hello,
i bought a netgear usb wifi wg111 v2 wifi adapter,and i am unable to connect my wizard to the usb wifi. What exact settings am i suppose to do.
i have already :
1) assigned ip to usb wifi 192.168.1.55
2) assigned ip to wizard 192.168.1.200
i cannot ping ti 192.168.1.200 (time out),i could ping 192.168.1.55
security is open , shared. i dont know if these means security is disabled,but if someone can please tell me the right configuration it will be much appriciated.
thank you
wizards have a problem with either wpa or wep security, but i forget which, try disabling each
Related
Please can anyone help me. I have just recieved a sandisk wifi card but I am having trouble setting it up and connecting with my netgear wireless adsl router :evil: . Does anyone know where I can get step by step instructions for setting this up and all the settings I need?
Thanks
It would help if you told us which router model you have. What seem to be the problems, remember on routers you might have MAC filtering activated and also WEP encryption.
Sorry it is a Netgear DG834G. Having played with it all night, this morning I have now connected and can browse with PIE. No idea what connections I changed to get it working though, but would like to understand what I should have been setting.
Thanks
Can't make this combination work
Hi,
Have got the same router and Orange SPV M1000 on W2003 SE. Have been trying to make this work for a month now. There is no MAC address filtering and no Encryption. It did detect the router once or twice and worked fine once. But it has not worked since then. Have tried speaking to SANDISK, who said that there is a problem with the router and that I need to speak to Netgear. I also tried the Socket's drivers with the SANDISK WiFi, but no luck. Have checked all the settings etc but with no luck yet. The netgear router wirks perfectly all right with another Netgear USB Wifi adapter on a desktop machine. The problem is that the Sandisk WIFI cannot even see the netgear router (the 'Allow Broadcast of Name (SSID)' has been selected on the netgear router).
Can somebody help me out with this?
Thanks
RAJ
Hi,
Try changing the Wireless Radio Channel to eleven (11).
Regards,
Thanks for your reply. It has been set to Channel 11 by default!
Raj
Hi,
There is a few thing that you can try.
1) Disable the encryption.
2) Disable the G mode.
3) Disable any of the multiplier mode. This means that to run the router at max of 11Mbit/s only.
Regards,
Kueh.
All done still no luck. It does not pickup the router.
DHCP has been enabled on Netgear router. Do I need to add any settings manually for this to work?
Raj
Some settings I have set that now allows me access to netgear router and on to the internet. Still need to understand if I can access files on PC.
Under connections/advanced/select networks (programs that automatically connect to a private network) My Work Network/proxy settings. Tick both and put in netgear router server IP address. In Advanced HTTP has same IP address.
Under Connections/advanced/network card/ My network connects to... the internet. Click on adapter (I used Socket drivers for Sandisk card) for IP address select Use server assigned IP address.
You then need to set up the router to allow you to have access.
Go into Wireless Settings.
Name (SSID) - the default given
Region - mine is Europe
Channel - mine is 11
Mode - mine is g & b
Wireless Access Point
Enable Wireless Access Point selected
Allow broadcast of name select
Wireless Station Access list
Click button
Select Turn Access control on
Add New Station manually
Type in a device name for your XDA
Type in the MAC address off the back of your Sandisk card
Press Add
Security options
Select WEP
WEP Security Encryption
Authentication type - Shared Key
Encryption strength - 128 bit
WEP Key
Passphrase - (I used a word and pressed generate)
Key 1 - was populated and selected (When connecting with XDAII I was asked for this Key)
I think that about sums it up. May have changed other settings in my frustration of trying to get it to work so no guarantees.
Regards
Tried everything as suggested by you. I just can't make it work. I can't even see the router in the available wireless networks lists. I have given up now!
Thanks for your help.
Regards,
RAJ
Im looking to get the Wifi working on my Vario at home. My current Access point wont connect due to T-mobile's lock out of the 802.11g.
So I can get a Access point that works, I thought it would be helpful to post up your Model with a Yes or No after you have tried all the different settings as posted on the forum e.g. different channels and mixed mode etc.
This is for g Locked Varios only please not ones with flashed ROMs.
Please keep it simple Model YES or NO.
Thanks
:wink:
To Start us off......
Inexq HR054g Access point (NO)
if your Wizard has b only (ROM issue, not hardware) then ANY router which is set to allow g only will fail to connect. yours "should" allow "b" devices to connect http://www.inexq.com/web1/images/product/spec/hr054g.htm
So maybe you have a setting that is allowing "g" only
Beeble said:
if your Wizard has b only (ROM issue, not hardware) then ANY router which is set to allow g only will fail to connect. yours "should" allow "b" devices to connect http://www.inexq.com/web1/images/product/spec/hr054g.htm
So maybe you have a setting that is allowing "g" only
Click to expand...
Click to collapse
Router is set to mixed mode, it can see the network but wont connect
Have you got MAC address filtering enabled on your router and forgotten....I did.
Also try changing WLan card settings on your XDA from Best battery to best performance..Make a lot of difference. and many have found theirs connects after this
All turned off any other options
I have a BT2100 wireless router and mini-s, sometimes it won't connect until I stop active sync running on the mini-s ???
3-Com OfficeConnect ADSL Firewall Wireless 11g Router (set to mixed)
Vario will only connect when router set to open access i.e. security disabled. Any other setting i.e. WAP, WEP causes the routers internal DHCP server to fail to send an IP address back to the Vario... or the Vario being unable to acknowledge the router?
