Related
Hi!
In the last some days i read a lot and found the following :
1. download the widcomm stack from axim site : LINK
2. install it + do a soft reset
3. get a registry edittor (Resco, CECMD etc.)
4. change these values :
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Device=COM
FlowControl=0
Parity=0
Port=1 (This is the most important thing!)
-soft reset
-at the today screen you will find a BT icon, click on it and have fun
TESTED FEATURES
-BT FTP, tested with : SE K750i, hx4700.
-ActiveSync : NOT WORKING
KNOWN ISSUES
-unable to control from comm manager
-blue led not flashing, easy to forget
-a2dp not tested
-tested on aku3.2 and aku2.3 roms, others maybe ok.
-other devices can't download bt services list, but the services works well.
-maybe unable to remove, not tested yet
-turns off, when you trun off your device, that maybe a problem with BT headset.
DO IT ON YOUR OWN RISK
Great news! Posted an announcement to the SP & Pocket PC Mag Expert Blog too!
Problems!!!
I've just installed the bluetoth stack in my phone. I've not yet tested it but i've found two showstop problems:
- activesync doesn't work anymore
- i cannot start the comm manager anymore (when i press the comm manager button in the upper left corner i can see only a small dialog with wifi and bluetooth power levels)
This is what i've done (maybe i did something wrong):
- copied the cab to storage and ran it (installed in device)
- soft-reset (required by the installer)
- edited the registry according to the first post
- soft-reset
I'm using an aku3.2 rom
-----EDIT--------------
Comm manager is working again. I had to reassociate it in Start-Settings-Buttons
Still no activesync (over USB at least)
bye
bye
Has anyone else tried this then? Has anyone tried the hermes cab install found in here...
http://forum.xda-developers.com/showthread.php?p=1072292#post1072292
There has been reports that it works on the trinity as well, so it may work on the Wizard.
Edit: No it doesn't. I have just ried it and it gives the memory error.
took the plunge and tried it
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...
new2city said:
Bluetooth works and I can connect my itech S35 to it. The A2DP profile is detected and can connect... problem is, the signal is too weak to maintain a connection, in other words, I just heard 2 seconds of music and that's it... Another problem is my speakers now don't work... must do more reading...
It's hopeful though...
I am using a Dopdo838...
Click to expand...
Click to collapse
Did you try tweaking the BT params (for example, lowering the bit speed) to see whether it would work at lower bit speeds? See my related articles.
got look out for the links to your tips and tricks again
Hi Menneisyys,
Surrendered on Widcomm stack almost 2 months ago, now have to look again for the links for your tips and tricks for the Widcomm stack again...
Any idea on how to restore audio to my speakers... still dead at the moment... sigh... don't want to restore my back up yet...
i found that you don't really need to remove the shift* keys. if you already removed it, download the BTSpeedSwitcher from the download link, and set the speed to 921600bps. that may help.
Got it working fine
Thanks, but now I am a bit unclear, but will clear things up later. I used the speedswitcher as you suggested and but I had to disable audiogateway before it could work... now I am stuck as I put my wizard into standby and now it won't come back.... on... doh!
Well, one thing I can confirm, you can put it into standby and the bluetooth is still on.......
will feed back more when I get a clearer picture of what happened.... The sound quality is great..... just skipped for a second but is not back to normal again...
My wizard has now a nice quality A2DP sound without the high pitch noise...
went to http://forum.xda-developers.com/showthread.php?p=1073003&posted=1#post1073003
and used the files from Superdave... all is well now... look at my reply at the hermes thread.. Now I will just back up this "working configuration" and retry these settings on the cab from Aximsite... All the same, thanks to the legendary Mikelspikel
Just wanted A2DP to work so bad.... and it does now. nicely..
new2city said:
Got it working
Click to expand...
Click to collapse
Okay, when you get time can you stick up how you got it all working? Many Thanks!
Ive installed the Superdave BBS_HERMES_03.CAB file and then modified the registry to use the above settings but every time i do the soft reset, the registry settings go back to the original values. Im stuck here.
Oh and i am using the last T-Mobile UK rom. (2.0 i think)
Edit 2: Now got it working. I had to kill voicecmd and cprog for it to load without giving the memory issue!
new2city said:
you can put it into standby and the bluetooth is still on.......
Click to expand...
Click to collapse
as it should - BT is on on PPC PE devices in standby mode, unlike on plain PPC's.
peetking said:
-unable to control from comm manager
Click to expand...
