Related
Hi, I just bought a MDA Vario and downloaded the software to sim-unlock it. I've been using it on Vodafone for a few days and have some problems:
Wi-Fi:
I can turn wireless on, but when I then go to IE to start surfing, it tries to connect using GPRS instead of Wi-Fi. How do I get it to use Wi-Fi instead?
Bluetooth:
I can Sync my device to my PC using Active Sync 4.1 over USB, but when trying to do this over bluetooth, I keep getting told that the device can't find a an existing Bluetooth partnership, even though I've set one up (several times)! What could I be doing wrong?
ROMS:
I've got the T-Mobile ROM on my phone, but I'd rather have a standard (non-network specific) ROM. Where can I download such a ROM? Would ther ebe any issues in overwriting the T-Mobile ROM with a Standard one? Which ROM is the "best"?
Regards,
Nirbho
Nirbho said:
Hi, I just bought a MDA Vario and downloaded the software to sim-unlock it. I've been using it on Vodafone for a few days and have some problems:
Wi-Fi:
I can turn wireless on, but when I then go to IE to start surfing, it tries to connect using GPRS instead of Wi-Fi. How do I get it to use Wi-Fi instead?
Click to expand...
Click to collapse
If WiFi is on and connected successfully to the network, it should use WiFi. I sometimes find if I wander about, and the phone loses site of my Access Point without me noticing, the next time I request a webpage it will fire up GPRS. You say you're connected, but it sounds like the Vario doesn't think so. Are you sure you've got WEP/WPA keys correct, and that the Wireless AP isn't using MAC filtering? Have you been able to get onto the net with IE at all, or has it always tried to get out over GPRS instead?
Nirbho said:
Bluetooth:
I can Sync my device to my PC using Active Sync 4.1 over USB, but when trying to do this over bluetooth, I keep getting told that the device can't find a an existing Bluetooth partnership, even though I've set one up (several times)! What could I be doing wrong?
Click to expand...
Click to collapse
When you pair the Vario with the PC, both ends will offer a list of Bluetooth profiles they support. When I tried with my laptop and a 3com BT dongle, despite it working fine with my old iPAQ, the Wizard didn't seem to think that the laptop offered the ActiveSync service (or maybe the laptop didn't think the phone did, I can't remember for sure). You need to make sure that the Vario (if that's the "device" that's complaining) believes the PC is offering ActiveSync as a Bluetooth service, or it will assume it's only paired with other phones, GPS's, headsets etc, but nothing with which it could activesync.
Nirbho said:
ROMS:
I've got the T-Mobile ROM on my phone, but I'd rather have a standard (non-network specific) ROM. Where can I download such a ROM? Would ther ebe any issues in overwriting the T-Mobile ROM with a Standard one? Which ROM is the "best"?
Click to expand...
Click to collapse
The ftp site here hosts a load of ROM's. I don't know of any that are noticeably better all around than any others. I have a Qtek phone, and although the later ROM fixes the BT voice-dial wake-up problem it also breaks, MMS and some bits of WiFi for some people. Others have installed the WWE version of a ROM and found that the keyboard doesn't match their hardware layout and some keys are wrong. They've then gone and broken button mappings trying to fix the keyboard problem. I know T-Mobile are the least subtle in their customisation, and many people seem to want to get rid of the pink look. I don't believe there is a clear winner in the ROM stakes. I've seen a few sigs that suggest people are starting to cook their own ROM with the GSM stack from one, the WiFi from another or whatever combination suits them. If you're up for doing the same, be my guest, but you may, unless you're experienced, find yourself worse off than you are now.
Have a look over in the "upgrading" forum and see what people seem to be using there. Be aware though, a lot of the "old timers" will be using I-Mate or Qtek devices which hit the streets before the O2 and T-Mobile variants, so they have had less device specific customisation done and were probabaly running a generic WWE (or localised) version anyway.
Hope that helps?
Dox.
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
danrw84 said:
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Does wifi turn on? (Does the left LED blink like it does when wifi is turned on?)
