JPEG issues - 8525, TyTN, MDA Vario II, JasJam General

Hi Guys, whenever I receive an e-mail which contain JPEG pics i cannot view them . I an using the new rom and radio is there something I can do in the registry or any software I can install to fix this problem.

Which new ROM? Please provide more specific information about what model of Hermes you have, what provider you're on, what version of firmware it is, etc...

rom version 2.06.502.3
radio 1.34.00.10
protocol 32.67.7220.10H
cingular barbados
blackberry connect 2.1

Related

QTEK ROM Upgrade / Urgent

Updated rom's to version Radio 4.16 and Rom 3.15.15
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RUU_ENG.exe = ROM upgrade
URL: http://julia.online.o2.nl/xda_downloads/xda_software1/RSU_ENG.exe = RADIO upgrade
Hello i was wondering if the above ROM updates will work on my QTEK 1010:
ROM Version: 3.16.13 ENG
Radio Version: 3.19.01
I mean anyone tested if before or managed to upgrade his QTEK with the above ROM versions from O2 and were there any complications!!
:?: :?: :? :?: :?:
Thanks
Yes I did and it worked fine. I have it running on T-Mobile MDA, Qtek 1010 and Eurotel dataphone (rebranded Qtek). No problems.
I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis
It has been answered a few times, look through fora. it's a general pocket pc language change question, but applies to this one too. You need to rewrite the ROM header to match your device. Can be sort of tricky if you don't know what you're doing.
Did you install it
I have the same qtek with 3.16 and 3.19 shall I do it or wait to uk version?
If you don't mind O2 startup screen & O2 autoconfig...
supplier or distributor
nanis said:
I tried to upgrade and got the following error:
----------------------------------------------------------------------------------
The ROM Image that you are trying to upgrade is not compatible to your pocket pc.
Here are there differences:
Your device information:
ModelW10A:007
ROM Version: 3.16
Language: English
Your upgraded image information
ModelW10A:001
ROM Version: 3.15
Language: English
Please download the compatible utility and try again
-----------------------------------------------------------------------------
So where is the problem?
Thanks
nanis
Click to expand...
Click to collapse
Hi,
My advise to you is to try to get the latest rom upgrade from
either your supplier or distributors.
Also be very wary and careful when you got advice from this
forum on where or which website to download etc especially the
one which you do not have any informations if it suit your device
or not. If it is not suitable then after downloading it to your device
it will freeze up and you have to get it replaced. These people who
give advise take for granted everyone who view this forum are
professional like them. They never realise there are lots of new
users of the device that are trying to find out more informations.
Sometimes no warning was given to you when they just give you
the website to download etc.. I am one of those new user and also
I believe one of the victims too. I do support their intetests in this
forum but not the way some of the advise are given. Hope they
got the message. So good luck to you and happy upgrading.
Why on earth would you want to go from 3.16/3.19 to 3.15/4.16? Makes no sense to me...
bamse: because it's better
I'am used xda radio upgrade 4.16.00 with qtek
it is fine

