Related
Finnish Aali Alikoski, Academic Developer Evangelist of Microsoft Finland, has just released a highly useful application, SMS Notifier, along with its source code.
The application offers some really nice and, up to now, to my knowledge, on the Pocket PC Phone Edition platform, unprecedenced functionality: it waits for unanswered incoming calls and, depending on the configuration settings, it either sends an SMS message to the caller (with configurable contents), possibly containing also the end time of current appointment (this is also configurable) or adds an item to the system-level Windows Mobile calendar (containing the caller info).
The latter functionality is nothing new – you can check the caller's identity and the call date/time in any low-end mobile phone. The former – that is, the SMS feedback –, however, is really long-awaited!
Downloading and Installation
You can download the application here. Transfer the CAB file to your PDA and execute it there.
If, after installing and upon starting SMS Notifier, you're presented this error message, make sure you download and install .NET CF 2.0 from Microsoft. Make sure you install it in the main memory. Also note that, as the application heavily relies on the new, connectivity/database-related libraries of .NET CF2, it's not very easy to port it to run under the earlier Compact Framework library. (For CAB lovers, you will only need c:\Program Files\ Microsoft.NET\SDK\CompactFramework\ v2.0\WindowsCE\wce500\armv4i\NETCFv2.wm.armv4i.cab ; you can also download it from here (to avoid having to download the 24 Mbyte-long MSI installer).
Configuration
On the main set-up screen, there're some checkboxes in AND relationship. The first one, Send SMS to unanswered callers, instructs the application to send an SMS to everybody that tries to call you but his or her calls remain unanswered. Using (not disabling) the second two checkboxes, however, you may make the application not send a SMS to anyone that calls you, just to the ones that call you during an active/busy appointment.
The checkbox/text input area at the bottom makes it possible to report the end of the current appointment so that he or she can know when you are reachable again.
The Calendar tab contains only one checbox, which instructs the application to enter all the incoming calls into Calendar.
Note that the configuration settings are not correctly saved/restored, as the author also points out.
Usage
To use the application, just start and configure it to your liking. Do not click the Quit button – then, it won't send your callers any SMS. Just let it run. You can, of course, suspend the PDA while you do so and also minimize the application. This also means you can safely start it from \Windows\Startup (just like the other highly recommended application, PMRecorder – please see this article on it if interested) – if it's running in the background, it'll safely catch all unanswered calls.
Other stuff
I also recommend the author's blog here. Don't be taken aback of some of the material's being in Finnish: there's nothing really interesting in them for non-Finns (the Finnish blog posts are only about local, Finnish meetings, conferences). Unfortunately, some of the other Finnish .NET bloggers (see the links in the lower left of the page) post exclusively in Finnish, even highly technical stuff that would be interesting for non-Finnish speakers too. (Feel free to ask me in my blog for a public translation for some of them if really interested.)
thanx man .. jus tried it . this application actually works .rockinnn
I can't seem to be able to install the .net Framework 2.o on my new T-Mobile MDA - USA (Wizard)
I get the same error from .cab install or activesynch install:
"Installation error. Stop all applications and processes, maximize all available storage space, and run installation again. Support info:4"
Any suggestions?
oops
PhoneGuy said:
I can't seem to be able to install the .net Framework 2.o on my new T-Mobile MDA - USA (Wizard)
I get the same error from .cab install or activesynch install:
"Installation error. Stop all applications and processes, maximize all available storage space, and run installation again. Support info:4"
Any suggestions?
Click to expand...
Click to collapse
Did you try to install it in the main storage or the storage card? Only install it in the main storage.
Yeah, the options were "Device" or "Storage Card".
I tried Devicce but no luck...
PhoneGuy said:
Yeah, the options were "Device" or "Storage Card".
I tried Devicce but no luck...
Click to expand...
Click to collapse
I've encountered the same when I first tried to install it on a storage card. Then, subsequent installs to the main memory didn't succeed either. A hard reset helped.
I have installed it and it seems to work well. My only concern is that it seems to use the notification application of the phone rather than the call list of the phone. The reason I say this is because it puts a calendar entry in when I miss a call then adds another entry when I check the notification of missed calls.
is this what is supposed to happen? would it send 2 text messages in this case (when the call comes in and when I check the notification that the call did come in)?
thanks,
Edwin
also, it seems if I am on the phone when I miss a call it uses the name of the person I was on the phone with and not the person I missed.
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
ethorn said:
is this what is supposed to happen? would it send 2 text messages in this case (when the call comes in and when I check the notification that the call did come in)?
Click to expand...
