Related
Dear all,
Sorry for bad english,
I bought used XDA II, which is one month old.
And I am new to this gadget.
Today everytime I change today setting, my xda is hang.
I have change it before with no problem.
Any body can help me? thanks.
Sorry,
While waiting the answer, I try looking to the program menu, there is Dictonary and mobimate worldpro, I try to run both program with the mesage Not Valid poket PC application, I dont know what happen.
On the "remove program" both program also appears,
I have remove both of it, (with no reason), and the today setting is back to normal.
Thanks anyway, but what happen to both program that gone maybe my next question.
Hi Waduk,
What I would do in your situation is to perform a hard reset, this will put the device in factory defaults. Of course you will loose all custom applications installed by the original user, but at least you will have a clean device. However you will need to manually delete old stuff from the Storage folder.
If you don't know how to Hard Reset the XDA2, just press the power button, the Action button and the reset hole in the bottom at the same time.
Best regards,
Rayan
thanks.
I hate to sound argumentative . . . but you don't press the action button. To hard reset the XDA II/MDA II/Qtek 2020/i-mate you simply press and hold the On/Off switch and depress the reset switch with the stylus, then release the on/off switch. That's all there is to it!
My OK and WIN button launch nothing anymore.
I have a TyTN and the OK and WIN button on the front side and on the external keyboard are like inactive.
How can I restore their default behavior ? where is it located in the registry ?
chris247 said:
My OK and WIN button launch nothing anymore.
I have a TyTN and the OK and WIN button on the front side and on the external keyboard are like inactive.
How can I restore their default behavior ? where is it located in the registry ?
Click to expand...
Click to collapse
HAve you installed AEButtonPlus by any chance?
Yes, I install AEbutton. Is that the reason ?
I am going to uninstall it to try if I will have my OK and WIN button back.
I installed AEbutton for the copy/paste possibility that you can assign to a button (very useful), I will miss that, but I miss my 2 buttons even more.
I uninstalled AEButton, and made soft reset.
The OK and WIN buttons are still not working :-(
I have just installed ButtonMapper instead of AEButton, I now have the OK button working again !!
But the WIN button is still not working.
Anyone knows how I could get my WIN button working again ?
My OK button is fine, but my WIN button works intermittently. Sometimes it takes three or four presses to register and bring down the Start menu. In contrast, the WIN/OK combined button under the scroll wheel always works without fail. Annoying!
chris247 said:
I have just installed ButtonMapper instead of AEButton, I now have the OK button working again !!
But the WIN button is still not working.
Anyone knows how I could get my WIN button working again ?
Click to expand...
Click to collapse
TBH, I'd uninstall button mapper, then run something like SKTools to clear all errant shortcuts and and notification queue entries. Then see where you go from there. Failing that, I'd recommend a hard reset.
bydandie, good idea I will have a look at sktools.
Do you know how does button handling work under the hood ?
what process is launched when I press a button ?
Good question....
I'm thinking a way to change my hard button links without installing a 3rd party software.
Is it possible modifying Registry?
Any other idea?
chris247 said:
bydandie, good idea I will have a look at sktools.
Do you know how does button handling work under the hood ?
what process is launched when I press a button ?
Click to expand...
Click to collapse
No, but I do know that in the past when I tried AEButtonplus, I got the same issues as you, but with an uninstall it cured it. It may be worth reinstalling AEButtonplus and then ensure within the app the the Win and OK buttons have nothing assigned to them.
I'm not sure what it calls, ,the codes look different from what is used by things such as the Soft-Key mapper
JmJ17 said:
Good question....
I'm thinking a way to change my hard button links without installing a 3rd party software.
Is it possible modifying Registry?
Any other idea?
Click to expand...
Click to collapse
Normally the hard buttons can be found under HKLM/Software/Microsoft/Shell/Keys
There you will find a series of subkeys beginning with 40C
Each subkey correspond to a hard button. For instance on my ppc 40C1 is the calendar hard button. So try to find the subkeys related to Ok and Win buttons and change the default value by the path of the app you want to launch. By default, the hard buttons applications links can be found under
/Windows/AppButtons
Cheers,
.Fred
ps.: I don't have an OK and WIN buttons on my ppc, so maybe its different for these two...
Thanks for the information dotFred, I have had a look on the registry and in the windows folder.
