Related
Whenever I connect my MDA Vario to my PC (Dell 700m) I get the blue screen of death which says there is a driver issue. Dont know what to do at all. How to delete drivers? Which drivers to delete?
I'm sure someone must have had this problem, but a search turned up nothing.
Please help =)
If u r using kaspersky antivirus you'll have to get rid of it. It was my problem. When I started using another antivirus, problem has gone.
Greetings.
Thanks for the suggestion, I tried shutting down Kaspersky but I still got the error. I can try an uninstall.
Microsoft's Crash Analysis gives me the following:
Error report summary
Error type: Windows stop error (A message appears on a blue screen with error code information)
Solution available? : No (see Next steps)
What does this error mean?: Windows has encountered an error from which it cannot recover and needs to restart
Cause: Unknown device driver
Computer symptoms: A message appears on a blue screen with error code information (for example: e.g. 0x0000001E, KMODE_EXCEPTION_NOT_HANDLED)
You have to remove kaspersky. Or sync via IR.
Wellcome
Hi, I am using Kaspersky Anti-Virus and have no problems! 8)
So there might be another incompatibility.
Do you use Active Sync 4.1 ??? The older version 4.0 came with my device and didn't work.
this is my experience, I am using ActiveSync 4.1+WinXP Pro+NOD32+Sygate Personal Firewall...
once I connected my mini s to the pc, Sygate like other firewall software asked me for permittion regarding the usb connection...I permitted for sure....
but the initialisation took more 15mins, and the screen freezed....I tried several times and it happened every time...
then I connected my old PPC (with PPC2003)to the pc, nothing goes wrong....
finally, I EXIT the firewall, quit it...not just "allow all traffic"...then the connection works smoothly......
the problem is I need to quit the firewall before I start ActiveSync...
Im using activesync 4.1, so that should be no problem.
Got it to work!!! Killing Kaspersky did the trick.
Thank you
with older versions of kav, u have to switch off lan scan.
for example, with kav 5.0.225 wks, no pb.
I was thinking of switching to Panda anyway
Thanks for everyones Help, very appreciated!
I updated the ROM and the wizard seems to be working much faster, and no more error messages.
mikeusc said:
Got it to work!!! Killing Kaspersky did the trick.
Thank you
Click to expand...
Click to collapse
Anytime
It's the Kaspersky Anti-Hacker that causes the problem, the Anti-Virus and Spam applications are fine.
I was using Kaspersky Personal Pro and I got that Blue Screen. Unninstalled it and everything work fine now.
Hi guys, I installed the Windows Live Package from http://www.live-messenger.nl/download/WindowsLive.PPC2005_ARM.CAB. It worked perfect, now i wanted to know how much memory this app costed, so i uninstalled it again. But when i tried to install it again, it failed When i open the cab, it loads approx. 5 seconds in the installer, then the installer says Installation of WindowsLive.PPC2005_ARM.CAB has failed Anybody suggestions how i can get this work??
p.s. Without a hard reset
I have also done the same thing and get the same error. I had to uninstall Windows Live Mobile because I was getting an error everytime I tried to launch Live Messenger. Now I can't re-install it again.
I have 2 main ideas:
1st.: Microsoft is cutting the service from these "un-official" releases of their software, as they are trying now to sell Windows Mobile 6 and Windows Live can't be downloaded or installed let's say "legally".
2nd. (which doesn't affect the first one): Microsoft recognizes the WLM software as not pre-installed or being installed on a Windows Mobile 5 device and tells the client to get "blocked", I mean, it writes some values to the registry and prevents being launched or installed again showing the empty error message I had before unistalling it.
Someone can verify any of my ideas or bring a solution to have WLM working again on our WM5 devices?
Thanks in advance.
Romero i've found the problem! I got my hands on an UNdated UNrestricted version. As you said mic. just cut the WLM off. I do not knowe why but here is the fix http://forum.xda-developers.com/attachment.php?attachmentid=36364&d=1175459584
fdez.romero said:
I have also done the same thing and get the same error. I had to uninstall Windows Live Mobile because I was getting an error everytime I tried to launch Live Messenger. Now I can't re-install it again.
I have 2 main ideas:
1st.: Microsoft is cutting the service from these "un-official" releases of their software, as they are trying now to sell Windows Mobile 6 and Windows Live can't be downloaded or installed let's say "legally".
2nd. (which doesn't affect the first one): Microsoft recognizes the WLM software as not pre-installed or being installed on a Windows Mobile 5 device and tells the client to get "blocked", I mean, it writes some values to the registry and prevents being launched or installed again showing the empty error message I had before unistalling it.
Someone can verify any of my ideas or bring a solution to have WLM working again on our WM5 devices?
Thanks in advance.
Click to expand...