Click to collapse
That's what happens for me... I stopped using it because of the duplicated sms's...
meschle said:
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
Click to expand...
Click to collapse
Tried it. Keep getting "Cound not find resource assembly" error.
Strange works sweet for me.
this is the link I used
http://www.freewareppc.com/communication/callassistant.shtml
meschle said:
Ruttensoft also has a similar program call minder - works well but not as many features as above program but you don't need NET thing - hate those addons
Click to expand...
Click to collapse
after using the Ruttensoft on my Qtek, i can no longer creat SMS, when I click on new, only a while screen appear, cannot input both phone number and Text.... did anyone meet the same ???
meschle said:
Strange works sweet for me.
this is the link I used
http://www.freewareppc.com/communication/callassistant.shtml
Click to expand...
Click to collapse
No it didn't... you didn't use this program. we are trying to give feedback to the author of this program which has so much more potential than the limited software you used.
No sms works for me even when activated. my qtek rom is 1.6.7.1 maybe that's the diff. Sorry ethorn could start a new thread if you like but may help some people if the other prog don't work for them.
Hi
I have a XDA 2i & a XDA Mini S and use a program called Do Not Disturb by Jguisoft, a very small footprint and easily configurable
no I am all for putting ideas of other products, but the way you worded it sounded like this program that Menneisyys worked on worked on your phone and that the version of his program you used was at another link.... my problem is that neither are true. Software Guru did things right and just introduced another alternative.
thanks guys
Software Guru said:
Hi
I have a XDA 2i & a XDA Mini S and use a program called Do Not Disturb by Jguisoft, a very small footprint and easily configurable
Click to expand...
Click to collapse
Can you provide a link? Did a google and no results found.
Cannot download the SMSNotifierSetup cab
Can someone please post this as i cannot seem to download it.
thanks
I have been searching the web for years trying to find the solution to what I would consider is a very simple requirement:
From Outlook on the PC, right click on a contact and dial to a connected Pocket PC via Activesync.
Now, either I am alone in this world, or my search capabilities are flawed. This is a function/capability I used to have with my old Sony-Ericsson & I am missing it badly - yes, I know there is a Powertool that provides you with a "window" to your PPC, but I have found that this is somewhat flakey, doesnt like Landscape mode and frequenly freezes the PPC.
Further, I have enhanced my Access application to perform the dialup via the CPROG.exe, what I am after is the same or similar functionality direct from Outlook... please help!
Is there anyone out there that can help me?
looking for the same
it seems we both live in the same world
Come on guys, are you really telling me there isn't anything out there at all?
err so remind me why one would want to do this other than to write some annoying dialer program?
OK, rather simple, really:
Working from Desktop PC, with PPC connected via ActiveSync and sitting in a cradle - by definition, this makes it a pain to access the PPC.
Current Scenario:
1. PC has Outlook open, search for a contact that you wish to converse with
2. Open Contact
3. Look at number
4. Lean over desk, usually spilling coffee, or unintentionally moving to another website
5. Try to use Stylus to dial number (or use Intellidialer to access the same contact you have in Outlook)
6. Make call
7. Hope you have put in the right number
8. Call goes to voicemail, throw phone against wall
All in all, a rather cumbersome scenario.
Preferred Scenario:
1. PC has Outlook open, search for a contact that you wish to converse with
2. Open Contact, or right click on Contact
3. Select number to dial
4. "Magical programme" sends dial request to PPC
5. Make call
6. Call answered, sale made, kids go to expensive Private School and Wife loves you forever
Makes sense now?
yep so get one of those programs to control your phone from the desktop?
sure its not what you really want to do but it will do the job
st3v3 said:
yep so get one of those programs to control your phone from the desktop?
sure its not what you really want to do but it will do the job
Click to expand...
Click to collapse
Did you ever read his first post?
yeah for about 4 or 5 seconds, gave pity and responded for the simple fact no one else did and thought i would show some interest.
at least some of us make an attempt eh helterskelter
Thanks for your pity, but I would prefer to know what, if anything, is out there. Obviously, I was mistaken in believing this was the font of all wisdom and exciting development in the PPC world. I truly cant believe that nobody has thought to put this together. Funnily enough, there is one that does this via Bluetooth, but as the XDA Mini wont allow multiple Bluetooth connections, I have been "forced" to find out if there is anyone clever enough to make this happen :sigh:
Hi!
I miss this funtion in windows mobile. This is the only reason why I consider to go back to my old Ericsson.
A little bit strange that it works with other software but not with Microsofts own?
