Serial 1.01 Displayed - PDA2, XDA IIi, 2020i Software Upgrading

Hi
I tried to upgrade my XDA 2i on a Vista machine and it didn't work I should have used my machine with XP - anyways... The XDA 2i now has Serial 1.01 displayed and I cannot get this to reset... Can anything be done?

Just to add - when I connect it to the USB caddy - it changes to USB too.

Ok
I have it working now
I connected my device via the Cradle and it changed to USB
THen i re-ran the flash program and it did not recognise what was on the XDA 2i but it did say what it would put on.
I ran the upgrade program, waited for about 30 minutes for it to complete
Reset the device and it works
Now I just need to have it unlocked as it says network locked when I put my Orange Sim card and then a password
Ideas?

Related

Does anyone know how to unlock mine?

hi to everyone,
i have a locked-SIM t-mobile phone edition which i tried to unlock using a serial cable & the manipulator.
the problem is that the manipulator can't find the device after scaning COM port.
i have checked that the port is not blocked by any program including the synchronization programs but there was no luck.
anybody knows what is the problem in my situation?
Be sure to press SIMULTANEOUSLY both power button AND reset with your stylus. This will bring your T-Mobile to WALLABY mode. After the screen reads GSM OK, connect the cable to your phone and PC and run manipulator.
This should work. I have the same T-Mobile and it worked with mine.
There have been posts with reports where people have had problems connecting to the pda because they have been using a laptop...
I unlocked mine on a SONY VAIO laptop successfully.
hi again,
i have tried the exact steps for unlocking but still the device wans't detected by the manipulator.
the synchronization program also can't detect the device if it is pluged using the serial cable.
could anyone please help me? i couldn't use the phone since 1 month.
Try 75656354
Wasn't there in any thread the hint to uninstall ActiveSync to get the manipulator to work?!?!
Search here in the forum. It wasn't posted as long time ago.
Or just try it when you uninstall.
I ment that there was a problem because active sync wants to connect to the XDA/MDA when connecting it to the serial....
Regards
LumpiStefan
Remember you must have the XDA in bootloader mode.

SOMEBODY HELP ME PLEASE I THINK I'VE BROKE MY XDA IIi

i have an xda IIi an it say's serial v1.01 when i try to put it in the charger it say's usb v1.01 but activesync 4 will not detect it but it does connect to my pc without activesync but i can't install any thing on it. i have downloaded the original software from the o2 website but the installation instructions say it needs to be connected to activesync. what do i do
Hmm...Seem to me you are in bootloader mode serial connection version 1.01 .. Try checking the buttom. As this mode will only come if you press power+reset+navigator buttom.
i have tried soft reset and hard reset but i just can't do anything with it
chill..
download the rom image from o2 here is the link,
http://www.my-xda.com/xda2i_soft.html
put the device into bootloader and put into the cradle and let it do it's magic
simple!
PS, i problem like it i killed mine by messing up the rigistry i was screwed so i did that above and all was okay....main thing is not to panic always think u have the garuntee from o2 so u can take it back...so take it ez!

Dead XDA IIi

Help Tryed updating the ROM lost power now phone in bootload mode any time try flashing i get a 120 country code error
use MaUpgradeUt_noID.exe update again!!
go to the xda website from O2 and download the rom connect you xda to your computer then run the rom on you pc and it will install it's self i had the same problem and this worked fine :lol:
I had a problem while flashing to the 1.04 radio ROM... Basically, my computer bluescreened with an ActiveSync USB driver error (IRQL_NOT_LESS_OR_EQUAL), they're ugly ones.
I had to take the battery out and power the unit back on, it stuck at USB 1.02, but I used the supplied MaUpgradeUt_noID.exe tool and it picked it up fine and is currently flashing (again).
I hope my PC doesn't reboot the sceond time round... If so, time to find someone else with a PC I can use in these University halls

02 XDA Exec tried to update firmware now wont boot

I pluged my XDA exec in to my computer using a usb cable,
I am running windows vista,
I downloaded latest update, but when I run software it said it could not find the device, after a few attempts windows vista said it had loaded the PDA software,
I was finally connected and then started to update the firmware, when vista said it had installed another PDA setup, because I changed cable on usb port,
mean while it ws updating the XDA,
the soft ware never finnised updating and I am left with a screen USB V 1.01
I tried to reset using pressing power on OK button and reset all at the same time,
the screen goes of but come back on with USB at top and V1.01 at bottom
can any one help solve my problems,
I woul be really happy if uou could.
one word "crossbow" latest edition
Two words "Vista...don't".

o2 xda mini S help

i have recently purchased this phone and it is currently locked to t-mobile. I am a canadian resident using rogers network. when i turn the phone on it says NETWORK IS LOCKED PLEASE INPUT UNLOCK CODE. I know this number is generated by the IMEI if i remember correctly..... i just dont know how to go about accomplishing this. also ...my computer isnt recognizing it VIA USB............ i am just so at a loss for what to do ...please someone help
oh yeah the IPL is 1.08 and the SPL is 1.08 when i get to the bootloader screen that is all that comes up
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
zabardast_1 said:
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
Click to expand...
Click to collapse
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .
zabardast_1 said:
As your phone is SIM locked,only t-mobile sim will work on it,but if you want to use any other network sim,you got get your phone SIM unlocked,to do so follow the instructions in the guide and perform the method correctly to get it sim unlocked. Check out this link for the sticky and guide:-
http://forum.xda-developers.com/showthread.php?t=249474
Good Luck
Click to expand...
Click to collapse
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .
hoffmanbiker said:
as much as i would love to do the unlocking myself i cant even get the phone to connect to my computer VIA the USB cable everytime i try i get the " USB device has malfunctioned " so no go there. i cant even activesync it .
Click to expand...
Click to collapse
ok,
If there's a connectivity problem,there are a couple of things to verify it.First which windows are you using,if its winvista,you'll have problems,activesync doesn't work with vista,secondly its not recommended to work on vista.So get on with winXP and also get Activesync version 4.5 the latest.In activesync check the option 'allow usb connections' and in your phone goto settings---> connections and 'uncheck' 'establish all network connections' or something and then try to establish activesync connectivity.If still fails,than,
2. verify usb connectivity with pc, to do so get your phone into bootloaders mode (multicolor screen) by pressing and keep holding down the camera button and simultaneously push the Power On button,your phone will wake up and go into tricolor screen (Bootloaders mode)with ipl/spl showing in red colors.When in bootloaders,connect your phone with pc via usb cable,if a small usb appears at the bottom of the tricolor screen,then its has connectivity,but if doesn't appears,then you have a connectivity problem,so:-
a. either your usb cable is faulty,get a new usb cable and try again.
b. or usb input slot of your pc is not operating,try with a different usb input slot of your pc or even try out on an another pc.
c. Mini usb port of your phone is broken,get it repaired or replaced.
check out all these options and rectify the problem.
Cheers !
ok just to verify i am using wins XP and i have removed entirely activesync, reinstalled it checked to see if there is connectivity VIa boot loader and still it comes back that there is a usb malfunction is there ANY drivers i might need?
dude dont know about your unlocking problem, would be nice to hear that youv solved it... wouldnt it be nice if this world had no problems? but then saying that this forum would not exist... and troubleshooters wouldnt have jobs! lol
a) Unlocking NO...
b) active sync... Bluetooth... just rememberd you cant get in can you? to connect ia bluetooth?
email me privately on [email protected] and i may be able to help you if not ill find a way... a bit lost in the head (Attention Dissorder) cant focus...
sori
Sham

Categories

Resources