Database Users

TomTom - GPS receiver with short memory?

Hi,
I've trawled the forum and I've followed all the TomTom setup procedures. The Problem is they seem to be for people who can't get TomTom working at all. I can get it working, just awkwardly.
Once I pair with my GPS receiver and go into TomTom i can get a connection. However when i quit TomTom and turn off the GPS it seems to forget. Next time I turn it on I don't get a connection.
The way I understand TomTom is that it seems to wait for the GPS receiver to contact the phone. This seems odd as I would have thought the phone would be the one to initiate contact.
Anyway my GPS receiver just seems to forget what phone it was connected to. TomTom obviously isn't forgetting the port, windows obviously isn't forgetting the pairing. But Every time I use it I have to re-pair the receiver (thus reminding the receiver of the phone it's supposed to be bonded to). It's beginning to drive me a bit insane.
Anyone else have this issue? Perhaps it's to do with my incoming and outcoming ports? Hopefully someone has already solved this? Not seen any references to it anywhere.
Lewis

Hello,
Which version of Tomtom are you using ? The last one (5.21) ? If not, try to upgrade and try again.

Yep 5.2 latest release.
I was hoping upgrade would fix it but alas no.
Lewis

BigDamHero said:
Yep 5.2 latest release.
I was hoping upgrade would fix it but alas no.
Lewis
Click to expand...
Click to collapse
Don't mean to be picky, but 5.2 or 5.21?
I've held off installing TTN on my Wizard, as it works fine on my iPAQ 4700, I have a cradle for that, and according to ttcode, my current device is actually my old 3970, not the current iPAQ... Last week, I had a couple of hour drive to do, so I thought I'd give it a whirl. After an email exchange with TomTom support (who were more helpful than I'd originally given them credit for), I had a new activation code for the Wizard. Here's what I did, from a fairly recent hard reset with no previous TTN install whatsoever. Skip the mail if it doesn't look helpful, but I'll detail my steps in case it helps anyone else...
Although I believe the PC install is mended in 5.21 I copied the map and voice cab files from the CD to my SD card and installed them from there. The GPS drivers and main app I installed from the download I got from the TomTom support site by running the setup util on my PC. Once everything was installed, I moved the maps which seemed to finish up in a sub-directory on the card to the root of the card.
I paired the GPS (my old Emtac BT one) and selected serial port profile. I tried all the offered serial ports in the "Other BT GPS" list in TTN but none worked. Then I went to 'COM Ports' in Comm Manager/Bluetooth Settings and selected "New Outgoing Port". I picked the GPS from the list of paired SPP devices, and it created a new BT COM port on COM6. That definately hadn't been in TTN's list of BT com ports before, but is now there in the list with about half a dozen others. I selected that in the "Other BT GPS" list of BT ports, and TTN connects to the GPS each time.
As I said, I'd recently hard reset the device to try and prove a problem with my BT car-kit soit's quite possible the clean install was the secret, but try creating a new outgoing COM port against the GPS and see if TT remembers that...
Dox

BigDamHero said:
Hi,
I've trawled the forum and I've followed all the TomTom setup procedures.
Click to expand...
Click to collapse
Which?
There are 2 general ways to set it up, 1 works 100% (i use it so know it does ) 1 i dont use and have never tried so may well work in the reverse direction and be causing you errors.
The way i set up tomtom; pair the BT GPS. Open an OUTGOING port to the BT GPS, set my GPS as OTHER (wired/cable) NEMA device (NOT bluetooth) in TTN5. now my tomtom connects to the bluetooth, not the otherway round. This method has thrown up no errors for me at all.
If you have followed the reg edit/hack to show the GPS page in connections then i dont know how the settings differ and the possible results this could have on connection issues.
Let us know which way you are going

I have the exact problem as BigDamHero. Each time I wanna use TTN, I need to delete the previously paired BT GPS and then pair it again, otherwise the TTN will just say No GPS Device. I use TTN v5.21 and Wizard with Windows Mobile 5. I tried my BT GPS device on my brother's PDA which runs on Windows Mobile 3, and it connects like a gem every time. I am also looking if anyone has solved this issue, cos it is tedious re-pairing every time.