Click to collapse
It looks like comm manager is just an HTML document in the /windows directory. (Should be simple to redirect the button)
Leaskovski
sorry for the late reply but had a few setbacks during the night(I am in Malaysia)..
Got A2DP running all night and by mid morning... suddenly all went to hell..
1) No skipping with your suggestion of using MikelSpikel's speed switcher.
2) While trying to put it to standby to test if BT still works and it hung at first attempt. Something must have happened here as I recovered using the reset button and then suddenly I could get it to revert back to built in speakers and headset without issue. I thought, cool, it is like complete solution...
And then, I decided to backup this "complete solution" with SPB backup.. and after the softreset, I lost the ability to switch between headset and speakers. Then during the night while I sleep and use the headset, at around 3 am... the skipping came back...
and then... I restored the backup and now... got to tackle the skipping again.. never mind the muted speakers..
What linespeed(I use 320 dec), Blocks(16) and subband(8) do you use? I followed MikelSpikel's settings which work ok... last night...
back to the drawing board..
Right, i installed the superdave 03 version and then opened up the registry to make sure the settings matched the ones above. I had to kill cprog and voicecmd to start it without the memory error.
I have tested it now and although it is loading up ok, my headset connection is just not working properly. Its paired ok but nothing is getting routed through. However, my gps bluetooth device paired okay and is working fine with iGO 2006 after doing a detection. Damn shame about this headset! I am using a parrott ck3000.
redo..
Re-installed everything again and now I got a working version, some things to note though on my wizard..
1) I must overclock to 260mhz(battery status method) before I get skip free music.
2) Leaskovski, I had the same problem too in the beginning, where there is no audio getting through. Did you go to Bluetooth Manager and check the status of your headset? i went to mine(ItechS35) and I can see that the Wizard is sending data through successfully but there is no sound coming out of the headset. I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Now hoping to find a way to redirect audio back to speakers when bluetooth is not used..
not tonight though.. its 10.46 pm now where I am...
This doesn't look promising for how i though the BT audio might work with this stack. I was hoping for something like the following...
"A good example of this is MS Voise command running on the MS BT stack. The two devices are paired and connected, however there is currently no streaming. You then receive the text message and MS Voice command reads the message back to you. Just before the message is read, the connection between the devices is made live, and thus the message gets read over the BT headset."
I was hoping that this was going to work for all applications like media player and iGO. I can reproduce what it is doing at the moment using the BTAudio programme that is available on these boards. I just wanted to get around this 'constant' streaming of silent noise.
Damn shame.
Okay for anyone wanting to play with this, here is how i installed and got it running...
1) Download from this thread post http://forum.xda-developers.com/showpost.php?p=1072773&postcount=72 the file BBS_HERMES_03.zip.
2) Install onto your wizard and soft reset when asked. Upon the reset, the device will moan at you about not having enought memory to load the drivers. Click ok to close this.
3) Load up your registry editor (i use FDCSoft Task Manager) and make the following mods as stated in the first post...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\BtConfig\SerialTransport]
BaudRate=115200 (Won't start at higher rate.)
Port=1 (This is the most important thing!)
If you only want audio routed to headset when there is audio to route then make this reg edit...
[HKEY_LOCAL_MACHINE\Software\WIDCOMM\Plugins\handsfree]
Audiohandling=21
4) Do not do a soft reset yet.
5) Now fire up your Task Manager (i use FDCSoft Task Manager) and kill any memory hungry tasks. The ones i kill which then allow me to start the stack is voicecmd.exe and cprog.exe.
6) Now click on the BT icon in the system tray and turn BT on.
Obviously there must be some memory leaks some where in the wizard because a couple of people have said that later in the day, if you try to turn BT on again it wont start due to memory requirements. Anyway, the best thing i can think of is to leave BT on after you have turned it on.
Currently, the blue led will not flash when BT is one. Try not to use the Normal Comms Manager to turn BT one as well as i think this trys to turn the MS stack on which won't work (probably due to memory requirements! )
new2city said:
I solved this(that time, I don't know why it worked but it did) by going to Bluetooth services and removing the Check box for audio gateway enabled, and then music started coming through. I know, does not sound logical but it worked... that time..
Click to expand...
Click to collapse
I didnt get this to work in the end by the way.
I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?
new2city said:
I tried your idea to leave BT all the while but some problems pop up..