Using .net you might be able to write an app (server) that listens on an open port on the PPC for coms from the active sync pc. When a certial string is sent down this port DIAL(123456789) the app calls the dial command in .net framework.
Maby its time to bite the bullet and code it.
Im having to with another app
No need for a PPC app, as you can already do this from the desktop - using:
rapistart.exe "cprog.exe -n -url tel:numbertocall"
from within any ap. I have done this from my Access program, I was looking to see if anyone had done this for Outlook as a plugin for the Desktop, or indeed some form of TSR on the PC that will take a hotkey and use the above for a highlighted number (yes, I know that I am now officially in fairyland).
mlk said:
No need for a PPC app, as you can already do this from the desktop - using:
rapistart.exe "cprog.exe -n -url tel:numbertocall"
from within any ap. I have done this from my Access program, I was looking to see if anyone had done this for Outlook as a plugin for the Desktop, or indeed some form of TSR on the PC that will take a hotkey and use the above for a highlighted number (yes, I know that I am now officially in fairyland).
Click to expand...
Click to collapse
Nope this can then be done using windows scripting host cause its the outlook that you need to automate not he PPC.
See the 3rd item on this page.
http://www.cooperstown.net/tips/outlook-address.html
It should be able to help you out just make a custom toolbar button in outlook to call this piece of code and your away laughing.
EDIT:
Where did you fiind the info on cprog. Is there any way it could help with this
Unfortunately, I cant remember where I found the information on Cprog - only thing I have is the "How to call a number".. tried for some time to find various parameters to no avail... not too sure if this will help with your problem.
OK Guys, I finally bit the bullet - thanks Shaun for the "hint" - and coded a Macro to perform this.
It may be a bit clunky and as a "non-developer" I don't have the requisite nous nor software to distribute this as a plugin. For this reason, I have provided this as completely open (as far as I can tell), so if anyone wants to take this further, I hope I have started you on the track and that you wont forget the initial starter!
For those of you that wish to install - you will need to access your \Documents and Settings\<username>\Application Data\Microsoft\Outlook folder and extract the zipped file. My recommendation is that you save the existing one first, just in case you have written a bunch of Macros - wouldn't want to get any nasty surprises here - remember, Outlook only has one Macro bucket and this file is it!
Once you have installed and either provided your own Digital Certificate, or have an appropriate level Security within Outlook to allow this to run, simply add the Macro "Dial2PPC.Dialit" to a toolbar both in Outlook (that comes up in Contacts preferably) and in the Contact Form itself (use "Customise" as you would in any other Office application to facilitate this).
From here, it is as simple as selecting the Contact from your contact list and clicking on the Macro button you have setup - then follow the instructions, make sure your PPC is connected & Dial away!
Please note that you will need to have installed RapiStart from the Windows Mobile Power Toys and that I make no assertions that this is bug free, so use wisely - although, I am pretty sure I have most of the bugs out.
Again, this is provided open & free, so if you make an enhancement, please share it with the rest of us!
Hope this solves the "issue" for you guys as it has done for me!
DialViaActiveSync
mlk – thanks very much for your macro. I’ve taken the liberty of rewriting quite a bit of it (everything other than the part which communicates with the device, really), and have made it available under the GPL v2.0, in order to preserve its “Free” status.
In terms of changes, as I say, I’ve rewritten most of the back-end functionality. In particular:
1.) Adding items to the listbox – this now only shows fields which have a valid phone number, so there are no empty spaces
2.) Dynamic resizing of the form
3.) Form and “Dial” button captions show the name of the contact
4.) Where a contact has no valid phone number, a dialogue to this effect is shown
5.) You need to select number from the listbox before the “Dial” button is available
6.) You can double-click on a number in the listbox to dial it
7.) General tidy-up of some of the variable names, and removed a couple of unused variables
Installing my version:
I’ve exported the relevant files from the Project, so there is no need to overwrite the existing Project file – just open Visual Basic Editor (Tools / Macro in Outlook) and select “Import” and the browse to the relevant folder.
I'm a lurker rather than a poster on here, but, any questions, please do let me know.
Cheers,
Neil
Administrator
WindowsMobile247.com
[email protected]
Neil,
Champion stuff mate - I have always said it is best to wait for Version 2! Just one question: The ".frx" file, what is that for?
Mark.
It's the binary file for the VB .frm - it's not something you manually import, but it's necessary for the display of the form.
BTW- I've changed the contents of the .zip file for download- realised that I'd left in a line (an extra ResetState call) which stopped the whole thing from working - new version uploaded (same name) should be fine.
