Hi,just setting up my M700 and need to transfer my themes over.Usually do this by just restoring from sprite backup. However this time I did a complete clean install. Problem is I cant find the normally present themes folder so as for them to appear in the today menu. Usually its in the windows folder but I cant find it.Where can I put them oe where is it located (the're a lot of them in a folder I created called themes) so as to be visable to the device ie usable/selectable as today backscreens? Thanx all.
The .tsk files should be stored in \windows
When you say that you can't see it, do you mean that you can't see \windows in the explorer on your PC when the phone is connected via ActiveSync?
If this is the case, then it might be due to the fact that the \windows folder is hidden and the explorer on your PC is not showing hidden files and folders.
Try also in My Documents.
Thanx for the reply,unfortunately didnt work
@Its : I can see the windows folder in both my trinity and pc
@MacGuy2006 : Have looked in my documents to no avail
Perhaps another way of posing the question would be how or where do I put additional themes so i can use them. I would rather not have them just put in like that in the windows or whatever folder as I'd like to keep them tidy and organised in their own sub-folder called themes.That way I can edit/remove/add them easily. What pathway or tweak if possible could I use to run them off the storage card to save on space?
Thanx again.
dabs1 said:
Thanx for the reply,unfortunately didnt work
@Its : I can see the windows folder in both my trinity and pc
@MacGuy2006 : Have looked in my documents to no avail
Perhaps another way of posing the question would be how or where do I put additional themes so i can use them. I would rather not have them just put in like that in the windows or whatever folder as I'd like to keep them tidy and organised in their own sub-folder called themes.That way I can edit/remove/add them easily. What pathway or tweak if possible could I use to run them off the storage card to save on space?
Thanx again.
Click to expand...
Click to collapse
You can put the tsk files in the ROOT directory "/" of your miniSD card and WM5 will find them. I do this to save storage on my phone.
Matterhorn said:
You can put the tsk files in the ROOT directory "/" of your miniSD card and WM5 will find them. I do this to save storage on my phone.
Click to expand...
Click to collapse
ok thanx matterhorn. May have to do that as its proving a pain.Just that I have more than enough space on the trinity itself.just cant get them to be seen
I download the zipped up tsk file to the storage card.
When I upzip it (by double clicking on the new icon shown in my storage card it gives the options of where you want to send it). I send it to the "my dococuments" on my phone. Then when you go into "settings", then "today" screen you'll have a choice of all your new tsk files added to the original ones.
Related
Hope this is the right place for this....
I cooked & downloaded 3.17.03 (from Jeffs Kitchen) and have two problems:
1. When I go into Excell or Word now, I can't see any files that are loaded on the memory card. I have to use File Manager and double click the file I want. I can't find any way to inform Excell where to look either.
2. I also can't find anyway to add programs to the quick launch program (tdLaunch). I went to the authors homepage and dowloaded the PPC 2002 cab file but this won't run on my XDA. Curious that the author doesn't cover this most basic need in the README file. (I can't find any Help file for this even tho' I selected Help Files with all programs I chose to include.
Anyone know the answer to these problems?
A number of the attractive features mentioned in the ROM Kitchen announcement are not present on the version dloaded from Jeff. (Absence of tutorial at start-up, localisation to Central Europe etc, auto-config).
If any of the Developers see this, could they please comment why this is? (other than Jeff is not using the Developers ROM enhancements??)
Many thanks.
QUOTE 2. I also can't find anyway to add programs to the quick launch program (tdLaunch). I went to the authors homepage and dowloaded the PPC 2002 cab file but this won't run on my XDA. Curious that the author doesn't cover this most basic need in the README file. (I can't find any Help file for this even tho' I selected Help Files with all programs...........
Tap "start",...tap "settings".....tap "today"...... at base of screen tap "items"......tap "tdlaunch".........tap "options" you can add, delete, etc from there. Hope this what you are wanting.
1. When I go into Excell or Word now, I can't see any files that are loaded on the memory card. I have to use File Manager and double click the file I want. I can't find any way to inform Excell where to look.....