If not, then it could be related to a cingular cab - did you install any of the cabs from the original cingular extended rom?
left led does blink.
ive also gotten as far as picking up a network.
i have tried everything, i cannot get my wifi to work at all. i dont know whats up.
the settings i needed (which i replicated for the new rom) on the old rom, was this
I would select networks, MY work network, this connects to the internet.
then in the WLAN adapter i had to manual enter my dns servers.
thats pretty much it to get it to work, but now with this rom it wont
Similar or different problem? Not sure. PARTLY SOLVED!
updated the ROM on my 8125 yesterday. wifi was working before-hand, i had included the DNS servers for my router, which is what i had to do to make it work!
did the same thing after the ROM update and cant get connected to any access points.
any ideas guys?
thanks
Click to expand...
Click to collapse
Hi NG,
I updated my O2 XDA mini s (German) from OS 1.3.4.2 to 2.16.9.1. (Radio 02.07.10 included). To be honest, I was never really happy with the quality and reliabilty of the radio. 4 out of 5 times it did work, but once in a while, especially while roaming, it gave me a headache. After unlocking and updating to the new version, WLAN looks to be working quite well, at least for connecting to access points, but it seems that it can't browse external websites. VXutils give back a socket error trying to access external (outside my home network) websites/Email.
Internal (inside my home network) connections work like a charm. Termincal Services client accesses my Win2003 Server no problem and I can also connect to a website hosted on my internal server. (http://servername:port).
Whenever I try to connect to external sources, the browser stops afer not successfully "locating" the respective server. On the other hand locating might not be the problem. Performing a ping to an external site with VXutils properly picks up the right ip address but cannot send/receive ping!
GPRS works as supposed. Can connect to sites with no problem.
May be somebody experiences the same problem or, even better, has a solution.
By the way I used @Work for all possible settings. The work profile is set up for both connection types.
Besides that, the new rom is really nice
EDIT Well after some time playing around, I have solved the problem or better the problem partly disapeared. In 'Settings' 'Network Adapters' I switched from Use server-assigned IP address to manual and entered IP, DNS, Gateway, etc. With these settings it everything worked after a soft-reset. Going back to DHCP and soft-reset, it first worked an now it doesn't anymore. At least there is a work around and I'm trying now some other things. All machines currently work with the DHCP settings correct. I will check and keep you updated if the problems comes from Server settings or from something in the PDA EDIT
Lars
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.
did you change your Wizard to 802.11g. I found that once I did that, the card stopped working.. the setting was 4, but when i changed it to 8 it stopped worked..
it was some registry key. 802dotg or something ..
sorry i cant rember excatly.[/quote]
Darn it. I did. I'll re-wipe and not load the 54g upgrade. Thx.
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
no i didnt load anything
but i want this wifi to work! what the heck!!
try this
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
Danrw. Concerning the registry settings, after patching the os I did change the registry settings. One already existed with the right value as shown in the 802.11g thread. The other one, DotG, I added.
After that, it did pick up a only G router!
As far as setting DNS manually. It is not enough to just cange the dns setting. You have to enter all the information and even after a soft-reset it takes some time to have the settings picked up... Use vxUTIL 'Info'-Screen to check the current settings. I did test wlan before and after applying packages from the extended rom. No change on reliability or performance on WLAN IMHO.
As far as I understand. Your problem is actually connecting to the router/Access Point. For testing please disable all security on your router and do a soft-reset before trying to access. Also since we have heard of several problems with model 9100 not realizing if an access point is available or not. Also change the SSID of your router and if possible the MAC Address of the router.
Don't forget to soft-reset and first try SDIO Adapter inyour pda with auto IP/DNS/etc. settings.
Another thought. Embarassing, but once I messed around with trying to get a new pda online and forgot to disable the mac filter settings in the router, which resulted in being able to see the active router but it didn't let me connect. After those two days I was missing a lot of hair.
Good luck
Lars
summiter said:
kristiandg said:
danrw84 said:
i get as far as NETWORKS being detected. when i select one of the 3 that i pick up, i cannot connect. My own, pops up, and i get as far as entering the network key, then it tries to connect and doesnt.
this happens WITH or WITHOUT the DNS servers manualy entered in. anyone with some knowledge care to chime in and assist? thanks!
Click to expand...
Click to collapse
I can't get my WiFi card to initialize. After the upgrade, the card stays off. LED doesn't light. Is there a driver somewhere I could try to load?
Click to expand...