PM10A No GSM on bootup :(

Hi people.
I have an ImateJam PM10A that i require help with.
On boot up i notice it says "no GSM" D.1.12.00 WWE
The sys info i get from device information is:
ROM Version 1.12.00 WWE
ROM Date 05/28/05
Radio version BLANK
Ext rom version 1.12.119 WWE
As a result no GSM whatsoever.
Hope you guys can help me ?
Kind regards,
Mitch.
did you do anything to your jam before this happened? i dont know too much about this stuff but i would say reinstall the rom, heres what clubimate has to say about pm10a rom upgrades:
If the model number indicates PM10A, then the customer should upgrade with the Generic Worldwide English ROM Build. You will not be able to install the North American JAM (850) ROM. This WWE build does not include the connection settings for the US operators found in the North American build, though these are all available to download separately from club i-mateâ„¢.
Hi..
Ur r seeing no GSM on boot because radio is missing,meaning no phone,just the PDA...
U just have to reflash radio,and for doing that:
go to the ftp from here,download MAupgradeUt_noID.exe,and a radio ROM of ur liking(1.12 is preferable,it is radio_.nbf file),put the 2 files in 1 folder,remember to also put RUU.dll in it,enter ur phone in bootloader mode by pressing power button,camera and reset(i guess,it's been a while since I have'nt reflashed a Magician :wink:,anyway make sure by reading the wiki page from here),then run MAupgradeUt_noID.exe,and follow on screen procedures...
Good luck...
RAGO :lol:
Tried an upgrade to the latest UK wwe full image using MAupgradeUt_noID.exe and also the latest radio rom.
whilst the upgrades complete ok the radio version and protocol version still remain blank??
any ideas on what the generic world wide flash file is called and i will give it a go.
mitchtech said:
Hi people.
I have an ImateJam PM10A that i require help with.
On boot up i notice it says "no GSM" D.1.12.00 WWE
The sys info i get from device information is:
ROM Version 1.12.00 WWE
ROM Date 05/28/05
Radio version BLANK
Ext rom version 1.12.119 WWE
As a result no GSM whatsoever.
Hope you guys can help me ?
Kind regards,
Mitch.
Click to expand...
Click to collapse
Hi, what happen ur imatejam before, In my experience, last time due to I updated the the firmware via SD method, finally after boot same as ur metioned situation. I bring it to service center, service cneter said that is mainboard problem, and they replaced a new mainboard for my O2 mini(imatejam) and upgrade the boot loader to v1.02. Try bring it to service centre to checking it.
Regards,
mmgrilmm
need a shipped ROM for a MDA Compact PM10A, T-Mobile, english
guys, please help me with this, it's urgent for me! if you have it, put it on ftp://ftp.xda-developers.com/Magician/Shipped_ROMS
Thanx!

MMS is not working

I have a sawa (Saudi Arabia) sim card on my jam. i put the settings given over here ( http://www.mms.net.sa/Templates/productList.aspx?postingId=58&id=5 ). My phone connects to gprs but I cannot send mms,I recieve mms notification but i cannot download it. Is there any problem with my phone
this is probably already mentioned here somewhere.. but the earlier versions of the jam rom had an issue with MMS and required a patch for rom 1.03 and 1.06 versions. the later versions of the rom dont require the patch anymore, and they are probably easier to find then the MMS patch. mind you im assuming you have an imate jam.
SpeedN
My rom version is 1.12.00 WWE, Radio Version 1.12.10, ExtROM version 1.12.128 WWE.I think I also put the settings update from the club imate website

Several upgrading questions

Hello,
I have a Qtek 2020i which has an english ROM (the details are at the bottom).
This was bought in Portugal.
Where can I find compatible ROM, Radio, Protocol and ExtRom upgrades?
Thx
JM
ftp://xda:[email protected]_Ext-1.11.162_Radio-1.04_O2stuffstripped.rar
with Radio versoin 1.04
Hello,
How do you know it is compatible with Portugal's mobile operators?
Does this upgrade include the Protocol version 1337.42?
Where can I find the changes between my current version and this one?
Something like a ChangeLog (if you know the terminology).
Thx
JM
Essential, each of the devices from different suppliers is the same, apart from maybe the casing.
The operator settings are stored in the extended rom (search the forum for instructuions on how to access this), and these are what you are likely to need to get it working properly.

Hermes BT Connection Problems

Hi to all gurus, devs and peeps of this forum.
I just received my new 8525 in the mail.
Currently using:
ROM version : CRCs PHKv12r9
ROM Date : 11/06/07
Radio version : 1.16.00.00
Protocol Version : 32.53.7018.01H
- I am having a major problem when I try and beam files through Bluetooth.
1) I do not show a progress bar - A.K.A Percentile of compleation
2) I have a hard connecting to device after sucessful pairing
Is there a problem with my phone ? Or is every HERMES act like this one ? I'm thinking it is my Radio Version that is too low but im just guessing...
Sorry if this is a double post I have been reading forums but haven't found an answer to my questions so I figured I would post.
Thank you all ...
I also have trouble setting up my wap setting with my provider FIDO in Montreal, Qc ... If any can help I would really appreciate it ...

Categories

Resources