Try opening word or excel, at the base of screen tap "tools".....tap "options", take a look in there for the defaults for saving and viewing files. Might help.
cruisin-thru said:
Tap "start",...tap "settings".....tap "today"...... at base of screen tap "items"......tap "tdlaunch".........tap "options" you can add, delete, etc from there. Hope this what you are wanting.
Click to expand...
Click to collapse
Blimey, I must say Inever noticed that "Options" option before!
Thanks a lot, yes that solved it!
cruisin-thru said:
1. When I go into Excell or Word now, I can't see any files that are loaded on the memory card. I have to use File Manager and double click the file I want. I can't find any way to inform Excell where to look.....
Try opening word or excel, at the base of screen tap "tools".....tap "options", take a look in there for the defaults for saving and viewing files. Might help.
Click to expand...
Click to collapse
No dice on that one unfortunately. Even tho' i tell it i want to save to Storage Card 1 it won't look in there.
It's not this "ignore my doc" file is it? I used ot have one but now I can't see one in the root dir of the card.
:?
Did you try reformatting the card, after backing up the files of course. Also have you actually saved a file to the sd card since your upgrade?
cruisin-thru said:
Did you try reformatting the card, after backing up the files of course. Also have you actually saved a file to the sd card since your upgrade?
Click to expand...
Click to collapse
No, I havn't tried reformatting it. (After all its the ROM that was changed not the location of the data). And I just tried saving new files- They ARE written to the SD folder "My Documents".
But the XDA still doesn't see any files in the other folders on the card...
you have to save those files in the My Document directory on the SD Card. thats how MS did it.
Hi.
Actually, I dimly recalled that the file ignore_my_docs IS necessary for the OS to 'see' files on the Memory cards which are outside of My Documents.
I located a backup and found the ignore_my_docs file, transferred it over to the XDA and my problem was solved.
Not actually sure how the original was deleted. :?
Thanks for the feedback anyway.
Cheers
i have an 8525 and a 1gig card
how do i put programs on it and use it as a back up with resco
claus2488 said:
i have an 8525 and a 1gig card
how do i put programs on it and use it as a back up with resco
Click to expand...
Click to collapse
First may I suggest you look in the WiKi there's a link to it at top of page. When there look for the Hermes section and then the FAQs and beginners sections.
To put programmes on card link your device to PC and Active sync will start.
Find programmes/applications on the net download them to the PC.
Rgwy normally come in to formats CAB or EXE files they may also be zipped.
If I get a choice I choose the Cab file because on the Active sync screen there's an Explore button which I use to go to the storage card and copy across my downloaded CAB file. I then use file explorer or the like on my device to go to the CAB file and tap it to install it. Do Not Open Cab files on the PC first.
EXE files you open on the PC and they will be installed by active sync automatically.
There are loads of freeware applications and quite a few pay ones that are worth getting.
Have fun
EDIT: to backup to storage card there will be an option to choose location in your bacup programme.
Mike
Hello I am very new to this and i am having trouble putting programs on my wing. I wanted to do the page pool and the iphone theme but i don't know how to put the files on my phone once i downloaded them. I have my phone synced to my laptop. i tried to copy and paste them put when i go to my phone the paste option is not available... i need help an im sorry if i sound dumb. I was able to put battery status on my phone fine, but that was because it installed itself...
If i'm not mistaken, you can just drag them and nothing bad will happen.
In ActiveSync, click the "explore" button, then click "my windows device", go to program files, make a new folder for the respective applications, then copy them there.
You can then run the .cab's from your phone via the File explorer
it still won't let me. when i try to drag the .cab file into the folder the no sign is displayed....
What folder are you trying to drag it into?
Screenshots? Probably unneeded, good to have.
Hi, I have an 838pro with wm6 running on it. I have a lot of programs on the memory card that dont appear in the 'programs' bit of my pda. I was wondering if thats standard, and if so: can i change that?