You are right the linking between the application and the hard button is made here, but only for the configurable buttons that you can configure in WM5 settings/button. Unfortunately the TyTN's OK and WIN button on the front and on the side of the PocketPC are not included :-(
I'd also like a way to configure the function of the start button, and the side OK/start button. I have installed Smallmenu and would like those buttons to open it instead of opening the standard start menu.
Any ideas?
I noticed on my 8525 that when i put some programs onto my memory card it deactivated these two buttons as well. You might try uninstalling some recent programs. (the program that caused problems with me was an expired trial version of WA2 that i moved onto my card.)
HTC TOUCH HDThe device stuck in animated gif. Try to do hardreset, first become bootloaderscreen and then a message "No image file"
Please Help
What a hell of a job with these small buttons!
Thanks in advance!
this way
On a powered off phone hold down the volume down and the volume up button and power on at the same time. After a couble of secunds you will get a warning... You can now let go of the buttoms. if you want to proceed with the hard-reset you press wolume up buttom otherwise you press something else..
Rememeger you will delete all you data by hard-resseting your phone
luckyuser said:
HTC TOUCH HDThe device stuck in animated gif. Try to do hardreset, first become bootloaderscreen and then a message "No image file"
Please Help
What a hell of a job with these small buttons!
Thanks in advance!
Click to expand...
Click to collapse
I had some issues as well the first time I wanted to hard-reset my HD. But after several times, I got it. I laid down my HD, pressed the upper and lower volume button at the same time with my right hand, and pressed the power button at the same time with my left hand, and it will come.
Just try several times, and you'll get the same. But try to backup some part before if it's possible!
The one you've done (I guess) is the bootloader, which will appear when you press the volume down and power button at the same time.
GreenFrog
I have a Dutch device, so I don't know exactly how it's called in the English rom. But this is what I did:
Goto 'Settings' => 'System' and then something called 'Opslag wissen' in the Dutch rom. In english it would be something like 'Delete data'.
When you do that you are asked to enter "1234" and press the YES button. After that, the default settings are restored and all data is deleted.
Now this is my issue: I had installed several programs on the memory card and they are stil there, which is good. They even work after the reset, which is also good. But I can't put them in the programs menu or programs tab anymore, which is not good.
Does anyone know how to solve this? Or do I have to get rid of all the programs and reinstall them again?
Grtz,
Thijs
Re-install the applications..
Hey.. I think the easyest is to re-install the applications... Just because you choose to install them om the memorycard, the software stills place som files in windows system files...
backup
just to be sure i always have a map on external storage with all the cab files i installed. in case of hard reset ik can always reinstall everything whereever i am.
thijs84 said:
I have a Dutch device, so I don't know exactly how it's called in the English rom. But this is what I did:
Goto 'Settings' => 'System' and then something called 'Opslag wissen' in the Dutch rom. In english it would be something like 'Delete data'.
When you do that you are asked to enter "1234" and press the YES button. After that, the default settings are restored and all data is deleted.
Now this is my issue: I had installed several programs on the memory card and they are stil there, which is good. They even work after the reset, which is also good. But I can't put them in the programs menu or programs tab anymore, which is not good.
Does anyone know how to solve this? Or do I have to get rid of all the programs and reinstall them again?
Grtz,
Thijs
Click to expand...
Click to collapse
you can re-create shortcuts in Programs folder with Resco Explorer just by tapping and holding down and then selecting "create shortcut". hope it helps
GreenFrog said:
I had some issues as well the first time I wanted to hard-reset my HD. But after several times, I got it. I laid down my HD, pressed the upper and lower volume button at the same time with my right hand, and pressed the power button at the same time with my left hand, and it will come.
Just try several times, and you'll get the same. But try to backup some part before if it's possible!
The one you've done (I guess) is the bootloader, which will appear when you press the volume down and power button at the same time.
GreenFrog
Click to expand...
Click to collapse
@GreenFrog Thanks for the quick reply!
Now i know what I was doing wrong, I pressed the upper and lower volume button at the same time pressing the power button, but I'm instantly hold the powerbutton down, instead of pressing it one's!
But the mean problem for all this misery was a corrupted SD-Card (There were no more Apps installed, something had blow them away,the directory Programfiles was complet empty), the device couldn't start up Windows Mobile. When I remove the SD-card everything works fine again, except that i have to re-install all apps.This looks very strang to me, never had such an issue before!
the trick is to hold both the volume keys down and to press the power button just once. It will not work if you hold down the power button while the device is turning on.
Hope this helps
This also stumped me for a while.