Cheers,
Neil
Administrator
WindowsMobile247.com
[email protected]
Thanks for this, maybe should change my mantra to: Wait for V2.1?
P.S. Thanks for coming out of the lurk!
Nah- v2 was fine... if I hadn't been meddling with it...
Managed to put the reset call before the RAPI argument, which, of course, wiped out the phone number it was trying to dial... Stupid, stupid, stupid -embarrassing, but at least easy to fix.
I guess that the next step is to try and implement SMS via ActiveSync - not sure if cprog.exe handles this, though, so it could be rather more complicated...
Hi
(1)
I dont like annoying sound of opening/closing Start menu or choosing a menui item. To avoid it, I have to uncheck "Events (warning, system events)" item in Sounds&Notifications screen. However then I miss sound of warnings and system events I guess. How to disable sound for Start menu only?
(2)
When I ActiveSync with Exchange, ActiveSync keeps synchronizing endlessly. Its status is "Looking for changes", then "Synchronizing" and the same again and again without any limit. I just synchronize emails from Outlook folders. No matter if "DirectPush" or "Synchronize during"="When new items arrive" is turned on/off.
(3)
On the forums, BatteryStatusExt1.04.cab is being distributed. It doesn't work. I wonder what the file actually is. Original BatteryStatus tool has another filename and version as well.
(4)
smsOrganizer needs to activate using code from authors web. If you make a mistake (thats what I PROBABLY did), it will never run, even after reinstalling. Not nice. I can just wonder in what file or regkey the author stores the key:/
(5)
htCustom tool (tested version 1.4 and 1.5) completely not functional, throwing exceptions everywhere.
(6)
Any plugins to see Herald files in FAR manager (preferable) or Total Commander?
(7)
Any idea how to import VCF containing more items (not just one)? Seems Windows and Nokias have this problem. I already splitted one big VCF to 300 small VCFs and wonder how I'm going to import them. Clicking on them will take years..
(8)
My VCFs which Im going to import contain more mobile phones. Windows generally doesnt support it. In the address book, there is no option to add new field like on Symbians. How do you solve this situation? What do you do if you want to store more mobile phones? Of course lot of people have more mobile phones!
(x)
Why you use Rapidshare to store files? Please don't support those ****!
Great phone anyways. I dont care about money and this is the best phone I could find. Nasty size, high stability (wow, no single crash), fast synchronization, freaky keyboard (with sym.txt to be easily altered). Very happy with it
any hints??
Well i got you a hint for the last point (rapidshare):
Use http://www.xirror.com
Uploads all your files to 4 Sharedhoster automatically.
xsign said:
Well i got you a hint for the last point (rapidshare):
Use http://www.xirror.com
Uploads all your files to 4 Sharedhoster automatically.
Click to expand...
Click to collapse
Or: www.putstuff.com
and some xda-dev user made an own host for the xda community. I don´t remember the mirror at the moment. But i will search.
no thanks, I actually DONT want to support ANY of filehosting services. I strictly say NO to making business from sharing files. Use torrents or whatever instead.
any help for other points (except 3 which I found out why)?
more points
what i found negative also is
- alarm can use only WAV files (no chance to wake up)
- M$ formats forced (WMAs everywhere, no details about MP3 songs in Info)
- regurarly, when i type with hw keyboard, arrows stop to work
- sometimes storage card disappears (+ had "StorageCard2" problem)
- low quality loudspeaker, people just cant hear me
- use a program
- use coreplayer
- not true
- not true
- not true
xsign said:
- use a program
- use coreplayer
- not true
- not true
- not true
Click to expand...
Click to collapse
- ok im using a huge slow tool now, just to set the system scheduler...
- no problem
- true, even with remote control from Windows desktop, arrows stop working after some typing
- true, every morning, my scheduled events dont happen because the storage card is missing. but actually i see it's working, even if the drive is not corrupted (also happens sometimes)
- true, very bad speaker and microphone. loudspeaker is screaming and you actually dont hear voice. also people hear twice. also people dont hear you well generally. also, even with quietspeaker, people can hear you properly.
To your first problem I think all you have to do is uncheck screen taps. I had the same problem with activesync also. The problem turned out to be my firewall. Had to turn it off in order for the device to sync even if i set a permission first.
