Hey I have innstalled a ROM but when at the startup Qtek screen my wizard turned off and did not turn on or get into bootloader mode.
I have a serious problem Please Please help me!
Need more info.
Raptus said:
Hey I have innstalled a ROM but when at the startup Qtek screen my wizard turned off and did not turn on or get into bootloader mode.
I have a serious problem Please Please help me!
Click to expand...
Click to collapse
hmm, can it be used in this case?
--M
Related
Urgent Help needed
My dear forum colleagues,
I have attempted to upgrade my QTEK 1010 using the ali-win2k3 file that contained the Radio stack 4.00.01
Previous stack was 3.16
Unfortunately after upgrade the image stays 'Test only Not for Sale' I have another Radio version on my SD Card but I don't know how to unload it.
As now my brain halted due to panic, Please give me instructions as it was for dummies to get out of this mess!
PLEASE HELP.
Also note that the WALLBY Bootloader is V5.15 and goes to GSM OK and stays there without providing any action buttons or so...
Please advice urgently.
you urgent help will be much appreciated!
http://xda-developers.com/forum/viewtopic.php?t=2189
THANK YOU ALL!
THANKS ! I resolved. The card reader does magic
Re: THANK YOU ALL!
finikas said:
THANKS ! I resolved. The card reader does magic
Click to expand...
Click to collapse
Glad to here you resolved it, sorry about the late reply.
Re: THANK YOU ALL!
finikas said:
THANKS ! I resolved. The card reader does magic
Click to expand...
Click to collapse
Did you try to install another ROM and got stuck? You pm'd me after this post. Please advise.
all 4.xx.xx ROMS that I try fail. They freeze in image.
all 3.xx.xx are ok.
hi guys,
tried to upgrade my alpine,but know it will not get out of the serial v1.01 screen.any and all help is needed thank you
The answer should be here in the forum. Try reading....
Anyway, moved your thread in the alpine forum, because it´s not a general issue....
Stefan
use the earlier version of activesync.(3.8)
activesync v4.xx doesnt work
tcr said:
hi guys,
tried to upgrade my alpine,but know it will not get out of the serial v1.01 screen.any and all help is needed thank you
Click to expand...
Click to collapse
Solution for getting Alpines out of the Bootloader screen:
http://forum.xda-developers.com/showthread.php?p=1739989
please help me, i need everytime i use my 2020i to allign my screen.
what to do? im going crazy...
help me please
gus8511q said:
please help me, i need everytime i use my 2020i to allign my screen.
what to do? im going crazy...
help me please
Click to expand...
Click to collapse
Yesterday.
I'm try to up new rom.But my xdaIIi still by this.
I'm solved my problem[like you]with new parts of LCD.It's worked.
can you tell me what parts of yours 2020i lcd you change?
also tell me any webshop
thnks
Hi Can anyone please help me how to overcome my problem? My device is stuck in the boot screen . Things don't change even after hard reset...Can anyone upload the original shipped rom for Dopod C800 1.09 rom?
hey my friend the same just happend to meee ;(
Do you found a solution ?
murali509 said:
Hi Can anyone please help me how to overcome my problem? My device is stuck in the boot screen . Things don't change even after hard reset...
Click to expand...
Click to collapse
put the phone in bootloader and flash the original rom
I have the same problem. No matter what rom code I flashed, always update error 300. Is there any idea to get rid of this problem? Thanks!
Strange... Isn't error 300 about using a RUU flasher on the wrong device?
Got my device to life after going to the service centre.... Successfully changed my Rom this time after using Hard spl by Canonyang and now I had flashed Touch IT V4.40....
My sincere advice from my experience...
Please read the instructions thoroghly before you attempt anything..
Happy flashing
murali509 said:
Got my device to life after going to the service centre.... Successfully changed my Rom this time after using Hard spl by Canonyang and now I had flashed Touch IT V4.40....
My sincere advice from my experience...
Please read the instructions thoroghly before you attempt anything..
Happy flashing
Click to expand...
Click to collapse
THANKS!!!
We tell it soooooo often. But it is good to hear that your device is back to life.
And it is GOOD to hear that the instructions we are giving - are helpful...
FOR EVERYone...
Hey dude, thanks a lot for your new rom... I'm a novice in this field and dont know anything..Does ur rom touchit4.4 have keyboard issues on Dopod C800?
murali509 said:
Hey dude, thanks a lot for your new rom... I'm a novice in this field and dont know anything..Does ur rom touchit4.4 have keyboard issues on Dopod C800?
Click to expand...
Click to collapse
it´s NOT mine. it is ITJE!!!
please ask in this thread. and please find out keyboardissues by flashing. i guess there is noone else with dopod running it...
Thank u for the quick reply....
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Ok first download a proper ROM for your SP3.
I think you can use the procedure as when you want to revert to wm2003 on this tread:
http://forum.xda-developers.com/showthread.php?t=279464
Thanks !
Hi,
Thanks a lot buddy ! but the said procedure only works if the phone is atleast in the bootlaoder mode (i,e the tricolour mode) but as I said mine is almost completely dead (no lights when charger or the usb is connected and not powering on,I mean not even the LED glows) !!!!
So Am kinda stuck in this stage ! so I need a real trick to some how gain access to the ROM and flash it completely and install the proper one ( I mean I have to erase the EEPROM completely !)
Its similar to the one in the post #8 in the link you've sent !! and the answer to it in post is what I don't want to hear !!
Anyways thanks for quick reply man ! really appreciate it !
Regards.
Hi, are you solved your problem with your phone, if not i can help you, Wright me to PM...
P.S. For all Who unlock his phone via Imei-check, please send me your used "Key file"...
charge ur batire an tray agin baby
and tel me morrrr
handsome1_blr said:
Hi All,
Am new to this forum ! but have been a passive member since very long time !
Now I have major issue and need help from the fellow members !
I have a Imate SP3 and was trying to update the rom ! My stupidity !! I tried to flash SP5 ROM to this and at 68% the desktop application threw and error and disappeared ! the phone was stuck at 68%,so I took the battery out and from then on the phone doesn't switch on !!
So desperately need help as to what to do !! please help me guys !!
Thanks in advance !
Regards.
Click to expand...
Click to collapse
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
defcomg said:
My Cousin Did the Same Exact Thing to his Imate SP3i it also got stuck at 68% it does nothing it was brand new now its paper weight anyway to fix this ?
Click to expand...
Click to collapse
Wright me to PM...
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
defcomg said:
Typhoon Service Manual
http://mikechannon.net/PDF Manuals/HTC_Typhoon_Service_manual.pdf
Feeler Service Manual
http://www.mikechannon.net/PDF Manuals/HTC Feelers Service manual_Rev A01.pdf
Jtag Detection
http://hackaday.com/2007/09/29/automatic-jtag-pinout-detection/
Click to expand...
Click to collapse
For what you want use jtag-pinout-detection? Links on this site are dead, and hear you can find Jtag pins for Typhone: http://forum.xda-developers.com/showthread.php?t=414103