Vista mobile device center Picture tweak - 8525, TyTN, MDA Vario II, JasJam General

See the thumbnail for a preview....
Copy the icon file (extract it from the sync.zip file) to the windows directory of your pda.
Step 2: Windows Mobile Device Center - Reinstall DriverNow that the ICON file is on the device, we need to reinstall the device driver so that WMDC will see it.
1. Make sure the device is synced and connected to your PC. You need an active connection so that Windows Vista sees your handheld device.
2. Go to the Control Panel.
3. Switch the Control Panel to the "Classic View" in the upper left hand corner of the Control Panel windows.
4. Open Device Manager.
5. Click the small "+" in front of "Portable Devices"
6. Right click on "Pocket PC" or "Windows Mobile Device" or "Smartphone" or similar.
7. Click Uninstall
8. Choose OK when prompted about Uninstalling the device.
9. The Device Manager will flash a time or two, and the device will no longer show up on the Portable Devices list.
10. Remove your Device from the computer.
11. Wait a good 30 seconds to 1 minute and then dock (connect) your device to the computer again.
12. Your computer will now be installing the device once again.
13. Open Windows Mobile Device Center, and you should now see your ICON on the left hand side (see picture below), and you have not lost any details of your partnership.
Sometimes the wmdc shows your old picture if that is the case copy the icon file to this directory:
C:\Users\[username]\AppData\Roaming\Microsoft\ActiveSync\Profiles\[some strange code like 8ae71abe]
Good luck guys Would like to hear if it works the same in Windows Mobile 6 (as there is no update for the artemis yet I'm not able to test.)
**Mod Edit for credit**
http://pdaphonehome.com/forums/sams...s-mobile-device-center-picture-icon-hack.html
more specifically here:
http://pdaphonehome.com/forums/608290-post12.html

this works
Perjan said:
See the thumbnail for a preview....
Copy the icon file (extract it from the sync.zip file) to the windows directory of your pda.
Step 2: Windows Mobile Device Center - Reinstall DriverNow that the ICON file is on the device, we need to reinstall the device driver so that WMDC will see it.
1. Make sure the device is synced and connected to your PC. You need an active connection so that Windows Vista sees your handheld device.
2. Go to the Control Panel.
3. Switch the Control Panel to the "Classic View" in the upper left hand corner of the Control Panel windows.
4. Open Device Manager.
5. Click the small "+" in front of "Portable Devices"
6. Right click on "Pocket PC" or "Windows Mobile Device" or "Smartphone" or similar.
7. Click Uninstall
8. Choose OK when prompted about Uninstalling the device.
9. The Device Manager will flash a time or two, and the device will no longer show up on the Portable Devices list.
10. Remove your Device from the computer.
11. Wait a good 30 seconds to 1 minute and then dock (connect) your device to the computer again.
12. Your computer will now be installing the device once again.
13. Open Windows Mobile Device Center, and you should now see your ICON on the left hand side (see picture below), and you have not lost any details of your partnership.
Sometimes the wmdc shows your old picture if that is the case copy the icon file to this directory:
C:\Users\[username]\AppData\Roaming\Microsoft\ActiveSync\Profiles\[some strange code like 8ae71abe]
Good luck guys Would like to hear if it works the same in Windows Mobile 6 (as there is no update for the artemis yet I'm not able to test.)
Click to expand...
Click to collapse
I am runninig WM6 BLACK 2.0 and just syncronise without doing any fixes to my computer and it recognises my t-mobile mda pro flawleslly.
maybe something to do with WM 6

Very very good..... Good work, Bro.

Perjan said:
Would like to hear if it works the same in Windows Mobile 6 (as there is no update for the artemis yet I'm not able to test.)
Click to expand...
Click to collapse
Man... it works with WM6 just like with WM5

Shamanix said:
Man... it works with WM6 just like with WM5
Click to expand...
Click to collapse
Good to hear.

Guys, this hack was originally posted by mrailing on PDAPhoneHome, a fabulous site. See here for the original post. When offering your "sincerest form of flattery", please plagiarise with a credit to the original brain behind your inspiration. I know I don't, always, hackers never could greet everyone they should, but it's just polite to do so!
V

vijay555 said:
Guys, this hack was originally posted by mrailing on PDAPhoneHome, a fabulous site. See here for the original post. When offering your "sincerest form of flattery", please plagiarise with a credit to the original brain behind your inspiration. I know I don't, always, hackers never could greet everyone they should, but it's just polite to do so!
V
Click to expand...
Click to collapse
you must have posted this the same time i was making the edit

vijay555 said:
Guys, this hack was originally posted by mrailing on PDAPhoneHome, a fabulous site. See here for the original post. When offering your "sincerest form of flattery", please plagiarise with a credit to the original brain behind your inspiration. I know I don't, always, hackers never could greet everyone they should, but it's just polite to do so!
V
Click to expand...
Click to collapse
Got it from another site but that does not matter. Never claimed it was my own. Just posted it here and created the Icon because people on the artemis forum asked one for the hermes and herald. Did not mention any harm to it...

