I'v installed on my Tytn the AKU 3.31
(http://forum.xda-developers.com/showthread.php?t=298520)
I'v set up the Internet Sharing via bluethoot with my notebook ( xp prof sp2)
and works fine.
I connect in VPN with my "small business server 2003"
i can go on internet in VPN but :
a)my Outlook can not connect to the server
b) I can not view any resource from my LAN
i found this article : http://www.pocketpcmag.com/blogs/in..._networking_model_of_the&more=1&c=1&tb=1&pb=1
and a post and the end of the page have the same problem
Can someone help me ?
Related
Hallo,
I've searched for a long time in the forum and in Internet but I was not able to find how to access a shared folder on my :shock: LAN. It seems I have to use pass-through connections but I'm not able to make it work. Every time I use pocket file explorer to open a shared folder (writing the complete UNC) I receive the message "the network path was not found" and then "network resource cannot be found .....".
My LAN is a 192.168.1.X network and I've seen that IP assigned to the PPC is 192.168.55.101
Thank for every help.
Rudy
I'm not sure.
But have you tried localhost????
HTH
Stefan
I've tried from pocket file explorer both \\localhost and \\127.0.0.1 but I've received always the same messages.
rudy
Tryed Pocket LAN yet?
It works
I have been trying to do this for months and pocket Lan works perfectly
There is a freeware network utility, named vxUtil.
Maybe this tool help you to solve the problem.
Utilities include:
DNS Audit
DNS Lookup
Finger
Get HTML
Info
IP Subnet Calculator
Password Generator
Ping
Ping Sweep
Port Scanner
Quote
Time Service
Trace Route
Wake On LAN
Whois
vxUtil (Personal) operates on all Windows CE-based Handheld, Handheld Pro, Palm-size and Pocket PCs and requires Windows CE 2.0 (or later).
http://www.cam.com/vxutil_pers.html
I've truid both pocket lan and vxUtil with no results. I can't ping the laptop. I think I could never ping it if the network segment of PPC and laptop are different. Laptop ip now is 10.0.0.8 and PPC always 192.168.55.101. Perhaps I should enabled a proxy on the PPC to route the ping.
rudy
do you have a personal firewall installed on laptop? try to disable and check
I have no firewall installed or active.
I was successfull in accessing the LAN using the software "pocket LAN CE", but this is obvious thus it installs a server software that stays resident in the tray bar of the deskop PC.
There must be a solution to access the LAN using only active sync!
As far as I know that's not possible without a LAN card.
The passthrough which is available via activesync works only for internet connections.
I might be wrong. Keep looking. Have done it for a long time an gave it up.
If you find a solution feel free to share at this forum.
Success
How about LAN over Bluetooth?
LAN over bluetooth
And how do we accomplish this with the XDA II while the XDA II has no profile for LAN over bluetooth.
Please share the info you've.
Because this is interesting to me too!
For me too I'm also trying bluetooth over XDA but aint working yet
:?
I have installed bluetoothGPS.zip file (found in this forum) and then I installed the Bluesoleil Bluetooth Software for the PC (evaluation version). I could get an IP for the PPC and see the LAN but Internet wasn't working. Anyway having the two Bluetooth Stacks at the same time on the PPC is not a good alternative...
So please:
-MS give us some more Bluetooth Profiles, cm on, you can doit!
- Tobias and Pocket Bluetooth Tools: Please finish the LAN profile, I already donated you :wink:
Cheers
Make sure that a "guest" account is enable on your server, and try protocals other than tcp/ip. Ipx/Spx is fair. I suppose I should ask first if the activesinc laptop is able to browse the target folder? If it can, then try mapping the share as a network drive on the laptop, and see if you can nav to it using activesinc??? I'm a newbie, and don't even have my MDA I yet (in about 2 hours, I will). I will definantly be trying lots of unorthodox crap, so I'll let you know if I get it to work! Good luck.
Hi all,..
Maybe someone of you can help me with the following problem concerning VPN over GPRS.
I'm using the WM5 build in VPN client often, and seems to be working fine for the terminal application (Remote desktop).
Now I want to access shares and folders on the VPN server with my WM5 client (same server as the remote desktop server). When I set up a VPN connection with my universal to the Windows 2003 server, I cannot access shares and folders. When I try to connect to the remote desktop it goes fine.
