S200 background light problem - JAMin, XDA Neo, S200 General

Hello everybody! I'm having problem with my qtek s200 (with swedish firmware). The background light is turning off every 10 seconds. I can change it back but whenever i turn the monitor off with the red button at the right and then turns it on again it's back at 10 seconds. Anybody have had the same problem or know anything I could do to fix it.
G4 model and I think it's CID-locked..

I have the same problem
I tried changing the registry with no luck

Related

Unintentional turn-on in the Jamin?

I've tried to do a search on this problem, but nothing came up. Maybe I'm searching the wrong keyword. If someone know anything about this, please advise. I got the Jamin recently, I pretty much went right into installing the 2nd ROM (vs the recent 3rd ROM). So I have nothing to compare to. For whatever reason, my Jamin keeps turning on by itself every few minutes. Not only that, it won't automatically turn off using the Power setting. Whenever it's time to turn off (ie, after 1min), the thing automatically turns on again (with the backlight on). I'm not sure if this is a ROM problem, a hardware problem, or software imcompatibility. Please help.
Hey
I've also had this happen on my Prophet - it seemed to fix itself after a while, but I also had the problem:
press power button to turn off
press power button to turn on, and backlight was off
couldn't get the backlight on again except going through the backlight settings!
I did fix this using...
http://www.ppc-welt.info/community/showpost.php?p=728080&postcount=27
Run this app on your prophet, and your backlight is back to normal.
I've found this problem in a number of threads - I'm updating them as I find the solution!
--Tosh

At times Backlight doesnt light up again - why?

Perhaps someone has an explanation why my backlight doesnt light up again when a button is pressed?
From time to time, the backlight goes dark and even though I am pressing buttons, screen, power button, etc, the backlight doesnt come back on. I have to search for the backlight adjuster (in the dark) in order to switch the light back on.
I have wisbar advanced and SpbPocketPlus installed - might that effect this somehow??
Thanks for any advice!
i have exactly the same problem and donĀ“t know a solution. ;-(
Wisbar Advance 2.6.0.1 is installed, SpbPocketPlus not.
I think it comes more often if i use the camera, but it is not reproduceable...
I've never had this problem before, I dont have wisbar installed.
You may be doing a press and hold function on your device. Quick press of the power turns it off, a long press turns off the backlight. the only way to turn it back on is to long press the power button.
also you have settings that turns the back light screen off, which may be affecting this.
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Squuiid said:
This problem used to occur on the O2 XDA2i ALL THE TIME!
Just my 2 cents. Sorry, not very helpful, but defo a problem we've seen before. You hvae to go into settings to start the backlight back up.
Click to expand...
Click to collapse
It hasnt happened lately (actually ever I posted this thread strangely enough) but its quite embarrassing when you have to find your way through a dark screen.
I put a large symbol of the brightness adjuster in one corner (using SpbPocketPlus), so I only have to find that symbol rather then start --> settings --> etc..... its not a cure but it makes it easier switching it back on.
If anyone has a remedy for this problem, please share...
Not sure why this happens, but I fixed it using...
http://www.ppc-welt.info/community/showpost.php?p=728080&postcount=27
This app - run on your prophet, and all is back to normal. Keep a copy on your SD card...
--Tosh
didn't help
I tried and still use the neo backlight fix. But this fix is only for forcing via startup a longer measured time for the light to stay on.
I too have suffered with the problem of the backlight not coming on every now and again after starting up the prophet. I've had this problem on numerous roms too which is interesting. What more interesting is that even in the days of my owning a Blue Angel (Orange M2000, MDA) I STILL remember having this intermittent problem with the light not always coming on. Only way I fixed it was to simply soft reset the device. Whenever I did that and when I do it now, it stops it happening for week or so at least.
I still use the neo back light fix too as my phone has the quick light turn off problem without it. Neo certainly created a good fix no mistaking.
All the best
Nicholas
i had the same problem...just put the same value to the standby and backlight ...( both 3 mins on mine)...and never happened again....i think it helps...
I have a strange backlight & power-off problem on my Qtek S200:
When the backlight is switched on and I press the Power button shortly to switch it to sleep mode, the screen gets blank but the backlight does not go off.
So now I wait first when the backlight timer goes off before switching the device to sleep mode manually.
Another problem:
When the power settings is set to switch the device off automatically, it reboots when the timer goes off. So my solution is to disable the auto power-off feature.
How to fix this to the original behaviour ?
I tried the neo_backlight_fix and set the backlight timeout to the same value as the standby timeout, but with no avail.
My Qtek S200 has still the original old ROM (G4 model) and Windows Mobile 5.0:
ROM version info:
IPL: 2.10.001
SPL: 2.10.001
GSM: 02.07.20
OS: 2.10.7.25
Please help me to solve the problem.
Maybe I messed up a lot and the only solution is to install a newer ROM which is available since some time at qtek.nl.
Thanks in advance.

power and backlight settings on 9100

Hi,
I have upgraded my 9100 with QTEK latest ROM update (2.17.7.6FRE).
Since then, I have difficulties setting the power and backlight settings. They seem to be overriden sometimes.
I want my phone tu turn to stand by after one minute when battery powered, but it doesn't. Backlight switches off after 30s OK, but the phone stays on.
It seemes to be related, but sometimes the backlight settings is reset to 0 (no backlight) and I have to open the control panel to reset it to middle.
Anyone has an idea?
Tahnks in advance,
Guillaume

Call button on MDA Vario stays lite all of the time.

Hello:
I have a tmobile MDA Vario and recently the green call button has stayed on constantly. At the same time 5 of the buttons on the key pad has stopped working, the blue light on the keypad stay lite even when it is closed.
Does this sound more like a O/S issue or a mechanical issue. Any suggestions from anyone?
Thank you

blue led allways on

Recently my qtek s200 stoped flashing the blue light from the bluetooth and never turned off
tryed soft reset, batery remove for several minutes and nothing... the light turns on the 1st instante i powerup the device
is this a hardware malfunction or you think a hard reset will solve the problem?
Hi,
I have this problem too
could somone help ?
Regards

Categories

Resources