Perjan said:
Got it from another site but that does not matter. Never claimed it was my own. Just posted it here and created the Icon because people on the artemis forum asked one for the hermes and herald. Did not mention any harm to it...
Click to expand...
Click to collapse
You have to understand that if you don't quote the source, you are indirectly claiming it to be your own work, which may offend the creator, for starters, as I know he (Michael) spent time and effort on this wonderful tweak.
Don't worry too much about it, as we are keen to share information here, but just make sure the source is quoted next time - we just want to maintain a good relationship with the other sites.

For those who like to show Dopod U1000 in the Vista's Windows Mobile Device Center, here's the file. Just rename the one you like to "sync.ico" and follow the instructions at the beginning of this thread.

cayotte said:
I've spent about 3 hours to create the Dopod U1000's icons. For those who like to show Dopod U1000 in the Vista's Windows Mobile Device Center, here's the file. Just rename the one you like to "sync.ico" and follow the instructions at the beginning of this thread.
Click to expand...
Click to collapse
3 hours? What happened?

Related

how on mda do i

look inside the windows folder on my comp...ive tried on windows xp and vista...is there a sertain program?...
I don't understand the question. Are you trying to browse to your computer from your PDA?
If you are sitting in front of your computer, and you can't use Windows Explorer to navigate to your Windows directory, and you can't do it on XP or Vista, then I think you aren't doing something correctly.
killacam13 said:
look inside the windows folder on my comp...ive tried on windows xp and vista...is there a sertain program?...
Click to expand...
Click to collapse
let me answer with a link to a thread with similar question to which i replied lately
http://forum.xda-developers.com/showthread.php?t=304627
i use network drives sharing via wifi or usb cable - works great. good luck
the windows folder on my phone on my comp
like connecting my phone to change my phones windows folder...threw my computer...
killacam13 said:
...threw my computer...
Click to expand...
Click to collapse
Dont physically abuse the computer just because you cant operate it. Perhaps you cant see the files because they are hidden?
LOL but seriously how would i access the t-mobile mda windows file from my computer?
Bring up activesync click explore then click My Windows Mobile-Based Device then click the windows folder. Sometime it takes a while for it to come up so all you'll have is a white screen. I've seen it take up to 45 seconds to bring it up finally so don't get impatient if it doesn't come right up. If that doesn't work then there's something definitely wrong somewhere.
I kno wut u r talking about it just doesn't sho up...any way else?
Do any of the folders on your phone show up when you browse your phone through activesync? Does it show the files in it when you browse to it on your phone itself using either file explorer or total commander?
Just as I was writing this I had another thought that it might be. It's possible that they are just hidden. Click on browse on activesync, then in the window it opens on your computer click on the tools link at the top and then folder options and then on the View tab at the top then go to the Hidden files and folders option and change it to show hidden files and folders.
If that doesn't fix it then it's probably time to uninstall and reinstall activesync and try again.
yes all files show up except windows...ill look and c if it is hidden...TY!
Update - Yes they were just hidden but thanks for the guidance!