1) If turn off the headset without disconnecting it(BT still left on and the phone goes on standby, sometimes it won't come back.. a poke at the reset button is the only way..
2) I left BT on and disconnected the headset properly. Great BT is still on... BUT after a few hours, I can still connect the headset, but audio is not going there anymore... ??? but goes into internal speakers?
Click to expand...
Click to collapse
Hmm, i dont have those issues. I am using it with my carkit, so when i turn the engine off and remove the keys, the kit turns off. I haven't had to reset the device apart from when i have turned BT off and then tried to turn it back on again at a later stage (then giving me the memory issue).
Hi All,
I have been reading a lot of messages on both 8525 and 8125 trying to isolate the issue and there doesn't seem to be a straight asnwer anywhere and hence I am trying to get the attention of the users here...
I have a pioneer navigation system with a bluetooth built-in. My previous phone (blackberry) and my wife's treo650 both stay connected with car's bluetooth when on call (never a disconnect). But my new 8525 gets disconnected mid-call (usually after 2 to 5mins, but have also seen a disconnect within 1min). That is, it does pair with the car kit and when there is no call going on, the bluetooth connection never dies. This disconnect only happens mid-call, almost all the times.
I have the latest ROM (1,34.502...., radio: 1.16), got the phone about 2 weeks ago from Amazon.com. Called cingular and they say could be faulty phone and I have searched other forums like audi message board where their car kits are also having the same disconnect problem with 8525, so I doubt this is a single phone issue.
I have taken the 'band' hack and forced the phone to be in either GSM or WCDMA mode and in either modes, the phone still exhibits the same problem (there might not be any connection between the two at all, bluetooth with GSM/WCDMA, but thought there might be some weird connection...but not the case thankfully).
I read somewhere about some bluetooth tweaks on 8125, but never found what those were. I need some help here otherwise I am going to return the 8525 and stay away from it. I need the bluetooth to work efficiently.
thanks for all your help
Phal
San Jose, CA
please help
I really need some help, clue or direction on solving or at least isolating this bluetooth issue. I love the 8525 but if I cannot fix this bluetooth mid-call disconnect issue, I will unfortunately have to return, which I don't want.
What headsets the 8525 works fine with (no drops mid-call)? May be that is a starting point.
Please also give me some links to 8125 tweaks that some talked about? pof/other moderators/anyone?
thanks a lot in advance!!
Phal
I have an Motorola H700, and every once in a while it will disconnect, looking at the phone after that, BT is turned off, turn it back on and it works again...
There are problems with the hardware and the API used to access it, good phone, but I don't think it was ready for the market yet when they released it. It is likely to be corrected in the next ROM release, last I heard from Cingular is mid 2007, but by the way things go, prolly around late 07/early 08.
I'm having similar issues with the BT headset I use, which is a Samsung WEP150. It'll drop midcall to the handset. I'll look and BT is turned off.
The only remote correllation I've found is that it seems to occur when I've received a new email or something a la ActiveStink.. And I haven't really been able to confirm that... But I have definitely noticed it happening then though.
my 8525 does this as well with my factory BT in my 05 Acura TL. Kind of frustrating, have not been able to figure it out yet.
Problems w/ Audi BT as well
Same issues with my Audi Q7 BT. I have seen posts in this and other forums blaming the MS bluetooth stack.
My 8525 worked flawlessly with my Garmin NUVI 660, never disconnected or failed to connect automatically. This is frustrating.
8525 Fix
I had the same problem with the 8525 and my Pioneer Avic-Z1 bluetooth kit.
I hacked the registry to force the bluetooth radio to stay ON, rather than going into sleep mode. This seems to have fixed the problem (although with limited testing at this point).
My calls would consistently disconnect with 2-4 minutes. After the hack, I've had 2 45-minute+ conversations with no trouble.
Here's the fix... install a registry editor (like PHMedit), and add a DWORD here:
HKLM\System\CurrentControlSet\Control\Power\State\ Suspend
Add a DWORD called btl1: (note the colon, the colon must be there), with a DWORD value of 2.
Good luck!
My Q7 as well i took the advice of wolfgram and did this to my phone i will let you know how it works it would be a shame to give up this phone but it is really useless if this feature does not work right.
