I think it started after I updated to the new Samsung UI.
So I plug in the tablet to the usb (it sees it as the mpt device in 'mobile devices' section of my computer), navigate to the folder. When I am dragging files over to copy it gives the warning, that I won't be able to play back it (which is wrong). Than it thinks for a moment and states, that cannot copy file due to device was not recognized ot something.
I've installed the latest version of Kies for Win7, so all latest USB drivers are installed.
And anyway, how to turn off this crapy MPT connection? I want to use the tablet as a USB flash.
I'm not sure what causing that, but it might be worth reinstalling the drivers. If you start Kies, there's an option to do that.
No, it does not help. I reinstalled the driver via Kies and also manually.
I can copy back and forth small files, but as soon as I wanto to copy a 400Mb movie - it just looses connection with device.
the movie has to be no more than 3gig, either resize the movie with handrake or split the movie in half with HJsplit 3.0 and then transfer it, i would suggest using wifi explorer pro to transfer, works %100
Hi,
I’m running into an odd problem.
I have a Google Nexus 7 Tablet. I’ve unlocked and rooted it with the Toolkit. I’m attaching it via USB on a Windows 7, 64 bit system. I’ve installed the PDANet drivers.
I’ve made a back up of my tablet using Titanium Backup. Within the Titanium Backup directory are many small files, that I’d like to copy back onto my desktop for safe keeping.
However every time I copy the directory over to my PC using Windows Explorer, only a fraction of files get copied, I’d say about 20%. I’ve tried it several times, but, can’t seem to get it to do a complete copy. I’ve tried selecting the entire directory and the all the files (select all) without success.
When you plug in the micro USB cable to your tablet, does it automatically go into mass storage mode (though I have selected Mass Storage mode as my option).
I’m coming from several Samsung devices and I know there are a few ways to enable mass storage mode on them, and at a minimum, you have to choose to mount the SD card. Is there something similar with Asus devices?
What am I missing?
Thanks!
I rarely send files via the USB port... normally just use the wifi connection. Just sent all the TI backup files via AndFTP to a server over WiFi and it only a little more than 5 minutes.
I then for the first time, hooked up the N7 to my USB to transfer the files to my notebook.
Didn't make any changes.
Created a new directory on my Notebook (Win7Pro) and then opened the drive on the N7, found the TitaniumBackup directory and selected all the file (not the directory holding them).
Took about 5 mins to move the files which was about the same as the Wifi transfer.
Not errors, and all the files got there.
Not sure if that helps you...
Oh. the N7 is rooted with TWRP recovery on it but otherwise Stock.
BTW.. this morning I tried this app which is a sync app between my workstation at home and the Droid. Worked good enough I upgraded and now have a number of manual syncs setup (droid to computer)
https://play.google.com/store/apps/details?id=com.jrtstudio.SyncFolders
krelvinaz said:
....
Didn't make any changes.
...
Not errors, and all the files got there.
Oh. the N7 is rooted with TWRP recovery on it but otherwise Stock.
Click to expand...
Click to collapse
krelvinaz said:
BTW.. this morning I tried this app which is a sync app between my workstation at home and the Droid. Worked good enough I upgraded and now have a number of manual syncs setup (droid to computer)
https://play.google.com/store/apps/details?id=com.jrtstudio.SyncFolders
Click to expand...
Click to collapse
Hi krelvinaz,
Thanks for taking the time to test that for me. I did exactly the same procedure as you. I'll play with it some more and see if it was just a bad driver install or something. Perhaps I'll try it on my laptop at work...
And thanks very much for the link... that app does look promising indeed. I really appreciate that it doesn't sync with the cloud, but with my pc. That's great.
Thanks again for your help!
Update:
Ok, well I tried to copy the same files on my work laptop, which is running XP, and without any additional drivers, and it stopped at exactly the same place, at one particular file.
I then deleted that one backup file, and tried to copy the directly again, and it worked. I then tried again on my Windows 7, 64 bit desktop and it too was successful!
I guess that file was corrupted or something.
I'm glad I figured it out, and thanks again krelvinaz.
I got my N7 today. Just plugged in USB to my computer and copied my "backup-apps" folder and my MP3 folder from my phone. Moved very fast, now I have about 150 .apk's I can install if I have recognition problems with the Play store, and 2000 songs.... using up my "16" gb fast... about time to root and add stickmount.
Whenever I plug in my S4, it seems fine. Drivers are installed correctly since I rooted fine and that also means the USB is fine.
The problem arises when I try to copy any file to my phone. It plugs in, allows me to switch it between Camera (PTP) and Media Device (MTP). I have tried turning USB Debugging on and off when transferring files and on both Camera and Media Device.
When I copy a device into any folder or the main card or phone directory, it starts copying, the green bar stops and then after a second the following message comes up:
"This device has either stopped responding or has been disconnected."
It allows me to Stop copying or Skip this file... which is the only file.
Any ideas on what is causing this and what I could do to try and fix it?
Use a different cable or usb port. Something is causing the phone to stop communicating with the computer. Also, make sure you don't have any power saving features enabled that may be turning of power to the usb port in Windows.