8525 WM6 with broken LCD, How to see it in my home PC?

I'm searching for a program to see the screen of the 8525 in my home PC, in the past I did it but I cant remember the name of the program, I was in a motorcycle accident and my lcd died inside my pocket, please help.
Thank You.
ps. sorry in my english
http://www.handango.com/PlatformPro...D8831476&N=4294918372&R=18480&productId=18480
Yow man just check your private messages.
Thank You!
Dont buy any software!
The powertoys from microsoft, for ppc2003 come with remote display AND it can be made to work on WM5 and WM6!
http://www.microsoft.com/downloads/...D6-1DCC-47AA-AB28-6A2B006EDFE9&displaylang=en
Install the powertoy on your pc only.
Browse to;
C:\Program Files\Windows Mobile Developer Power Toys\ActiveSync_Remote_Display\devices\wce400\armv4t
copy cerdisp2.exe to the windows folder on your device and viola!
Just run the program from windows.
You will get a pop up message in windows about an unknown CPU type...just click on ok.
You will have to manually end the program on your device by clicking on the icon in the system tray and selecting exit.
But hey it's free!
Andy Phillips said:
The powertoys from microsoft, for ppc2003 come with remote display AND it can be made to work on WM5 and WM6!
http://www.microsoft.com/downloads/...D6-1DCC-47AA-AB28-6A2B006EDFE9&displaylang=en
Install the powertoy on your pc only.
Browse to;
C:\Program Files\Windows Mobile Developer Power Toys\ActiveSync_Remote_Display\devices\wce400\armv4t
copy cerdisp2.exe to the windows folder on your device and viola!
Just run the program from windows.
You will get a pop up message in windows about an unknown CPU type...just click on ok.
You will have to manually end the program on your device by clicking on the icon in the system tray and selecting exit.
But hey it's free!
Click to expand...
Click to collapse
WoW! I found something similar, but the workaround is quite simpler.
This is the site for the app: http://www.mtux.com/ (free as well)
This is the workaround:
Run the installer while you're syncd and hit the left soft key on your ppc twice to install on ur device.
Good Money
Excellent!!!!!
I can see my screen now in my PC.
Yesterday I purchased the LCD and Digitzer on ebay in $68.00 us with shipping, will fix it in a week, anyone know where I can purchase the front housing and keypad, they got scratches and my 8525 was in mint condition before my accident.
vijovame said:
Excellent!!!!!
I can see my screen now in my PC.
Yesterday I purchased the LCD and Digitzer on ebay in $68.00 us with shipping, will fix it in a week, anyone know where I can purchase the front housing and keypad, they got scratches and my 8525 was in mint condition before my accident.
Click to expand...
Click to collapse
Check out this SITE posted in this THREAD
This ebay auction has approximately 3 days left, but it appears to be the complete set of 8525 OEM parts.
This LINK is a bit pricey but has a nice selection of parts.
Hey, which app did you end up using to view your ppc on ur pc?
Raspberry Software's True Connect 2.0 is a gfood product for this also.
g0dZpr1z0n3r said:
Check out this SITE posted in this THREAD
This ebay auction has approximately 3 days left, but it appears to be the complete set of 8525 OEM parts.
This LINK is a bit pricey but has a nice selection of parts.
Hey, which app did you end up using to view your ppc on ur pc?
Click to expand...
Click to collapse
Thanks, the links was very usefull, I used cnn.cn in the 2005 and forgot it, I used pocket controller pro......

