Database Users

White Screen... status lights okay?

so i had reset my phone and i had installed the Registry Wizard and such. i turn the phone on and the cingular splash screen comes up and says 2.25 and all that good stuff. then it goes to a white screen. the status lights blink and the screen is responsive as well as the buttons. but all i see is white screen. if i call the phone, the white screen comes up with no sound. ive tried to reset it many times as well, battry out and all that too.
any ideas?

i used an MDA reset thingy i found on this site. it worked. got it to 4 colors and flashing it now. what a pain in the ass.

camelontherun said:
i used an MDA reset thingy i found on this site. it worked. got it to 4 colors and flashing it now. what a pain in the ass.
Click to expand...
Click to collapse
Which method was successful for you. I have tried virtually everything I have found on this board and still nothing but a white screen. Please help.
Thanks.

I installed the Registry Wizard tonight and the exact same thing happened to me.
When I connect the phone to my PC, it's not recognized so I can't delete the program that way.
Any suggestions would be much appreciated.

double post

Loud Ringer Volume

I already asked this in one post, but no one answered, hoping someone has more info.
For some reason once I install either mUn or LSVW's WM6 ROM's my ringer volume is jacked through the roof! I have my ringer all the way down and it's still very loud. When I turn it up it does indeed go louder, but I really don't need it any louder. Is there some low ringer fix that they might be applying to their ROM? Does anyone know where I can go to fix this problem and turn it down a bit? I don't need my whole office hearing my phone ring all the time.

Seriously, no one else has this problem with either of those ROM's? Maybe my Trin is jacked huh?

I found about this right now...
Mun, please post a cab or two

i agree.. my volume is waaay louder than before ha.. funny cause i think in the WM5 aku3.5 ROM i last flashed i noticed my volume went softer.. now its opposite.. it's not bugging me too much, but i've not received any responses to any queries i made about what makes the volume change either..

Edited: deleted

mun_rus said:
Try this patch)
Click to expand...
Click to collapse
Holy crap! That appears to have severly messed up my device. I get the boot screen, then my screen just goes white. Nothing ever loads up, the green light blinks like there is service, but I cannot do anything.
EDIT: I'm reflashing and I will try to install again on a fresh ROM.

schwags said:
Holy crap! That appears to have severly messed up my device. I get the boot screen, then my screen just goes white. Nothing ever loads up, the green light blinks like there is service, but I cannot do anything.
EDIT: I'm reflashing and I will try to install again on a fresh ROM.
Click to expand...
Click to collapse
BTW, it works for my and lvsw roms.. Forgot to say..

mun_rus said:
BTW, it works for my and lvsw roms.. Forgot to say..
Click to expand...
Click to collapse
Hmm...same thing on a fresh reflash. I'm using your rom mUn (which is awesome btw) and for some reason it kills my device after the boot screen.

it doesn`t mun...
Crashed mine too...

Sorry...
But i tryed it on my wm6.SE rom and it worked for me...
I'll rebuild cab

Urgent!
How the hell to reflash??
When I connect my PDA to PC ruu updater says no device found??
schwags and the rest, how can I reflash my device?

I just pulled my battery, then hold down the camera button while you turn on the device. This should get you to the tri-color screen, then run the update and it should work.

U don't need to reflash
Hold 2 softkeys at the same time and click reset
So you will see message on grey screen. Press green button for Hard Reset and Ok for boot

mun_rus said:
U don't need to reflash
Hold 2 softkeys at the same time and click reset
So you will see message on grey screen. Press green button for Hard Reset and Ok for boot
Click to expand...
Click to collapse
Ha, thanks, good tip mUn! I'll have to make sure I do this next time I have a problem.

damn my trinity is bricked
I can`t get to the bootloader, and I cant hard reset...
More detailed please

grega_slo said:
damn my trinity is bricked
I can`t get to the bootloader, and I cant hard reset...
More detailed please
Click to expand...
Click to collapse
have you tried taking the battery out?

yeah
I came to the white screen with green light flashing...

grega_slo said:
yeah
I came to the white screen with green light flashing...
Click to expand...
Click to collapse
What if you pull the battery, and then hold the camera button down while you start it back up again? That doesn't get you to the boot loader? it worked for me.

