I have already done the registry hack and have the norwegian layout now but since the physical keyboard layout is english it is hard to find the other symbols as software layout has been changed. So is there any way to change the physical keyboard itself to Norwegian? Also where can I find the Norwegian ROM. The phone's selling in local market have the Norwegian ROM.
You want to replace the buttons?
Inphyy said:
You want to replace the buttons?
Click to expand...
Click to collapse
Yes I want to replace them.
Maybe you should try HTC support with that one.
Yes, ask your service center if they can replace it as a spare part. Parts and labour will probably cost.
Related
My O2 XDA Mini S has a QWERTZ keyboard layout, and the WM software uses QWERTY layout, thats why whwn I type using the keyboard, Ive always misused the Y with the Z, and vise versa. Also the symbols are all rumnbled into places. Is there a way I can use the QWETZ layout using the english WM, because I believe that the QWERTZ layout maybe compatible to WM German version. (I dont understant german, so I need the english version). Please help, because I dont think I can do anything with the physical layout of my keyboard so I just need a modification with the software.
you need to edit the keyboard language in the registry. the default is 0409 for english. im not sure what the german one is, but check the wiki, i'm sure you can find out some more info in there.
look at the next post, i figured it out
-Nstefanelli-
Code:
HKCU\ControlPanel\Keybd\Locale = 0407
You have to edit the registry, you need to change it from 0409 to the above.
Good luck.
-Nstefanelli-
Hi. I'm not able to safe any keys in the registry.
Done and rebooted. Edit was gone.
Maybe issue with my Registry editor?
I use the german keyboard as well. The easiest solution to that is the Registry wizard
ftp://ftp.xda-developers.com/Upload/cabs/RegistryWizard_PPC.ARMV4.cab
There you just change the keyboard to German and done with it.
As to the other, you should always wait a couple of minutes before reboot, looks like it actually take some time for the system to write it back into the registry.
In addition, it's moire than just the one key to change.
Bye
In here any simular cab like this, but for Czech qwertz keyboard?
Thanx in advance!
roland valentini said:
I use the german keyboard as well. The easiest solution to that is the Registry wizard
ftp://ftp.xda-developers.com/Upload/cabs/RegistryWizard_PPC.ARMV4.cab
There you just change the keyboard to German and done with it.
As to the other, you should always wait a couple of minutes before reboot, looks like it actually take some time for the system to write it back into the registry.
In addition, it's moire than just the one key to change.
Bye
Click to expand...
Click to collapse
Thanks.
But this location is not working for me
I have the same problem again....
This fix worked for me with wm5 but I just upgraded to wm6 and kb went to qwerty mode (the hardware is a qwertz).
I tried adding the above-mentioned key to the recommended location, and it did not work (that key does not initially exist on wm6).
I also found two keys: \\\registry\hkcu\keyboard layout\preload\default, and \\\registry\hkcu\keyboard layout\preload\1\default, and both of them had e0010409 as the value. I changed them both to e0010407 and tried coldboot after each (one and then both) and it still doesnt thinks its a qwerty keyboard.
Any ideas guys?
Thanks -- AshayinFLA
Hello,
I would like to know whether it was possible to change the hardware keyboard QWERTY to QWERTZ ?
Do you know a website for detached parts for the HTC Shift ?
I'am the english version of the HTC Shift
Thank you very much.
Same problem here, any ideas?
if you want to change the keyboard layout you find here some registry hacks.
(if you use a english rom with german hardware keyboard layout)
or you want to buy a new hardware keyboard with german letters? maybe I have a contact to HTC in germany where I can order a new german or Swiss Keyboard..
I have already searched for registry tweaks, but none of these works for HTC Shift hardware keyboard.
Do you try that?
http://forum.xda-developers.com/showthread.php?t=424136
Yes, but it does not work (on HTC official ROM).
hmm.. do you try with search function on registry editor (you can use the free total commander registry editor) to search for your at the moment installed language code (maybe 409??) and change all entrys that you found to 407?, then you do a soft reset..
same here, i am on a wizard. tried everything. its only new rom's!
Hi.
I just ordered a N1 through a friend and I live in sweden.
Is there a simple way to change the keyboard layout to support swedish characters or if there are some other software that can do the same thing?
Thanks.
Good questions. I constantly change language too, and would be good if it is as easily as the iPhone keyboard.
Glithramir said:
Hi.
I just ordered a N1 through a friend and I live in sweden.
Is there a simple way to change the keyboard layout to support swedish characters or if there are some other software that can do the same thing?
Thanks.
Click to expand...
Click to collapse
On Market search for "Scandinavian Keyboard"
Hey there.
I'm from Germany and thinking of importing the Venue Pro from the US. But I got a question to this Phone.
Is there any possibility to switch the QWERTY Layout to a QWERTZ Layout? It would be nice if "Z" appears on the Phone when pressing Y.
Greets from Bavaria!
signsy
nobody?
Hey,
is there nobody who knows if this is possible?
Cheers!
now it's impossible, couse it has only one (US) keyboard. And there is no access to a registry on this device to make a new keyboard layout
i just had my Venue Pro exchanged (warranty exchange). However it is US version, physical KB works like german KB... there must be a way to fix this.
this sucks...
Using the EM app (check here: http://forum.xda-developers.com/showpost.php?p=16186171&postcount=1), you can enable the app to display additional options. There you find a keypad layout setting under "Service Center".
Have fun!
Hello,
after 5 years my Wizard is died so I diceded to buy a new one!
I found a very cheap QWERTZ but I need a QWERTY keyboard (as mine is) so, if I buy it, I have to change the registry keys... But what will happen after that? If I'll type "Z" on the keyboard it will write "Y" on the screen?
If yes, do you think I can swap the two hardware keyboards to allign software and hardware?
Thanks
Hi, i dont know about registry, but if you buy new hardware jeyboard, youll need plastic keyboard that youre tiping on. I have changed inner keynoard but not the plastic im tiping and i have got wrong all. Mine was qwertz but now is qwerty. Greetings from Serbia!!
Hi, I have changed the keyboard of my wiza (just the plastic keys) from Qwerty to Qwertz, if you want to have QWERTY on your new Wiza, just disarms your old phone and take the Keyboard to the new one, it most work right with an English rom =)
Good Luck!!
nerolubo85 said:
Hello,
after 5 years my Wizard is died so I diceded to buy a new one!
I found a very cheap QWERTZ but I need a QWERTY keyboard (as mine is) so, if I buy it, I have to change the registry keys... But what will happen after that? If I'll type "Z" on the keyboard it will write "Y" on the screen?
If yes, do you think I can swap the two hardware keyboards to allign software and hardware?
Thanks
Click to expand...
Click to collapse
this, you try to use AE Button to button on the device mapper....
for more details go to ---> http://ae.inc.ru/aebplus.php
Thanks to all! I will try soon