Bluetooth Hands Free Voice Dialing - P3600 General

I've just bought a Jabra BT250v headset and wanted to be able to use the voice dialing commands to dial from my Trinity rather than use the buttons and the phone pad. It doesn't seem to work! Has anyone doe this? Is it possible to use the Trinity to voice dial over Bluetooth? Am I doing something wrong?
Thanks in advance for you help?

I am using a Samsung BT-headset, and also using VC over BT, no problems...
You do know that you'd have to pair the two first, not ?

Yes of course! I've even made the regidtry change but I wasn't able to find VoiceCMD.exe. SDDialer.exe is what launces my voice commander but for some reason when I press the button the the BT headset only the dialup keypad launches. I can't get it to launch the Voice dialer. HELP!!

Sorry if this is the regedit you've already tried but definitely works for me on prophet.
* Install Voice Command to the default location.
* Start registry editor
* Go to: HKEY_LOCAL_MACHINE\SOFTWARE\OEM\VoiceCommand
* Modify the string marked "path" from the default \Windows\SDDialer.exe to \Program Files\Voice Command\VoiceCMD.exe
* Now, when you press your BT headset connect button, MS Voice command should start and take commands through the headset.

I have but SDDIALER.EXE is the prog that fires up the Voice dialer CYBERON Voice Speed Daler it came with the phone. Still doesn't work! ANyone HELP!!!

I use it with no problem and my jabra. Just push the button on headphone. wait for the sound, and say the name.... that's it!

HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway:
Change the string value called "BTAGExtModule" from "OEMAGW.dll" to "BTAGExt.dll". soft reset.

I have the BT250v too and it works okay with voice dail.

i m using this Jabra too and was able to use the Cyberon program, however sometimes the voice dial recognition seems bad..example if i mention 1, the dialing on the phone becomes 1 , 0 , 0.

shayd said:
HKLM\SOFTWARE\Microsoft\Bluetooth\AudioGateway:
Change the string value called "BTAGExtModule" from "OEMAGW.dll" to "BTAGExt.dll". soft reset.
Click to expand...
Click to collapse
This hack kind of solved the thing, but I had to rename "BTAGExtModule.dll" to "BTAGExt.dll"
I use:
Trinity P3600 with Jabra BT500v
mUn 1.25TE
Cyberon Voice Dailer
ncruz BA WM5 Voice Dailer 2
Sleuth255's A2DPFix

voice dialing with jabra
the best way is to upgrade to dopd d810 rom and in there there are plenty of voice commands including asking your pda what time is it and it would tell you
this the rom you want
RUU_Trinity_DOPODASIA_WWE_1[1].23.707.6_6275_1.35.00.11_108_Ship

I use the BT150 with no problems!

Related

Program to change button assignment?

Hi Guys, would like to know if there is a proggie for the Atom to change button assignment. What I want to do is to assign Microsoft's Voice Command in lieu of Media skin or Voice Speed Dial.
Cheers,
use AE Button Plus
Thanks. Will try it out
Cheers
It Worked!!! Big thanks.
cheers

