Database Users

my wing is stuck on the colorful ruu screen

i tried to flash the norwegan blue touchcube and the it cut off...error message displayed and i tried to flash the shipped rom and then im stuck on the ruu screen after flash was unsucessful and here i am.
can someone please help me undo what i have done or guide me through fixing it?
-thanks-

you need to flash the original RUU for your country.
Here is a link to the Wiki Herald with official RUU's for you to use: http://wiki.xda-developers.com/index.php?pagename=Herald_Upgrades
Find your RUU, hook your phone up via usb to your computer in "guest" mode on activesync*, get into bootloader by pressing and holding camera button and sticking your stylus into the reset hole. run the exe of the RUU from your PC, follow the prompts, and flash the RUU
*if a profile is found, click delete device profile from file menu in activesync

I get the colorful RUU screen as well. Mine says:
IPL 4.10.0002
SPL 4.70.YANG
When I plug it into the USB active sync wont connect. I don't know how to do anything. Please Help.

Flashing rom uspl and no image file

Hi All,
I have tried searching for the answer to this question and cannot find it, though I am sure I wont be the first to have had this problem.
I am trying to flash a new rom on my touch HD, have tried two different ones - duttys and black pearl. I have managed to get the upsl to work in the bootloader but i cannot get a rom to boot from the SD card. I have followed the instructions on the pages with the roms (same in each) and all i see is a screen flash up after running uspl saying "no image file" then it goes back to the bootloader screen.
In order to get out of bootloader I have to remove my battery which i assume is normal and then it goes back to the normal spl.
I am pulling my hair out on this one - and I dont have much to pull on!
I didnt think it would be so hard with all of the instructions about!

What want you do?
What stage has you done?

I wanted to load duttys rom using upsl but unfortunately I couldnt get it to work so I used the program that comes with the rom to load it in without using bootloader.
I had to load on Olinex to make it work

I had a similar thing the other day when I was having a blonde moment. Renamed the image file BLACIMG.nbh, instead of just BLACIMG......so the actual file name when I looked in to it was actually sitting as BLACIMG.nbh.nbh
Once I'd deleted the .nbh extension out of the file name I renamed it worked.

deafpotato said:
Hi All,
I have tried searching for the answer to this question and cannot find it, though I am sure I wont be the first to have had this problem.
I am trying to flash a new rom on my touch HD, have tried two different ones - duttys and black pearl. I have managed to get the upsl to work in the bootloader but i cannot get a rom to boot from the SD card. I have followed the instructions on the pages with the roms (same in each) and all i see is a screen flash up after running uspl saying "no image file" then it goes back to the bootloader screen.
In order to get out of bootloader I have to remove my battery which i assume is normal and then it goes back to the normal spl.
I am pulling my hair out on this one - and I dont have much to pull on!
I didnt think it would be so hard with all of the instructions about!
Click to expand...
Click to collapse
Did you remove storage card before entering Bootloader screen? Put storage card in after Bootloader is up and before opening USPL.

USPL HowTo
Sorry to ask again.
I had the same problems.
As I couldn't do with USPL (just did not find reasonable step-by-step instructions), I used OliNex HardSPL which worked fine.
But now with new ROM updates, I face significant problems with display color and radio not working.
So, I actually definitely need and would like to ask somebody to take the time to post ...
step-by-step instructions on how to use USPL
PLEASE !

USPL HowTo
Obviously, I just missed out one point and needed to change another.
But for those in the same situation:
Probably only works on Windows XP, didn't work on my Vista PC.
(1) Download the latest USPL (currently 2.5)
(2) extract anywhere on your computer
(3) Go to ActiveSync properties and disable "Allow USB Connections" option
(4) Turn off your device (long press "Power" key or remove/replace battery)
(5) then enter SPL bootloader mode (tri-color)
- Blackstone: when device turned off by pressing and holding "VolDown" key plus "Soft Reset" simultaneously
- did NOT work for me: by pressing and holding "Power" and "VolDown" keys simultaneously.
(6) Connect USB cable and make sure "USB" label appeared in the white portion of the screen on your device.
(7) start / run "cmd" (DOS console) on your desktop PC
(8) Execute blac_uspl.exe in DOS window
current status and any error messages USPL encounters will be displayed in the console window.
(9) If everything goes well, your device will restart and SPL version label should read "1.15.USPL" indicating that USPL was loaded successfully.