Well this is what i did i did what wolfgram said and it still cut out but not as much so i took the checks off in the advance power mode and never let the phone go to sleep and it works all the time. HTC needs to upgrade thier bluetooth setting not to go to sleep. It must stay active at all times MY phone book and all other info posted into my Q7 with no issues at all and it even sees the bluetooth b4 the MMI system in the car Boots up..
Lance
Resolution I think
I turned off 'Making device discoverable to other devices' and it seems to have solved this problem, I am using the phone with a parrot kit and it kept disconnecting now it works all the time.
Treo 750 doesn't have this problem
Well, hopefully you owners of Hermes have figured out the fix. I had to return it and now got the Treo 750 and can gladly say the problem is not there. The treo 750 has the v1.2, but I guess following the replies here, that possibly Palm fixed the problem by keeping the BT radio on at all times.
In any case, here is the post I wrote in avic411.com forum - if you want to see any follow up responses by other owners..
http://avic411.com/forum/viewtopic.php?p=24170
cheers
Phal
Bluetooth cut out
I am having the problem too with the garmin Nuvi and the Tytn - which is ineresting seeing as how one poster had no problem with the Garmin device. Here is something else that is interesting - I did not have the problem when I had the HTC 1.18 Rom installed. After I flashed the HTC 1.35 Rom, the problem began. I have already tried upgrading my firmware on the Nuvi - that did not help. I also use a Nokia 800 bluetooth headset - and that never cuts out with either ROM. I will try turning off the bluetooth discovery first. If that does not work, will try editing the registry. Keep you posted.
Turning off bluetooth discovery did not work.
Turning Off Bluetooth Did Not Work For Me Either
this worked for me.....
http://forum.xda-developers.com/showthread.php?t=247520&page=10
drains the battery quicker, but no more bluetooth problems.....
Hey guys, has anybody found a solution for the auto turning off of the BT in suspend mode? its gettin really annoying
Apologies if this is an FAQ, but I've had a quick look and drawn a blank.
I've just got my first Windows mobile phone (Vario II) and one of the things I really miss compared to my old Nokia, is that when I connect my bluetooth headset, I'd like the phone to switch to 'auto answer' and for the volume to be set to max. When I disconnect the headset, I'd like the phone to refert to a 'normal' or 'general' profile.
I require this because I use it on a motorcycle in conjunction with an intercom system, and I need the phone to auto answer after say 2 rings.
Is this possible on a smartphone?
Regards,
Glenn
Join the club mate......
I've been using the Vario2 in combination with a Nolan N-102 with the N-comm BT kit on it.....
I've been #$^&# with it for weeks now and I've made some progression...
First you need a program that allows you to select profiles like Nokia used to have...
I use PocketzenPhone but maybe there are some other(better) programs to do that.....
So then u can swith to a bike profile I've made and enable auto answer....
I've run the cab file to redirect BT sounds to my helmet in stereo (floats somewhere on this forum)
The only thing I can't do at the moment is enable Voicedial from the helmet...
If I press the button designed to start it ........f%ck all happens....
Still working on that but I'm running out of ideas....so any help would be appreciated...
Danny.
Pdanny said:
Join the club mate......
I've been using the Vario2 in combination with a Nolan N-102 with the N-comm BT kit on it.....
I've been #$^&# with it for weeks now and I've made some progression...
First you need a program that allows you to select profiles like Nokia used to have...
I use PocketzenPhone but maybe there are some other(better) programs to do that.....
So then u can swith to a bike profile I've made and enable auto answer....
I've run the cab file to redirect BT sounds to my helmet in stereo (floats somewhere on this forum)
The only thing I can't do at the moment is enable Voicedial from the helmet...
If I press the button designed to start it ........f%ck all happens....
Still working on that but I'm running out of ideas....so any help would be appreciated...
Danny.
Click to expand...
Click to collapse
Hi, the reason you can't activate voice dialing from your headset might be to do with the BT Audio cab you have installed to redirect sound through your headset. If the cab you have installed is the most common one floating around then this actually disables the launch of voice dialing in favour of being able to toggle between sound in the headset and sound on the phone (pressing and holding down the call button for a few seconds on your headset normally).
If you look in the registry HKLM>software>OEM>voicecommand, if launchapenable has a value of 0 then it is disabled. You can enable it again by changing the value to 1 but this will mean that your headset button will now not work as an audio toggle feature because it will launch the voicedial software every time.
Not sure if this is the answer to your problem but it sounds like it might be, hope this helps
Am trying as we speak....thanks for the reply....see wat happens...