WHILE
That was pretty much only info I needed!
Reflashing now...
THANKS!

grega_slo said:
WHILE
That was pretty much only info I needed!
Reflashing now...
THANKS!
Click to expand...
Click to collapse
Good news! glad you got it working!!

white screen of death....

ok heres what iv done about a month ago i was at my friends house
and decided to conect to the wireless network shortly after loading the home page the wireless disconected. i was unable to turn wireless on after that and since then my systems just litteraly shut-down 1 by one i lost abilitie to send sms. then i lost abilitie to even answer phonecalls id click answer and it would disconect straight away. and then this morning i turned it on and it just goes to instant white screen i cant even load bootloader it only shows a whitescreen no matter what i do. i cant think of anything else to try iv had a look on the forums and everyone just says to load the bootloader by pressing camera button and power button but it still goes to whitescreen the led at the top of the phone flashes red then about 2 seconds later goes to whitescreen my computer doesnt even pick it up now either is the phone just "dead" or can it be recovered?

alright heres an update to my atom so far iv managed to get rid of the whitescreen but cant for the life of me get past this new screen its just rainbow lines it looks as though all the lines on the screen going top to bottom have been coloured a diferent color
anyone know how to fix it? iv tried camera plus reset button and same thing

nrd4eva said:
alright heres an update to my atom so far iv managed to get rid of the whitescreen but cant for the life of me get past this new screen its just rainbow lines it looks as though all the lines on the screen going top to bottom have been coloured a diferent color
anyone know how to fix it? iv tried camera plus reset button and same thing
Click to expand...
Click to collapse
hi, just curious as to how you manage to get rid of the white screen, incase this happens to my unit/device as well?

ahaha yea im still trying to work that out myself i mean the phone still boots up and it can still recieve calls but only get a plain screen with multi coloured lines across it so cant use anything whatsoever or call anybody cause cant type anything in the screen i even bought a new screen adn have the same problem not sure if theres a way to totaly wipe the system and reinstall without having to use the atom screen or not if there is i would love to be told how to do it

is it my screen or the ROM?

hi everyone, this is my first official post on the forums, and well i need ur help on my phone, for some reason when i slide my phone the screen shows like random lines etc, then when i slide it back it does the same, and itll take like a good 30 mins to get the screen right to its proper look, usually itll show like blue, or green, and even sometimes i get that "White Screen" where id see it everytime i slide or slide it back so idk, and even when i soft reset, either the screen is out of line or itll show those random lines again also to add to that sometimes the soft keys on the front dont work at times soo idk if its the ROM i just put in which was from T-Mobile or my screen :/.....i need ur help, cuz i might consider getting the screen replace or load the bootloader....appreciate the help and btw heres my video i just posted to give a good clearance of what im talking about and when i show the phone up close im fiddling with the power button to show how it is, thnx
http://www.youtube.com/watch?v=-2Lnwzqkt8k

im sure its the rom, i used pdaviet's rom and it did that ****. i replaced it with a different rom and it never did it again.

well i just redid everything and EVEN on the bootloader still had the whacky look on the screen...

ok well i put the old rom, the one that came with when i first got it, and still no luck....could it be a faulty screen connection? or the screen dying? and btw the phone has a real irritating noise.... and also on bootup he screen wont be aligned....idk what to do...

God..... Vital information you didnt put in... if you hear the noise, then its a goner. it prolly has a leaky capacitor, or the screen is some how desoldered and shorting out the board.
XERO_Racer said:
ok well i put the old rom, the one that came with when i first got it, and still no luck....could it be a faulty screen connection? or the screen dying? and btw the phone has a real irritating noise.... and also on bootup he screen wont be aligned....idk what to do...
Click to expand...
Click to collapse

well whats the best bet? should i get this repaired as soon as possible???? or get a new one? and doubt bout the second reason, cuz the noise stops when my screen is off(of course) and sometimes when its in portrait mode, ya the screen would be on and would be white but none of that hating noise

HD2 Black screen after a call?

