Database Users

Is there a basic large PHONE pad available ?

Just wondering if there is a very basic phone pad skin available for the M3100...
Just a single line for the number, maybe 2 if the number is too long so the digits don't get too small...
Large buttons for numbers, no video buttons etc just numbers, no need for the TALK/END sort of stuff as the hardware green/red buttons work fine..
Just looking for something that people with wide fingers can use without a stylus....
If there isn't one, what do I need to do to create one ??
Searched the forum but can't really find anything of use on the subject.
Many thanks Phil

I found that the vista theme on Paulya.com worked wonders for this:
http://www.paulya.com/etenskins.htm
http://www.paulya.com/Projects/Eten_Skins/Vista/Vista_Trans/Vista_Trans_Origin.zip
I am tempted to go back to this dialer as it was so good on my Wizard - just lacks a video button.

Hi, Thanks for that.... Managed to get the skin to work that is included with the eten dialer... I also downloaded the eten_ans etc .zip and put it in the windows dir on the phone after extracting it.. can't seem to find how to enable it (am I thick or something... Don't answer that !!)
The only thing I didn't do was use active sync... I copied the extracted file to my memory card then copied them over from that as the PC I'm at, at the moment doesn't run activesync 4 or higher (horrible win98 se machine..
Any comments much appreciated
Phil

I jast ran the cab file from my storage card and it installed perfectly. I did have diffulculty installing additional skins though.

Hi Phil,
There is a CAB on the FTP here which gives you the phonepad software EXACTLY like in older HTC phones: ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
I installed it and it's great!
Gavin.

GavinN said:
Hi Phil,
There is a CAB on the FTP here which gives you the phonepad software EXACTLY like in older HTC phones: ftp://xda:[email protected]/Hermes/Tools_and_Programs/Phone Pad - English Only.CAB
I installed it and it's great!
Gavin.
Click to expand...
Click to collapse
Great - Any chance of a screenshot?

Have you guys seen Buzz's Virgy DeepOcean Dialer for WM5 QVGA?
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
http://buzzdev.net/component/option,com_remository/func,fileinfo/id,335/
V

Hi sorry to be thick
ok i downloaded the buzzdev.net qvga dialer
but how does one install it. Do i just run the cab via activesync or run it on the vario2 or what sorry about the stupid questions
also i download the splash screen stuff from there too how do i make that appear instead of the default tmobile one when starting up
thanks
JEREMY

Just stick it onto your device, tap it to load it, install and then when prompted reboot (just hit OK and it'll do it) - the PIN entry screen remains the same, but the main dialer screen changes.
It looks very nice, and I'd use it all the time - except there's no way to use the T9 dialing feature which the regular dialer offers (where you can just type the name of the person you wish to call and it shows all valid entries from the list, so e.g. if I wanted to call my Mum - whose entry is Mum, ironically - I'd type 6-8-6 and then hit Dial). It's quite sad to see that this feature is missing, probably for a good reason as it does cause a fair bit of slowdown on my phone - more than on my old Alpine! - but I still use it all the time and I'm going to have to uninstall the skin because I really neeeeeeeeed that feature. :/

ok if I wanted to get the original tmobile dialer back then all I would have to do is uninstall it then? cool
how would I install the splash screen then?
Jeremy

Vijay55,
I installed it OK, the large buttons are awesome, however I have had the following problems:
1) DTMF (Tones) don't work properley when accessing voice mail etc (UK T-mobile) or any other press x application
2) Jog Dialer not active
3) No Smart dialling
Am I doing anything wrong?
Have had to pull it off becasue of the DTMF problem, I've installed it, removed it, rebooted, changed the options etc, nothing seems to fix it.

Fixed it!!
Though I am now using the Eten dialler with smart dial support and one of Paulya's Dark Blue Glass skins.
Editing the registry and setting the value to 0, then soft reboot and dtmf tones are working.
Setting it to 0 wasn't the obvious choice, and previously I hadn't soft rebooted.
Found the following from dhushy in:
http://forum.xda-developers.com/showthread.php?t=276700
Worked it out. For anyone with a similar problem, use the registry editor to locate the following key:
HKLM,"Drivers\BuiltIn\RIL","EnableDTMFSupport",0x0 0010001,1
Change the value from 1 to a 0 and Bob's yer Uncle (for non-British readers that means everything will be cushty - see Only Fools and Horses for a contextual translation)
Did this and I was able to manipulate my voicemail messages as normal.
Click to expand...
Click to collapse
I am on T-Mobile UK.