D.
Well.....Ive got good news and bad news....
The good news is that I can trigger voicecommand now......
The bad news is that MS voice command 1.6 is not reconizing my accent...(dutch)...
So out of 10 tries it never called the number i wanted.....
So I tried the build in SDdialer.....and that one is doing a better job....
However I can't make the sounds to stick in my helmet........
I mean...
With MSVC by pressing the button on the helmet I could redirect the sound to the helmet and get a voicecommand tone at the same time....
By symply not speaking or saying '"cancel" it would cancel the voicecommand but the sound stayed in the helmet.....
With SDdialer following the same steps as above the sounds does not stay in the helmet but goes back to the speaker......
Any ideas????
BTW is there a dutch version of MS voice command?
If you go back into the registry, in the same location as before, check the value that is in VoiceCmdDuration (This is the amount of time the voice prompt stays active for in seconds) .. the audio cab file usually sets this to 86400 (24 hrs in seconds), if yours is low eg. 10, 20, 30 etc.., set it to 86400 and that may sort out the problem.
Duration is set fort 24 hrs....already..
Funny thing is that MSVC is not cutting out and the sddialer is...
Regsetting stay the same.....
By pressing the button on helmet I just change the exe file.....
Only option is to try and get MsVC to work and get use to my voice....
D.
Hmmm booking slow process.....tryed to call with MsVC and now 2 out 2....
Ordered to play media from helmet......worked..
This is only sitting in the livingroom with helmet on.....looks absolutely silly but thats besides the point
P$ssing with rain here so hoping for better weather to go for a roadtest...
So thing needed for me to get it to work...
-MsVC 1.6
-Bluetooth stereo cab
-Regedit from the MsVC topic..
-PocketzenPhone for designing profiles.....however thinking on removing that...and see how that works.....
D.
I am glad that you are at least part way there to solving the problem
I don't have Voice Command on my phone. On the rare occasion I use voice dialling I use the standard SDdialer program but my sound diversion does not revert back to the handset like yours.
I must have changed something on it to get it working but I am afraid I don't know what because, when I was trying to get it working, I tried absolutely everything and it was quite a while ago now so I have forgotten what I did
It sounds like Voice Command is going to be okay for you though so that is good.
By the way, Phonealarm is also another good profile switching program.
Thanks for the replies guys, but I think I may have accidentally discovered my own solution.
On my T-mobile vario II, if I go to the Phone->Settings and select the 'more' tab (need to scroll along the last tab at the bottom of the screen) there is an option to 'Automatic pickup' which will auto answer a call after x number of rings.
I had always assumed this would kick-in even if no headset was present. However, I've just done some simple testing, and it looks like the auto answer only kicks-in if the phone is currently in comms with a headset (I used a bluetooth one but probably the same for the supplied 'hands free' kit).
So this functions exactly as I want it to.
Oh, and Pdanny, for background info I'm using a Nolan 101 (no bluetooth) with speakers and mic installed. These connect to my 'Starcom' intercom (via an old fasioned curly lead) which allows me to hear directions from my 'TomTom' and also take phone calls via the starcom/phone bluetooth partnership. Down side is that the wife can also talk at me .
As I never want to initiate a call while riding, this setup works just perfect for me. I don't need to remember to change the phone setup either before or after mounting the bike. As soon as the bike ignition is turned on, the intercom partners with the phone. Then if I receive a call, it auto answers and I can take the call. Once the ignition is switched off, the phone reverts to normal non-auto answer.
In my research for this issue I came across an app called 'phonealarm' (from pocketmax.net), it was the manual for this that made me try the above experiment. This looks like a neat app and I may still end up installing it as long as it does not hog the processor.
[edit]OOps sorry Nicky, just noticed you already mentioned phonealarm. I'd be interested in any comments you have about this app, good ot bad [/edit]
Once again, thanks for the replies, and I hope this thread helps someone in the future.
Regards,
Glenn
Phonealarm......give that a try thanks.....
Im also going to test with the buils in auto pick up.....
I knew it was there but i assumed that it would ALWAYS auto pick up...
It seems that that is not the case therefore making the Pocketzenphone and possibly phonealarm obsolete.....
I also get all the sounds over BT in my helmet....incl TT
Also... I don't have a wife .......sounds like a perfect world hey???
Keep you posted on the outcome of the xperiment....