And if your still using WM5 I found this in the wiki:
Improve Sound Quality of Speaker Phone
You might have observed that when you turn on speaker while during a call, the other person has complained of too much disturbance on the line and can hear more of static then your voice. Here's a fix to improve mic sensitivity:
HKLM\Software\HTC\AUDIOGAIN(x)\RECEIVE_UPLINK_VOLUME = CC (DWORD hexadecimal)
HKLM\Software\HTC\AUDIOGAIN(x)\EARPHONE_UPLINK_VOLUME = CC (DWORD hexadecimal)
where (x) = none, 0, 1, 2
You can find most of the reg edits from HTCustom and just do em yourself.
M
Heres the actual e-mail pertaining to the activesync problem. This can also be found on the Microsoft Website.
Good afternoon
We are aware of the HTC P4350 memory card corruption problem Farooq. We believe that Windows Mobile 6 will fix this issue that you are experiencing. We are expecting this update to be available for download through the HTC eClub on our website at the end of July.
With regards to your ActiveSync problem, there are many things which could be causing active sync to not synchronise
with your computer. One possible cause could be your anti-virus software and
your firewall.
To solve firewall issues, please open up your firewall program and navigate to
the exceptions section. Here you can set the firewall to allow certain programs
and ports. You will need to make sure your firewall is set to "allow
exceptions", then in the allowed programs list you will need to have four
programs related to active sync allowed. the filenames are as follows, however
they may be called different names in this list.
wcesmgr.exe
wcescomm.exe
rapimgr.exe
astu.exe
Also you will need to allow the following ports:
Inbound TCP
990
999
5678
5721
26675
Outbound UDP
5679
Once these ports and programs have been added to the exception list, you should
find that Active Sync will now work with your computer. If you are still
experiencing problems, then try disabling your anti-virus software as this can
sometimes conflict with Active Sync. If you still cannot synchronise then
please phone our call centre and one of our agents can troubleshoot your setup
with you in order to solve this issue.
Thank you for your enquiry, Should you have any other problem, please do not hesitate to call us. Your Local number can be found at http://www.europe.htc.com/support/csbyphone.html
Best regards,
Matthew
HTC Europe
[email protected]
http://www.htc.com
Hope that helps.
neptune, thank you very much for your reply. i have fixed most of my issues (they start with √).
(1) of course i have "screen tap" off, but Start menu still beeps loudly!
(2) √ FIXED somehow the problem disappeared - maybe by altering AllowLSP reg value, which was required to route internet from home PC to PPC.
(3) √ FIXED
(4) √ OBSOLETE - i dont care, will not search for some registry key to use the tool
(5) √ OBSOLETE still crashing - will not use the tool. I use ASergOptimize pack instead.
(6) would like to know. I heard TC plugin exists.
(7) √ OBSOLETE: i did it manually. it was really complicated job with lot of hacks, using regexp search/replace and manual import of all contacts one by one. I wish I never change platform again...
(8) √ OBSOLETE: again lot of hacking, I mapped Symbian fields to funny Outlook fields (e.g. "Mobile 2" -> "Car", "Mobile 3" -> "Radio")
(a) √ OBSOLETE I will use some tool. (I hate using separate tool for alarm. Why Windows doesnt have normal one.. I tried Gentimer tool, very slow one, crashing my phone on each event!)
(b) √ OBSOLETE - will use some tool
(c) BIG PROBLEM 1 arrows!!!
(d) BIG PROBLEM 2 morning schedules!!!
(e) wow thanks for this, will try it
overall, transfer from Symbian to Windows is not easy... a lot of work I had to do... however I feel much happier with it.
one note: interestingly, i find WM programs to be very small and take very small memory!
I sometimes had the same problem with the arrow keys on the keyboard.
Maybe you can fix the problem temporary if you switch to the Todayscreen and back again to your application where you type. For me this fixed it most of the time.
Dont know if i only was lucky because i did not got the problem often.
beowulf6 said:
I sometimes had the same problem with the arrow keys on the keyboard.
Maybe you can fix the problem temporary if you switch to the Todayscreen and back again to your application where you type. For me this fixed it most of the time.
Dont know if i only was lucky because i did not got the problem often.
Click to expand...
Click to collapse
I get this problem very often, basically when I type any SMS and that's not acceptable.. It can happen several times when writing one SMS. That's toooo much. I want it to be fixed somehow..
never encountered a keyboard problem such as this in the past. If you havent tried changing the keyboard then i'm not sure what it is.
never had any of the issues written about here with my p4350
either with wm5 or wm6
maybe I have missed something, but have you guys tried the wm5 ruu update for p4350? (http://www.brightpoint.com/Brightpo...HTC_NOR_5.4.409.2_4.1.13.34_02.79.90_Ship.exe)
thats a norwegian ruu, but im sure you can get it from your provider..or wait for the wm6
sorry if im stating the obious here
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
Do not launch two or more instances of the program at the same time, could really mess things up. -- se the forum (thanks tucahara)
To stop the program, u must use a process manager.
it would be good if someone could make a cab to install it. -- done see the forum (thanks tucahara)
this is still a beta, I intend to make ajustments as people give feedback.