TyTn Microsoft Voice Command

Hi all! What a great forum.
I am using Microsoft Voice command and when I push the little button on the original headphones it only activates Voice Speed Dial. How can I change this so it uses Microsoft Voice Command instead? I have not seen any options to change this?
Go to settings, buttons. It is set to Voice Dialer, and your voice command button has been assigned to a different button.
Going into buttons you should be able to assign your 5 configurable buttons how you want, including voice dialer and voice command as you want.
If you want to use voice command on a bluetooth headset, you need to go to WIKI and view the registry edits. Universal, Hermes and the General WM5 hacks will all give you guidance.
Start here, but look around all of WIKI and it will help you.
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
simon_darley said:
Go to settings, buttons. It is set to Voice Dialer, and your voice command button has been assigned to a different button.
Going into buttons you should be able to assign your 5 configurable buttons how you want, including voice dialer and voice command as you want.
If you want to use voice command on a bluetooth headset, you need to go to WIKI and view the registry edits. Universal, Hermes and the General WM5 hacks will all give you guidance.
Start here, but look around all of WIKI and it will help you.
http://wiki.xda-developers.com/index.php?pagename=Universal_Registry
Click to expand...
Click to collapse
Thanks for the reply Simon. I did a lot of searching before posting about this and done the registry hacks that I found. I also assigned the Voice Speed Dial button to MS Voice Command and deleted the shortcut files assigned to Voice Speed Dial.
Maybe this is a hardware limitation of the ORIGINAL headphones? I know that with the hacks that I did that bluetooth headsets will work, but the original wired headphones are a being a challenge!
sorry halldor
didnt read your original post correctly and have replied incorrectly.
i am unable to help cause i refuse to use wired headsets. i am totally unco with long arms and cannot handle having wires around my head across my body into my pockets to my phone where i can twist turn pull and push them they just infuriate me. not since i opened the box on any of my pda's have i touched the wired headsets
just dont work for me full stop.
at least now, its bumped to the top again where somebody else can help.
Halldor said:
Hi all! What a great forum.
I am using Microsoft Voice command and when I push the little button on the original headphones it only activates Voice Speed Dial. How can I change this so it uses Microsoft Voice Command instead? I have not seen any options to change this?
Click to expand...
Click to collapse
AinĀ“t there no solution for this issue (re-assignment of the wired headset button) yet?
Lumi74
I'm also looking for a solution for mapping the button on wired headset on a Tilt...anybody figure this out yet?
I stopped using MS Voice Command and use Cyberon Voice Commander instead. Cyberon works with the wired headset and is more accurate for me then MSVC when dialing.
Cheers,
Halldor

remap wired handset button ?

hi,
i want to remap the function of the handfree kit, is taht possible ?
i want another function than the voice num on this button.
how to do ?
no, that's not possible, since the button is hardcoded in the handsfree rom. it's not even managed by your phone, in fact.
sorry for my english: i was talking about the "Wired Stereo Headset" that is included in the package.
i dont think there is any hardcoded things in this wired handset.
Play with this...
HKEY_LOCAL_MACHINE\Software\OEM\VoiceCommand Path = "\Program Files\Voice Command\VoiceCmd.exe

can some one help to customise my handfree button

Hi
we all know htc's devices are using voicecommander app for adding voice dial tag and use it for voice dialing , htc's touch headphones ( or earphones ) buttons are costumised that if you hold press it ( 3 - 5 secconds ) will run voice dial detectore , but dont like that program is there a way to change from voicecommander to another programs , i would like MS voice command , so i want to customise my headphone button to run MS voice command , please any one can help and tell steps ?
thanks
hi
tap start, settings, buttons, 1. select button you require to change 2. assign a program to that button
tried that before ,it dosent change headphone button , only phone button
thanks for reply

Voice Dialing on Diamond2?

Hello all, I am looking at picking up a Diamond 2 variant (Probably the NextG one so I can get 850 3G), but wondered if Voice Dialing is support or included with the Diamond2 anywhere?
Also how easy is it to get to and actually do a voice dial of a contact? My Touch Cruise had voice tags assigned to whatever function or contact and that was easy enough, but it also has a hardware key for voice dialing only...The Diamond2 does not have that hardware key and so I wonder how easy it is to actually access the command and utilize it without going in several menus, etc.
voice command
Hi,
I used MSVC on 6.1 , installed it on 6.5 , working well no probs.
Did it come with VC then? Or did you have to use a cooked ROM to get it, or did you buy it?
How easy is it to us VC once installed...can you assign a button to voice dialing, or is it an icon you can have on your Home screen readily accessible?
I am using only cooked ROMs and can confirm that on most of them (WM6.1 or WM6.5) Cyberon VSD is working perfect. You can either run Cyberon VSD from the left hard key or from the BT headset's button.
What is the "left hard key" exactly?
Free Man said:
What is the "left hard key" exactly?
Click to expand...
Click to collapse
The send button which you use to answer a phone.
The retail version of Cyberon Voice Commander (not VSD, MSVC-like ) works great on Diamond 2. It supports BT button, and you can set dialing key or volume-up/volume-down keys as hardkey from its Settings.
You can download this version from Cyberon's website.
If you search this forum for "cyberon voice dialer" you'll find a cab that fits for you.

Categories

Resources