Stand Alone Eten ZoomSMS !! working

i remember someone ask about how to modified ZoomSMS to working alone without scenerios and callfilter and its own missed call history(This apps use missed call history of itself and may intefere with phonealarm).
Concept is :
1.Put phoneservice.exe in Windows\ and put shortcut to startup folder and reset to let it resident in memory.
2.Remove taskbar icon by change this key.
HKLM\ControlPanel\Eten\ScenariosOption\Showicon
Change dword value from 1 to 0
Anyway,u may left it show but when u tap on it,it'll show error about missing something.
3.after 1 and 2 ,SMS-alert part on ZoomSMS is going to work fine but the Missed call alert,when u click on blue Missed call item it'll show error about finding quicklinksetting.exe (This is app. to run its own missed call history).
So u just grab tCallHistory.exe (wrote by someone here,i think) rename it to quicklinksetting.exe and put it in Windows\.Now see it work

use the NEXT VERSION!

screen shots mate?pls

A little trick to install very very quickly....
The little icon in the taskbar remain...however you can tap on it but do nothing!
No bad...
Just download, install and soft-reset!
P.s.
I have also replaced "quicklinksetting.exe" with another (better) one....
This little App simply display (using a beauty icon) on Today the missed calls and the unread SMS.....it alsto open the received sms in a proper magnified windows...
...sorry my bad english but at this moment i'm writing in 3 different language -I hate my university...eheheh...

jaceuk said:
screen shots mate?pls
Click to expand...
Click to collapse
http://www.etencorp.com/products/Communication/software.php?sid=17
this ought to be it, I guess. still, I would have to write on the small small tiny font sms writer, right?

Finally...this is an "EtenPack"...
the only differences is that this cab install the REAL "scenarios" to change the Phone's Profiles.....you can access to this program from the icon in the Today's Taskbar or from an icon in "Programs".....
Using scenarios u can configura 5 profiles!

Screenshot added
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Thanks AX3L for repack and make it better

look this !!!!!
http://forum.xda-developers.com/showthread.php?p=1248944#post1248944

Thanks AX3L

hi there,
do you know what's the shortcut path for Eten's ZoomSMS blue icon?
where does it redirect to?

Excuse me, work on my HTC P3300? Thank you

it works! thanks a lot.
i couldn't use the one made by AX3L as it has speed and response issues with my BA (on WM5, Aku 3.3).
teddyking said:
i remember someone ask about how to modified ZoomSMS to working alone without scenerios and callfilter and its own missed call history(This apps use missed call history of itself and may intefere with phonealarm).
Concept is :
1.Put phoneservice.exe in Windows\ and put shortcut to startup folder and reset to let it resident in memory.
2.Remove taskbar icon by change this key.
HKLM\ControlPanel\Eten\ScenariosOption\Showicon
Change dword value from 1 to 0
Anyway,u may left it show but when u tap on it,it'll show error about missing something.
3.after 1 and 2 ,SMS-alert part on ZoomSMS is going to work fine but the Missed call alert,when u click on blue Missed call item it'll show error about finding quicklinksetting.exe (This is app. to run its own missed call history).
So u just grab tCallHistory.exe (wrote by someone here,i think) rename it to quicklinksetting.exe and put it in Windows\.Now see it work
Click to expand...
Click to collapse

Installed didn't work...
I installed this from here:
http://www.freewarepocketpc.net/ppc-download-zoomsms.html
It works but the icon gets hidden in the photo dialer tab of SPB Mobile Shell. Anyway of getting it out of there? Thanks.

wont work on wm6
i tried to install this program about four times and it still wont work can sumone please help me

glennh627 said:
i tried to install this program about four times and it still wont work can sumone please help me
Click to expand...
Click to collapse
dude...read the 1st post it wont work on wm6

ok so r there any programs that do this on wm6 ?