The difference between going to the bootloader and doing a hard reset is that to do hard reset, you press BOTH the up and down side of the volume key whereas to go to bootloader, you press only the lower side of the volume key. In both cases, you press the power button.
Remember to do this after shutting down the device.
The approach of going into setting and do a clear storage is fine as long as the device is not frozen up yet.
Hope this makes it clearer for everyone.
skreis said:
you can re-create shortcuts in Programs folder with Resco Explorer just by tapping and holding down and then selecting "create shortcut". hope it helps
Click to expand...
Click to collapse
You beat me to it, but yes, listen to the man, as he knows what he's talking bout
HI All,
I've installed NAVIGON 7 on my HD but it crashes so I've uninstalled the program but now the TOUCHFLO doesn't start anymore automaitcally.
I0ve try with a reset pusching the red button inside the hone but nothings happen
Can someone help me to restart the touchflo interface?
Many Thanks
Edika
Try Settings>Today>TouchFLO and untick it then press ok and go back in and tick the box again. See is that helps thats what I did with mine when TouchFLO didn't load.
edika said:
HI All,
I've installed NAVIGON 7 on my HD but it crashes so I've uninstalled the program but now the TOUCHFLO doesn't start anymore automaitcally.
I0ve try with a reset pusching the red button inside the hone but nothings happen
Can someone help me to restart the touchflo interface?
Many Thanks
Edika
Click to expand...
Click to collapse
First what you can try is remove battery ja sim and then put them back.
If nothing else helps final help is hardreset. NOW, REMEMBER TO TAKE BACKUP FROM YOUR CONTACTS ETC..
To perform a hard reset
Warning! Your device will be set back to factory default settings. Make sure that any additional installed
programs and/or user data have been backed up before you perform a hard reset.
1. Pull out the stylus
2. With the device turned off, press and hold the VOLUME UP and VOLUME DOWN buttons, then briefly
press the POWER button.
3. Continue pressing the VOLUME UP and VOLUME DOWN buttons until you see this message on the
screen:
This operation will delete all your personal data, and reset all your settings to the manufacturer default settings. Press VolUp to restore manufaturer defaults, or press other keys to cancel.
4. Release the VOLUME UP and VOLUME DOWN buttons.
5. Press the VOLUME UP button to perform the hard reset, or press any other button to cancel the reset.
or with phone on:
To clear storage
You can also use Clear Storage to reset your device back to factory default settings.
1. On the Home screen, slide to the Settings tab and then tap All Settings.
2. On the System tab, tap Clear Storage.
3. Enter “1234” and then tap Yes.
Hope this solves your problem.
First I would like to state that none of the graphics in this cab file are my work. I don't know who made them but it wasn't me. Also, I am not the developer of psShutXP.
What I did was fix psShutXP so that it replaces the Long-Press Power Key. Instead of having a lame, white "Do you want to shut down" window that pops up when you hold the power button, you will have a nicely skinned psShutXP window that gives you the options to turn off the display, power off the device, reboot the device, hard reset the device, and even gives you the options to set reboot schedules.
Note that ALL functions are working in this cab that I put together including Shut Down.
Screenshot:
is the application running in the background or is it triggered upon long press of the end key?
Giannis86 said:
is the application running in the background or is it triggered upon long press of the end key?
Click to expand...
Click to collapse
It's triggered when you hold the power key for about 3 seconds. It does not run in the background and is not set to the end key.
i meant the power button my bad
installing right now
dharvey4651 said:
First I would like to state that none of the graphics in this cab file are my work. I don't know who made them but it wasn't me. Also, I am not the developer of psShutXP.
What I did was fix psShutXP so that it replaces the Long-Press Power Key. Instead of having a lame, white "Do you want to shut down" window that pops up when you hold the power button, you will have a nicely skinned psShutXP window that gives you the options to turn off the display, power off the device, reboot the device, hard reset the device, and even gives you the options to set reboot schedules.
Note that ALL functions are working in this cab that I put together including Shut Down.
Screenshot:
Click to expand...
Click to collapse
If you guys overwrite PowerOffWarning.exe, you'll no longer can turn your phone off completely (Exp when you wanna turn device off at night )
dharvey4651 works nice.
Thanx
Nice app. man , thanks!
I want to know, I always see apps that schedule reboots for the diamond, why is it so hard to schedule a simple shutdown? Or isn't it so simple? I mean, ok with the reboot but who needs it anyway? I don't....but I realy need the power off, isn't there something that can be done?
i tried uninstalling the application but it doesnt revert to the original..how can this be solved?