Thanks,
hope u like.
-----first update---
now, an file called "audioswitch_error.txt" in the root directory will hold the error messages.
------------ List - Working ------------
wizard - I tested
P3301 or P3300 - I tested
att tilt - I tested
touch 3452 and 3450
touch dual
touch cruise
touch HD
Sony Ericsson Xperia X1
BenQ E72
Titan --> see the forum
------------ List - NOT working ------------
T-Mobile Diamond
HTC Touch by Sprint
Samsung SGH-i780
------------------------------------------------------------------------------------
check the new thread at:
http://forum.xda-developers.com/showthread.php?t=502361
new aproach to do the switch and now open source, even with an class that others can improve and put in other apps...
Some people complain about me not openning the source of the app, I have just made this way because there was proprietary code inside and I had no time to rewrite it without the proprietary code.
I have made the best I could, and now I had some time and rewrite the app in open source, to those who only complain about it, get the code and make it better instead of complaining!
Thanks for all that encourage me to continue the work and helped the development.
will retire this project for while...
thanks u all.
Audioswitch for Skype
On HTC Touch by Sprint (CDMA, also known as Vogue), audioswitch does switch the audio in the Skype 2.5 windows mobile PPC from external speaker to handset. Unfortunately, the microphone is then also disabled. I hope you'll be able to tweak your audioswitch to resolve this.
Thank you so much for developing this wonderful applet. I'm sure you will have the gratitude of many frustrated Skype windows mobile users.
What really happens is that when the sound output is switched in some phones, the microphone gain changes too. This happens because the phone thinks it is a "normal call".
Most of the times the mic gain increases, but in your phone it must be decreasing. Try to figure out in registry where the mic gain controls are recorded and chage all of then to the same value. I had this issue with my P3301 and solved this way, but there is quite a time now and I do not remenber where are the reg keys to change, but I have found the information here in the forum.
I will try to figure out for other "hack" to solve this issue... thanks for reply.
doesn't work at T-Mobile Compact IV (aka Diamond)
Sound went to loudspeaker....
PS: fring last version working fine with sound at mine phone (without any additional programms). Sound is going to correct destination automatically
I just tried the latest version of Fring, which automatically switches audio to earpiece when call is connected.
The same issue occurs with the new Fring as I described above with your audioswitch program: I can hear audio through earpiece, but microphone doesn't work (or is inaudible).
I couldn't find a tweak or registry hack to correct this. Any help would be greatly appreciated.
MarceloFB said:
This program is an evolution of the first I made. It will route the audio to the earpiece when an certain program is running.
I put the program here because I have test it in wizard, if people test this in others phones and it works, please post here and maybe move this this thread to an more "generic" forum.
the program MUST be under "\($program files)\audioswitch" folder, you must unzip the contents to this folder.
the configuration file (command.txt) is under this format:
1000
skype
fring
etc
the first line is the delay(in miliseconds) in witch the program will "look" if a program in the list is in the top level window, faster phone, smaller delays, I recommend 1000 ms.
the next 20 lines are the programs you want the audio to be routed to the earpiece(max 20 lines for now).
Again the program is under the "do it on your own risk" and "I am not responsible for anything" licence. And,of course, it is free!! Do not sell it!
It is manly intended for little expert users, as it is still in "beta" fase, hehehe.
How it works:
the program runs in an eternal loop and look for the title of the current window that is displayed for the user in a time interval.
When the program mach the title window with one of the names user configured it it will switch the audio, when the program is not running anymore, the audio will swich back.
it would be good if someone could make a cab to install it.
this is still a beta, I intend to make ajustments as people give feedback.
If someone like this program and wants to make an donation...
https://www.paypal.com/cgi-bin/webscr?cmd=_donations&business=4WLQVA6LTKWSL&lc=GB&item_name=marcelofb&item_number=marcelofbxdadonations¤cy_code=USD&bn=PP%2dDonationsBF%3abtn_donateCC_LG_global%2egif%3aNonHosted
Thanks,
hope u like.
Click to expand...
Click to collapse
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
OOOH
If this program works on the new BenQ E72 I'm getting in a couple of days I'll certainly donate!
THANKYOUTHANKYOUTHANKYOU
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
baal_zebub said:
hello,
it does not work on hermes (tytn).
by the way "troca2" does work on hermes! - maybe you guys want to work together?
