wrong, tried reset, check for bad blocks, and the normal info and task commands, everything looked normal, but it would not boot up...took out the battery and waited 10 minutes, still green light and blank screen. Charged battery still same issues
SO I tried to hard reset...still same thing,, it asked to confirm hard reset, looked like it did hard reset, but still same problem..
SO I finally, put it in bootloader, reloaded the wm6 HTC__001 rom and it worked fine, Restored from backup and I was back to normal...But I was starting to get a little scared that some how my advantage was bricked...
Haven't had any problems since....Wierd
plz helpurgent
can sum1 plz tell me how to hard reset ameo or how to put in bootloader mode..
thanx in advance
hubmobile said:
can sum1 plz tell me how to hard reset ameo or how to put in bootloader mode..
thanx in advance
Click to expand...
Click to collapse
There are two main methods:
1. Try using the search function.
2. Read the wiki.
Try either of these and you will suceed. Ask without doing either and you will become unpopular!
boinger66 said:
i dont know what happened ?
it was working fine i picked it up and it was off... and now it wont turn on..
Click to expand...
Click to collapse
the device powers itself off if the battery overheats.
take it out and leave it for a bit
same problem here
same here, after doing Olipro's AthenaUnlocker step 1 and went to Bootloader mode to check spl version. my device is stuck to its bootloader mode & when i soft reset the only thing that will turn on is the led light of the joystick. is there a way to bring it back to normal mode from bootloader mode?
thanks in advace!
rvnteck said:
same here, after doing Olipro's AthenaUnlocker step 1 and went to Bootloader mode to check spl version. my device is stuck to its bootloader mode & when i soft reset the only thing that will turn on is the led light of the joystick. is there a way to bring it back to normal mode from bootloader mode?
thanks in advace!
Click to expand...
Click to collapse
Have you removed the mini sd?
unfortunately no
Even hard reset cant fix it, i guess im down to flashing it to the x7501 rom. i hope this works
- My Ameo after auto turn off (I set 1 min) it can not wakeup when I press ON/OFF button, all light is OK (flash), OFF sound is heared when a incomming call.
- I must soft reset it for resuming again
What is wrong ???
Help me please.
Thanks..
boinger66 said:
i do...
also it was really hot when i picked it up
EDIT: just fixed it... seems the battery got ultra drained somehow ... went from 90% - 0 in 30 min... i dont know why that happened
Click to expand...
Click to collapse
Nice panic there! LOL
;-p
vios5689 said:
- My Ameo after auto turn off (I set 1 min) it can not wakeup when I press ON/OFF button, all light is OK (flash), OFF sound is heared when a incomming call.
- I must soft reset it for resuming again
What is wrong ???
Help me please.
Thanks..
Click to expand...
Click to collapse
Typically this is caused by some software running in the back ground. Try to disable anything from running and then re-enable one thing at a time and see if you can isolate the problem. Sometimes it's two programs conflicting with each other so you may have to do some experimentation here. Hope this helps.
eagle 1 said:
that's wierd...Mine would not turn on yesterday. It just had a blank screen with the Green light on around the joystick (like it was fully charged). So I soft reset and nothing, still green light and blank screen. So set it to bootloader mode and ran mtty to check it out, Mtty tests were normal and nothing seemed wrong, tried reset, check for bad blocks, and the normal info and task commands, everything looked normal, but it would not boot up...took out the battery and waited 10 minutes, still green light and blank screen. Charged battery still same issues
SO I tried to hard reset...still same thing,, it asked to confirm hard reset, looked like it did hard reset, but still same problem..
SO I finally, put it in bootloader, reloaded the wm6 HTC__001 rom and it worked fine, Restored from backup and I was back to normal...But I was starting to get a little scared that some how my advantage was bricked...
Haven't had any problems since....Wierd
Click to expand...
Click to collapse
That is weird and scary. Did you try to remove the battery then plug the device into the power source with the battery out also?
rvnteck said:
same here, after doing Olipro's AthenaUnlocker step 1 and went to Bootloader mode to check spl version. my device is stuck to its bootloader mode & when i soft reset the only thing that will turn on is the led light of the joystick. is there a way to bring it back to normal mode from bootloader mode?
thanks in advace!
Click to expand...
