Anyone got it?
Cingular SMT5600 = FUBARed
Hate to resurrect an old thread, but does anyone have or know where to get the full original Cingular SMT5600 ROM? I had loaded WM 6.1 a while back and all was well until I went to hard reset it to give to one of my brothers; it went to the bootloader screen and stayed there. I thought it was completely bricked until I found a full T-Mobile (German) ROM...loaded that up, got it unbricked, and was able to reload the WWE WM 6.1 again, but without a Cingular radio, the phone is still useless (though unbricked).
I've Googled my butt off, but keep running into dead ends..can anyone help?
Related
Well this is the first time I've been unlucky for once. I've just finished cooking up some Rom for my ATT Siemens SX56. I was using the WM2003SE upgrading from PPC2002. I have a feeling that I did something wrong here and I'm guessing that I can't upgrade from PPC2002 and only WM2003? Well I'm not quite sure since I'm new to this. I successfully always upgraded the rom until now. After powering up, it started hanging at the startup logo with the version of the radio stack I think.
G1.3.3
UA.33
3.04
I've tried using ActiveSync and of course it didn't work. The cradle or A.S. did not recognize the device. Tried using XDATool, none. Is there anyway I could go around the ActiveSync?
Use sd card method for flashing.
tried that and it didn't work. I tried almost any methods out there. I tired upgrading from the original ATT Rom PPC2002 to the Special Edition 1.2 Rom and it still didnt work. What's odd is... I can't get my WM2003 to work anymore! When I first started upgrading the rom, I upgraded using SE 1.2, then downgrade to the original ATT rom back to the WM2003 which actually worked fine until I got piss at the radio stack and downgrade back to the PPC2002 but once I tried upgrading to WM2003SE, it didnt work at all which brought me to downgrade back to PPC2002 again and tried upgrading to WM2003 (ATT Version) which still didn't worked. I've tried upgrading the radio stack 6.24 and 6.25 and radio stack that would be compatible for the SX56 still didnt work. Even downgrading my bootloader from 5.22 to 5.15, it still didn't work. It's really odd... Can ANYONE help me?
I have similar problem, I have Qtek 1010 and I can put original rom on only (2002). I have had 2003 on there before and it worked fine but I have tried everything and nothing seems to work, all the 2003 and 2003se rom will not go past the boot screen.
Is your phone working at all.
My phone is perfectly fine, I'm just trying anyway to resolve that booting problem and so far, I'm getting no good results out of it... This is totally driving me nuts!
I tried neally every rom and I can't get any to work on my Qtek except the original 2002 Carrier device Rom...... I don't understand why we could both upgrade before with no worries and now it just will not work....
PLEASE HELP SOMEONE.....
THANKS
Well, so far I tried another rom, an older one and I still didn't get it to work... SD Flashing... The normal method with ActiveSys, it still didn't work. There has to be a reason to why this isn't working. Does ANYONE out there know whats going on here?!
I made a full backup using aWizard, and upgraded to the QTEK test rom 2.8.7 or whatever, and it ran good and when I went to restore my Cingular 8125 backup it still retains the old TEST boot logo screen. I am wondering if any1 has the cingular logo screen, cause I have looked on the FTP and did not see to be able to find it. Thanks so much!
Ok I got it to revert finalley, but now I am confused as how to Replace my extended ROM back. I have it backed uo but I see no option in aWizard to write teh extended rom I tried that APA_ext_rom_unlock.exe and it did not give me the success popup. I can see the extended ROM but I cannot edit it, any ideas any1 ? im using a 8125.
i have an mda where i cleared the memory on the phone and then i took out the battery to change the sim card before before everything loaded back up, i tried flashing it with a new t-mobile rom but it hangs up at the t-mobile screen is there anything that i can do or is the phone now a brick, i can get into the boot loader sceen without any proble
Thanks in advance
try to flash an official rom first. Also is your phone unlocked?
Yes the phone is unlocked and what rom are you talking about when you say official.
Thanks in advance
any official shipped rom from a provider.. something that wasnt cooked..
i did already from t-mo
crap, i must be more tired than i thought, i cant believe i missed that, and i read your initial post twice.. is your phone G3 or G4? and when you go to the bootloader what is your IPL/SPL
Hey everyone, I have a Audiovox branded Cingular SMT5600 phone with the original factory ROM on it. Today I turned it on and it is just sitting with the three color bars and is stuck. Is there anyone out there that has a working link to the original Cingular ROM for 2003SE that can with the phone? I want to restore it to factory. i have never flashed it or unlocked it, so I am afraid if I just try and load a WM5 or WM6 ROM on it as it is not unlocked I will be in a worse situation so that is why I want to load the factory original. Any help would be great!!!
i found the .BN file in the forum's on this site, thanks! Anyone tell me how to flash the backup rom in the .BIN format to my phone?
never mind, I figured out the Camera button was stuck on my phone. A simple disassembly and adjustment of the housing fixed it!! Thanks to the forums!
First post.. so here goes
I picked up a few HTC's to use as ppc for toys.
my 8125 I reflashed - no probs.. you guys are on the ball and know your stuff.
I got this ppc6800. When I turned it on.. it was flashed back to like 2007.. had no carrier splash screen, and a US Cell radio 1.40.
The coms manager didn't show that there was a wifi, but the switch on the side caused the icon to show up so I figured it was disabled or something.
I unlocked it with titanunlocker, and have flashed it with several 6.1 roms here. everything i do..it hangs. sprint, alltell, whatever..
The only way I can get it to work, is to use the UCC_BIGSTORAGE stock rom. I currently have RUU_TITAN_ALLTEL_WWE_2.14.671.3_1.40.00_Altel_0816_NV132_Ship flashed to it. but no wifi..Not even it I install a carrier cab.. It's not even broadcasting as my router won't even pick it up...
I am wondering if the WIFI is a part of the radio or something...
I have seen others asking the same questions... and they are mostly unanswered... so it's back to searching for a solution.
I am reading up some more...there is no A-key.. and I cant get the proper MSLNumber to change any settings in the EPST.
Can anyone point my in a direction? I have spent days messing with it.. but I am determined.
did something stupid and locked it up.. read some and did the titan_SPL_2.40-olipro executible to get it out of 1.06 bootloader or whatever it was..
got it back to 2.17 rom 1.40 radio.
still cant get a custom rom to flash
its got wm 6 pro... won't it take 6.1? is that why?
tried carrier cabs..nadda
am I that much a noob?
and hornet 5 looks cool on my wizard..lol
edit*
is there a reason why when I try to flash something other than a 'stock' rom.. it won't boot past the first splash screen?