Click to expand...
Click to collapse
hehhehe, I made troca2, I will see if the switch code is the same or if I have made some mistake...
are u sure you have put the program in the correct directory?? I will make some modifications to have an error feedback. So u can see if something is wrong...
JKingDev said:
I have an idea. Rather than regularly polling to see what the current windows is, why not use a windows hook to monitor windows messages. When you see a message indicating a window has come to the foreground test it against your list of windows and enable/disable audio switch as necessary. Use SetWindowsHookEx and hook for WH_CBT messages. If you are unfamiliar with using SetWindowsHookEx I could supply you with the hooking code and all you would need to do is insert the code to check the window names, enable the audio switch, and disable the audio switch. Or you could send me the enable/disable routines.
Another tip, I noticed that skype places an icon in the notification area during a call. If there is someway of detecting the notification icon that could be another great way to trigger the switch.
Great program though. Works beautifully.
Click to expand...
Click to collapse
It is a good idea to use hook, I have not think of it!
I use a proprietary code included in a lib at the company I work for to make the "switch" but it is not different of what u find here in the forum.
Maybe we can make an effort to re-make it with hooks...
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
so to sum up the way i have it now (most files included) on my xperia x1:
1) installed skype
2) installed mortscript
3) add skypesoundswitch to \windows\....
3) add skype.mscr to \.... (root)
4) overwrite skype.lnk with the new skype.lnk in \windows\start menu\programs\..
in the way whenever i open skype(.lnk), it opens skype.mscr, this opens skypesoundswitch.exe and than skype.exe... when you close skype.exe it closes skypesoundswitch.exe...
it seems to work perfect.. but hey maybe i am doing something totally wrong here.. than just shout!
by the way, the .mscr and the .lnk files are offcourse edit-able .. so you can put the files everywhere you like..
madhijs said:
so this program must run all the time? after every softreset you have to start it?
is it not easier with mortscript (for example) to make an shortcut that opens skype as well as the audioswitch program? and closes the audioswithc program when you close skype?
I am using it right now and it seems to work perfect:
i used this script after installing mortscript (http://www.sto-helit.de/):
run( "\Windows\SkypeSoundSwitch.exe" )
runwait( "\Program Files\Skype\Skype.exe" )
close( "troca2" )
(see that in my case i downloaded your original program and renamed it to skypesoundswitch.exe and put it in the windows map)
I renamed it so i could remember what the purpose the file had.. changed nothing but the name!
Thanks for the program by the way! it always worked perfect!!
Click to expand...
Click to collapse
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you will have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch. Or please show me where to find details on how to code this myself. Thanks!
Hat off to both of you and really glad that we will have a much improved solution.
JKingDev said:
That works great too. The advantage of this new program is that it will only reroute the audio when skype is in the foreground. You could minimize skype and leave it running, and audioswitch will automatically restore your sound. Get a call and open up skype and your sound goes back to the earpiece.
I will create the code to do it with a windows hook when I get a chance MarceloFB. Please pm me your email address. All you have to do is insert the code to read the config file, check the window names, and when necessary enable or disable the switch.
Click to expand...
Click to collapse
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
madhijs said:
okay! I only used skype to make calls and than get offline so this way did the trick for me! but i have to admit it would be much better when i can keep skype online!
this new program does the trick indeed! it changes the output back when i minimize skype!
But still my question above, you have to start this program on every startup isn't it? what does it do with the battery?
Click to expand...
Click to collapse
Yes it must be run at startup but placing a link in your startup folder will make everything transparent to the user. I don't think there will be an effect at startup. In it's current form it must check every second (or whatever you set the timeout to), but its only a little bit of code. I am not really sure if that will really have an effect. The more often it checks the faster it will switch when you open skype, but also the more processor use. Check less often and it uses less processor, but there might be a delay in switching the audio. I proposed doing it by hooks though because this would use even less processor. The app will only check when a new window takes focus, rather than just periodically checking. This way it only checks when it needs to and will always switch instantly.
I am glad u liked the program.
I will try to answer most of the questions...
1- JKingDev:
I have though in your idea of using hooks, but if I use a hook, the program will have a loop anyway to check for the messages(hidden loop ;-) ), and it would have to have an "fake window" or something to process the messages. This way we have only one loop, in a very simple command line program with high optimization, so we have to think what is really the best way of doing it... I will pm u as soon I have any time to "program" again. hehe
2- people that uses mortscript with the old "troca2"
I will try to make a way to make this program work the same way as troca2, maybe with an "argc argv", wait the next update.