You ever read through the USPL thread?
stepw said:
10. How to use it?
Download the latest USPL attached to the second post of this thread and extract anywhere on your computer.
Go to ActiveSync properties and disable "Allow USB Connections" option. Turn off your device (long press "Power" key or remove/replace battery), then enter SPL bootloader mode (tri-color) by pressing and holding "Power" and "VolDown" keys simultaneously.
Connect USB cable and make sure "USB" label appeared in the white portion of the screen on your device.
Execute blac_uspl.exe; current status and any error messages USPL encounters will be displayed in the console window.
If everything goes well, your device will restart and SPL version label should read "1.14.USPL" indicating that USPL was loaded successfully.
If SPL version does not include "USPL" or if the screen is black, soft reset and try again. If "USB" label disappeared and did not reappear, reinsert USB cable.
You can then start RUU update to flash RUU_signed.nbh. Once RUU update is completed, device will restart using regular flashed SPL.
If you want to flash from SD card instead, make sure your SD card is not inserted when you enter the bootloader originally.
SPL will try to install it and would fail if blacimg.nbh is not signed by HTC. Insert the card after "USB" label comes up in SPL but before running USPL.
You can run "blac_uspl.exe ?" to get command line parameter help. Only 1 parameter is accepted and that is the name of an SPL file you want to load. You can load an MFG SPL or HSPL. USPL automatically takes care of allowing unsigned/cooked ROM flashing with any SPL you use.
Click to expand...
Click to collapse
Should be just clear, isn't it? Have used it a few times, without any problems ...

No, it probably wasn't clear enough.
At least it didn't work for me.
see the changes I applied above (plus minor additions)

remove the memroy card!
the first time i tried the upgrade, it failed... because my memory card was inside the phone. worse, the mem card contains the rom upgrade file.
pls remove the memory card first.. then run the ruu update.
after which, it will state that rom is 1.15.
then can insert memory card (only if u see the USB word on your phone)
then can re-run program.. and update firmware..

I have experienced this problem where no image file was found when flashing from UPSL. I think this is some kind of random **** that happens. I have flashed countless ROM with this method and sometimes this **** just happens without any reason.

hi, how come my tri-color bootloader only shown "Serial" in the white portion of the screen? Is there something wrong with my HTC HD phone? I try to reflash the ROM thru this way since ActiveSync cannot detect my HD. My HD phone only shown battery charging whenever I plugged in the mini-USB cable into the computer.
Anyone can enlighten my issues? Thank you in advance!

I met the same issue, and I solved it by re-formatting the card using FAT32.

MOD EDIT
I'm closing this thread as dummies guide, USPL & HSPL threads already exist.
If your having still having difficulties post your query into relevant thread. I'd suggest you start with dummies flashing guide thread.
Thread closed

[Q] How to get back to stock?

How do I revert a T-Mobile US HD2 back to stock as if it were out of the box? I used this method. ( http://forum.xda-developers.com/showthread.php?t=894423 )
I have looked through thread upon thread and cant find detailed instructions. Please if someone could help me it would be much appreciated.

power off
press hold and keep holding vol down
tap power
keep holding vol down till bootloader appears (three colour screen)
connect to usb
connect to pc
when serial changes to usb
run hspl3
choose 2.08.0000
when phone restarts immediately hold vol down
phone will re enter bootloader
spl should now read 2.08.0000
connect to usb
connect to pc
when serial changes to usb
run any t mobile stock rom (2.10 2.13 3.14).exe

Thank you for not being a **** or making snide remarks.

stuck after installing MAGLDR while installing NAND

oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?

Milan Geek said:
oh i got a serious problem
after I install MAGLDR 1.11 my HD2 it succeed and did reboot and then it did stuck in white screen with hTC green log.
What to do? It cannot connect it to the sync with computer when it is with this screen. I tried so many time to reset it (with pressing long the power bottom) but I didn’t get MAGLDR 1.11 boot menu, so I cannot proceed to the next step which is installing NAND
My HTD looks like with no operating system only with white screen with hTC green log, What to do? Any help PlZzZzZzZzZzzzz?
Click to expand...
Click to collapse
Do you have 2.08HSPL on your phone?
Hold the volume key down while you turn on your phone, then you will see the tri-color screen. and the hardspl you have.

I suggest you follow this
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.

dirn1111 said:
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
Click to expand...
Click to collapse
thank you dear, i will try it today when i get home and i wish it will work

a3r0n1 said:
Do you have 2.08HSPL on your phone?
Hold the volume key down while you turn on your phone, then you will see the tri-color screen. and the hardspl you have.
Click to expand...
Click to collapse
i have 1.42 !!
i cannot sync with the PC, how to flash 2.08 now?

Make sure you have the right hspl and radio.
Sent from my HTC HD2 using XDA App

dirn1111 said:
Make your you have flashed HSPL 2.08.
it can be found easily using search option
after that boot it to tri-color screen.
( hold volume down key and boot your phone)
Sync your phone with pc using active sync
then down there on your phone screen will say USB
now find
"Task29 provided by doloop"
in the forum.
use that to flash everything from your phone.
after that it will automatically boot into white htc logo screen and not proceed
(due to there's nothing remaining.) just ignore it and
reset your phone while pressing volume down key to enter tri-color screen
now flash mgldr.
after that your phone will boot into mgldr
then follow the instructions on forum about nand builds
PS/If you are using XP you have to make your when usb flasher
it says wait usb...usb(connect via active sync) then uncheck "the allow usb connection" on active syncs connection settings. then proceed will rom installers
hope this will help.
Click to expand...
Click to collapse
the problem that i have hspl 1.42
now i cannot sync with the PC, how can i flash hspl 2.08?