Grtz
Danny
Hi knnelg, glad you managed to sort your problem. I always knew the option for autoanswer was in the settings but like you, I had assumed that it would autoanswer all calls regardless of whether a headset was connected so it is handy to know that it only applies when in headset mode.
You asked about opinions on Phonealarm, I think it is a great program. I have used it on my Vario II and my last phone, an XDA Mini S, and it is has always worked fine, no problems at all.
I really missed having phone profiles when I switched to PDA style phones so Phonealarm was one of the first 3rd party apps I ever bought and I wouldn't be without it now Also, Bruce, the developer of phonealarm, is very good at listening to users input and if enough people make a suggestion about an improvement or tweak to the program, he will implement it in future versions which is really nice.
One of the other programs Pocketmax does, Alarmtoday, is useful too.
Hi,
Can't find anything in any other threads so here goes..
My M3100 (TYTN) turns bluetooth off when I turn off my Sony HBH 300 BT earpiece.
It doesn't happen everytime, maybe 50% of the time. It wouldn't be a problem but during the working day I connect and disconnect maybe 10 to 20 times and when I get back on the road and fire up the earpiece I suddenly find no BT.
I'm normally not in a place where I can safely stop to go through the connections screen to re activate it....
Not had this problem with any other phone, Nokia, SE etc...
I think it also happend once or twice after turning off my TomTom One whilst running the traffic BT connection to my phone...
It is getting to be a pain, so much so I'm considering using a OLD Nokia instead of the M3100. Only advantage is the M3100 allows more than one BT connection at the same time although you do have to connect the BT earpiece before connecting to the TT One unit...
Any ideas how I can stop it turning off without ME actually turning it off, never happens anyway, I just leave it on...
HELP !!
Phil-w
I have a similar problem and would love to find an answer before my 30 day return period is up! I haven't been able to find out WHY my BT radio always shuts off, but about half of the time I get in my car the BT is off. This - and the MS Voice Command hack not working with my particular HF - is going to make me return this thing.
BTW, I have Cingular 8500 with stock WM5.
Worked for me
Hey guys. I had a similar problem a while back.
I had installed a comm manager, and my BT was randomly shutting off. After getting some responses, I uninstalled the updated comm manager, everything has been working fine ever since.
I would recommend following the same course of action. If you don't have the original installed, maybe try installing a new one.
I recommend keeping the phone. It's great. There is SOOOO much you can do with it. If you are unlucky and got a lemon, that's a different story.
But I do not think this problem is common... good luck.
Last week I updated my ROM to the latest official AT&T release, and my BT problems *appear* to be solved.
Any of you have a problem with Bluetooth failing? I've noticed that while tethering, if I'm doing anything particularly high-bandwidth, Bluetooth utterly fails. For example, while downloading torrents, watching youtube videos, or video calling, my connection fails and I need to soft reset my phone before it'll work again.
If I try turning Bluetooth off, then on again before a soft reset, the phone hangs at the "turn Bluetooth on?" query screen and doesn't turn it back on. After a reboot, everything's fine till it fails again. It's not my data connection, because I can still browse the web from my phone.
dartinbout in the eXpo users' group seems to have been having similar problems with his stereo Bluetooth headset.
I also seem to recall having similar problems with WMWifiRouter as well, but I can't test it anymore as my trial period has run out.
my bluetooth fails when listening to music on a stereo headset. i have to reset and reconnect after it stops playing and freezes.
when i try to use wmwifirouter it does not show a 3g to bluetooth option and internet sharing bluetooth pan will not work.
a few times i have turned on my phone and it said failed to load bluetooth stack. it also has given a similar error when bluetooth was on but not in use.
i hope the custom roms can have different bluetooth stacks more like the htc bluetooth stacks
You know what, after dealing with this problem for a while, that sounds exactly like the problem I'm having. WMWifiRouter will stop working after a while, and when I restart the phone I get the same errors. Internet Connection Sharing fails when I watch videos, very, very often while I'm watching YouTube or trying to video chat with someone. I actually watch my data transfer go from downloading and uploading to absolute 0.
I haven't contacted LG about it yet, but it's driving me nuts... >_<
EDIT: Just to double check, nev310, when your bluetooth fails, are you also using it to tether, either through WMWifiRouter, or through ICS? I ask because I use bluetooth for music at work all day and it never fails, but when I come home and use either ICS or WMWR it fails between 1 to 10 (at last count) times, without using a bluetooth headset.