I've tried that and it still has the same issue.
Just unrooted and performed a factory reset. My phone is totally stock and doesn't allow me to copy any files onto it.
Does anyone have any idea?
[SOLVED]
Solved this by taking out my SD card, restarting my phone, putting the SD card back in and formatting it.
You can format by going into Settings > More > Storage > (Scroll to bottom) Format SD Card
That's right, it was not easy to find... Thanks!
cruise350 said:
Use a different cable or usb port. Something is causing the phone to stop communicating with the computer. Also, make sure you don't have any power saving features enabled that may be turning of power to the usb port in Windows.
Click to expand...
Click to collapse
Effectively, you have to turn off the ENERGIE ECO on your Tablet.
another way to see that the SDCARD is not responding, is to browse inside the Folders. They seems to be empty.
regards:good:
connection problem solved
FeversMirrors said:
Whenever I plug in my S4, it seems fine. Drivers are installed correctly since I rooted fine and that also means the USB is fine.
The problem arises when I try to copy any file to my phone. It plugs in, allows me to switch it between Camera (PTP) and Media Device (MTP). I have tried turning USB Debugging on and off when transferring files and on both Camera and Media Device.
When I copy a device into any folder or the main card or phone directory, it starts copying, the green bar stops and then after a second the following message comes up:
"This device has either stopped responding or has been disconnected."
It allows me to Stop copying or Skip this file... which is the only file.
Any ideas on what is causing this and what I could do to try and fix it?
Click to expand...
Click to collapse
i was getting the same problem,so i uninstalled the driver and then connected the mobile .
secondly i also have installed wondershare mogile go on my mobile and pc , so when i connected my mobile to pc after uninstalling the driver the mobile go pop up came up for usb installation and it asked for installing the usb driver for mobile go ,it asked me to swithonn the usb debugging ,and it installed the driver then it just worked fine .
may be it was a mobile go problem (any software) or Driver Problem but it helped so no need to format,reset or remove your card . just try this and tell wat helped.thank you.
This is a Driver Problem.
All I had to do was plug the usb cable into the usb port that i installed the device to. My PC won't read the phone right from any other USB port. I hope this helps
Im not sure if this thread is too old or not, just wanted to give my imput on the matter, so I ran into this issue just today but i had never had it before, turns out it was the file, I did everything I could think of : played around again with the USB port selective suspend feature and it wasnt that, plugged into other USP ports, want that, untill I tried copying something else and BINGO, the file got copied, so I tried with a folder full of different files like word, excell APK files etc...and they all went through fine, so next i tried a lange file a movie and it went though fine. the file in question was a nighlyROM apparently it was corrupt, or didnt download properly. So my suggestion is to check if you can copy or transfer other files.:good:
it didn't work for me
you have to fix permissions
it happened to me on my gt-n7100 (Galaxy Note II ) with android 4.4.2, you have to install TWRP (Team Win Recovery Project see how then reboot into recovery select ''advanced'' hen ''Fix Permissions'' that worked for me
you can use chmod to fix this it works too
hudtwalcker said:
Im not sure if this thread is too old or not, just wanted to give my imput on the matter, so I ran into this issue just today but i had never had it before, turns out it was the file, I did everything I could think of : played around again with the USB port selective suspend feature and it wasnt that, plugged into other USP ports, want that, untill I tried copying something else and BINGO, the file got copied, so I tried with a folder full of different files like word, excell APK files etc...and they all went through fine, so next i tried a lange file a movie and it went though fine. the file in question was a nighlyROM apparently it was corrupt, or didnt download properly. So my suggestion is to check if you can copy or transfer other files.:good:
Click to expand...
Click to collapse
:good::good::good:thanks a lot bruh, here i was thinkin i did somethin wrong on my phone but it was the file that had the problem, and the reason for the error
midoucaca said:
it happened to me on my gt-n7100 (Galaxy Note II ) with android 4.4.2, you have to install TWRP (Team Win Recovery Project see how then reboot into recovery select ''advanced'' hen ''Fix Permissions'' that worked for me
you can use chmod to fix this it works too
Click to expand...
Click to collapse
!!!
This did it for me. I already had TWRP installed and after quickly doing this I was able to copy to/from my SD card. It also fixed the problems I was having copying/moving things from internal storage to the SD card using ES.
FYI, It also caused XPosed to break until I rebooted again.
THANKS SO MUCH!
Doing this now, thanks so much! Wonder why that happens.
Didn't work unfortunately. Other files seem to be moving over just fine. All except this 1.6GB file (checked space, that's not the issue), where I cannot send either to Internal or SD Card. Maybe it's a corrupt file?
JJ
eNonsense said:
!!!
This did it for me. I already had TWRP installed and after quickly doing this I was able to copy to/from my SD card. It also fixed the problems I was having copying/moving things from internal storage to the SD card using ES.
FYI, It also caused XPosed to break until I rebooted again.
THANKS SO MUCH!
Click to expand...