Click to collapse
Yes, something about flashing a specific version to your device but since this never happened to me i don't have details. Feel free to search the threads....i know it's somewhere at the top. Have fun!
boinger66 said:
i do...
also it was really hot when i picked it up
EDIT: just fixed it... seems the battery got ultra drained somehow ... went from 90% - 0 in 30 min... i dont know why that happened
Click to expand...
Click to collapse
I had my ameo also drawing 1,5A from the battery (actually powerdrain was higher than charge current) Never found out why.
Hi, could you please help. I installed the banana game then realised that the game wasn't compatible with HD2 as the game was showin g only on 3/4 of the screen and thye sense was unstable. I removed the app and the device switched offf. Sinced the I haven't been able to turn it on all i get is the initial black screen wity the pink ring. It won't resen using up down method and task 29 wont work as it is unable to connect. can anyone help....
what "up down method" its not up then down lol if you want to hard reset turn youre phone off press and hold up and down volume buttons and turn the phone on you should get a grey screen then follow instructions, and task 29 will work if you can get in bootloader but why would you want to wipe the mobile if you dont no what you doing?
and the banana game doesnt really give us much insight does it lol
Demon_man said:
what "up down method" its not up then down lol if you want to hard reset turn youre phone off press and hold up and down volume buttons and turn the phone on you should get a grey screen then follow instructions, and task 29 will work if you can get in bootloader but why would you want to wipe the mobile if you dont no what you doing?
and the banana game doesnt really give us much insight does it lol
Click to expand...
Click to collapse
Hi Demon,
I am glad you find this funny but here I am in tears re: the situation. I meant vol up and down for hard reset but its not working bfore turn on. I chose the task 29 as I am desperate and willing to reset to default setting. I did try vol up and down before turning on my mobile and still not working. See below url for the game downloaded but I didn't downloaded from this site I used the omarket. thanks
freewarepocketpc.net/ppc-download-bananas
I wasnt laughing mate, so can you get in bootloader?? (press and hold volume down while turning the phone on keep holding till you get a coloured screen)is you battery charged?
Demon_man said:
I wasnt laughing mate, so can you get in bootloader?? is you battery charged?
Click to expand...
Click to collapse
No I can't all i am getting is the RGD screen...
Thanks
what do you mean RGD screen, can you post a pic if you have a camera
try taking the battery cover off, and then press the vol up and vol down together, carefully. Make sure you feel the contact as you press it. I struggled at the beginning to make it wiork. the button isn't really meant to bend at both ends, so it feels like you have them both pressed, but dont.
Once you are confident that both ends are pressed, only then tap and release power to start the phone.
ALl being well, 5 or so seconds later the three coloured screen should come up.
Fingers x'd
Demon_man said:
what do you mean RGD screen, can you post a pic if you have a camera
Click to expand...
Click to collapse
See attachment... this is a uk t mobile phone
try the tip sam posted for getting into a hard reset he explain better than me, does it normally start up like that never seen that before
Yes it does normally start like that ... I did try sam's advice still same screen coming up.
Thanks
samsamuel said:
try taking the battery cover off, and then press the vol up and vol down together, carefully. Make sure you feel the contact as you press it. I struggled at the beginning to make it wiork. the button isn't really meant to bend at both ends, so it feels like you have them both pressed, but dont.
Once you are confident that both ends are pressed, only then tap and release power to start the phone.
ALl being well, 5 or so seconds later the three coloured screen should come up.
Fingers x'd
Click to expand...
Click to collapse
I tried again and you are right just a tap on the power as before i think i was pressing too hard on the power button ....now I have a gray screen with the following:
This operation will delete all your personal data ......
What should I do now to avoid losing all data...
Thanks
ok, now dont take this the wrong way mate because everyone has done this, but you must be doing it wrong or not catching the buttons right, if you have someone with you, you're easiest option would be turn your phone on as normal take your battery cover off, press and hold both volume buttons and keep holding them, get someone to press the red button near the batter with a pin, that way you have hold of both volume buttons, keep holding them while the phone is restarting and you should get a different screen come up,
like i said its quite tricky to get it the first time.
you cant not loose anything this is youre only option im affriad, but youre phone will work again
Demon_man said:
try the tip sam posted for getting into a hard reset he explain better than me, does it normally start up like that never seen that before
Click to expand...
Click to collapse
You are right, Sam's advice did work now i have a grey screen with the followings: This operation will delete all your personal data .... etc
How can i restart without losing all the data.