Full WM6 or 6.1 on Shift

Everyone,
This is one of my first posts. I have been reading the threads on this and cannot make heads or tails of what's going on. I have a Shift for eval purposes and after playing around with it, I think it's a pretty amazing device. HTC has crippled the phone capability in the US versions because they haven't certified it for voice use with the FCC yet. If we can access "file explorer" and some of the other features of WM6, I think a lot can be done to modify it or even to use it for voice. Has anybody made any headway as far as a new ROM that enables all of this functionality?
No
nobody has yet developed the crack. The reason is because nobody has the machine yet. Can u comment a bit about the battery life. Is it very disappointing?
well, now that several people actually have the device in-hand, could somebody please confirm that the ability to expose full WM6 exists as described by Pawel062:
Pawel062 said:
hmm dont really understand the last part about snapvue. the snapvue for athena is snapvue from shift with a small mod to re enable the softkeys and start menu. it will work on shift and also re enable the soft keys and start menu making the shift's wm6 "Full" again
Click to expand...
Click to collapse
This is the only thing holding me back from ordering one myself!
This is the only thing holding me back from ordering one myself!
Click to expand...
Click to collapse
Me too!
So Any luck running/installing any other programs on SnapVue?
greetz,
Pfeffa-rah
what about athena projects rom? that rom is actually from shift right?
snapvue is actually a today plugin pretty much. it hides the soft keys and start menu of the original wm6. then from the plugin u have access to messaging, settings, and other basic stuff.
this is ment so u use vista but with only 2hrs max battery on vista many people would like to use the less power hungry wm6. i am working with paul from modaco.com on re enabling the full wm6 by putting a modded dll that will unhide the start menu. after that ull be able to get into file explorer and get a reg editor to re enable the soft keys.
heres the challlenge:
--no usb port like regular htc phones to sync the shift and get the dll on their. only usb host
--no bluetooth in snapvue/wm6 side
--no wifi in snapvue/wm6 side
--no ir in wm6 side
--vista device central doesnt see the wm6 side
--cant save files from email to windows folder
and i cant remember now the other blockades. i will continue working on it though.
Seems like that there is some kind of file transfer, it uses it when you install a certificate in shift control center, but how to crack it open or replicate the process for other files, and then execute the file on snapvue site ....
Think its time for a "taskforce thred" where all info is posted so everyone can work on it.
Sounds a lot more difficult then I first imagined....
(No BT??? OMG! had no idea!)
Sounds like I have to be a bit more patient...
This doesnot sound like it´s gonna be solved in a couple of days....
It´s great that you´re workin on it guys!
greetz,
Pfeffa-rah
thanks Pawel062, I appreciate your efforts in trying to find a way to get this to work!
Just saw if you edit a contact and then try to attach a picture, you can browse the WM6 folders.
Unfortunately you can only see the pictures, because it's using the picture manager from HTC..
Silly thought: The miniUSB connector on the dongle formally is only meant to provide additional power to devices that otherwise would not be detected (External Harddrives etc). Would it be a silly thought to assume that the same miniUSB port could somehow allow us to access the SnapVue part? The miniUSB port is located at the back next to the cable leading back to the Shift.
I hadn't even noticed that.
I just plugged mine in for the first time, the only drivers Vista installs are for a Generic USB Hub and a USB to Ethernet Adaptor. There doesn't seem to be anything else hidden in there.
If anyone needs anything tested on a shift dont hesitate to ask. Full WM6 functionality would be greatly appreciated and would turn snapview from a gimick into a usefull tool.
OK so thanks to Michael who commented on Browsing using Contacts and Pictures, I managed to gain access to the Windows Mobile File Explorer and other software on the device.
First step is to create a new email.
From the menu Insert - Picture.
Using the browse capability go to the Windows folder
Locate Start Menu and press Ctrl C
Browse to Settings
Press Ctrl V
Go to Snapvue homescreen and goto Settings
Start Menu will be visible and you can then access File Explorer etc.
Hope this helps....
Excellent. I have sent myself the executable of PHM.lu's regedit, saved it into my documents, and am now able to access and edit the registry!
Wiz said:
Excellent. I have sent myself the executable of PHM.lu's regedit, saved it into my documents, and am now able to access and edit the registry!
Click to expand...
Click to collapse
Great! Any possibilty to enable blocked things like office or is it not installed?
Also in my limited investigations, I have managed to almost access Windows Vista from the Windows Mobile side.
Using Resco's Explorer with its Network Access functionality, I performed the following.
Under Windows Vista, run the ShagCtrl application.
Install a Certificate, this can be any file you like.
You will see the progress bar appear and drop up and down. If you listen you will hear the sound of a new device being added.
Do NOT click OK when prompted as this will remove the device.
If you load up Device manager, you will see an "NDIS shared Internet connection" (or something similar) appear under network connections.
If you open CMD and run an IPConfig, you will see that this connection has an IP Address of 192.168.160.102 and a gateway and DHCP server of 192.168.160.1.
From the Windows Mobile side, load Resco Explorer and goto Menu - File - Network - Map Drive
In the dialog that appears, you should see Computers near Me (or similar) and under here should be your Vista machine.
If you share a drive, or select the Vista computer and put \c$ on the end, it should try to connect.
This is as far as it gets me so far. Was a late one, but I couldnt get it to actually connect.
So close yet so far.
In Addition, if you try to run a cab file it will error. This is because HTC have remove the Open command file association for Cab files.
Using your favourite WM registry editor goto HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command\.
Under Default type
wceload.exe "%1" /nodelete
cab files will now install correctly.
Hope this helps...
Hi,
I ama anew user of Shift. I am did not understand clearly what did you mean about full WM6 or 6.1. Knows somebody how can we have a full WM6 on it? Pls help me I really need a full WM6 system also.
Thx.
Ok, so I've accessed the Start menu using Vs1979s instructions, and I've found that Windows Live messenger is on the device and works ok. I'd like to try and install Opera, but I need a registry editor that isn't a CAB file in order to add back in the registry key to support CAB files - can someone point me in the direction of one?
Thanks,
Dave
Vs1979 said:
Also in my limited investigations, I have managed to almost access Windows Vista from the Windows Mobile side.
Using Resco's Explorer with its Network Access functionality, I performed the following.
Under Windows Vista, run the ShagCtrl application.
Install a Certificate, this can be any file you like.
You will see the progress bar appear and drop up and down. If you listen you will hear the sound of a new device being added.
Do NOT click OK when prompted as this will remove the device.
If you load up Device manager, you will see an "NDIS shared Internet connection" (or something similar) appear under network connections.
If you open CMD and run an IPConfig, you will see that this connection has an IP Address of 192.168.160.102 and a gateway and DHCP server of 192.168.160.1.
From the Windows Mobile side, load Resco Explorer and goto Menu - File - Network - Map Drive
In the dialog that appears, you should see Computers near Me (or similar) and under here should be your Vista machine.
If you share a drive, or select the Vista computer and put \c$ on the end, it should try to connect.
This is as far as it gets me so far. Was a late one, but I couldnt get it to actually connect.
So close yet so far.
In Addition, if you try to run a cab file it will error. This is because HTC have remove the Open command file association for Cab files.
Using your favourite WM registry editor goto HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command\.
Under Default type
wceload.exe "%1" /nodelete
cab files will now install correctly.
Hope this helps...
Click to expand...
Click to collapse
How did you load Resco Explorer on Snapvue?