-Tj- said:
You know what, after dealing with this problem for a while, that sounds exactly like the problem I'm having. WMWifiRouter will stop working after a while, and when I restart the phone I get the same errors. Internet Connection Sharing fails when I watch videos, very, very often while I'm watching YouTube or trying to video chat with someone. I actually watch my data transfer go from downloading and uploading to absolute 0.
I haven't contacted LG about it yet, but it's driving me nuts... >_<
EDIT: Just to double check, nev310, when your bluetooth fails, are you also using it to tether, either through WMWifiRouter, or through ICS? I ask because I use bluetooth for music at work all day and it never fails, but when I come home and use either ICS or WMWR it fails between 1 to 10 (at last count) times, without using a bluetooth headset.
Click to expand...
Click to collapse
when it fails i am listening to music through a lg hsb-250 bluetooth headset at work with screen off using wmp. when i load wmwifirouter the 3g to bluetooth button is grayed out and i cannot use it. i have used 3g to wifi and when i close the connection and close wmwifirouter my phone acts like it doesnt even have wifi. doesnt show it in wireless manager at all i have to do a soft reset.
since i did a hard reset i have not had a bluetooth crash but it use to crash everyday sometimes only after a few minutes of listening to music.
the only way i can use bluetooth tethering is through the intenet sharing app after changing the registry to use media net but my car pc will say i have no internet access when connected, my laptop works fine..if this phone wasnt so fast all this would be a huge problem but i just deal with it. i hope it can be fixed in a rom update or cooked rom.
also.... (unrelated) the other day i turned on my htc fuze and waited for it to boot up tried to connect to wifi and load opera...took over a few minutes and the screen just feels weird and i have to hold it was up to my face i used it for over a year and now im like how did i use this phone lol. but what i did notice is i have a 6.1 rom on it and have more free ram than used ram(i think about 50mb used out of 203mb) so i started to see how many apps i could run with out them closing and running out of ram lol. all that free ram made me kinda want a 6.1 rom for the expo .i also wanted to make a thread to see what phones people had before their expo/iq
-Tj- said:
Any of you have a problem with Bluetooth failing? I've noticed that while tethering, if I'm doing anything particularly high-bandwidth, Bluetooth utterly fails. For example, while downloading torrents, watching youtube videos, or video calling, my connection fails and I need to soft reset my phone before it'll work again.
If I try turning Bluetooth off, then on again before a soft reset, the phone hangs at the "turn Bluetooth on?" query screen and doesn't turn it back on. After a reboot, everything's fine till it fails again. It's not my data connection, because I can still browse the web from my phone.
dartinbout in the eXpo users' group seems to have been having similar problems with his stereo Bluetooth headset.
I also seem to recall having similar problems with WMWifiRouter as well, but I can't test it anymore as my trial period has run out.
Click to expand...
Click to collapse
The bluetooth issue is one that I've had with my handset since I got the phone back in December. First when I would have my bt headset paired and I'd answer a phone or stream audio it would work fine. Then out of nowhere someone would call or I would make a call, and I couldn't hear anything through the headset. I would have to reset the bluetooth or reset the device. My phone would get hung on the "Turn Bluetooth on" screen just like yours does and I'd have to reset the phone. I have repeatedly talked to LG about this and they said I would have to send in the phone.
This also happens when I tether over bluetooth. It will work for a bit, but after a while even with no traffic the connection fails. The phone still says its connected though.
I bought a Tilt 2 from a user on ebay so I'm going to use that phone while my eXpo is away at LG. It appears to be hardware related though.
SPIDER, you better not leave eXpo forums. Hope it gets fixed!
phatride4ever said:
SPIDER, you better not leave eXpo forums. Hope it gets fixed!
Click to expand...
Click to collapse
lol. Nah, My wife has my Tilt that I upgraded from to the eXpo, and I'll give her my tilt 2 when I get the eXpo back. I will say though, LG could definitely learn a thing or two from HTC when it comes to smartphones. My expo so far has made me doubt my choice of it over the tilt 2 and my experience in the DAY that I've had the tilt2 has made me doubt my original choice even more. I'm hoping that once they fix it and I get back a fully functional phone I'll put those doubts to rest. I love the snapdragon and the possibilities that come with it, but I'd take the slower processor of the tilt2 over a snapdragon phone that doesn't work worth a damn most of the time.
(crosses fingers)