Also is their any hack / program that will enable me to use the front (video calling) camera as just a usual camera?
Thanks alot, have a great day.
First of all you are posting at the wrong thread. You have a Dopod 838 pro (Hermes) & you are posting at Wizard forums.
For the programs at your storage card you find with your file browser the executable that you want to ''go'' to your programs folder, press copy & then go to My Device - Windows - Start Menu - Programs & then select paste as sortcut. You must do that to every program that you want.
For your front camera I don't know because my Wizard don't have one .-
copying the exe is a bad idea
if the exe depend on dlls or other files located in the same
dir it will not work as exe are usually much bigger then shortcuts
you make shortcuts to the program using
total commander
and if you installed the programs on the sd card before you
changed rom or changed device or something like that
they will never auto showup
much like if you installed programs on an external harddisk for your
computer and connected it to another computer new or a friends pc
they would also not show up
apart from that if they depend on settings added to the reg of the pda or computer
for that matter and you changed pda/rom or computer
you will have to reinstall them
but then not all programs add shortcuts to programs depend on how
the cab file makers made the install
Rudegar said:
copying the exe is a bad idea
if the exe depend on dlls or other files located in the same
dir it will not work as exe are usually much bigger then shortcuts
you make shortcuts to the program using
total commander
...
Click to expand...
Click to collapse
I agree that's why I have write:
samxein said:
...
For the programs at your storage card you find with your file browser the executable that you want to ''go'' to your programs folder, press copy & then go to My Device - Windows - Start Menu - Programs & then select paste as shortcut.
...
Click to expand...
Click to collapse
hi folks, i finally got a way to copy office / PDF files directly from computer, these files will show up in Office Hub/ Adobe Reader's Document List
before you start, make sure you get TouchXplorer work on your phone.
1. you need to do some registry hacks to make the wp7 device visible in My Computer/ Explorer , here you can see the tutorial http://forum.xda-developers.com/showthread.php?t=915664.
OR: Modify these Registry Entries
Code:
Windows Registry Editor Version 5.00
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_045E&PID_04EC&MI_00\6&210a541a&0&0000\Device Parameters]
"EnableLegacySupport"=dword:00000001
"PortableDeviceNameSpaceExcludeFromShell"=dword:00000000
"ShowInShell"=dword:00000001
Once you're done , CLOSE ZUNE, you should see 2 wp7 devices in your computer, they're exactly the same. just choose one open it and you'll see folders like Album Video Music etc, these are your zune folders.
[TIP], if you open your device/storage and see nothing there, you have to delete one registry key and reconnect your phone.
the registry key is :
[HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Enum\USB\VID_045E&PID_04EC&MI_00\6&210a541a&0&0000\
Device Parameters\DeviceSelectiveSuspended]
delete that key , and you'll see those Zune folders.
2. now we can copy files to the Phone and make them show up in Office Hub or Acrobat Reader.
first, pick one of the Zune Folders, never create one 'cause you'll never see it from the Phone. just use the existing folders , i recommend "Video" folder.
copy a file to the Video folder, eg. officetest.docx,
open your touchXplorer, goto "My Documents"\"Zune"\"Content"
you'll see folders like 0100 0200 0300 0400 0600, these are the music / pictures / video folders of zune, and all files inside are named using numbers.
now open "0400"(in my case, might be different on other phones, you have to find it yourself) and you'll see a folder named "02", open this "02" folder, what do you see?? yes,a "20.z"(the number varies) file, this is exactly the officetest.docx you just copied to phone.
rename the "20.z" files back to "officetest.docx" using TouchXplorer , double click the file ,it will open in office .
you can cut it, and paste to \My Documents of your phone, open Office Hub, you just have the "officetest.docx" there
even you renamed the "20.z" file and moved it to \My Document. you can still see the "officetest.docx" in the "Video" folder on your computer, you should delete the "officetest.docx" to save some space, it's safe, actually, when you rename the "20.z" file to "officetest.docx", the phone did a copy job , not just rename.
EASY Enough ???