Thanks
HD2 Jay said:
You are right, Sam's advice did work now i have a grey screen with the followings: This operation will delete all your personal data .... etc
How can i restart without losing all the data.
Thanks
Click to expand...
Click to collapse
you will loose it all mate no choice, if you want you're phone back up and running, sorry,
HD2 Jay said:
I tried again and you are right just a tap on the power as before i think i was pressing too hard on the power button ....now I have a gray screen with the following:
This operation will delete all your personal data ......
What should I do now to avoid losing all data...
Thanks
Click to expand...
Click to collapse
hehe, its a bit of a three handed job. I usualy use a thumb on each vol button, and my top lip to press power, lol.
I think sadly your data is gone. I can't think of a way to save it if the phone wont boot.
Plus, if this banana thing did mess your phone up, you want to be sure its gone.
(A good lesson in syncing your data regularly )
If the hard reset doesn't work, then my next steps would be to task29 from bootloader (volume down and power, dont touch vol up) followed by flashing your stock rom over usb.
Demon_man said:
you will loose it all mate no choice, if you want you're phone back up and running, sorry,
Click to expand...
Click to collapse
Thats fine, I am happy with that. Thanks to the both of you... you guys are legends.
Have a good evening.
Jay
HD2 Jay said:
Thats fine, I am happy with that. Thanks to the both of you... you guys are legends.
Have a good evening.
Jay
Click to expand...
Click to collapse
credit to Sam he great at explaining things properly, Glad you got it sorted mate
Demon_man said:
credit to Sam he great at explaining things properly, Happy you got it sorted
Click to expand...
Click to collapse
lol nah you were both great!!!!!
take care
Demon_man said:
credit to Sam he great at explaining things properly, Glad you got it sorted mate
Click to expand...
Click to collapse
HD2 Jay said:
lol nah you were both great!!!!!
take care
Click to expand...
Click to collapse
group hug! hehe.
hi just wondering can you conect the phone via usb to pc does the pc read you r phone ?
I just tried the volume down + home + power button, just to see if it works...and it does. Now what do i do? Its got the android robot working, and says downlloading and Do not turn off target!!!....
what do i do now? Take out the battery?
Singhman said:
I just tried the volume down + home + power button, just to see if it works...and it does. Now what do i do? Its got the android robot working, and says downlloading and Do not turn off target!!!....
what do i do now? Take out the battery?
Click to expand...
Click to collapse
then you are a happy man
*** do you your happy dance now ***
it means when worse case scenario happen, you can easily fix the phone
yes just turn it off by holding the power button, or take out the battery
battery way is faster
Singhman said:
I just tried the volume down + home + power button, just to see if it works...and it does. Now what do i do? Its got the android robot working, and says downlloading and Do not turn off target!!!....
what do i do now? Take out the battery?
Click to expand...
Click to collapse
What?
You got into the Download mode....
That is used to flash with ODIN3.
If you are not using it to flash your device right now, you may Sir. turn off your device and boot it up again, or even remove the battery.
If you are flashing you should see by now a green bar growing on your screen. Do no turn off your phone by this time!
thanks guys...i just held the power button for 10 seconds, its ok (i was sort of scared that i might brick the phone if i pull the battery). Wow...this forum is awesome, I got responses almost instantly! Thanks
you sure it's green?
the last time i flashed mine was a purple download line going across the screen
ahh never mind, you were talking about the Odin3 side.
AllGamer said:
you sure it's green?
the last time i flashed mine was a purple download line going across the screen
ahh never mind, you were talking about the Odin3 side.
Click to expand...
Click to collapse
No Sir.! I was actually talking about the bar which grows on our device screens, you sure it is Purple?
I was really convinced it was green, damn me
both times i loaded a new ROM it was purple going across the screen
either it's my eyes having colour problem, or you are, or maybe each devices really picks a colour at random
LOL
AllGamer said:
both times i loaded a new ROM it was purple going across the screen
either it's my eyes having colour problem, or you are, or maybe each devices really picks a colour at random
LOL
Click to expand...
Click to collapse
Haha.
I will have a better look at it next time
mine was green......maybe its just how the phone is feeling at the moment?? haha
If it doesnot have the 3 button recovery, the white "samsung i9000m" splash screen will keep cycling over and over... when that happens do we do the same thing (remove battery or power off)?