Had the same problem until 5 mins ago! Found an explanation in another thread, but only in Dutch..
Here's how to do it:
Turn on GPS
Activate bluetooth on device, go to BT parameters, delete previous pairing like you're used to
Create new pairing, choose GPS, enter passkey, check Serial port in services, go to COM ports and add outgoing port (e.g. COM6) like you're still used to :roll:
Add an incoming port too (e.g. COM7) <-- Here's the trick!
Set your GPS apps to use COM6 (the outgoing one)... and here you are! This time it will work, you can turn off GPS and device bluetooth, turn on again and it will connect by itself.
If you want a bit more you can activate GPS panel, set program port to COM8 (then you will have to use this in your apps) and COM6 as hardware port.
Everything works fine now!

hey man, wot a coincidence....i also just read that post which had the dutch explanation.....BUT however, it's not working for me.

toneslee said:
hey man, wot a coincidence....i also just read that post which had the dutch explanation.....BUT however, it's not working for me.
Click to expand...
Click to collapse
I did everything in the list except for creating the incoming port and it still works everytime (I know that's no consellation to you). I wonder if something else you've installed, or the way you installed the app is causing the problem? Is it worth a hard reset and trying the entire install on a clean wizard?
Dox

A friend didn't need the incoming port either. I believe it has something to do with the GPS, as he has a different brand than me.
With mine, before adding the incoming port if I started an app without erasing/redoing the pairing before I would get a notification saying "Navman GPS wants to connect" and asking me to pair. It would keep coming every 10 seconds whatever I did.

BigDamHero, what brand / model of GPS is it?
Maybe we can see if anybody here, or over on pocketgpsworld has been able to make the same combination work and if so, what they had to do to get it to fly...
Dox.

well, tomtom was the very first thing I installed when I got my new vario. it was only after I got tomtom fully working (but still need to re-pair everytime), then I installed a couple of simple Card games.

toneslee said:
well, tomtom was the very first thing I installed when I got my new vario. it was only after I got tomtom fully working (but still need to re-pair everytime), then I installed a couple of simple Card games.
Click to expand...
Click to collapse
A quick glance at pocketgps suggests others are having similar issues. There's a thread here that suggests leaving it a while, and I seem to remember other GPS issue threads saying power up the GPS and let it get a fix before starting TTN. A more detailed probe round the forum will probably show more of the same.
Dox

I've just flashed my Qtek 9100 to a new ROM, (the O2 one), and since then I've been getting this same problem. With my previous ROM everything worked fine. I was able to turn of either my PDA or GPS, and they would always auto-reconnect in a few seconds. Looks to me like something broke during one of the ROM changes. Which ROM versions does everyone with/without this problem have?
By the way, I have a BT77 GPS.

Hey sorry for the total lack of reply. Been snowed under with exams.
Ok I tried most of what you guys said but didn`t work. BT ports aren't available to select as hardware ports.
However I have managed to solve it. The key was to pair the GPS, and create an UNENCRYPTED OUTGOING port. That's all. Previously I had encrypted ports outgoing and incoming. My GPS applet in control pannel is set to none so it,s nothing to do with that.
I don't know what my GPS is. Its unbranded. One of the cheap common ones.
Hope this helps some people with the same problem.
Lewis

iGuidance 3 issues

Well, first off let me say I have just upgraded from iGuidance 2 to iGuidance 3. iG 3 is about 8 MB bigger than iG2 and therefore I had to install it on my mini SD card. It works perfectly fine, loads seems to be just as fast (since maps are stored on the mini SD with either program. Anyway, my problem is basically that the program works great, but when the lady comes on telling me when to turn, lets say in 2 miles...it is REEEEAAAALLLY slow and exhagerated. She goes like, Turn.........left..........in........two........miles...... I recently started overclocking my 8125 to 260 MHz to see if it was a speed issue, but no change as far as the sound goes. Any ideas?

turn off your internet connection and you should be OK
DNO

IGuidance 3
Runs fine for me, at stock speed, program and maps on the mini-SD. Maybe it is the overclocking?
- Tim

I have Iguidance 3.0. Now I need the GPS module.
Which GPS module do you all use? What is the best now? Holux, Globalsat? or some other.
Thanks
[email protected]

i use the Rikaline GPS-6033 Bluetooth from buygpsnow.com its $89
picks up 32 sats works indoors and its fast at cold startup locks on to sats
in under 30 seconds i use tomtom and iguidance 3

Re: IGuidance 3
Tim Fountain said:
Runs fine for me, at stock speed, program and maps on the mini-SD. Maybe it is the overclocking?
- Tim
Click to expand...
Click to collapse
I tried it at stock speeds and overclocked speeds, it still did the same thing. I'll try turning off my ActiveSync with my Exchange later today when I'm going on a small road trip and see if that solves the problem.

jschaff said:
I have Iguidance 3.0. Now I need the GPS module.
Which GPS module do you all use? What is the best now? Holux, Globalsat? or some other.
Thanks
[email protected]
Click to expand...
Click to collapse
I use the Holux GPSlim 360 I think it is. The number may be off though. It's uber small and I just throw it in the center console in my car and use it when necessary. Cold start is about 30-45 seconds.