Have got a couple more routers comming my way, will post them up when Ive had a chance to test them
devasoftware said:
3-Com OfficeConnect ADSL Firewall Wireless 11g Router (set to mixed)
Vario will only connect when router set to open access i.e. security disabled. Any other setting i.e. WAP, WEP causes the routers internal DHCP server to fail to send an IP address back to the Vario... or the Vario being unable to acknowledge the router?
Click to expand...
Click to collapse
I've seen this issue detailed elsewhere but I can't remember exactly where - apparently for some reason the 3com sends back an IP v6 address when security is enabled, which the Wizard can't use.
So far I've used a cheapie Origo wireless router (conexant chipset) and a Netgear D834G (in mixed mode), my Wizard seems happy with both.
John
hi, im not able to connect to the net with my wizard.
i dont have a wireless router so am connecting directly to my laptop, the ad hoc connection i have made works fine for file tranfers, but not for activesync or connecting to the web in either PIE or minimo.
i know activesync isnt possible but surely i should be able to use the broaband from my laptop?
any pointers would be greatly appreciated. software? settings?
its a t-mobile uk vario with qtek test rom.
also anyone know of a remote control utility, i use logmein but would like something a little more menu/macro based for control of media.
cheers
kevo
Try turning on Internet Connection Sharing (ICS) on your laptop; that'll make your laptop act a bit more like a router, providing NAT services to the Wizard.
yeah i've tried that, and i've just tried bridging connections (dont really know much about that) but that hasnt worked either.
kevo
My configuration
Me too, I use ADHOC connection for my WLAN.
PC configuration:
ADSL connection shared
Adress IP:192.168.1.1 Mask:255.255.255.0
PocketPC configuration:
Adress IP:192.168.1.55 Mask:255.255.255.0 Gateway:192.168.1.1
DNS:80.10.246.2 for Wanadoo
Your problem is certainly the DNS.
You can put 192.168.1.1 too.
so it is possible? cool!.......but im still having problems.
i cant figure out how to enter these settings, not to sure where to put them,
iv tried puttin the DNS in the -> connections -> vpn
and -> network cards -> networks adapters -> SDIO WLAN Wireless Adapter
sorry to be a pain, but could you point me to where to get each address and where to put them?
also is there anything particular you did to set up the adhoc network? i just used the Windows XP wizard and then ticket the AdHoc option after.
my laptop is conected to the router and the router is connected to aol adsl.
the ip address of my laptop is showing as a simple 10.0.0. number on the LAN but "Autoconfiguration IP Address. . . : 169.254.235.147" for the WLAN
none of my setup has a static ip address, could this be causing the problems?
thanks
kevo
It's more hazardous without static adress but it's can work.
My PC has directly access to the Internet with a ADSL modem.
It's here (network cards -> networks adapters -> SDIO WLAN Wireless Adapter )
Apparently, it's ok for your PC and the Ad-Hoc mode.
Maybe, you should have your adress IP WLAN on the same network adress of your router.
I GOT IT WORKING!!!
I started again from scratch.
set a new WLAN. added new setup to the vario, added the DNS etc to the vario.
the problem i was having was the way i was sharing the internet connection, i was trying to shared the internet from the wireless to the lan rather than the internet from the lan to the wireless (if that makes sense to anyone!!!). i also ticked all the connection sharing services to allow them, just need to go through them and see which i dont need now.
thanks for the help guys
kevo
(its showing my transfer rate as 11Mbps, although i think iv done the G tweak and my laptop says its got a G card. what speeds should i be getting?)
hi guys,
i am hoping i will get the solution for my problem from this forum if there is one on this earth.
i bought htc h2.i am trying to connect my htc to my wireless router at home but its not connecting to it.it has found my home network and trying to connect but doesnt connect actually.
I have a nokia n80 as well.i just need to put the wep key in that and it connects with the wireless dont know whats wrong with my htc.
when i go to the wifi setting and put the wep key in further details are as follows
netowrk to access: only access point
Network name: home
connects to: The internet
authentication : shared
data encryption: wep
network key : xxxxxxxx
key index:1
use IEEE 802.1 option is checked.
EAP type is smart car or certificate
here when i click on properties tab it says
"Cannot log on to the wireless network.this network requires a personal certificate to positevely identify you"
I have also tried aquiring the certificate but it doesnt retrieve it
i put the log in,password and server as my netgear's IP address.
on the wifi advanced settings in HTC it shows the MAC address but doesnt show the IP address .
please please help pme out here.i have spent hours sorting this out but not successfull yet.hope anyone experienced can help me here
Thanx in advance.
regards
any advice guys???please guide me into the right direction and i will try and sort this problem out by trial and error.
have u tried searching and connecting with wifi monster. im sure it should work.
uncheck
Use IEEE 802.1x network access control
thanx for the suggestions.before doing anythingele i hard reset the phone.and it is connecting to wifi fine now.
I just got the phone and it won't connect to my router i've done just about everything i've tried everything and i still can't seem to be able to connect to my wifi please help
rTek said:
I just got the phone and it won't connect to my router i've done just about everything i've tried everything and i still can't seem to be able to connect to my wifi please help
Click to expand...
Click to collapse
It might be a problem with the router itself, or the passphrase you're entering could be incorrect? Please try connecting the phone to another WiFi hotspot when available and see this works.
the problem might be with the router because i was able to connect to the router where my dad works, but my home one it won't.
I use belkin router and not sure how to fix it anymore though
Some basic troubleshooting questions:
1. Can your phone connect to other routers? If so, are they secured or open?
2. Can other devices connect to your router reliably?
3. Is the error actually that it fails to obtain an IP or that it fails to connect or authenticate? IP address assignment happens after successfully authenticating with wireless security, so if the actual error is that it can't obtain an IP, that implies that something is wrong with your DHCP configuration, likely on the router.