3- the battery life??
if u notice any battery life decreasing with the usage of the program, configure a bigger delay, maybe 5000ms, it is a matter of adjust the "timming" for each processor. Post your results here so others can find the optimum value for the delay in their phones.
4- have to start the program every reset?
yes, just put it in the startup folder.
maybe someone can make an cab that put the program in the right place and a link in the startup, it would be cool! I dont have an easy program to deal with cabs, and the vs projects for cabs.... I really cant make that thing work!!
well it is only the batterylife i was worried about. but i'll try running the phone this weekend with the program running and doing some skype.. lets see how it turns out!
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
weekendli said:
For folks who have issues of mic on using this program, there is a quick solution for this problem. You can try sjphone. It provides a internal mic volume control. However, the major setback is that it's only working in wm5.
my 2 cents
Click to expand...
Click to collapse
will check this, but people reported that worked in xperia... and it is running in my P3301... anyway, will check and post an wm6 build if it is the case... check the error file and see if it tells anything.
Other thing, this program uses low level api`s, so your windows MUST be fully unlocked for it to work in wm6.
How can you remove an entry in the Remove Programs settings without actually removing the program? I want to make sure that the program can never be uninstalled ... that is, using the simple Remove Programs feature.
Peter
good question...maybe in the registre of windows...(maybe HKLM/Software...)
PLEASE SEARCH THE FORUM BEFORE POSTING!!!
http://forum.xda-developers.com/showthread.php?t=360851
Your welcome!
It does NOT work!
You know, I'm really quite tired of people TELLING others to do a search. I did a search, with absolutely no success.
Furthermore, I tried both methods suggested on that other thread, and neither worked.
It's true, if I removed the directory from Windows\AppMgr, it did NOTHING.
If I changed the name in HKLM\Security\AppInstall, it did NOTHING.
Any suggestions?
Peter
I just tried the solution suggesting deleting the corresponding folder in \Windows\AppMgr myself and it worked! After deleting the folder of an app and trying to remove it from within "Remove Programs" it said: "XXX was not uninstalled properly. Do you want to remove it from the list of installed programs?" After hitting yes, the entry disappeared!
Yes, it has also worked for me in the past; however, in this particular case, the program name will not disappear. The program is called Mobile Justice. It's an anti-theft program. I've tried two others, WIMP and Ultimate Theft Alert. WIMP was simply too cumbersome. UTA was quite good, but it has a problem with my Touch HD. The feature where it sends the GPS coordinates of the "stolen" phone to a "safe" phone has a bug. It only sends the latitude, and not the longitude. Strange! Hopefully it can be solved, because the program otherwise seems quite good.
Regarding Mobile Justice, it's also a great program, with one flaw. It shows up on the Remove Programs list, and you can easily find it in the registry, so any thief could easily uninstall it.
However, after using the \Windows\AppMgr approach you mentioned above, while the name remains on the list, the actual ability to remove the program is prevented. I guess it's a reasonable solution to the problem. I also went into the registry and changed the key name in HKLM\Security\AppInstall from "Zloy Mobile Justice" to a rather ambiguous looking name.
PeterHTC said:
Yes, it has also worked for me in the past; however, in this particular case, the program name will not disappear. The program is called Mobile Justice. It's an anti-theft program. I've tried two others, WIMP and Ultimate Theft Alert. WIMP was simply too cumbersome. UTA was quite good, but it has a problem with my Touch HD. The feature where it sends the GPS coordinates of the "stolen" phone to a "safe" phone has a bug. It only sends the latitude, and not the longitude. Strange! Hopefully it can be solved, because the program otherwise seems quite good.
Regarding Mobile Justice, it's also a great program, with one flaw. It shows up on the Remove Programs list, and you can easily find it in the registry, so any thief could easily uninstall it.
However, after using the \Windows\AppMgr approach you mentioned above, while the name remains on the list, the actual ability to remove the program is prevented. I guess it's a reasonable solution to the problem. I also went into the registry and changed the key name in HKLM\Security\AppInstall from "Zloy Mobile Justice" to a rather ambiguous looking name.
Click to expand...
Click to collapse
I'm not an expert on this and just guessing - but maybe it's not a coincedence that the program you're having the problem is a security related one... Maybe it diggs itself deeper into the system to work? Then it probably would require a very specific solution to get it out of the list of installed apps... :/
Under normal circumstances I'd agree with you; however, after several communications with the software developer, he tells me that I've done everything correctly. So, I'm still stumped.
Peter