Is there a fix for this? No matter what rom I use, Didn't try Froyo, but after receiving a call, the screen stays black, so I spam the hard keys to wake the screen after about a minute or so. Can anyone help?

Curiousn00b said:
Is there a fix for this? No matter what rom I use, Didn't try Froyo, but after receiving a call, the screen stays black, so I spam the hard keys to wake the screen after about a minute or so. Can anyone help?
Click to expand...
Click to collapse
I have the same problem with 2 HD2 phones. Not aways, but most of the time. I ask this question before - http://forum.xda-developers.com/showthread.php?t=1349809 , but i didn't get the answer.
May be it is hardware problem, but if it is it's gonna make me a problems every time.
If you figure it out, pls PM me.

Once in a while i have the same problem, but when I clean the screen (until it looks shiny ) and it gets better…
(I clean mostly the top of the screen)
I don’t believe it is the “solution” but works for me…

[email protected] said:
Once in a while i have the same problem, but when I clean the screen (until it looks shiny ) and it gets better…
(I clean mostly the top of the screen)
I don’t believe it is the “solution” but works for me…
Click to expand...
Click to collapse
If you push the End button (or any other button) before clean the screen, what happens. Does the screen stays black???
I think that this is a software problem, because other ways every time when I press the End button (or any other button) it will give me Nothing.

luba6ky said:
If you push the End button (or any other button) before clean the screen, what happens. Does the screen stays black???
I think that this is a software problem, because other ways every time when I press the End button (or any other button) it will give me Nothing.
Click to expand...
Click to collapse
[email protected] said:
Once in a while i have the same problem, but when I clean the screen (until it looks shiny ) and it gets better…
(I clean mostly the top of the screen)
I don’t believe it is the “solution” but works for me…
Click to expand...
Click to collapse
luba6ky said:
I have the same problem with 2 HD2 phones. Not aways, but most of the time. I ask this question before - http://forum.xda-developers.com/showthread.php?t=1349809 , but i didn't get the answer.
May be it is hardware problem, but if it is it's gonna make me a problems every time.
If you figure it out, pls PM me.
Click to expand...
Click to collapse
@all I found tht these help. The screen blacks out for about 5 seconds now... its more of a temp fix.
https://market.android.com/details?id=com.keyes.screebl.lite
And
http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
Credits go to Quiethinker over on a different thread - http://forum.xda-developers.com/showthread.php?t=1061481
Sent from my LG-VM670 using Tapatalk

black screen after recieving or making a call
Curiousn00b said:
Is there a fix for this? No matter what rom I use, Didn't try Froyo, but after receiving a call, the screen stays black, so I spam the hard keys to wake the screen after about a minute or so. Can anyone help?
Click to expand...
Click to collapse
I have the exact same problem. I am using the SD card android version. I've tried different ROMs, but with all I have this problem. When I boot into WinMo I don't have this problem at all, so it doesn't seem to be hardware related.
I can use the phone with anything else without any problem using the SD android version, only when I recieve a call or call out myself the screen blacks out and the phone seems unresponsive. After about 30 seconds to a minute the phone shows the lock screen.
I would love to work with the Android version for normal operation but because of this I still boot into Winmo within office hours...

erikgee said:
I have the exact same problem. I am using the SD card android version. I've tried different ROMs, but with all I have this problem. When I boot into WinMo I don't have this problem at all, so it doesn't seem to be hardware related.
I can use the phone with anything else without any problem using the SD android version, only when I recieve a call or call out myself the screen blacks out and the phone seems unresponsive. After about 30 seconds to a minute the phone shows the lock screen.
I would love to work with the Android version for normal operation but because of this I still boot into Winmo within office hours...
Click to expand...
Click to collapse
Your better off doing what I did. In Android, sonewhere in the settings for calling, change the sensor to off so it never blacks out. In Miui rom its in program's, then calls.
Sent from my LG-VM670 using Tapatalk