Click to collapse
neither of those are correct, the reason is thats its a beta and expired at the beginning of the month. therefore you cant run the program or install it. just get a new beta version by signing up to Microsoft Connect or use the older version thats been extracted from wm6 thats floating around here.
Try it, like the worker:
WindowsLive.PocketPC_50_arm.cab
Thank you very much ASerg!
The version The Dutchman posted was in English, but I find out that the Aserg's file was several kB bigger... That made me think and decided to install this bigger one and finally got Windows Live Mobile working in Spanish, just like before my beta had expired.
So thank you again guys!
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
miriedl said:
Hi,
I have tried to upgrade my HTC 3300. I get as far as a white screen on my PDA, but after this i loose the connection with Windows Mobile Center and the machine automatically disconnects.
Then i get the error on my PC:
Error 260
Please help and e-mail to [email protected] if you have a sollution.
Kind regards
Michael
Click to expand...
Click to collapse
Update UPSL v0.1 by Pof
Link here :
http://forum.xda-developers.com/showthread.php?t=311403
And try again..!
Cheers...!
Hmmmm.
What do you mean with:
Update UPSL v0.1 by Pof
Michael
Pof is a user
UPSL is an unlocker utility so you can flash alternative ROM's
check the link - very informative.
reflashing your phone usually takes a weeks worth of reading if you care for your device.
And read it :
http://forum.xda-developers.com/showthread.php?t=312052
maybe it help you..!
Is there an easier way to explain this - Sorry i'm quite good working with my PC, but this was a bit greek:
All you need to do is:
1. Remove your SD card
2. Do a hard reset or clean storage (some programs like battery status block full access to your device)
3. Connect your mobile to PC and make sure that activsync connection is established
4. Start to flash your device with USPL, when DOS part end and your mobile switch to bootloader mode vista will find new device and start instaling new drivers.
5. Wait till vista finish installing new drivers and unplug your device, do a soft reset
6. Next step is to change vista drivers to xp, to do this you need to fallow this instruction:
http://www.mrvanx.org/cms/index.php?option=com_content&task=view&id=23&Itemi d=27
7. After switching the drivers plug your artemis again and install USPL, there should be no more problems with connection lost (errors 260, 270)
8. When USPL instalation will finish you can flash any rom you want to your arte
Succesfully tested on my T-Mobile MDA UK now I've got WM6 WWE.
Thanks pof for your great release
That explination is about as clear as it gets in 'phone talk'.
Perhaps elaborate a bit on what is exactly, or what step is, throwing you off.
Windows XP
Hi again.
Would i solve the problem if i just installed it from an Windows XP machine at work?
One final thing - Do you know if the GPS will still be working afterwards.
Have a good night from Oslo - Norway
Kind regards
Michael
I have recently installed Windows Vista on my computer and hooked up my also newly formatted PDA HTC TyTN with WM6 and as usual i cannot get them to work together, even speak. This by usb cable.
As i connected it to Vista it popped up asking me for a driver which i chose to install when Windows update said there was an update for it.
Error messages included:
This is my greeting message as soon as i start my computer and login to Vista:
http://www.premier69.com/images/stories/Capture.JPG
Installing the driver like Vista want to:
http://www.premier69.com/images/stories/Capture1.JPG
And the not so helpful error message:
http://www.premier69.com/images/stories/Capture2.JPG
If any of you would like, in order to help i can allow remote controlling of my computer.
I will offer compensation via paypal for anyone who will take the time to remote connect to my computer and fix my problem, i have been trying for a very long time now and i cant figure it out.
we can discuss level of compensation but be aware i am by no means rich.
If I understand u, try this
1- donlod Window device center from here
http://www.microsoft.com/downloads/...f1-e46a-4a5f-a791-09f07aaa1914&displaylang=en
choose for Windows Vista (32-bit) or (64-bit)
& let me know
I have already tried that, i downloaded the x64 version for my vista installation and i start the install file, the progressbar loads fully then retracts and the installations program self-closes. no messages or anything.
i am serious when i say i am really stumped by how my system is acting...
try installing WMDC in safe mode, sounds like a file permissions problem
yup i tried that too, it didn't even open the installation wizard.
Got same problem - fixed with changing registry permissions
hi guys,
i was battling with this for a few days after a reinstall of my laptop. updated to vista sp2 and there you go, couldnt sync and got the error.
after mucking about i saw there were some access denied errors for the registry. this is what i did to fix it:
registry key in question:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost\WindowsMobile
- Right click -> Permissions -> Advanced
- Took owner ship of the registry key
- Gave the Users group Full Control.