Click to collapse
Did you by chance install anything from the cingular extended ROM after you installed the imate ROM?
Click to expand...
Click to collapse
I did but only the minimum. I trimmed down their install to the basics. I narrowed it down to one of two CABs. Either the gprsstall or EnableEONS. I didn't install either of those and I"m now back up and running. Of course, I still can't get it to prefer WiFi to EDGE.
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
eb said:
I had experienced the same problem with home wifi network after upgrading my rom. I saw in my laptop that the key was set to 2. I went to the network cards, clicked on my wifi network, and under Network Key swithed the value from 1 to 2. I can now connect to my wifi network at home.
Click to expand...
Click to collapse
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks
I had same problem after upgrading mda pro with new imate rom 1.30. Can you provide step-by-step tutorial please?I use d-link DSL-G604T wifi router; can connect to home network but when try to surf the web from ppc it always connect through gprs; no access if phone is off.Where can I find Network Key to switch?Any set-up on ppc?
Thanks[/quote]
I do not know if my solution will work for you because I upgraded my rom to 2.16 but lets give it a try. I use d-link DI-524 wifi router. Start menu > Settings > Connections (tab) > Network Cards [I must admit earlier today when I was trying to connect my k-jam to the wifi, I did get as far as it asking me for my authentication code and afterwards it timed-out] --> select your wifi network [at this moment as I'm trying this out my wifi on my k-jam is off] --> Network Key (tab) > it was the key index that I had to change from 1 to 2. Before doing this though, go to your router's wireless configuration page through your webbrowser and make sure the keyX (it looks for d-link this can be from key1 to key4 or at least on mine) and make sure the key index you select on your mda is the same number that is used on your router for code authentication.
Also I noticed after resetting my k-jam that I could get connected to my wifi but I could not surf, in wifi setting on my k-jam I had to hit renew ip and then I was able to surf.
I hope this works for you. Good luck and many late nights.
no luck with this for me
even tried removing wep all together. tried multiple routers.
i can detect the ssid's, but i cant connect to them. times out on the connect.
Mine worked no problem...you may already have had this suggestion but here was my process.
Unlocked with lokwiz
Upgraded
Reset before extended ROM apps installed
Installed total commander
deleted extended ROM
Upgraded again
i re-installed the CINGULAR ROM and WiFi works like a charm
......any clues?
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
kristiandg said:
Here's what I ended up finding out for mine. First, at the time I wrote this, I was running the 2.16 ROM. Now I'm running the 2.17, but the fix is the same with either.
Don't load the cingular add-ins GPRSSTALL or EONS. I narrowed it down to those two that were causing the issue. So, the only ones I install now are CingularMMSAccount, EdgeIcon, TimeStyle, WiFiRate4, and SmartDialingEnable. Thats it, and its all I've seen to be necessary from Cingular's little bundle 'o fun. Everything else I haven't found interferes with my ability to use the phone at all.
Hope this helps...
Click to expand...
Click to collapse
What does timestyle and wifirate4 do? I don't have these installed and haven't seen any problems.
Hi all!
I have an HTC Prophet, which it appears that it cannot detect any Wifi networks at all. I know that it could do so in the past (autodetect etc). After a point of time this was not working but I though that it was simply some mess up with the configuration.
After, however, having gone through a ROM upgrade and still not seeing any Wifi The little icon appears, it seems to search but nothing is found. I wonder what could be wrong? Since the Prophet has taken a few drops I was wondering whether the wifi card (SDIO) or the antenna - if any - has some kind of problem. Is there anyway to check this (e.g. device manager, open-up the prophet etc)?
What else could the source of the problem be?
Thank you very much in advance!
Same problem here... and it has definitly not dropped.....
Same problem here... would be nice to find any solution...
Same problem here with a Prophet G4 with:
IPL: 2.21.0001
SPL: 2.21.0001
Radio ROM: 02.69.21
OS ROM: WM6 PDAVIET 1.1 8mb pool (10.2.0.8)
Tried with different roms, radio roms, etc... So many hard resets after all. No solution. Wifis aren't detected.
Actually with PDAVIET 4.0.0.4 (8mb pool). Nothing changes. Wifi not detecting anything. Sometimes i got "bluetooth hardware error" message...