Task 29 and start fresh. Only thing that got rid of it, test when you first start the rom to make sure it works normal, then start adding your apps and such.
Or increase the 125mhz CPU settings to 245mhz under cyanogenmod settings/performance/CPU or governor settings.
Sent from my HTC HD2 using Tapatalk

my screen stay black (off) when i take the phone away from my face EVERY call as well. this is what i do and it works everytime.
1.)pull the phone away from my face (duh)
2.)starting with it facing the sky, i turn it to face the floor (when i say facing i mean screen up ... then screen down)
3.)as soon as i turn it back over (screen face up) it turns on
im thinking its a sensor issue??? either way it works and i dont go on a hardware button mash fest to turn my precious leo back on.
if this helps please send thanks ... if not tell me im crazy :-D

Curiousn00b said:
@all I found tht these help. The screen blacks out for about 5 seconds now... its more of a temp fix.
https://market.android.com/details?id=com.keyes.screebl.lite
And
http://forum.xda-developers.com/attachment.php?attachmentid=449922&d=1290758421
Credits go to Quiethinker over on a different thread - http://forum.xda-developers.com/showthread.php?t=1061481
Sent from my LG-VM670 using Tapatalk
Click to expand...
Click to collapse
I just download this apk and will try it ....
But I think it's hardware problem (may be with the sensor), because when I turn back on Win Mobile 6.5 i have the same problen ...
I think to bring the phone to service
... when I take it back will tell you what is exactly the problem ...

Task 29 then install windows, next install the right radio version , finally install the android

like dragonovus say´s try completly reinstalling android.
and please feedback here

BUILD.PROP baby!!! there is a tweak for this and i believe it works( in the prop ) dont know exact address but google "build prop tweaks" also use setCPU and set the lower number to about 350+ also try to use the end hardware button less cuz this has been addressed in another thread..... the button sticks or sum crap..... i use zmooth and never use the red end button........... good luck

Will try all, but now I use ' Screen stays on '
Sent from my LG-VM670 using Tapatalk

well ... for me Screebl Lite didn't help me

Reinstalling Windows is not necessary. Just make sure you have the right Radio and HSPL then do a task 29 before installing Android. But your problem is most likely hardware related. The end call button is most used and therefore prown the wear and tear... Try using the red end cal softbutton. I guess you only have that problem when you use the hardware button right?
In that case it's the problem with the button and not the software...

And at the end did anyone of u solved this? If u need help post reply or pm me. I think i have a solution for u.
Sent from my HTC HD2 using Tapatalk

PPKLP said:
Reinstalling Windows is not necessary. Just make sure you have the right Radio and HSPL then do a task 29 before installing Android. But your problem is most likely hardware related. The end call button is most used and therefore prown the wear and tear... Try using the red end cal softbutton. I guess you only have that problem when you use the hardware button right?
In that case it's the problem with the button and not the software...
Click to expand...
Click to collapse
Yes, man! I have the HSPL2.08 and radio 2.15.50.14 ... I think we all do. I can't use the soft buttons, because I can't see them. That's is the problem. The screen is black and won't lights up. May be I can't read you ... but I try to run back Win Mobile just to check is it from android OS or the sensor...

build.prop does not help
I tried the build.prop thing. I added those 2 lines at the end of the file:
ro.lge.proximity.delay=25
mot.proximity.delay=25
No change, still a black screen after any call.
Any other idea ? How to completely deactivate the proximity sensor ?

Fixed !
I finally fixed the issue by removing the screen protector sheet and cleaning the upper left part of the screen with a dry towel.
It works fine now. It was just a problem of the proximity sensor not being exposed enough.
I hope this helps.