Hola, I have installed this parrot to me, have a trinity, and it does not do mas that to give me problems. With the wm sometimes the music is listened skippingly. I have to use another breeding player. And since(as,like) it happens to me to open the tomtom I have to forget the music since itgoes skippingly constant. Has someone some experience or suggestion to on this?
Thank you
I´ve installed it in a BMW 5er and I've had th same skip problem.
Try to upgrade the firmware from the parrot web site by bluetooth. It seems to resolve the problem.
anybody has the solution?
Related
Hi all... I have read a lot of posts on the forum, but I havent found a solution.
I have a HTC TyTN with the original and italian ROM. I have bought a iTech S35 because I have read in this forum that It has a sufficient compatibility with a2dp and TyTN.
But... If I listen Resco Radio throught wi fi, I have often the skipping issue.
Is there a way to resolve this issue? Or with Wifi actived there isnt a solution?
Thanks
Stefano
yep, that's a known issue. WiFi & bluetooth don't get along together in your ROM. I'll be testing this combination on the new HTC ROM later today to see if its been addressed.
edit:
Checked. Problem still exists in the 1.35 ROM.
I've just got a Orange SPV M3100 and paired it with my BMW OEM bluetooth carkit, all goes fine and paired no problems.
It manages to connect to the phone and display contact details on the radio display and make calls.
But leaving it a couple of hours and coming back, the phone will not reconnect back to the car. I've tried resetting the phone without success.
The only way to get the connection back is to re-pair the devices.
I had a Imate Jamin before and it worked without a problem, connects every time.
Is anyone else experiencing problems with their carkits?
Do you think the problem is specific to the Orange ROM, would flashing it to a Imate or TyTN ROM help or resolve the problem?
Any advice would be greatly appricated.
Hi, I got a problem similar like yours...
I´m from Spain and I have an ´06 Opel Astra(Vauxhall in UK) with the BT handsfree carkit from factory.
If I make a hard reset to my Vodafone S200 (Orange SPV M600) and leave the machine with the factory settings it works fine with the carkit, but it recognice the carkit like a headset handsfree. But if i restore a back up with the TomTom 6 installed... wow, then start the problems... the handsfree conect with the S200 but after a few seconds the connection is over...
I don´t know if have you got some kind of navigation system, but in my case the problems starts when I install the TomTom... I´m sure it changes some drivers of the BT and this makes the don´t works propertly.
I don´t know what to do...
PArrot Car Kit
I have the same problem with Parrot Car Kit and I have the latest TYTYN ROM
2006 BMW 3-Series Bluetooth
My car doesn't have bluetooth, but I had a loaner car while my car was under the knife. The loaner car was a 2006 3-series w/ Bluetooth. The first pair was perfect, but after a few hours.. What a POS.
I have the latest ROM on my phone, and that didn't make a difference.
No issues on my 5 series, but I have one of the first ULF modules in mine.
From reading TyTN Bluetooth issues around the net and on this forum, it seems to be an issue with the TyTN having some kind of power save mode which turns the bluetooth off after some time.
Kinda stupid, anyone know some registry crack to turn any power saving off?
I have a Parrot CK3100 in a BMW and a brand new SPV M3100. All was working well with my M600 but as soon as I swapped the phone for the M3100 last week I've had problems as described by the OP. Bluetooth keeps switching itself off on the SPV. It works well enough to start with and then suddenly it disconnects. Re-pairing works and it's worth going to bluetooth settings and turning it back on again before you try re-pairing.
Surely there must be an easy fix for this problem - I'm just really pleased I'm not the only one with this fault.
............
Your all quite lucky it works at all..mine doesn't do anything
My Ford Fiesta has been waiting for an 'software upgrade' since October !!
Promised it would be available before Xmas but nothing happened.
lifterus said:
Try and replicate the problem with a different phone if possible. One that BMW supports. If can replicate it, then they'll update the firmware on the BT unit in the car. This happened to me. But I had to prove my case using my girlfriend's RAZR before they'd listen and stop blaming my phone as the cause.
Click to expand...
Click to collapse
I dont think it is a problem with the BMW carkit as it worked fine with my SPV M600 (Prophet)
I got my S200 back from a repair and it was also upgraded form G3 to G4.
Everything seems to work fine, except my Jabra BT500 head set. After pairing with my S200 I got a very cracking sound.
So I checked my Jabra with another mobile phone and it worked very well. I checked another head set with my S200 and again a cracking sound.
Does anybody knows how to solve this or do I have to return my S200 again for repair?
Hi, I have excatly the same problem, it also occurs with the bluetoothof my car...anyone can help us?
I have returned my S200 to QTEK today in order to have it repaired (again).
I have tested it (in my car) with 2 other Bluetooth headsets and there was no problem. There was also no problem when I tested my own headset on another phone. So this proves that my S200 has some kind of defect.
The sound is very crappy ?
Or is the soud quite ok, but experiencing high frequency glitches, kind of metallic parasits?