Full Instructions for getting WM6, RealVGA, Office and IE

I have written out a full set of instructions for getting WM6, RealVGA, IE and Office on a Shift, which I have tested out today.
All the required files except the Office cab, which I can't seem to upload, are here.
Instructions.txt is the complete set of instructions, for convenience.
An office cab can be found at http://rapidshare.com/files/94010776/jimm98y_office2007.CAB
Be careful with the RealVGA bit if you haven't got an English machine - I have so I couldn't test this bit - I inferred the solution from one of Daniel's posts.
1. Reset SnapVue if you have been hacking it.
- Run Clearstorage.exe (or Settings, Clear Storage)
- Disable Wi-Fi in Vista (Communication Manager)
- Enable Modem
2. Get Access to WM6
- In SnapVue, click Outlook E-mail
- Click Menu,New
- Click Menu,New,Insert Picture
- Where it says "My Pictures", click and navigate to "Windows" directory
- Highlight (using arrow keys) the "Start Menu" directory and copy it (using ctrl-c)
- Navigate into "Settings" directory in "Windows" and paste (ctrl-v). Ignore the calendar error.
- Click Ok and go back to SnapVue.
- Click Settings button and then "Start Menu, Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Using "Tools, Folder Options" (alt T,O), click on the View tab and make sure that "Hide protected operating system files (Recommended)" is NOT enabled.
- Copy "RegistryEditor.exe" to "Pocket_PC,"\" directory.
- Still on Vista side, Using "Communication Manager", Click "Advanced Settings" and then "Reset Snapvue". Click OK.
- Switch to snapvue and wait for it to start up. If you miss the warning to allow running "RegistryEditor.exe", don't worry - click setting, Start Menu, Programs, File Explorer, then navigate to Windows, StartUp and run it from there.
- In RegistryEditor.exe, navigate to HKEY_LOCAL_MACHINE, Services. Delete the "SnapVue" entry. Click and hold the "SnapVue" entry until the context-sensitive menu appears, then select delete.
- Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete - there is a space after the .exe and before the /nodelete here
- Close RegistryEditor.exe.
- In File Explorer, delete the PKG.exe and BlockTitleBar.exe files from the Windows\StartUp directory.
- Switch back to Vista and reset snapvue from Communications Manager's Advanced Settings.
- Switch back to SnapVue. When it has finished starting up and you have closed RegistryEditor, you will notice that you have the start menu at the top left of the screen.
- Tidy up - reset and delete "Start Menu" from the "Windows, Settings" directory
Pat yourself on the back! You have successfully converted the HTC shift's SnapVue to WM6.
2a. Enable all the hidden "Today" items
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- In Vista, install and run ceregedit_setup.exe
- Press F1 to connect to WM6
- Use Tools, Unlock Registry to enable the import
- Use Edit, Import to import "today.reg". Ignore any errors.
- Close ceregedit
- Switch to WM6
- In "Start Menu, Settings, Today, Items", pick the today items you want to display.
3. Change the display resolution to 96 dpi
A word of warning - this version of RealVGA is English and does not work very well with non-English systems.
- If you have a non-English version of the Shift, then you will not have a directory called \Windows\StartUp. Before doing the rest of this section, you should create a "StartUp" directory in your Windows directory and copy all of the files from your language equivalent of StartUp.
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Copy "RealVGA_11.CAB" and "ResPack96dpi.ARM.CAB" to "Pocket_PC,"\" directory.
- Switch over to WM6
- From File Explorer (Start Menu, Programs, File Explorer), navigate to the top directory (using Up button as necessary)
- Install RealVGA_11.CAB accepting the security warning
- Install ResPack96dpi.ARM.CAB accepting the security warning and select ok to restart the system
- Run RealVGA from Start Menu, Programs
- Change to 96dpi and press OK and wait while the system restarts
- Tidy up - Using "Start Menu, Settings, System, Remove Programs" remove WM6_RealVGA (its job is done)
- In File Explorer, delete the 2 CAB files.
Pat yourself on the back again! You have successfully made HTC shift's WM6 much more usable.
4. Install Office 6.1
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Copy "office2007.CAB" to "Pocket_PC,"\" directory.
- Switch over to WM6
- From File Explorer (Start Menu, Programs, File Explorer), navigate to the top directory (using Up button as necessary)
- Install office2007.CAB accepting the security warning
- Wait - this is a relatively big install.
- When told to, click OK to restart
- Tidy Up - Start Excel Mobile from "Start Menu, Programs, Office Mobile" and delete all 3 workbooks.
- Start Word Mobile and delete any templates you do not want. You MUST leave one of them (Word Document .docx is the default so you must not delete this until you have changed Word options)
- In File Manager, delete the CAB file.
5. Install Internet Explorer