I'm interested in an app similar to this for WM6, too.
Does anybody can help?

glennh627 said:
ok so r there any programs that do this on wm6 ?
Click to expand...
Click to collapse
Sylvia said:
I'm interested in an app similar to this for WM6, too.
Does anybody can help?
Click to expand...
Click to collapse
The EtenPack works good with the " Artemis Vanilla 1.0 WWE - 5.2.1908 (Build 18505.0.7.0)" but not the stand Alone ZoomSMS
But doesn't work with "Artemis Touch 2.1 WM6 WWE ROM"

Sylvia said:
I'm interested in an app similar to this for WM6, too.
Does anybody can help?
Click to expand...
Click to collapse
Same with me. Does anybody know something like ZoomSMS just for WM6 on AsusP535?
PS: I just installed it on my P535 with WM6 and it works

try this one
i have this one who works good on my hermes try

[UTIL]HTCustom updated to support Trinity

I've updated my HTCustom application to now support the trinity as well as the hermes. You can find it here:
http://shadowmite.com/forum/viewtopic.php?f=28&t=2231&p=7890#p7890
--------------
HTCustom CUSTEL & Shadowmite Collaboration
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Code:
Whats Good?
- Thin Scroll Bars
- Short Scroll Arrows
- Live Searches Via Google
- Remove battery/comm manager from tray
- Clock Display (clock, date, nothing, both, battery)
- Enable Time Zones
- 3g video dialer
- enable dtmf support
- disable in call volume beep
- gprs/3g disconnect/timer
- connection always on
- disable sms sent notifier
- change bt name
- transfer files via bt/irda
- improve a2dp sound
- Disable menu animations
- modify glyphcache
- enable file system cache
- modify FATFS & file system filter cache
- pie card cache device/sd
- navigate pie w/ dpad
- Hermes Keypad Layout
- Show/Hide Sim contacts
- Disable Security warning
- Mount Ext Rom
- enable/disable hsdpa
- xml/provxml loader
- cab loader
Version 1.8:
Fixed a bug to now support bepe's newer roms for trinity
Version 1.7:
Fixed the A2DP enhancements to allow the old method, and the new method. If set to usejointstereo, set bitpool to none and the samplerate will be set!
Version 1.6:
Now works on Trinity as well
Version 1.5:
Sorted the cab directory before launching them...
Version 1.4:
Fix the Time/Date/Both/Battery option to work correctly for battery.
Version 1.3:
Added version to about screen. Also fixed the A2DP fix to change maxsupportedbitpool also. Lastly added 3 time formats to choose from.
Version 1.2:
Fixes the last digit of the short date tag on the taskbar from falling off and allows you to create your own format if desired. If you don't find the date is all fitting, add another space to the end of the date textbox!
Version 1.1:
Added the automated CAB loader stuff and some other fixes
Source and more info can be found at:
http://shadowmite.com/forum/viewtopic.php?f=28&t=2231&p=7890#p7890

w00t thanks Shadow!
*edit*
Got an "unexpected error has occured..." when saving the config.

darkjedi said:
w00t thanks Shadow!
*edit*
Got an "unexpected error has occured..." when saving the config.
Click to expand...
Click to collapse
Could you paste the first like 2-3 lines of the error details here?

Put up one more update to fix the a2dp stuff for our newer kernels that usejointstereo works properly on!

Thanks shadowmite!! I've been waiting for this for ages

darkjedi, anytime you can get me a just those first lines of your error I'll be more than happy to fix it for ya... If ANYONE gets a error, I need to know how you got it, what rom you're running, and the first 2-3 lines of the error detail. Thanks!

I tried the 1.7 and it seems to have fixed it. Or I haven't seen it since, and I've saved/reset with it a few times now.

Had a issue after installing this application as to when I opened a messageing (inbox, outbox, or any other) the window automatically opened to the bottom of the message, meaning I had to use slider or up buttom to scroll to the top of the message to read.
There were two other issue which I'm not sure were relating to this App, just so happens that they appeared after the app was installed, but gone when removed.

Jumping to the bottom of your mails is a sideeffect of the hack to enable scrolling in iexplore...Nothing you can do besides disable navigating with d-pad...

Installed, looks pretty cool. No bugs/errors so far.

Hey shadowmite
Long time no see, anyway nice application..I'm loving it
Works fine on WM5 !