Make sure the security of your router is set of. Connect your ppc with your router. If you go to your ppc wifi setting you will noticed your Mac Adress. Enter you mac Adress to your router security list. Enable your router security.
MDA_newbie said:
Make sure the security of your router is set of. Connect your ppc with your router. If you go to your ppc wifi setting you will noticed your Mac Adress. Enter you mac Adress to your router security list. Enable your router security.
Click to expand...
Click to collapse
Thanks but that's not the problem. My HP6815 detects wireless networks everywhere. (also at home and at work). Both works without mac filtering or such other security measures.
This is so rare and I am going to create a new Thread because It can be impossible that i'm the only person with this problem in the world.
Evans_Prophet said:
Hi all!
I have an HTC Prophet, which it appears that it cannot detect any Wifi networks at all. I know that it could do so in the past (autodetect etc). After a point of time this was not working but I though that it was simply some mess up with the configuration.
After, however, having gone through a ROM upgrade and still not seeing any Wifi The little icon appears, it seems to search but nothing is found. I wonder what could be wrong? Since the Prophet has taken a few drops I was wondering whether the wifi card (SDIO) or the antenna - if any - has some kind of problem. Is there anyway to check this (e.g. device manager, open-up the prophet etc)?
What else could the source of the problem be?
Thank you very much in advance!
Click to expand...
Click to collapse
My XDA never have been droped. No hits, nothing. it has only 1 month of life. And doesn't work. So forgot a HW a problem (at least, created by YOU. Another question is a random hw failure)
Also, i'm wondering WHY i have "Wi-Fi" and "Wireless LAN" icons on Settings/Connections, if both shows similar information (in different ordered tabs).
I've tried 5 different GSM rom versions. (from 2.07 to last 2.69) from 2.47/61 (i'm not sure) i 've that two icons. In early versions, only "Wireless LAN".
Has anybody this TWO icons??
Do i have to do something special to make the wifi work?
Why my prophet can enable Bluetooth and wifi at the same time?
For example, after a soft reset, i can enable Wifi. (but doesnt detect nothing, of course). In that point, i CANT enable bluetooth in CommManager. I tap on the icon, but it reverts to disabled.
i'm frustrated
wifi not working
I have the same problem. Yes I too have the same icons, and I have also tried different roms. I have also tried wififofum, but that didn't work either. If anyone have a solution, please be kind and tell us.
I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!
I had a problem with my Wifi working when I first got the phone. But since I wanted to SuperCid the phone I had to downgrade the IPL to do so. I re flashed to the same Cingular 1.34 with IPL 1.06. Since then I have not had any problems with the Wifi.
stsanford said:
I've been having a bugger of a time with the Wi-Fi on my 8525. I keep getting a response that the WEP key is incorrect. I was able to connect once, and have since deleted my settings that the Wi-Fi network, but nothing I'm trying seems to get me connected.
Any ideas?
Thanks!
Click to expand...
Click to collapse
Here's a thought. Why not try the Hitchhiker application. It tends to get round quite a few issues in set up. Also once you've got it working and connected to Wifi you can close it down if you wan to and you'll find it has saved correct settings for your normal way of connecting to wifi. Another benefit is that you can cut the wep key from a text document and paste it into the box it gives you (saves a lot of hassle whenever you need to re-enter the key - which in my case is 28 letters digits long!!) WM5 box as you may have discovered does not allow wep pasting!!
You need to have .netframework installed as well byt the link I give you also has a link for that as well:
http://www.kasuei.com/hitchhiker/
Mike
i recently got att 8525 but i havent able to connect wifi with my home network. it asks for wep key, then shows connecting to network and after a while shows wrong network key...no success so far...i even tried the abive hitchhiker sf and all but no luck...has anyone come up with any solution??? i had np connecting 8125 b4...!!!
btw i use wm5 and the most recent att rom update posted on htc site...
hoping for some solution...