I want to test a unit at a bell store before buying but dont want to "break" it.
If you are not in the process of flashing, a battery pull would do.
Sent from my GT-I9000 using XDA App
Take out the battery and put back in. then switch your phone on. Sorted.
Sent from my GT-I9000 using XDA App
lol, I must say I'm surprised about how gentle the replies are... And the fact there are already 12 of them (half of them being about the color of the status bar )
dagrim1 said:
lol, I must say I'm surprised about how gentle the replies are... And the fact there are already 12 of them (half of them being about the color of the status bar )
Click to expand...
Click to collapse
Haha, you guys are awesome and full of patience to newbs like me. Thanks
Hey, i need help. I know nothiing about these phones. I came on here and got help last year to make my hd2 windows into an android.... i did all the work, wahtever you wanna call it, flashing or ROM. something like that. Well anyways, over the the past few months, its been getting stuck on the unlock screen. nothing works, then all of a sudden it will swipe and unlock. now its been stuck for two weeks and i have tried everything, taking the battery out and resetting from the small button in the back, but nothing changes.
lovelyxleo said:
Hey, i need help. I know nothiing about these phones. I came on here and got help last year to make my hd2 windows into an android.... i did all the work, wahtever you wanna call it, flashing or ROM. something like that. Well anyways, over the the past few months, its been getting stuck on the unlock screen. nothing works, then all of a sudden it will swipe and unlock. now its been stuck for two weeks and i have tried everything, taking the battery out and resetting from the small button in the back, but nothing changes.
Click to expand...
Click to collapse
you can try this but you will have to press it really really hard and try it multiple times
http://forum.xda-developers.com/showpost.php?p=19458378&postcount=2
Kameirus said:
you can try this but you will have to press it really really hard and try it multiple times
http://forum.xda-developers.com/showpost.php?p=19458378&postcount=2
Click to expand...
Click to collapse
Then once you do above and get the screen working again, you can do what i did and use attached program to remap one of the other buttons (i chose green phone button since i press the phone icon to use the phone anyhow) and remap it to function as the power button and never worry about the screen again
To install: download to computer, then use adb install to install.
Or the simple way, just download straight to phone, navigate to the downloaded folder using a file explorer(astro works well found on the market) and launch it through the file explorer to install.
elesbb said:
Then once you do above and get the screen working again, you can do what i did and use attached program to remap one of the other buttons (i chose green phone button since i press the phone icon to use the phone anyhow) and remap it to function as the power button and never worry about the screen again
Click to expand...
Click to collapse
pssst
you forgot the attachment
Kameirus said:
pssst
you forgot the attachment
Click to expand...
Click to collapse
Not uh! lol thanks Ive edited post
elesbb said:
Not uh! lol thanks Ive edited post
Click to expand...
Click to collapse
..lol....
Yep, I have tried that.... pushing the end button a zillion times. It use to work before, but now it doesnt. I tried the end button, the call button, sliding over the other keys, just tapping on the unlock keys on the screen... but nothing. i do it so much, i pretty much start banging on the keys.....ummm... not sure if that made it worse??
is there anyway i can just reset my phone.... perhaps flash a new rom. I really dont care what is on my phone at this point. phone numbers not saved on sim can be replaced.... i dont care about anything else as far as apps. i just want to be able to use this phone again, whatever it takes. not sure if this is even possible without unlocking the screen first. i am so frustrated i wanna let my rottweiler accidently chew it up, just so i can get a new phone...
i know there is some smarty pants out there that can figure this out... help me pleeeeeeeeeeze!!!!
lovelyxleo said:
Yep, I have tried that.... pushing the end button a zillion times. It use to work before, but now it doesnt. I tried the end button, the call button, sliding over the other keys, just tapping on the unlock keys on the screen... but nothing. i do it so much, i pretty much start banging on the keys.....ummm... not sure if that made it worse??
is there anyway i can just reset my phone.... perhaps flash a new rom. I really dont care what is on my phone at this point. phone numbers not saved on sim can be replaced.... i dont care about anything else as far as apps. i just want to be able to use this phone again, whatever it takes. not sure if this is even possible without unlocking the screen first. i am so frustrated i wanna let my rottweiler accidently chew it up, just so i can get a new phone...
i know there is some smarty pants out there that can figure this out... help me pleeeeeeeeeeze!!!!