Shadowmite said:
Jumping to the bottom of your mails is a sideeffect of the hack to enable scrolling in iexplore...Nothing you can do besides disable navigating with d-pad...
Click to expand...
Click to collapse
Hi
I have the same problem. I did a hard reset but it wasn't completely resolved. Just that now it went up to the beginning of the message but not the top of the message.
Can't remember whether this happened after I installed the HTCustom.. But is there anyway to check whether any of the registry was amended and how to amend it back? Would hard reset actually reverse the effect of installing the HTCustom?

Shadowmite said:
Jumping to the bottom of your mails is a sideeffect of the hack to enable scrolling in iexplore...Nothing you can do besides disable navigating with d-pad...
Click to expand...
Click to collapse
Ah OK, I did use the Nav with the D-Pad feature". I re-install it and see how goes..............
Thanks for letting me know.

Hey, this is a great little application, thanks a lot. Dark Jedi told me about this and he was right, it has helped me fix a few issues. Great work.

Bug Report (a tiny one, but nontheless...!)
Hi Shadey,
Could you please fix HTCustom so that it saves (or re-reads) the last status of "Short Date Format" in the UI tab? Being on this side of the pond, we have the date in the correct format (dd/MM/yy) - unlike you guys! (joke!) ...But every time I go into the app. to change something else I have to remember to "fix" the date format as you always default back to the dodgy way round! Tar very much!
PS. Scrolling the page up when the keyboard pops up while changing the aforementioned setting is definitely overkill and not necessary... but it *would* be nice - only if you're feeling flush, like!!!
Cheers matey.

One of the things that bug’s me with the scroll wheel and nav buttons is the amount of scrolling that happens each press/scroll.
I want to be able to scroll up and down the page in IE and email (not to and from hyperlinks) with the scroll wheel. Currently it jumps a screen at a time. Can the scroll wheel be set to smooth scroll, the same way you can with a desktop pc mouse (a few lines at a time).
This would be a good addition to this app (haven't used it yet, but haven't read that it can do it).

Thanks a lot man, great work !!

wm6
Hi Guys,
Does this work with WM6 Trinity
Thanks

sachin1778 said:
Hi Guys,
Does this work with WM6 Trinity
Thanks
Click to expand...
Click to collapse
Yes it works on WM6 Trinity, I just install it, it works perfectly

I use the htcustom love it but does not work with WWE
Hi I love your htcustom 1.7 but does not work with the WWE (bepe's rom) .18 which is the doped official release of WM6.. any suggestions on what to do to make it working?
Thanks,

Polaris Project Glass 0.2

Well its time for the long awaited 0.2 release!
its a hybrid with xip 19915 and imgfs/sys of 19585 from the htc diamond.
all oems have been updated to latest. random access and end key stayed same version(new end key airplane mode would not work and new random access would not work)
hopefully i fixed the bugs in 0.2 and adressed any requests.
Whats in full? here is the list:
manilla sip
htc video telephony and phone canvas(same as in 0.1, bepes rom, udk's rom, etc..)
htc task mananger
streaming media
htc startup animation engine and gif
long press end key
jbedjava
large start meny
enlarge title bar
connection setup
bt sap
bt ftp
adobe pdf 2.5
audio mananger
htc home
htc touchflo+cube
voice recorder
htc album
bt bpp
audio booster
quickgps
random access
usb to pc
opera 9
tomtom
sprint home plugin
app to date
call firewall
dotfred task man+reg edit
file dialog/save as dialog changer
group sms
screenshot app
mccmobilefinder
nbstatce
pim backup
pocket rar
putty
sms notifier
softkey app
syncrotime
tcpmp
total commander
vncview
vxutil
windows live(the app not the messenger)
wktask(not the latest but has less bugs than latest)
zsirc
google maps
Screenshot (thanx academic!):
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Download

Future Plans:
a config app(still under development by cmonex)
a new dialer(friend is still working on it)
get the new diamond black quick gps style/skin into the rom(i believe its almost done/done)
get the new volume control app to work in qvga
get the new title bar to work in qvga.
Known Issues:
blank contact info page
qwerty manila layout doesn't work
phone settings wont close/save changes(hit start menu/today and it will get you out though)*fixed in post 40 and will be in next version*
app to date needs to be updated and so do server side and on device texts to reflect new version of rom.
Note: vanilla is ready but since the full has these bugs then i will fix them on full and vanilla and release a new full and vanilla rom.
Screenshot Continued(thanx academic!):

Thank YOU!