The Rikaline GPS-6033 does not show to be SirfIII. I thought this is the latest technology to get. Is this a more recent technology or is the SirfIII over blown?

I brought this to the attention of iNavcorp, makers of iGuidance, a few weeks ago. This was their reply:
"Our programmers are currently looking into this issue. In the mean time, while turning off the phone will resolve the issue, based on our knowledge, you should be able to simply disable the gprs (wireless data connection) function on your PPC phone which will also resolve the slow voice issue, but this way you will still have phone access."
I had told them that turning off the phone solves the problem. Anyway, they are aware, and I am hopeful that they will fix this in an upcoming patch.
p.s. DNO's answer was right on...

jschaff said:
The Rikaline GPS-6033 does not show to be SirfIII. I thought this is the latest technology to get. Is this a more recent technology or is the SirfIII over blown?
Click to expand...
Click to collapse
SiRFstarIII is amazing. Don't let anyone tell you otherwise.

I use the Holux GPSlim 360 I think it is. The number may be off though. It's uber small and I just throw it in the center console in my car and use it when necessary. Cold start is about 30-45 seconds.
Click to expand...
Click to collapse
It is the GPSlim 236 and it is a great unit! I love mine.

The voice on mine works great, I could not get it to instal to the SD, I had to install the CAB there, and then run that to install the actual program to the phone. My problem is that the maps haven't been updated with streets that have been made in the last few years, and the shopping POIs arn't that great.
I have a Houlix 268 slim (I Think thats the model), and it randomly loses connection, so I have to power-cycle it and restart IG3, for it to regain connection.
Also every once and a while it does a wierd click sound when I'm slowing down.

mm_thor said:
I brought this to the attention of iNavcorp, makers of iGuidance, a few weeks ago. This was their reply:
"Our programmers are currently looking into this issue. In the mean time, while turning off the phone will resolve the issue, based on our knowledge, you should be able to simply disable the gprs (wireless data connection) function on your PPC phone which will also resolve the slow voice issue, but this way you will still have phone access."
I had told them that turning off the phone solves the problem. Anyway, they are aware, and I am hopeful that they will fix this in an upcoming patch.
p.s. DNO's answer was right on...
Click to expand...
Click to collapse
I did notice this was the issue this weekend. Is there a "quick" way to disable GPRS? I guess i'll keep an eye on iNavcorps website.

Turn it off from the comm manager. Mine works fine while I am using BT for my headset and on the phone talking.

Do iGuidance do maps for Europe? THey seem to have discontinued their european product; if I can get the europe map from v.2.12 will it work with v.3.0?
Cheers.

tom tom 6 + exec

how easy is it to install tomtom 6 on a O2 EXEC and get it working with a bluetooth gps reciver?
Are there any/many cracked coppies of this floating arround?
Cheers
Oblique

oblique said:
how easy is it to install tomtom 6 on a O2 EXEC and get it working with a bluetooth gps reciver?
Are there any/many cracked coppies of this floating arround?
Cheers
Oblique
Click to expand...
Click to collapse
Here's an idea: try not stealing.

i don't nomaly steal but as i don't know how stable tomtom works on my phone or how stable bluetooth gps works on my phone i am reluctant to spend 80quid to find out.

works very well, you have to config your exec to get TOMTOM to work with bluetooth gps( you can find that on here somewhere).

It works fine, but slower than on a QVGA screen device.
I have used v5 and v6 on AKU 2, 3, and now Crossbow ROMs, it works fine on the Universal, so you can buy it without worrying.

jowett69 said:
works very well, you have to config your exec to get TOMTOM to work with bluetooth gps( you can find that on here somewhere).
Click to expand...
Click to collapse
You don't actually have to config anything if you have the TomTom GPS, it turns on BT itself, and finds it.
If you have a non TomTom BT GPS, simply pair it, and select an outgoing COM port, then when you fire up TomTom, tell it that it's a BT GPS on whatever port you chose.
All very easy.

cool, that is the kind of information that i was looking for, does anyone here use the live trafic update service? does it work well and divert you automaticly and how much does it cost to subscribe?
cheers

If I can remember, you and get 1 free month to try. Traffic is not always update!!!!!