I have similar problem too with my cingular 8525. I unlock it to work with t-mobile and also upgrade to wm6 . Now, I can not connect to my home wlan. If I click on wlan, it show my wireless network. But if I click on internet explorer, it show me the default internet window explorer with at & t and window mobile icons. when I click on either one, it take me to media net log in screen. help me
ok, i dont know how but my wifi started working last night!!! b4 it always looked for IP address and eventually disconnects b4 connecting to home network. so i installed "hitchhiker" but no luck either...so i uninstalled and then tried but this time it said connected to network and as soon as i open IE, it disconnects...it looked like wifi connects but then disconnects or timeout due to power settings, so i changed power settings under wifi settings to best performance and now it just connects right away...
--
ellisos020 said:
Just wanted to let everyone know that switching from "best battery" to "best performance" also solved the "incorrect network key" error for me. Thanks Chakli!
Click to expand...
Click to collapse
Thank You Thank you Thank You. I've been at this for a few days now. It would have to be that simple.
Just remember you need to run the remove proxy cab file if proxy is has been set to use GPRS/WAP. Also make sure the right network interface is selected - like work uses 802.11 etc..
I have searched a lot on this forum and have not found any solution to the wifi problem on HTC diamond....I am sure there are experts in this forum who have worked around their way and I would request them to post their comments as to how they have got their WIFI talking on HTC Diamond...........
I am trying connecting to my home wireless network. It finds the network but unable to connect to it. Any help please? Has anyone managed to get it connected to any Wifi? I ahve already set the power management to "best performace...no succes.......
(My laptop and O2 stealth does get connected to the same network and it an open wifi connection)...........PLZ Help.....
There is no wifi problem on the Diamond. it works fine for on every ROM I have used.
It sounds like you haven't set the access key in your Diamond.
wi fi problem........
the_scotsman said:
There is no wifi problem on the Diamond. it works fine for on every ROM I have used.
It sounds like you haven't set the access key in your Diamond.
Click to expand...
Click to collapse
Would be kind enough to elaborate......Mine is open WIFI router, there is no need for any pass keys......my other phone O2 stealth perfectly connects while HTC diamond doesn't.........
Please do have a problem and that the reason there are so many view on this thread in just 30 minutes....
thanking you in advance for your help........
i've never known any problems, have u flashed a cooked ROM or changed the Radio?
if so, i would try going back to stock and see if it works then, if not, send it back as faulty.
I'm not aware of any 'known issue' with the WiFi on the Diamond either, certainly mine and my girlfriend's both work fine in this respect. If you've never successfully connected to any wireless network then you've got a hardware issue; send your phone back to be repaired and stop wasting time looking for a software solution would be my advice.
wifi,,,
Glad that a lot of users doesn't had problem with the wifi, but it's an iminent malfunction, and looks to be a hardware problems...
I had change my rom and radios a lot, and the issues are the same:
Opened the comm manager or the settings-connection-wifi, turn on the wifi, and it's turn off again...
In my case, often worked properly after soft reset, and i often connect with 3g or gprs, but...it's a suck!!!
Step by step......connecting to wifi....
Medulla said:
I'm not aware of any 'known issue' with the WiFi on the Diamond either, certainly mine and my girlfriend's both work fine in this respect. If you've never successfully connected to any wireless network then you've got a hardware issue; send your phone back to be repaired and stop wasting time looking for a software solution would be my advice.
Click to expand...
Click to collapse
Would you please step by step elaborate ....connecting to an open wifi network......will be really greatful........
if your diamond is not connecting to your router there is some posibilities. Are you at home or work, at work on the AP you can have security setings and MAC filtering. At home if you have not implement security and mac filtering you can be to far of your router, You must be between -60 and -80 Db max and at -80 it is easyer with a MIMO router, etc...
Got the same problem as you
this is how i fixed mine.
1) I download a radio rom thing and install it
2) restart the device and the wifi is working perfectly.
No problems at all!
Got the same problem as you
I download a radio rom and install it but still turn off again
HTC touch pro problem wifi
Hello,
I have NOT got connection to secured wifi net. I tried it at home and etc., when I try connect to open wifi, it is OK, but secure wep, wpa etc. is problem,
I reinstall my router at home, I unlocked my HTC and tried all avillable ROM from xda and a chanched different radio.
Now I have got official ROM from HTC - last from page support of HTC,
but problem is here.
I would like restore my ROM, but my pc update had failure and pls help me with this problem.
Try the following:
Change router channel
Try connecting to another router / network LAWFULLY!
Hard reset
Take it to the vendor of the phone