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- Copy the "ie61" directory to the "Pocket_PC,"\","Windows" directory.
- Switch to WM6
- Start File Explorer
- Navigate to Windows, ie61
- Install Certs.cab and then delete the cab file
- Copy all the other files up to the Windows directory - some files cannot be copied. This doesn't seem to be a problem.
- Restart WM6
- Test IE
- Tidy Up - delete the ie61 directory from Windows directory.
That's it! Congratulate yourself on a job well done.
If you've done all the above, you should have 21.43Mb free storage.
Big thanks to Tito for putting this together in a coherent manner, and for all those who have benefited from this info, there is plenty more to come.
Once the Shift Project receive enough donations to purchase a Shift to work on, we are looking at getting access to the SD card, GPS, Custom ROMs and more.
If we have helped you already, a few dollars donation from you would go a long way.
See this thread to donate, and for a running total so far.
http://forum.xda-developers.com/showthread.php?t=376111
Typo removed....
Hey Tito great work. One small comment, another solution to the accessing device through Vista is to use the USBTool (detailed in the main Full WM6 or 6.1 on Shift thread). I only say this as I and some others have commented how unstable the Internet Sharing solution can be. So far with USBTool I have had no issues. Best use (cost wise from data package) is to use Internet Sharing first time to copy USBTool over then use that. Only comment to an otherwise top notch walkthrough. Thanks for taking the time to structure it correctly.
Great job! My compliments about this easy newbie tutorial.
Pantaloonie said:
NOTE - There is a typo in the above write up, in the Get Access to WM6 section. The line
Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe ''%''1 /nodelete
should read
Navigate to HKEY_CLASSES_ROOT\Cabfile\Shell\Open\command and change the default value to wceload.exe "%1" /nodelete
Click to expand...
Click to collapse
Thanks Pantaloonie - I've changed the original post and the instructions.
Vs1979 said:
Hey Tito great work. One small comment, another solution to the accessing device through Vista is to use the USBTool (detailed in the main Full WM6 or 6.1 on Shift thread). I only say this as I and some others have commented how unstable the Internet Sharing solution can be. So far with USBTool I have had no issues. Best use (cost wise from data package) is to use Internet Sharing first time to copy USBTool over then use that. Only comment to an otherwise top notch walkthrough. Thanks for taking the time to structure it correctly.
Click to expand...
Click to collapse
I tried USBTool but I couldn't get it to do anything - I'll try it again and update the post when I've worked it out.
[email protected] said:
I tried USBTool but I couldn't get it to do anything - I'll try it again and update the post when I've worked it out.
Click to expand...
Click to collapse
Hi Tito,
Thanks a lot for this post. Pls try to help me.I have aproblem with Win Explorer. I am not able to find Pocket_PC directory. Pls help me how can I find it. I did not undderstand abou F5 pressing. It is nott working me.
Thax. NA
To get usbtool.exe to work -
Download the attached file, unzip it, and get it into the windows folder on the WinMo side. This may involve removing the .exe extension so you can email it to yourself, then putting the .exe back when you save it into windows.
Then, on WinMo. browse to the windows folder and run usbtool.exe.
You get a white screen with the message "Please plug in cable first".
Click on menu and select 'usb cable in'.
Then go back to Vista and wait for up to one minute.
You should hear the connecting noise, and Windows Mobile Device Centre will connect. You can then sync Vista with WinMo. You should also be able to find WinMo under My Computer, as a mobile device.
Disconnect by going back to WinMo usbtool screen, and select 'usb cable out'.
Cannot click "Connect" ??
Hi,
I am trying to follow the instruction:
"- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection."
BUT - the Connect button is greyed out, because I have no network connection on the WM side.
How do I create one ? Do I need to have a UMTS sim card to do this ? I don't get it... :-((.
Please give me a hint !
jarbi said:
Hi,
I am trying to follow the instruction:
"- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection."
BUT - the connection button is greyed out, because I have no network connection on the WM side.
How do I create one ? Do I need to have a UMTS sim card to do this ? I don't get it... :-((.
Please give me a hint !
Click to expand...
Click to collapse
I'd suggest you forget the internet sharing method, and use the usbtool.exe method intead, it's pretty much foolproof.
Pantaloonie said:
I'd suggest you forget the internet sharing method, and use the usbtool.exe method intead, it's pretty much foolproof.
Click to expand...
Click to collapse
Pantaloonie,
Thanks for your reply. So, when I understand it correctly there is no way to connect to WM when I don't have a data subscription, at least to mail usbtool to WM.