On my laptop I can access the shares, but only on my Universal I cannot.
I think it must be something with a default gateway. There is an option on my XP laptop, which say's "use default gateway on remote network". But this option is not avalable on my universal. Is this the problem? how come I can access the remote desktop and not any shares?
(PS: When I connect internal through WiFi It works fine, only over GPRS-VPN is doesn't work)
Best regards,..
Arjan
no one?
I have not been able to get VPN to work over GPRS. How do you configure connections?
Qtek 9000
ROM:1.30.77 WWE
Radio 1.09.00
I'v installed on my Tytn the AKU 3.31
(http://forum.xda-developers.com/showthread.php?t=298520)
I'v set up the Internet Sharing via bluethoot with my notebook ( xp prof sp2)
and works fine.
I connect in VPN with my "small business server 2003"
i can go on internet in VPN but :
a)my Outlook can not connect to the server
b) I can not view any resource from my LAN
i found this article : http://www.pocketpcmag.com/blogs/ind...&c=1&tb=1&pb=1
and a post and the end of the page have the same problem
Can someone help me ?
thank you
francesco
Hi,
I'm currently on a HTC Trinity using Mary's 3.3.5 ROM and want to be able to connect to my universities WiFi network but to do so I need to use a VPN tunnel, anyone recommend a good PPC App that will allow me to connect to my universities VPN?
Cheers,
Mike
mikecsmith said:
Hi,
I'm currently on a HTC Trinity using Mary's 3.3.5 ROM and want to be able to connect to my universities WiFi network but to do so I need to use a VPN tunnel, anyone recommend a good PPC App that will allow me to connect to my universities VPN?
Cheers,
Mike
Click to expand...
Click to collapse
WM6 Pro includes both a PPTP & a L2TP/IPSec VPN client. This will work with most VPN routers & firewalls, however they may not be configured to support it. If you can connect using Windows 2000/XP's built-in PPTP or L2TP/IPSec VPN Client then you can almost certainly connect with WM6's.
A lot if VPN Routers & Firewalls are supplied with a 'free' Windows client that has the documentation geared around it. However most (if not all?) of these products will work with the native VPN client in Windows 2000+ (and WM5/6). I would try and stick with the L2TP/IPSec client but this requires some additional steps over setting up PPTP - on both the client & server (router). It is worth the extra steps in my opinion though.
Andy
I have the same problem ... I am not able to connect using the default VPN client ...
Hi,
There's a great review of vpn clients by Menneisyys in the Wiki. It's entitled:
'Access Your Desktop PC From Your Pocket PC!'
I'm sure you'll find it very useful because it would point you in the right direction as regards VPN tunnelling to your Uni's server.
kiwi992.
kiwi992 said:
Hi,
There's a great review of vpn clients by Menneisyys in the Wiki. It's entitled:
'Access Your Desktop PC From Your Pocket PC!'
I'm sure you'll find it very useful because it would point you in the right direction as regards VPN tunnelling to your Uni's server.
kiwi992.
Click to expand...
Click to collapse
HI!
Thank you for your reply, but this articles are about "Remote desktop" - like solutions for WM - based devises. Not for connecting to VPN.
Did anybody have had any success so far?
Any working 3-rd party VPN clients / Solutions?
Thank you in advance.
Dmitry.
====
keyword list: VPN; connection; VNP over WIFI; VPN WM5; VPN WM6; VPN problem; VPN client;
Hi,
You might find Manneisyys' review very long but if you take your time to read it, you'll see that he talks about the various VPN clients and how they compare. VNC, VNC+, etc are all mentioned there.
Just take your time to read it.
kiwi992.
Nice article, is the VPN working?
Do you have the WM6 VPN client working? Specifically the ActiveSync -> VPN -> MS Exchange functionality that was there under WM5?
kiwi992 said:
Hi,
You might find Manneisyys' review very long but if you take your time to read it, you'll see that he talks about the various VPN clients and how they compare. VNC, VNC+, etc are all mentioned there.
Just take your time to read it.
kiwi992.
Click to expand...
Click to collapse
Thank you for your answer!