Cloudyfa said:
If you guys overwrite PowerOffWarning.exe, you'll no longer can turn your phone off completely (Exp when you wanna turn device off at night )
Click to expand...
Click to collapse
this does not break the power off function. try it you wont be disappointed.
Giannis86 said:
i tried uninstalling the application but it doesnt revert to the original..how can this be solved?
Click to expand...
Click to collapse
soft reset and it should revert back to normal.
Adv Config
Adv config allows you to map the long press power button to whatever you want. I just used that to do exactly this and a few other indispensable tweaks.
uniqueboy said:
Adv config allows you to map the long press power button to whatever you want. I just used that to do exactly this and a few other indispensable tweaks.
Click to expand...
Click to collapse
Can u please share where one would do this tweak in Advan. Config. 3.3? I will continue looking.
Harvey, you're quite the h4x0r!
I've been following your work in the XBmod Manila HD thread and have been hoping for a working version of this program for a long time!
Quick question, does clicking the gear in the top right allow for a hard reset using the clear storage method? (or does it open the clear storage settings menu?)
This hard reset option really messed things up on the old version of this software, to the point where I needed to flash a new rom.
FYI, I'm using a CDMA Telus diamond in Canada, eh.
I can confirm that soft reset, shut down, and screen off all work on a CDMA diamond, 20764 sys (from the leaked new sprint rom). The scheduling function also works great. I still wasn't brave enough to try the hard reset function though.
thanx for tweaking this app, it has now saved me a space in my start menu.
dharvey- thanks.
does anyone know where the setting is for the amount of time we need to hold the power key down before the psshutxp opens? i'd like to make mine come up faster.
uniqueboy said:
Adv config allows you to map the long press power button to whatever you want. I just used that to do exactly this and a few other indispensable tweaks.
Click to expand...
Click to collapse
Good idea (i prefer the end key long press for this) but for an inexplicable reason it's not working on my Diamond and Advanced Config 3.3. It seems to take the setting but when i press the end key it "choose" the action which is defined by Start - Settings - End key Long Press.
arasarn said:
Harvey, you're quite the h4x0r!
I've been following your work in the XBmod Manila HD thread and have been hoping for a working version of this program for a long time!
Quick question, does clicking the gear in the top right allow for a hard reset using the clear storage method? (or does it open the clear storage settings menu?)
This hard reset option really messed things up on the old version of this software, to the point where I needed to flash a new rom.
FYI, I'm using a CDMA Telus diamond in Canada, eh.
I can confirm that soft reset, shut down, and screen off all work on a CDMA diamond, 20764 sys (from the leaked new sprint rom). The scheduling function also works great. I still wasn't brave enough to try the hard reset function though.
Click to expand...
Click to collapse
Not sure if the hard reset function works or not. I too am too chicken to try it.
ajm144k said:
dharvey- thanks.
does anyone know where the setting is for the amount of time we need to hold the power key down before the psshutxp opens? i'd like to make mine come up faster.
Click to expand...
Click to collapse
Your welcome. I don't know if there is a setting to change that. It's the standard long-press-power-key function with a nicer, more functional interface.
dharvey4651 said:
this does not break the power off function. try it you wont be disappointed.
Click to expand...
Click to collapse
It does PsShutXP has 3 functions:
- Display Off : Turn off your screen backlight (keep programs running)
- Power Off : The same when you press your Power button (differrent from when you do long-press Power button and chose YES)
- Soft Reset : Reset the device
About hard reset: don't worry, it just does a soft reset!
Simple Example: When you wanna change your SIM, usually you turn your device off completely, then remove battery, change the SIM. Now, you can't turn it off completely.
Btw, this is a good soft, but i don't think replace the PowerOfWarning.exe is a good choice!
If you guys don't care about the true "Power Off", forget my post and enjoy
i uninstalled it and soft reset however its still worki
ng.the only difference is that it does not appear in the uninstall list..
i love its looks but i somewhat disliked some behavior at the moment..
i found that after running it once it and after clickin on cancel it will run in the background (not such an issue as you are more likely to reset than power off the screen )
the problem in my case was that it somehow crashed this one time and a long press on the power button would not trigger it anymore..so i had to remove the battery to reboot.. it does work now again but i dont know what caused it..
wow.. thanks this is great stuff
however, anyway of making it into an actual APP, like the original psshutxp which is only triggered if u run the prog?
i dont really want it to be mapped to my power button...