So I would like to have the ALS enabled on my TyTN...1 work number and 1 home number. Once at home I change to the home number but make a fw from the work number...is there any chance to see that a person is calling me on the work number?...in short I want to know which calls are re-directed from the work number? Any idas?
Regards,
Primoz
Related
I have no idea if this is possible, or if there is a utility out there for this but i am looking for a way to only allow calls to numbers in the telephone address book.
Does anybody know of a utility?
This will give me central control of who users can/cant call using the management software that i have.
Thanks in advance,
Noodle.
I myself wonder how I can restrict calls from one caller only; like to divert a given number directly to my voicemail..?
I never did find the software i was looking for.
The problem i have is fixed dial sim's dont work correctly on XDA's. Aparently its a problem with the sim card voltages or something.
Ive given up on it
Give Novosec SmartFilter a try, very cool proggy but it will not divert to another number but will give you full control of who can call and when.
Sounds good. I'll give it a try.
(I'm really bothered by a client who calls essentially on Monday morning and Friday afternoon
hi prerna
novosec smartfilter works fine with me
if interested gimme ur email id i shall send it to u
ankesh
pune
Just got my new Orange M3100 (Tytn) and I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Also trying to do similar with Bluetooth settings as I swap my BTheadset between phones just as frequently. I have found a link on this site to a utility to do that but not had chance to try it yet...
Can I just make a shortcut to that as well ??
Apart from that it appears a excellent device, running Tomtom etc without any problems....
Thanks in advance Phil
All the ways I tried to create such a shortcut do not work, because it requires an USSD "call". I asked WM5NewMenu author to implement USSD handling, will see...
For now the best solution I've found is to assigh speed dial keys in the dialer to USSD sequencies to divert and cancel diverts. It's OK for a while because speed dial keys can be easily accessed with one hand only (green phone button, then arrow left or down).
EDIT: In case you don't know USSD sequences... You'd better consult your operator to be sure. For me:
Divert all calls: **21*number_to_divert_to#
Cancel divert of all calls: ##21#
There are also codes for conditional diverting, of course.
Hi Phil,
What Lurker0 has mentioned is a good idea. You can save those strings as a number in a contact and maybe assign a speed dial or voice tag to that contact for speed? I guess one contact to enable and another to disable. The commands Lurker0 mentions are standard over all networks.
I'm not sure if there are ways to send AT commands to the modem in the TyTN (M3100) but it is another possible way to do it if someone knows how, if not then it might be useful info to someone else.
The AT command you need to send is AT+CCFC=1,1,<number>,128,1,,, this is the number in local format (no +44) like 07968xxxxxx to enable and AT+CCFC=1,0 to disable.
Gavin.
Phonealarm may be a simpler solution as I think u can add a forward number within a profile so just switching profile from the Today screen (phonealarm skin) would do the trick...
www.pocketmax.net
I've not had any dealing with the ATM commands so to be honest I wouldn't know were to start. I've just tried to install Phone alarm in my Orange SVP
M3100 but after asking me if I need and extra language the software just locks up.. Soft restart then required....
I managed to find the directory that it was installed in, the setup prog is there but I can't find the executable file, I guess that it has not got that far !!!!
Any help please...Phil
I'd suggest to try USSD codes as the easiest and 100% working solution.
Tried the ussd numbers in the contacts list.... works very well both divert and cancel divert... Just need to setup the speed dial now, were is that manual !!
Thanks again.
Phil-w
Hi Phil,
Go into the phone skin (green button) > Menu > Speed Dial...
That's you...
Gav.
Speed Dial is also at "green phone button" then arrow left, or arrow down, or wheel down. So one hand operation is possible.
Many thanks to you both... Nice to find helpfull people on here... Phil
phil-w said:
I'm having problems with trying to forward incoming calls to another number. I have to divert and cancel divert often during the the working day and could do with a short cut to the settings call forwarding page. I don't seem to be able to make one... Could anyone advise...
Thanks in advance Phil
Click to expand...
Click to collapse
Phil,
I do the same and installed the O2Plus (and patch) software which tweaks the today screen and gives direct access to mutiple profiles for different forwarding options - works really slickly.
Check this forum for the .cab files
Hope that helps.
Rgds
Lifechanger
i tried putting the codes in a speed dial but Tytn unhelpfully said i had to enter the sequences in from the phone pad directly. all i did was put the **21*<no># in as a speed dial. did i miss something somewhere?