Click to collapse
hudtwalcker said:
Im not sure if this thread is too old or not, just wanted to give my imput on the matter, so I ran into this issue just today but i had never had it before, turns out it was the file, I did everything I could think of : played around again with the USB port selective suspend feature and it wasnt that, plugged into other USP ports, want that, untill I tried copying something else and BINGO, the file got copied, so I tried with a folder full of different files like word, excell APK files etc...and they all went through fine, so next i tried a lange file a movie and it went though fine. the file in question was a nighlyROM apparently it was corrupt, or didnt download properly. So my suggestion is to check if you can copy or transfer other files.:good:
Click to expand...
Click to collapse
Yeah! Exactly! I was trying to copy an unfinished movie that was still downloading in torrent. It was stuck at 98.8% and it was playing fine in my computer. Only this file was not copying in my phone. and anyways i couldn't get it to my phone because it never downloaded 100% due to lack of peers, and i could copy other files. This means MTP mode does not allow to copy corrupt or half files and there is no mass transfer mode now a days...
---------- Post added at 08:53 PM ---------- Previous post was at 08:52 PM ----------
I was able to copy the unfinished file by mounting External SD in TWRP btw....
FeversMirrors said:
Whenever I plug in my S4, it seems fine. Drivers are installed correctly since I rooted fine and that also means the USB is fine.
The problem arises when I try to copy any file to my phone. It plugs in, allows me to switch it between Camera (PTP) and Media Device (MTP). I have tried turning USB Debugging on and off when transferring files and on both Camera and Media Device.
When I copy a device into any folder or the main card or phone directory, it starts copying, the green bar stops and then after a second the following message comes up:
"This device has either stopped responding or has been disconnected."
It allows me to Stop copying or Skip this file... which is the only file.
Any ideas on what is causing this and what I could do to try and fix it?
Click to expand...
Click to collapse
I've changed the file type which was a (.zip) to a (.mp3) and transferred the file. It worked.
hudtwalcker said:
Im not sure if this thread is too old or not, just wanted to give my imput on the matter, so I ran into this issue just today but i had never had it before, turns out it was the file, I did everything I could think of : played around again with the USB port selective suspend feature and it wasnt that, plugged into other USP ports, want that, untill I tried copying something else and BINGO, the file got copied, so I tried with a folder full of different files like word, excell APK files etc...and they all went through fine, so next i tried a lange file a movie and it went though fine. the file in question was a nighlyROM apparently it was corrupt, or didnt download properly. So my suggestion is to check if you can copy or transfer other files.:good:
Click to expand...
Click to collapse
This is the answer to this thread!
Guys this is dumb but instead of moving the file that wasn't working onto my SD card, I just moved it to my phone and it worked the first time.
Another fix - go to usb options, set to use as USB 3.0 device
Since this is the first thread that seems to come up when I googled the issue, I'll post the fix here...
though I'm on a Galaxy S5, not the S4. I'm guessing it's the same deal.
When I plugged in with USB and tried to copy a 1.2 gig file, it gave me the error message, though many large files had worked in the past.
I tried a reboot, pulling the SD card, and making sure my USB hubs didn't have the "let windows shut this off to save power" option checked.
So I tried pressing the "Connected as a media device via USB" notification when I slide the notification bar down. There are 3 options, MTP, PTP, or USB 3.0.
I changed to USB 3.0 and the file copied fine, and much faster too, about 1.5 or 2 minutes for 1.2 gigs.
This actually works.... - Raj
Hello guys, i've got some problem with file transfer both in pc to op5 and op5 to pc with USB, i don't know why but apparently the problem affect only medium to big files. I can transfer little files like jpg, while i have some problem with mp3, sometime work sometime not, if i insist generally work. If i try with huge files like the OTA now that i'm trying to upgrade the oxygen is not working at all. I suppose the drivers are properly installed since i can open the folders inside pc. Obviously the debug usb is active, i tryed to enable mtp in developer option (is normal that there isn't any mtp selection in the four transfer available? even if enabled mtp i still see "recharge" "file transfer" "photo transfer ptp" "midi"). I usually select file transfer, i don't even know what MIDI is and ptp is only about photos. The phone is rooted with the last official twrp and last magisk, the os is OOS 4.5.8. and is still encrypted. PC is with windows 10
edit: i can't even copy/paste those big files from a folder inside the phone to another one always in the phone.
Try using a USB 2.0 port
rickysidhu_ said:
Try using a USB 2.0 port
Click to expand...
Click to collapse
omg thank you so much, i'm such a noob. i thought all pc port usb were the same and apparently are not. I tried one on the back and it work fine. A minor problem remained tho, i still can't move stuff from folder to folder inside the phone but whatever..i can bring them out and in again in the folder i want.
vanzant83 said:
omg thank you so much, i'm such a noob. i thought all pc port usb were the same and apparently are not. I tried one on the back and it work fine. A minor problem remained tho, i still can't move stuff from folder to folder inside the phone but whatever..i can bring them out and in again in the folder i want.
Click to expand...
Click to collapse
Might be a long shot but try doing a simple restart of your phone and computer and see if that helps