Because in that case, there is nothing to do, It's due to the MS bleutooth stack which has a very poor encoding librairy... and since there is no widcomm stack for S200 (and some other qtek too, a lot of people is yet trying to malke it work), then evey bleutooth headset will have bad sound in A2DP with the S200 :'(
One of the main reasons why I want to change for a widcomm stacked pocketPC (shame on MS!!!!!!!!!!)
For me, the quality is very bad. At the beginig I use it only on my car and it was working perfectly, since I try to connect to the bluetooth headset or to my computer the sounds became very very crappy. I have Dopo ROM, which rom do you have? what ROM do you advise? Thank you
I have tried the LVSW, Jester and shipped ROMS and all these ROMS have the same problem. So I think that it is not related to the ROM but due to bad hardware components.
it's strange because it was working for me before I use other bluetooth device. I will try to upgrade the rom to the official QTEK ROM
I have the same problem. As if the bluetooth signal were cut per moment.
it's not linked to roms, but to bluetooth stack, so since the bt stack is updated (but I doubt it), changing roms won't help
I could fix it, I update the ROM, delete all pairaing on my cars... I change the "hsotname" of my QTEK on "settings - Owner information" I recreate the pair and it works fine on my car, now crappy sound anymore. Just to test it again, I try to pair my "fujitsu laptop" to my qtek, since I did it, the sound is again very crappy. So I will flash again and pair it only with my car. If I return it to Qtek it takes 1 months... If someone can fix this that would be great.
I'm hoping someone is having the same experiences or can help recommend a solution.
I have trinity (Obviosuly) with the latest WM6 rom from the Manufacturer, with Radio 1.50.
I use a TomTom One v2 (with bluetooth), and a Parrot 3200ls.
The TomTom has the latest firmware, as does the Parrot.
When trying to get traffic updates to the tomtom thorugh my trinity, the connction works the first time, but switch off both the tomtom and the trinity, the connection never works again and has to be re-setup.
The Parrot will connect to the phone, but sometimes will not connect at all until i reset the trinity, when it does connect sometimes the sound and mic wont be routed to the car kit and you have top physically pick up the phone , not a good idea in communist Great Britain when your driving!
Ive tried different ROMS, I even tried downgrading my radio to 1.45 with no success.
The trinity is a great device but not being able to use the bluetooth car kit safely, and the tomtom plus services, is seriously making me consider going back to my SE k610, which I really dont want to do but I know works flawlessly.
Thanks in advance.
Craig f said:
I'm hoping someone is having the same experiences or can help recommend a solution.
I have trinity (Obviosuly) with the latest WM6 rom from the Manufacturer, with Radio 1.50.
I use a TomTom One v2 (with bluetooth), and a Parrot 3200ls.
The TomTom has the latest firmware, as does the Parrot.
When trying to get traffic updates to the tomtom thorugh my trinity, the connction works the first time, but switch off both the tomtom and the trinity, the connection never works again and has to be re-setup.
The Parrot will connect to the phone, but sometimes will not connect at all until i reset the trinity, when it does connect sometimes the sound and mic wont be routed to the car kit and you have top physically pick up the phone , not a good idea in communist Great Britain when your driving!
Ive tried different ROMS, I even tried downgrading my radio to 1.45 with no success.
The trinity is a great device but not being able to use the bluetooth car kit safely, and the tomtom plus services, is seriously making me consider going back to my SE k610, which I really dont want to do but I know works flawlessly.
Thanks in advance.
Click to expand...
Click to collapse
Hi there,
I havebeen struggling with issues on my P3600i (trinity) and Parrot 3200 LS. It seems parrot have issues with WM6. The problems I was facing was reset of parrot during call, random divert of calls through handset, I answr sometimes and have to turn off handsfree on the call menu on my phone so I can hear the caller through my handset.
Today I downloaded the latest software for the parrot and uploaded it to the car kit via bluetooth on my laptop. There is a new feature in the paired devices list of "Forced Connection". I used that and low and behold my issues apparently have stopped. I noticed that my phone book isnt synchronising but the fact that I can actually use the car kit is fantastic!!!! I have been dealing with these issues for over 7 months!
Update to the latest version and see if this fixes it.!.!.!
Hello Everyone,
I´m checking this Forum since a couple of days and must say, that it is quite interesting here
Maybee there is anybody who can help me with my problem.
I´m using a handsfree kit from Parrot in my car, the CK 3000 evolution and have since a couple of days a HTC Touch2 with ROM 1.33.111.2.
Paring the device on the CK 3000 is no problem. To hear someone is also no problem, but nobody can here me. I called my parrot dealer and he decided to update the software of the parrot. After he did, I still have the same problem.
Is there anybode here, who has maybee the same problem than me and maybee a solution for it?? The actual software of the parrot was checked with ROM 1.28.406.4, as mentioned at the parrot homepage.
Hope to receive replies, Im realy confused....
Just to let you know, with my old nokia the ck 3000 evo. is working fine. So, there is nothing damaged on the parrot