Am I right ?
[email protected] said:
2a. Enable all the hidden "Today" items
- Switch to WM6
- Click "Start Menu (icon at top left of screen), Programs, Internet Sharing"
- Click "Connect". The screen will say "Check USB cable.". Switch over to Vista and make sure that you have a network connection.
If not - go to Vista Connection Manager and stop and start the modem.
- go back to snapview disconnect and then connect again
- switch back to Vista
- Switch back to snapvue and click disconnect.
- Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
- In Vista, install and run ceregedit_setup.exe
- Press F1 to connect to WM6
- Use Tools, Unlock Registry to enable the import
- Use Edit, Import to import "today.reg". Ignore any errors.
- Close ceregedit
- Switch to WM6
- In "Start Menu, Settings, Today, Items", pick the today items you want to display.
Click to expand...
Click to collapse
Hi Tito,
First I want to thank you and everybody who worked on this tutorial and made our HTC Shift much more usefull.
I followed your instructions step by step except for the connection to Vista where I used the USBtools instead. Everything worked fine and the results are impressive. The only thing that didn't work out for me was the import of the "today.reg" file with ceregedit. I keep getting an 'access denied' error and the import aborts. Do you have any idea how I can get that "today.reg" file into the registry of WM6? If I can get this to work than I think the HTC Shift is the perfect umpc for me.
I discovered also a nice feature: when WM6 is connected to Vista using the USBtools and Vista is connected to the internet using the wireless connection then you can use that connection also in WM6. You can receive your e-mail and surf on the internet in WM6 whilst the phone connection is off.
Thanks again and keep up the great work.
jarbi said:
Pantaloonie,
Thanks for your reply. So, when I understand it correctly there is no way to connect to WM when I don't have a data subscription, at least to mail usbtool to WM.
Am I right ?
Click to expand...
Click to collapse
Yes, you will need a data enabled sim to get the initial files onto the Winmo side, no way around that.
sonietje said:
Hi Tito,
First I want to thank you and everybody who worked on this tutorial and made our HTC Shift much more usefull.
I followed your instructions step by step except for the connection to Vista where I used the USBtools instead. Everything worked fine and the results are impressive. The only thing that didn't work out for me was the import of the "today.reg" file with ceregedit. I keep getting an 'access denied' error and the import aborts. Do you have any idea how I can get that "today.reg" file into the registry of WM6? If I can get this to work than I think the HTC Shift is the perfect umpc for me.
I discovered also a nice feature: when WM6 is connected to Vista using the USBtools and Vista is connected to the internet using the wireless connection then you can use that connection also in WM6. You can receive your e-mail and surf on the internet in WM6 whilst the phone connection is off.
Thanks again and keep up the great work.
Click to expand...
Click to collapse
pls let me know how did you do this:
Switch back to Vista and open Windows Explorer. From the "Computer" level, keep pressing F5 until you see Pocket_PC.
I can not find Pocket_PC.
Can somebody help me?
thx.
'Pocket_PC' is the name of the WM6 device when connected to Vista. I made a partnership and named my device SnapVue. So everywhere Tito refers to 'Pocket_PC' you should replace this with the name of your device. Hope this helps.
sonietje said:
'Pocket_PC' is the name of the WM6 device when connected to Vista. I made a partnership and named my device SnapVue. So everywhere Tito refers to 'Pocket_PC' you should replace this with the name of your device. Hope this helps.
Click to expand...
Click to collapse
pls write me ste by step to make a partnershipt. Thx.
nemeth said:
pls write me ste by step to make a partnershipt. Thx.
Click to expand...
Click to collapse
http://forum.xda-developers.com/showpost.php?p=2029053&postcount=9
sonietje said:
The only thing that didn't work out for me was the import of the "today.reg" file with ceregedit. I keep getting an 'access denied' error and the import aborts. Do you have any idea how I can get that "today.reg" file into the registry of WM6? If I can get this to work than I think the HTC Shift is the perfect umpc for me.
Click to expand...
Click to collapse
I have the same problem.
sonietje said:
F. The only thing that didn't work out for me was the import of the "today.reg" file with ceregedit. I keep getting an 'access denied' error and the import aborts. Do you have any idea how I can get that "today.reg" file into the registry of WM6?
Click to expand...
Click to collapse
Ok, I've looked into this and it seems that ceregedit cannot import the today.reg file.
I managed to import it correctly using SKTools, install it on the WinMo side and use the built in registry editor to import the file.