Click to expand...
Click to collapse
Nope. Its pretty much hosed. These are classic symptoms of the digitizer cable losing connection with the main board. Pressing the red End key forcefully can sometimes mate the connection back, but otherwise if that doesn't work nothing will. If you're feeling brave, you can take apart the phone piece by piece and reassemble it. That might do the trick. Else, you have to replace the digitizer.
Ok... first of all, what is a digitizer?
Also, is there any way I can connect it to my computer via usb and try to remove the files that i put on there for the rom.... that would just make it a windows phone again. Because Im confused.... is this a phone malfunction or a file issue?
lovelyxleo said:
Ok... first of all, what is a digitizer?
Also, is there any way I can connect it to my computer via usb and try to remove the files that i put on there for the rom.... that would just make it a windows phone again. Because Im confused.... is this a phone malfunction or a file issue?
Click to expand...
Click to collapse
Can you get to the bootloader (stripey screen)? If so, then just flash a stock WinMo ROM from there and it should work.
Well I am able to restart the phone after I take the battery out. So there is a point at the startup while its loading, it says 1-2-3-4 Go Go Go. Not sure if there is anything I can from there.
Oh btw... for a brief few minutes yesterday, the phone did unlock. I got so excited that I started reading all my text messages I missed over the passed 2 weeks and also reviewing missed phone calls. And by that time, the phone locked again. No luck since.
lovelyxleo said:
Well I am able to restart the phone after I take the battery out. So there is a point at the startup while its loading, it says 1-2-3-4 Go Go Go. Not sure if there is anything I can from there.
Oh btw... for a brief few minutes yesterday, the phone did unlock. I got so excited that I started reading all my text messages I missed over the passed 2 weeks and also reviewing missed phone calls. And by that time, the phone locked again. No luck since.
Click to expand...
Click to collapse
Take the battery out, put it back in then hold down the power (end call) and volume down buttons. From here, you can flash a stock ROM via the USB port or flash a stock ROM via your SD card
lovelyxleo said:
Well I am able to restart the phone after I take the battery out. So there is a point at the startup while its loading, it says 1-2-3-4 Go Go Go. Not sure if there is anything I can from there.
Oh btw... for a brief few minutes yesterday, the phone did unlock. I got so excited that I started reading all my text messages I missed over the passed 2 weeks and also reviewing missed phone calls. And by that time, the phone locked again. No luck since.
Click to expand...
Click to collapse
If you remap the call button to the power button, as lung as you don't hit the end key anymore your screen should stay working. It has for me
Sent from my HTC HD2 using Tapatalk
OOOOH... ok how do i remap?
Nigeldg said:
Take the battery out, put it back in then hold down the power (end call) and volume down buttons. From here, you can flash a stock ROM via the USB port or flash a stock ROM via your SD card
Click to expand...
Click to collapse
I have no idea how to flash a stock ROM... any links???
lovelyxleo said:
OOOOH... ok how do i remap?
Click to expand...
Click to collapse
use the attached apk in this post from before and then find the call button inside the program i think its 231 or something like that. Then press apply and voila green key is now your power key
elesbb said:
use the attached apk in this post from before and then find the call button inside the program i think its 231 or something like that. Then press apply and voila green key is now your power key
Click to expand...
Click to collapse
Okk, i can try this... but do i download that file to the computer then to the phone via usb or ?
i see the file, i just dont know what to do with it.
lovelyxleo said:
Okk, i can try this... but do i download that file to the computer then to the phone via usb or ?
i see the file, i just dont know what to do with it.
Click to expand...
Click to collapse
You can eitherdownload to computer, the use adb install to install the program, or download to your phone and use a file browser to navigate to your downloads and install from there. Downloading to your phone is probably the easiest for beginners.
Sent from my HTC HD2 using Tapatalk
i definatly think this is the digitizer problem... same thing heppend to me..
elesbb said:
You can eitherdownload to computer, the use adb install to install the program, or download to your phone and use a file browser to navigate to your downloads and install from there. Downloading to your phone is probably the easiest for beginners.
Sent from my HTC HD2 using Tapatalk
Click to expand...
Click to collapse
Ok, I can try that. But I am still waiting to get this phone screen to unlock. I guess I cant do anything until then.