3. well, you can do the same with .PDF files if you installed the Adobe Reader.
once you renamed this "xx.z" (xx is a number) back to eg. "mypdffile.pdf" using TouchXplorer, you may try to double tap the pdf file and open it. but to PDF files , it's NOT working, the adobe reader will say "invalid path"
I know exactly what's going on, office files are opened by office apps like word etc. they're WP7 Stock programs from M$ and got very high privileges, they can access any folders. but to poor Adobe Reader, it can only access its isolated storage.
so what we need to do is: find adobe reader's isolated storage folder and move the "mypdffile.pdf" there, you can then double tap the file and open it. and when you open Adobe Reader , you'll see the "mypdffile.pdf" right under the "Documents" list.
the Adobe Reader's IsolatedStorage folder is at
Code:
\Applications\Data\BC4F319A-9A9A-DF11A490-00237DE2..\Data\IsolatedStore
just put the pdf files here
-------------------------------------------
PS:
1. I'm chinese and my english sucks, sorry if you can't understand
2. the office program on WP7 and Adobe Reader 9.0 for WP7 really sucks
Nice Tutorial
Will check it out later.
Agree with you on 1 thing, Adobe of Windows Phone 7 sucks.
Office on the other hand is great.
please can you explain exactly what registry you must delete to see the folders thanks.....
tommyDC2006 said:
please can you explain exactly what registry you must delete to see the folders thanks.....
Click to expand...
Click to collapse
DeviceSelectiveSuspended.
I think it's easier to email yourself with your needed documents, and then downloading it with the phone from the email.
tommyDC2006 said:
please can you explain exactly what registry you must delete to see the folders thanks.....
Click to expand...
Click to collapse
it's "DeviceSelectiveSuspended", sorry for the delay
andrusca said:
DeviceSelectiveSuspended.
I think it's easier to email yourself with your needed documents, and then downloading it with the phone from the email.
Click to expand...
Click to collapse
to me , i have some huge documents , over 50MB each, i have to copy them this way 'cause no email service can attach such big file.
18MB
I sent myself an 18MB PDF file earlier today. Checked my email on my Windows Phone 7 Device. Clicked the file once (waited for it download). Then clicked the file again to open. Adobe Reader was blank for about 15 seconds then loaded it.
I used Windows Live Mail
Nice one, I will have a look to see if I can place mobi and prc files that are for e-book reading using amazon kindle in its own isolated storage area as well.
I am 99% confident that this will work just need to keep track of the new files and should only be needing a chang to .mobi or .prc for it show up in the kindle app (that is if you have tagged your books correctly)
whetstone said:
Nice one, I will have a look to see if I can place mobi and prc files that are for e-book reading using amazon kindle in its own isolated storage area as well.
I am 99% confident that this will work just need to keep track of the new files and should only be needing a chang to .mobi or .prc for it show up in the kindle app (that is if you have tagged your books correctly)
Click to expand...
Click to collapse
yes , this would work, just find your kindle program's isolated storage folder.
i suggest look into your \application\install folder to locate the kindle program, there're a lot of GUID Named folders. open one by one until you find the kindle program, remember this GUID, and find the same GUID folder under \application\data you'll reach kindle's isolated storage
heeeelp
dear
i do the above
and i found 2 new devices
but no think inside it
i cant find the register key you say for delete if i cant see file
i use windows vista
can u help me
dr.amer said:
dear
i do the above
and i found 2 new devices
but no think inside it
i cant find the register key you say for delete if i cant see file
i use windows vista
can u help me
Click to expand...
Click to collapse
Oh no what have you done?
What ROM are you using?
If it is XBmod/yukixda back to the future ROM, which came out 28 AUG why are you using instructions dated January?
I don't know what those registry hacks do.
If you know exactly what you did, tell us Exactly.
If not I think you will have to re-flash the ROM.
Good luck.
Still nothing is coming up in the folder. What do I do? and there is no folder in there starting with 6 they start with 7?
you can copy the files by using the sd reader,and then open it through the file manager...