Then in device manager:
- Uninstalled my Microsoft Mobile Remote Adapter
- Scan hardware changes
and then it installed properly and am able to sync again
aj
thank you
Thank you thank you thank you thank you thank youuuuuuuuuuuuuuuuuuuuuuuuuuu
i have been in this issue since 2 days,and what got me crazy after i have read your post that I'm the one who restricted the access to this registry using a domain policy(I'm a network administrator) for security reasons,but i don't know why i didn't got it @ first.
I granted my self the permission and it was able to install the drivers and letting WMDC starts.
thank youuuuuuuuuuuuu again and again and again.
ajohan said:
hi guys,
i was battling with this for a few days after a reinstall of my laptop. updated to vista sp2 and there you go, couldnt sync and got the error.
after mucking about i saw there were some access denied errors for the registry. this is what i did to fix it:
registry key in question:
HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\Svchost\WindowsMobile
- Right click -> Permissions -> Advanced
- Took owner ship of the registry key
- Gave the Users group Full Control.
Then in device manager:
- Uninstalled my Microsoft Mobile Remote Adapter
- Scan hardware changes
and then it installed properly and am able to sync again
aj
Click to expand...
Click to collapse
I have a new HTC HD2 device and windows 7 enterprise on my laptop.
I did all, but no use
The Options, Schedule and status items in ActiveSunc are inactive.
Also when I open the ActiveSync, there is a message showed on my phone: "To synchronize your device with a desktop PC, install install synchronization software from your ....."
What can I do??????
Please help
Hi!
Had someone tried to run Symantec pcAnywhere mobile on Touch HD?
I've got the following Problem:
Installed by .cab-File
Started, works great on this huge Display!
...but: After rebooting my PPC the following happens:
If I try to start now, it dosen't work anymore.
It seems, some components are missing.
What can I do?
Thanks,
Nomel
Hi Nomel, i have the save issue's. after several soft and hardreset and different installation of applications, i also find the error in symantec pc anywhere mobile.
i don't know how. but after a hardreset and a clean system i install only pca mobile. works first fine. but if you softreset your hd you cannot anymore run or reinstall it !!!!
yesterday i tested with making a backup before , softreset and the same !!!!!!!!!!!!!!!!!!!
at moment i have no solution.
Symantec pcAnywhere mobile install on HTC Touch HD
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
I have been using PCAnywhere for months with no problems after many soft resets.
mpconti said:
Hi!
I have the same problem.
When I first install pcanywhere 12.5, it works fine, but in the first time I soft reset, it stops running.
After that, I have uninstalled and try to install again, so it give me this message:
‘Installation was unsuccessful. The program or setting cannot be installed because it does not have sufficient system permissions.’
The interest thing is that I have a Samsung Omnia with windows mobile 6.1 too, and works without any problem. I can soft reset and it still working.
The bad news is that I have contacted Symantec Support and they don't know what is happening. I start in the beginning of this month my first contact and four attendant try connecting with my pc, staying 3 hours and still have no solution for this problem.
They say that will contact me, but I’m still waiting.
If anybody knows how to resolve, please tell me. If I find the solution, I’ll put it here.
Thanks for everybody.
Click to expand...
Click to collapse
I'm having the same problem. I'm using NFSFAN's custom ROM on my HTC Touch. Only on his later 2 versions does this problem occur. I believe he got the ROM build from the Omnia....
So, the problem could be some kind of conflict between the program and these newest builds of WM 6.1.
Damn....
I have the same problem with rom 1.56 ITA . with the previous version everything was ok even after softreset. with the new one I find the described error during install
htc touchpro2 pcanywhere solution
i have installed pcanywhere 12.5 on my htc touchpro 2 and it worked great until i soft reset it (powered down and up again) and i get the same problem. wont run and wont reinstall. so i threw pcanywhere 11.5 in the ol' cd rom and just installed the moble onto my phone and it works just fine. i still have 12.5 installed on both my machines and the mobile 11.5 connects to my xp box great. not sure about vista or win7. try that guys. hope it works!
This worked for my Touch Pro 2
I found this fix somewhere (don't remember where).
But if you rename
MFC80***.DLL to MFC80***.dll
there are a few of these files in the Windows directory.
I used resco explorer and hit rename and it automatically made the .DLL to lowerecase .dll and voila, pcAnywhere mobile worked.
You may have to do a fresh, new install and then do the rename before a reboot.
I hope this works for you.
(windows directory of the phone)
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
kbriaz said:
Hi,
I have Hd2, have few questions please.
1) Does mobile version works with 3G (HSPDA) or just Wifi ?
2) How to connect from your mobile ? mine always gives me the error unable to connect though my host is active & waiting for incoming connection !
3) Do i need to config my router ? open ports ?
Many thanks for your help.
Click to expand...
Click to collapse
This is actually the HD forums. You'd be better asking this in HD2 forums