It's good if there's a large incident, but in my experience you usually get stuck in things before they hit your device, and you see the road signs on motorways and things warning you anyway.
I stopped the subscripton, and just reroute myself if I see warnings, or hear something on the radio.

I am using TomTom 6 on my Exec now.
Previously used Navigon MN|5 which required *LOTS* of memory, so TomTom was a nice refreshment with its 7-9 MB memory trace.
Had problems setting up Bluetooth receiver. It wasn't showing up in the port list when I selected Bluetooth one. What I did was: added an incoming serial port, run TomTom and set port to this one (did not work yet!) then closed it and removed the port; after that TomTom just worked straight away At this point, an attempt to change port led to inability to get out of port selection, and you're buggered again. I'm sure that's some glitch, but I solved it anyway. May be there's a neater way of doing this.
But the software itself was good and stable, does what's on the tin, copy a directory to your card and you get Full Postcode navigation (very useful when finding businesses and not residential homes), and POI Warning function is built in now -- a *major* plus, never really got time to make POIWarner work properly. Tunnel mode -- progressive marker movement when lost GPS signal in a tunnel -- and that won my heart.
I do understand people's need to try BEFORE you buy, not after your money is tied up with some dud product and you get no refund. Go Trial, go.
Well in this case I'm pleased with TomTom 6 and its services. You can easily get a camera database each month from the Net and probably can live without Traffic service, but for me £33 a year doesn't seem too big a dent in my wallet - compared to £170-200 TMC receivers currently available on the market.

AlanJC said:
It works fine, but slower than on a QVGA screen device.
I have used v5 and v6 on AKU 2, 3, and now Crossbow ROMs, it works fine on the Universal, so you can buy it without worrying.
Click to expand...
Click to collapse
AlanJC: Have you tried TT6 under WM6 and did all work well? Also, was TT6 happy after you upgraded the ROM - did you have any problems with TT6 thinking the Device Code had changed, thereby needing to re-register the software?

How To get GPS working

can anybody tell me how & what is the step to get the GPS works ?
thanks..

Put some GPS software on your Ameo and point it to COM4.

what are some of the best gps software for ameo?
I would think google maps with the ability to real time track your location would be great. Anyone try that?

Tomtom Navigator 6.
Coz it's free.
Edit - I in no way condone the use of pirated software, and I'll no doubt burn in hell for my sins....

Dopod U1000
Hey!
I have an Dopod U1000, which is the Advantage/X7500/Athena but on the Asian market.
THe first and biggest problem I have is that the GPS is not working. I cannot get a GPS-fix, but I have contact with the actual GPS-unit.
It doesnt matter where I am or for how long I wait - I have never got a fix and once every now and then I get 1 or 2 satellites with very bad connection - but never a fix.
I talked to HTC about this and they didnt know anything about it.
I then, when I asked around, got a weird answer from a company here in Sweden. They guessed that since U1000 is for the Asian market they may somehow have "preprogrammed GPS" information, so that they use Asian satellites. Sounds very strange to me - as far as I know they are not geo-stationary so the satellites goes around and thus there are not specific Asian satellites.
Anyways, anyone know about this issue? Suggestions?
Thx!
Regards
Ted

wagger said:
Hey!
I have an Dopod U1000, which is the Advantage/X7500/Athena but on the Asian market.
THe first and biggest problem I have is that the GPS is not working. I cannot get a GPS-fix, but I have contact with the actual GPS-unit.
It doesnt matter where I am or for how long I wait - I have never got a fix and once every now and then I get 1 or 2 satellites with very bad connection - but never a fix.
I talked to HTC about this and they didnt know anything about it.
I then, when I asked around, got a weird answer from a company here in Sweden. They guessed that since U1000 is for the Asian market they may somehow have "preprogrammed GPS" information, so that they use Asian satellites. Sounds very strange to me - as far as I know they are not geo-stationary so the satellites goes around and thus there are not specific Asian satellites.
Anyways, anyone know about this issue? Suggestions?
Thx!
Regards
Ted
Click to expand...
Click to collapse
i got my DOPOD U1000 from Taiwan, and GPS works great. you need to set the post to COM4, signal is much better then the BT device i got before. It doesn't matter where you buy your device