But. Once again: the article talks about REMOTE CONTROL with the use of things like: RAdmin, MS RDP, etc.
This sofware - are remote desktops, so called VNC, not VPN clients in a classic way.
There is a little mess we get at the moment. (I've defenetelly got)
Let me describe in detail:
People need VPN here for many reasons, for me it is:
- to connect to some VPN through WIFI with our WM5 \ 6 device.
In my case- this is a public WIFI internet provider, which has a wifi coverage in the city.
Wifi is open PPTP. I need to type in a login \ pass on the web page I get, to start using the internet in current wifi session.
The ALTERNATIVE way to conect to internet - is to establish a VPN connection over the wifi.
I can successfully do in on the laptop.
With my UNI, WM5, AKU 3.5 - I can connect to VPN with the built-in VPN Client, but the first request to internet (via browser or Messaging send-receive) - drops my VPN connection, as it described here in the forum.
So: we need some software that can work.
I tried so far:
1. BlueFire VPN - just can't connect.
2. Antha VPN - just doesn't work.
I have heard thah on some other ROMs there is no problem with the built-in VPN client for PPTP, will try with some other WM6 ROMs later.
Any solution so far?
Thank you, kiwi992
Thanks to everybody!
Hi, im sorry for my bad english.
I have the same Problem. I search for an VPN tool. I have wm6. I know ther ist an VPN client but it doesn't work. To connect to the VPN in my University I need the L2TP/IPSec "safety andcertificate" but I don't kwon where I can load this.
thank's for helping
IronMaster1987 said:
Hi, im sorry for my bad english.
I have the same Problem. I search for an VPN tool. I have wm6. I know ther ist an VPN client but it doesn't work. To connect to the VPN in my University I need the L2TP/IPSec "safety andcertificate" but I don't kwon where I can load this.
thank's for helping
Click to expand...
Click to collapse
Hi! The L2TP/IPSec is a special story.
It is widely discussed here at forum: xda-developers > General discussion > Networking >
Search for *VPN* string on this forum.
This is the: http://forum.xda-developers.com/showthread.php?t=302520&page=2&highlight=*VPN* one of the success stories.
You need to obtain the certificate from the system administrators of your network. You may also have some "magic" URL in your campus network, where you can download the required certificate. This URL should point to the inranet web page of the web interface of the VPN server.
If your goal is to securely connect to some specific computer on the network, you should use one of the VNC programs: the VNC server part on the computer, and the VNC client on your device.
In any case - first check your certificate \ settings on, say, Windows XP laptop, connected through WIFI, first, then continue with the device.
Good luck!
Dmitry
VPN problems
I don't know if this issue is specific to my device (pharos gps 600 gps phone), or to windows mobile 6 which I'm running.
I can't connect to my vpn through wifi, the reason being is that I cannot associate any connections through the wifi card with the vpn info.
Wifi card doesn't show as a selectable modem in the modem tab next to the vpn tab in the vpn config. Only modems are cellular line modems, bluetooth, and one "hayes compatible com1" which is my usb I would guess.
Does anybody know how I might get around this?
Hello,
first of all, this is my current working setup:
- PC with Windows Server Essentials 2012 with shared folders (AD + domain) connected to ADSL router TPLINK W8970B (with active dynDNS account)
- Sony Z3 Compact (Android 5.1.1.), non-rooted
- ES FileExplorer and Solid Explorer
Now to my problem: I can connect to my PC shared folders (via ES and SE with exact local lan IP of PC) only when I`m using wifi on Z3, but for connecting to PC via 3G I`m trying using exact dynDNS address and enabled SMB ports in router forwarding to PC (445 and 139 TCP/UDP) with no success. Firewall in PC has those ports enabled, I can ping dynDNS address from 3G network too. What am I missing ? Or is it not possible at all ?
Seems it wont work according dynDNS : dyncommunity.com/questions/35068/dyndns-and-smb.html
Wheras SSH and HTTPS are normal internet capable protocols, SMB server access protocols are MS proprietary and not designed to work over the public internet as such, but designed for use within LANs. For example, Windows server expects to see an internal (AD) network name which you cannot provide when using a Dyn DDNS hostname.
Click to expand...
Click to collapse
But, I tried using direct IP address from dynDNS and it works then. At least some workaround...