I am waiting for the screenshots first.

athanaso77 said:
I am waiting for the screenshots first.
Click to expand...
Click to collapse
i hope somthing new in this rom

Thank you for your hard work!
Maybe a bug: I can not exit from Phone settings....only soft reset helps...

Thk I wait for the FRA release now.

Screenshots please...

fktsndr said:
Maybe a bug: I can not exit from Phone settings....only soft reset helps...
Click to expand...
Click to collapse
I had the same problem too. And resetting (of course) loses the changes you were trying to make in Phone Settings.
I am also wondering why I can't apply any TSK - the background always remains blue

Spanish
Is going to be a Spanish version?

SWEET D/L
good luck to you (and to us)

Great stuff!
Finally a ROM with TomTom build in.
Currently testing it. No problems so far!
Keep up the good work boys.

Can you consider to aply this HTC Diamond keyboards 12 languages qwerty t9 supported by gullum on your next version so we all can enjoy the xt9 in our own language whit out any fuzz
http://forum.xda-developers.com/showthread.php?t=392197

fktsndr said:
Maybe a bug: I can not exit from Phone settings....only soft reset helps...
Click to expand...
Click to collapse
I have the same problem but I can open the today screen and it will save the settings. just go to start and pick today. I have been able to make changes and save them this way. So far this is working great. Only this small problem. Good work.

omaga said:
Can you consider to aply this HTC Diamond keyboards 12 languages qwerty t9 supported by gullum on your next version so we all can enjoy the xt9 in our own language whit out any fuzz
http://forum.xda-developers.com/showthread.php?t=392197
Click to expand...
Click to collapse
That would be nice!

Contact Info
All was working great until I went into contacts. While they all transfered fine if you open one and look at the details they are blank. The picture and all other info does not display. Just a bland screen.

Screenshots please !

screenshots and more detailed report PLS!!!Thnks

the rom looks not bad many programms and fast .
pos leme sta agglika mia xara .. one happy ? !

would someone have the heart an post screen shots plaese!!!!

[APP]GSen (SKKV Software) - Auto Rotation with G-Sensor support for many applications

GSen Version 1.8 - Freeware
Tested on HTC P3700/HTC Touch Diamond/o2 Xda diamond/T-Mobile MDA Compact IV/HTC Raphael (Prototype)/HTC Advantage X7510 Windows Mobile UMPC (by unwired® & Arne Hess)
Not working on HTC Touch Pro with ROM version 1.90.0.0 or newer and HTC Touch Diamond with Telus ROM.
Please read the readme file for more details.
{
"lightbox_close": "Close",
"lightbox_next": "Next",
"lightbox_previous": "Previous",
"lightbox_error": "The requested content cannot be loaded. Please try again later.",
"lightbox_start_slideshow": "Start slideshow",
"lightbox_stop_slideshow": "Stop slideshow",
"lightbox_full_screen": "Full screen",
"lightbox_thumbnails": "Thumbnails",
"lightbox_download": "Download",
"lightbox_share": "Share",
"lightbox_zoom": "Zoom",
"lightbox_new_window": "New window",
"lightbox_toggle_sidebar": "Toggle sidebar"
}
Video Sample 1 (by comic0)
Video Sample 2 (by Edward J. R.)
Video Sample 3 (by unwired® & Arne Hess)
GSen Download
Donate
Version History
V1.8
- Numbers of attempts increased to initialise G-Sensor. Can be helpful if startup problems exist.
V1.7
- Fix for #poweroff180(0|1)
V1.6
- #poweroff180(0|1)
Power off if you rotate device head over heels
- Configurable indicator on topbar (check 3rd screenshot and 2nd screenshots for settings. Further details in the readme file.)
V1.5
- Probable fix with open sensor error(3) from startup, eventually depending on version of ROM/AKU
- CFG editor can be closed by tap "ok"
V1.4
- Probable fix for locked devices. If device is locked, the screen will not rotate, eventually depending on version of ROM/AKU
V1.2
- "Save bug" fixed
V1.1
- In #window can be defined process name [as example for exlude phone need add #window(cprog.exe)]
- Edit->Select process name menu item added
- #fdscreenoff(0|1|2) 1- screen off / 2- suspend device
V1.0
- CFG Editor : New menu item, Edit > Restore default to restore the default settings
V0.9
- Cab file create shortcut GSenToogle.lnk
- CFG Editor : New menu item - File > Startup to create/delete startup shortcut
V0.8
- Fix for screenoff on TF3D screen.
- About, show you the programm version/status
V0.7
- Small fix for the #fdscreenoff(0|1) command
V0.6
- New command: #fdscreenoff(0|1) If it is enabled, program will switch off the screen if you put device with screen (face) on bottom.
V0.5
- Menu to select window class, name in config editor
- New commandline parameters #load, #toggle added
- GSenToggle.lnk added
V0.4
- Update with new exlude list
- 3 different shortcuts available
V0.3
- First release