wagger said:
Hey!
I have an Dopod U1000, which is the Advantage/X7500/Athena but on the Asian market.
THe first and biggest problem I have is that the GPS is not working. I cannot get a GPS-fix, but I have contact with the actual GPS-unit.
It doesnt matter where I am or for how long I wait - I have never got a fix and once every now and then I get 1 or 2 satellites with very bad connection - but never a fix.
I talked to HTC about this and they didnt know anything about it.
I then, when I asked around, got a weird answer from a company here in Sweden. They guessed that since U1000 is for the Asian market they may somehow have "preprogrammed GPS" information, so that they use Asian satellites. Sounds very strange to me - as far as I know they are not geo-stationary so the satellites goes around and thus there are not specific Asian satellites.
Anyways, anyone know about this issue? Suggestions?
Thx!
Regards
Ted
Click to expand...
Click to collapse
the Global Positioning System is global, and should work anywhere on the globe !! apart from in war zones (and near US military bases) where the signal is sometimes deliberately degraded so enemies cant use satellite guided missiles.

wu5262 said:
i got my DOPOD U1000 from Taiwan, and GPS works great. you need to set the post to COM4, signal is much better then the BT device i got before. It doesn't matter where you buy your device
Click to expand...
Click to collapse
should i install any third party software beforehand?

Help
My Device can find the GPS on com 4 but it will not work with Google maps or pocket streets can any one help?
Thanks
Ian

I've got Tom Tom Navigator 5 working (using COM 5), but I've also not managed to get Google Maps working.

GPS is not working with GM
edintao said:
My Device can find the GPS on com 4 but it will not work with Google maps or pocket streets can any one help?
Thanks
Ian
Click to expand...
Click to collapse
This is also a big problem in Germany - it's not possible to get it working with Google Maps. We tried everything (also to disable the GPS-Splitter and use Com5 which helps with some programs, but not with Google Maps).
So we gave up for the moment waiting for an update (maybe Athena, maybe Google).
Teja

alanplum said:
Put some GPS software on your Ameo and point it to COM4.
Click to expand...
Click to collapse
Got mine working in TT6 by doing:
Other NMEA GPS Receiver
GPS Baud Rate: 4800
Com4
Is this what everyone else is doing ?
is the Baud rate correct?
Its quite chuggy/slow compared to tt6 on universal. i.e. 2-3fps as opposed to almost smooth on universal
Also, is it possible to change that tomtom icon thats on the today screen ? its so ugly and blocky - really detracts from the otherwise lovely Ameo screen

Mine is working great. By the way, i'm using MapKing10. When setting the port just select auto and the software should be able to detect the port in use. My unit can lock on into the satellite signal in less then 5s, thats impressive.

Hi
Does anyone know where to get a copy of the aforementioned TT6 for free? I had just bought TT navigator 6 with GB + Western Europe for my Mio A701 about 3 months ago but was gutted to find I couldnt transfer the licence to my new Ameo so i sold the boxed product with the Mio.
Anyone know where I can get one (strictly for "backup" purposes of course).
Cheers

Very easily found on torrent sites.
I won't give a link here as I assume that would be frowned on by the management....

ok, will have a look. not that familiar with all this torrent stuff!
ta

GPS Port
I looked in the registry and I found that com 5 is the official port. Strange enough com 4 and 5 work.

Getting GPS working
I purchased an A701 last week and had one hell of a time tring to get TT6 to work, even though MM worked fine. It appears that some software originally designed for ealier MS does not like Com4. I loaded a program called VisualGPSse, a freedownload, and set that to com 4 and bingo TT6 spang into life. Before using TT now I lauch that small app and it works fine. I,ll try and find the link if Google doen't find it for you.
ps. Does anyone know of an app that will allow me to use hands free, my Mio Rom R65 seems duff in this area.