If you are rooted, start a shortcut to "Activities". Scroll down to "Phone", expand that, then scroll down to "Call forwarding". Select! Easy peasy.
Hi @ all,
I have a question or request. First let me explaine the situation.
I use justVoip.com for calling German Cells cheaper and the USA for free. I call justVoips Landline for free (because I have a landline-flat) and they forward the call to the desired number. I used to just save their number before the contacts number seperatet by a "P" (pause): 08912345P0172123456
When receiving calls my Motorola would still recognize the Call-id, also with the voip number in front of it. But my X1 now doesnt recognize calls with their number inserted...
So my question is... either is there a way to have two seperate phone books running parallel or is there maybe a software that always asks if the preselection should be added when making a call??
Or a nother solution I didnt think of yet..
Hope this wasn't to complicated and you kinda now what i mean...
thanks..
Danny
Hello,
I often use an access code to dial internationally, and once I am connected to that access number, I have to enter the number of the person I am calling.
I have an HTC Touch HD with WM6.1pro and cannot find a way to do it. If I connect to the access number, then at the prompt go to my address book and dial a second number, it assumes I want to have two separate calls and puts the access code on Hold... which is not what I want! I do not remember all my friend's numbers, so I do have to use the address book.
With my old nokia n95, once connected I could go to the menu and say I want to dial a DTMF which is the tone you hear when dialing a normal phone. This allows me to follow on with calling the number I need while connected to the call.
Is there a way of doing this on WM6?
I have a kind of work around. I edit my international friends phone numbers as a "car phone" and the numbers look like this
02081802828 p 0027115555555
the access code, then I add p to pause then their number.
The HUGE problem is that when I dial any of my international contacts, the phone displays the same person... so no matter who I call internationally, it always shows a photo of my friend Ian, and displays his name instead of the person I am actually speaking to. I think this is a bug where WM6.1 only looks at the first 11 characters of a number, but the problem is, all my intl numbers have the same first 11 numbers.
Help MUCH appreciated, thanks,
Mark.
livegod said:
Hello,
I often use an access code to dial internationally, and once I am connected to that access number, I have to enter the number of the person I am calling.
I have an HTC Touch HD with WM6.1pro and cannot find a way to do it. If I connect to the access number, then at the prompt go to my address book and dial a second number, it assumes I want to have two separate calls and puts the access code on Hold... which is not what I want! I do not remember all my friend's numbers, so I do have to use the address book.
With my old nokia n95, once connected I could go to the menu and say I want to dial a DTMF which is the tone you hear when dialing a normal phone. This allows me to follow on with calling the number I need while connected to the call.
Is there a way of doing this on WM6?
I have a kind of work around. I edit my international friends phone numbers as a "car phone" and the numbers look like this
02081802828 p 0027115555555
the access code, then I add p to pause then their number.
The HUGE problem is that when I dial any of my international contacts, the phone displays the same person... so no matter who I call internationally, it always shows a photo of my friend Ian, and displays his name instead of the person I am actually speaking to. I think this is a bug where WM6.1 only looks at the first 11 characters of a number, but the problem is, all my intl numbers have the same first 11 numbers.
Help MUCH appreciated, thanks,
Mark.
Click to expand...
Click to collapse
Don't know if it will work... but you coud try (using Advanced Config) to increase the number of digits used to "match" the numbers in the contacts... for example to 18 or 19 numbers... but I cannot immagine what other "consequencies"could happen...
Let us know !
Regards,
K
Hi Kostas
It seems that the problem is actually with spb Mobile Shell and not windows mobile.
When I dial using the windows mobile dialler, it gets the name and picture right, but when I use spb's dialler it shows the wrong person and name...
I will chase it up with them... and thanks for the good idea, unfortunately the Call ID Match does not help the problem.
Efgaristo!
Mark.
i have started using my S4 at work
im a cable technician, when i call customers im blocking my number using #31# before the actual number of the client for obvious reasons- its a big company, anything has to go through their customer service center
the thing is, when i call a client using that prefix, its gone in the call log, so when i need to call him again( which often happen) i need to dial the number again which is very uncomfortable as im calling dozens of customers everyday, my older work phone was a simple J105 sony ericsson , which used to saved the number in the call log just as it was, smartphones for some reason, dont...
is this a setting i can change or some other dialer i should use ?
please? anyone?
Maybe try other dialer and contact apps...