This is really cool. The description in the first post didn't say too much what it is about. I thought I would give it a try. It really does rotate the screen when you rotate the phone - in any program. Fantastic.
An it appears in AppToDate. Even better.

Sometimes, it is not necessary to write a novel.
The topic title says enough.

Nice find..... Its just brilliant.

very good release!!!
3 ask for you:
can I rotate the main screen (home, contacts,photos, etc..)?
this program has autorun?
can I exclude one program to rotation?

Please read the readme.txt and you will find the answers.
You can add shortcut in startup.
To exclude app use #window parameter.
To rotate TF3D home screen make no sense, because it is designed for portrait mode.

hi, i've tried this program and works great.. MANY MANY THANKS!!! i just added a shortcut to windows/start so it loads on startup.
i understand that #window parameter can be used to exclude one program, but i have a couple of questions:
1- can i add as many exceptions as i want??
2- if answer is yes,how should i write them?something like this?
#window(explorer.exe)
#window(commanager.exe)
thanks!!!!

awesome !
I was waiting for this one, thnx !

jpresencia said:
hi, i've tried this program and works great.. MANY MANY THANKS!!! i just added a shortcut to windows/start so it loads on startup.
i understand that #window parameter can be used to exclude one program, but i have a couple of questions:
1- can i add as many exceptions as i want??
2- if answer is yes,how should i write them?something like this?
#window(explorer.exe)
#window(commanager.exe)
thanks!!!!
Click to expand...
Click to collapse
nevermind, i got it... Sorry!!!

jpresencia said:
nevermind, i got it... Sorry!!!
Click to expand...
Click to collapse
Would you mind sharing?

i wouldnt mind, but actually what i thought was wrong.
i wanted to exclude commmanager, dialer screen and the screen you get when someone is calling you.
so i tried with:
#window(commanager) #window(cprog)
that didnt work, so any help would be appreciated...
How to disable rotating for commanager and dialer/answer screen????
Thanks!!!

thanks! here we have the first app for the G sensor.
what about a new app for the Gspot????? it has to be combined with vibrate function

Awesome app, works nice with the TLR 405 rom, rotates all my apps perfectly, including TomTom
Would love to see this app or similar cooked into newer roms
Wonder why HTC didn't do something like this

Niiiiiiiiiiiiiiiiiiiiiiiiice
So cool.
Thanks for you work

This is a great software,it is very useful,
but I have problem when i use internet explorer,
the bookmark page is unreadable,
and also the address field,
all the characters overlap.
Hope you can find out the cause of the problem.

uaon99 said:
This is a great software,it is very useful,
but I have problem when i use internet explorer,
the bookmark page is unreadable,
and also the address field,
all the characters overlap.
Hope you can find out the cause of the problem.
Click to expand...
Click to collapse
mine's OK, did you change any settings on fonts btw i'm surprised u still use ie
i'm using TLR's ROM

uaon99 said:
This is a great software,it is very useful,
but I have problem when i use internet explorer,
the bookmark page is unreadable,
and also the address field,
all the characters overlap.
Hope you can find out the cause of the problem.
Click to expand...
Click to collapse
This problem has nothing to do with our tool.
If you have this kind of problem, you will have it by using another rotation (manually) tool too.

i dont understand the readme how to make a working shortcut and not ask to unload...can someone please make a version i can copy and paste to...?
and it would also be nice if this worked in touchflo 3d.

I really like this one as mentioned before...
Onlt the rotation comes with a lag. It just take 2 or 3 seconds the rotate the screen. Is there any possibility this can be done faster or is this just antoher wm thing?

work fine!!!
thanks!!!!!!!!