getting GPS to work
I've installed my vehicle navigation software (copilot live v5) without any problem twice.
But when I tried to instal another GPS-based application called MobileGolfScorer, the system was simply unable to sense any satellite signal. Not only that, the system became extremely slow to the point of freezing up and not responding.
Then, I read about the post that says com5 is the default, so I said to myself may be I should use com5 instead of 4 in my start>setting>GPS.
After changing to com5, my MobileGolfScorer was able to recognise signal although the signal was extremely weak. Also, it was no longer freezing up. I thought that may be I've at least solved the problem and the weak signal may be due to the fact that I was not directly under the open sky.
The new problem is that after changing to com5, my copilot stopped working! When trying to reset GPS within copilot, it just said that I either did not have the GPS connected, or I was having the wrong com selection and/or baud rate. I tried all possible combinations of com and baud rate (including letting it find automatically) but unfortunately the results were the same.
Then I thought to myself may be copilot can only use com4. Since vehicle navigation is a more important application to me, I may have to sacrifice MobileGolfScorer until the problem is resolved. So I went to start>setting>GPS and reverted to com 4.
I then tried to get copilot to work but now it would not. MGS also would not work. So now I have two GPS applications that are not able to sense any signal. I can see the gsm led orange light(GPS) and green light(phone) alternating, which means that the GPS is supposed to be working, althoug the orange light disappears by itself after a while. The thing is, with or without the orange light, the software were not able to sense any GPS signal.
What do all these suggest? Any idea???
Chapter 2 to my story:
Since I'm also experiencing MD lost cluster problems, I had wonder if it could be that some system files used by the copilot program is corruptted. So I decided to hard-reset the unit and reinstall everything from scratch again. The first thing that I did after hard resett was to instal MobileGolfScorer. It did not work when I used com4 and baud rate 4800. Could not detect any GPS signal although the orange light was blinking. Then I installed Copilot live Pocket PC v5. This software has no problem detecting the signal right away. In my mind, it seems to suggest that the reason for copilot to have stopped working could be due to file corruption, while MobileGolfScorer still for some reason could not detect it. What I also failed to understnad is why for a very brief period it did detect very week signal (see chapter 1 above).
My fear: Once I was so confident that com4 and baud rate 4800 solves all problems. Now I'm less sure what is going on. If you're lucky, it works; if you not lucky it does'nt seems to work. You could be doing exactly the same thing entering the same setting but you could get different results. Is it due to file corruption? Why does it get corrupted so easily?
Let's hope some smarter mind could figure this out for us.

Its all about the sucky comport management in windows.
If one app is accessing a com port, no others can.
If windows GPS management is accessing the GPS on com5, then you shouldnt connect to com5 yourself. The whole point of the windows management is that the software port (often port4) it creates is meant to be able to be read by multiple programs.
However, most programs dont seem to like the software port. Eg, googlemaps.
I just turned off the MS GPS management and only use apps that directly attatch to com5, and only one app at a time.

GPS device

Hi
I just bought an GPS-Mouse, in order to make TOMTOM usefull.
It worked a couple of days ago, but TOMTOM can't find the GPS-device now.
Does somebody have some usefull tips for me?
(GPS mouse is a Adapt AD-500 GPS Bluetooth receiver)
Cheers

I only use holux, but try restarting phone that usually helps

xboxhaxorz said:
I only use holux, but try restarting phone that usually helps
Click to expand...
Click to collapse
Yup same here, Holux M-1200 with iGo MyWay software. But are you sure you set up a secure connection with the bluetooth and set it as a com port 6 or 7 with the correct baud rate? Did you follow everything step by step in your manual for the tomtom?

Well, I tried to follow the manual, but it didn't really help me. There was very little information in the manual, and the information in it was not very clear. The fact is, that it worked a couple of days ago, and now I cannot connect anymore...

I have a motorola BT GPS, supposedly motorola is rock-solid, but I've had troubles with it at times. Rebooting the phone would work occasionally, turning off the GPS would work occasionally, turning off both would work occasionally, if you get the picture, no ONE thing did it each time.
Recently, I found Franson GPSGate (the full version) This keeps a good connection with the bluetooth GPS better than it ever has been before, even when walking away from and then back to the gps device. It also generates a comport that multiple GPS programs can use at once. Very handy little program.
Hope it helps someone.

itrek bluetooth for me....
Do you know about the settings, External GPS icon on the Wing? Go in there and make sure you've got com port set i have mine at program port 6 which is where most gps like to sit for some reason but if it's not working for you play with that setting unfortunately it's trial and error but play with it. I don't know what you'd need "hardware port" for but since you're using a mouse and not a bluetooth unit can't hurt to play with that too, and in the last screen be sure you've got "manage automatically" checked, or maybe you need to uncheck it. All stuff to play with. Did you put any software on lately that could have hosed something? Did you try reloading tom tom? See if you can find one of those freeware utilities that talk to the gps unit and see if it can find it.

This device doesnt have a internal gps correct ? I always thought it didnt but I see some people talking as if it does. Then again, you all wouldnt be buying externals if that was the case.