HINT ! - Access WinMo from Vista side

Just a hint for all the real developers out here.
in the Vista Part, one can click a button to "install SSL certificate to WinMo-side"
It's done via a button that can be accessed from Vista Communication Manager (Shift soft-key upper right corner, press advanced settings)
What happens there is that Vista connects to the WinMo side without setting up an ActiveSync connection. It has file access. It installs a certificate in WinMo.
So.. there's a CALL there that actually has access from Vista to WinMo.
Maybe people can dissasemble that part and do something really good with it ?
There IS access from Vista to the WinMo part without ActiveSync running.
lucid said:
Just a hint for all the real developers out here.
in the Vista Part, one can click a button to "install SSL certificate to WinMo-side"
It's done via a button that can be accessed from Vista Communication Manager (Shift soft-key upper right corner, press advanced settings)
What happens there is that Vista connects to the WinMo side without setting up an ActiveSync connection. It has file access. It installs a certificate in WinMo.
So.. there's a CALL there that actually has access from Vista to WinMo.
Maybe people can dissasemble that part and do something really good with it ?
There IS access from Vista to the WinMo part without ActiveSync running.
Click to expand...
Click to collapse
please read more threads before posting one
my enter bootloader app (i posted a thread on that) accesses the WM part just fine without any activesync.
that happens through the EC driver (stands for Embedded Controller). you can do quite a lot with the EC driver (from changing various settings to getting ROM version, entering bootloader is just one of those things). though i would think that file sending works a bit different, but interesting, i'll look into that.
cmonex said:
please read more threads before posting one
my enter bootloader app (i posted a thread on that) accesses the WM part just fine without any activesync.
that happens through the EC driver (stands for Embedded Controller). you can do quite a lot with the EC driver (from changing various settings to getting ROM version, entering bootloader is just one of those things). though i would think that file sending works a bit different, but interesting, i'll look into that.
Click to expand...
Click to collapse
---
I should do better posts... I knew about your tool.
I just want to say that without ANY hacks whatsoever, there IS a connection between Vista and WinMo at "file transfer" level. Just like the hint I gave about the microphone.
I'm not a developer. I try to help guys like you with some remarks. A factory clean Shift does filetransfers via that button, somewhere my "gut" told me I should post about this , as I haven't seen any post addressing this "option" Hope you use it to our advantage.
lucid said:
---
I should do better posts... I knew about your tool.
I just want to say that without ANY hacks whatsoever, there IS a connection between Vista and WinMo at "file transfer" level. Just like the hint I gave about the microphone.
I'm not a developer. I try to help guys like you with some remarks. A factory clean Shift does filetransfers via that button, somewhere my "gut" told me I should post about this , as I haven't seen any post addressing this "option" Hope you use it to our advantage.
Click to expand...
Click to collapse
oh i like your posts, don't worry about that part. it is an interesting discovery along with the microphone one. hope you'll make more discoveries
when i get my Shift i can try this out and look more deep into it.
update
I tried to send some files over to snapvue using this option
the progress bar completes, then vista says cert install failed. the files are not there in snapvue.
what kind of sertificates you tried to send to WinMo-side? Could it be traced what happens when you run this command?
sniveri said:
what kind of sertificates you tried to send to WinMo-side? Could it be traced what happens when you run this command?
Click to expand...
Click to collapse
not true certificates, mind you, I wanted a way to avoid using a sim card to send usbtool over.
what happens is probably the shagcontrol (yeah, I mean the shift control center but this name is funnier) starts communication over crappy udp protocol with winsock2 (1 try out of 5 failed to fully send and in general was very slow) to EC driver then somehow magically the bytes get sent over to WM. probably the WM IPC driver is responsible for receiving, no idea, haven't checked this yet specifically.
update though, if you create a folder named Certificate under Windows/Settings, shagcontrol will report that the transfer was successful and that you should switch to SnapVue to finish installation. bad luck though, SnapVue *****es about the cert not being valid, and I don't see the file anywhere (probably gets deleted automatically). I heard someone was able to get their hands on a file transferred in such a way but no idea how.
Could it be possible to create service that watches this sertificates folder and creates automatically copies of new files to somewhere?
I think that this sertificate tool is made for administrators and those sertificate-files are not meant to stay on any folder because then user could easily copy those sertificates to other devices. So there is possibility that we can not transfer files this way but maybe using same route to destination.
sniveri said:
Could it be possible to create service that watches this sertificates folder and creates automatically copies of new files to somewhere?
I think that this sertificate tool is made for administrators and those sertificate-files are not meant to stay on any folder because then user could easily copy those sertificates to other devices. So there is possibility that we can not transfer files this way but maybe using same route to destination.
Click to expand...
Click to collapse
service, OK, the problem is you'd have to get the service onto the shift somehow.
what I wanted was fully eliminate the requirement of a sim card and usage of gprs/hsdpa to copy the usbtool over
though I guess if you really want that you can abuse the shared internet connection for file sending in the way danielherrero discovered, *but* not sure if that works with an invalid APN.
right, it gets under \Temp as user.cer, sometimes.

Categories

Resources