Boy, you never read, do you!
go there:
http://forum.xda-developers.com/showthread.php?t=915839
Don't panic, take it easy...

MAGLDR requirements:
HSPL 2.08
RADIO that supports 576MB RAM
Milan Geek, I know I am going blind, but seriously?
YOU DON'T NEED SUCH BIG FONTS
This is what you need to do:
Unplug battery to turn device off
Put battery back in to device
Hold the Volume down button, do not let go
Press and release the power button to turn on the device
when you see the RED/GREEN/BLUE screen, plug in your USB cable to phone and computer
Run HSPL3 and update to HSPL 2.08
When done, the phone will Reboot, when screen turns off, press and hold the Volume Down button, if you don't, you will have to remove battery, put it back, hold the volume button, then turn on the device again.
when you see the RED/GREEN/BLUE screen again, make sure USB cable is connected to phone and computer install RADIO 2.15.50.14
Now MAGLDR will work.
If these instructions do not work,
MAIL IT TO ME, AND I WILL CLICK ON THANK YOU BUTTON
The phone is too complicated, I will find it a nice home.

Doesn't Work

nimbooz said:
Doesn't Work
Click to expand...
Click to collapse
What doesn't work? If OP just takes his time to read and understand all wat d above posters have posted, then he'll surely successfully get android on his device...The steps above have been used by thousands over and over again WITHOUT fail!!!...

Same problem. I have reinstalled around 20 times following steps you say and still stucks in white screen.

sanroman said:
Same problem. I have reinstalled around 20 times following steps you say and still stucks in white screen.
Click to expand...
Click to collapse
It's a simple process. If you are getting stuck at white screen the chances are you are not doing one of the first 2 steps as below.
FIRST: You have to install 2.08.HSPL (no other HSPL version and not an spl ending in .0000). Check in bootloader that you have 2.08.hspl NOT 2.08.0000.
SECOND: You have to install a 2.xx.50.xx radio (it has to be a .50 radio and not a .51 radio). Use 2.08.50.xx or higher .50 radio.
THIRD: Install magldr from bootloader by running the romupdateutility file.

I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?

sanroman said:
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
Click to expand...
Click to collapse
Have you tried going all the way back to stock winmo rom and starting the whole process again?

I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?

sanroman said:
I know. Please Believe I have 2.08.HSPL and 2.15.50.15 Radio installed several times without errors but same result.
Could be a HW problem? any other solution?
Click to expand...
Click to collapse
You posted this above in your previous post already. I was now asking if you have tried going all the way back to the stock winmo rom, ie to return the phone to its original state and then start again from the beginning?

nimbooz said:
Doesn't Work
Click to expand...
Click to collapse
I had the same problem and it worked.....just follow the steps the guys described below and u will succes :-D

LiFE1688 said:
MAGLDR requirements:
HSPL 2.08
RADIO that supports 576MB RAM
Milan Geek, I know I am going blind, but seriously?
YOU DON'T NEED SUCH BIG FONTS
This is what you need to do:
Unplug battery to turn device off
Put battery back in to device
Hold the Volume down button, do not let go
Press and release the power button to turn on the device
when you see the RED/GREEN/BLUE screen, plug in your USB cable to phone and computer
Run HSPL3 and update to HSPL 2.08
When done, the phone will Reboot, when screen turns off, press and hold the Volume Down button, if you don't, you will have to remove battery, put it back, hold the volume button, then turn on the device again.
when you see the RED/GREEN/BLUE screen again, make sure USB cable is connected to phone and computer install RADIO 2.15.50.14
Now MAGLDR will work.
If these instructions do not work,
MAIL IT TO ME, AND I WILL CLICK ON THANK YOU BUTTON
The phone is too complicated, I will find it a nice home.
Click to expand...
Click to collapse
Had similar problem with MAGLDR, had no idea what to do. Found this forum and these instructions. Took some fiddling but finally got it working. THANX SO MUCH!!!

same problem doesnt work

P3470 hardspl problem?????

I tried various times this method written below
but always got error while installing harspl after jumpspl
plz explain
JumpSPL & HardSPL Instructions:
1.Transfer the extracted files (JumpSPL.exe & Pharos_JumpSPL.nb) to your device and execute.
2.Use 0x10000000 as Jump Address.
3.After getting the Open File Dialog, press [Camera] & [Power] like you are going to enter Boot Loader, then tab on the Pharos_JumpSPL.nb file (Pharos_JumpSPL.nb).
You will get the grey background screen, you can flash any ROM to your device at this point.
In some case, you may need to unplug and then plug the USB cable again.
4.If you wanted to permanently unlock your device, why not, simply flash it with the HardSPL once and you are done.
After HardSPL, you will notice your SPL version change when boot;
From SPL 1.11.0001
To SPL 1.11Mobiz
Recommended:
•To make it easier, I recommend changing Button 3 (Camera) to <None> or the Camera may disturb you.