Database Users

Prophet Bluetooth voice dailling

My "old" P800 was able to announce who was calling in my Bluetooth headset. After pushing a button on my Bluetooth headset I was able to do voice dialling. It could even pick up the call without pushing a button on Bluetooth headset.
Can wm 2005 on the Prophet do all this?

I have this working on my Jamin without any hacks

Care to share how? I just got a JAMin. No mention of voice dial except by launching program and certainly no mention of BT button. Pairs with my Plantronics M3000 fine but BT button doeas nothing. Any ideas?
Regards

Query to Wardy about Bluetooth Headset & Voice command
Hi Wardy does your Jamin let you control MS Voice command using the button on the BT headset? Or do you have to press the voice command button on the PDA and then talk through the headset?

Voice Command, once it is installed on the Prophet, works just like it did on the Magician. However, the Prophet (at least in Jamin flavor) has an app that lets you create voice tags to control most of it's functions, and this app can be started by using the button on your bluetooth headset (and accepts audio from your bluetooth headset). There are a few limitations, though: you have to create a voice tag for every single item that you want it to launch... and you can't create a voice tag for Voice Command :?. In other words, it is (as far as I'm concerned) completely worthless :evil:

Re: Query to Wardy about Bluetooth Headset & Voice comma
crackerjack said:
Hi Wardy does your Jamin let you control MS Voice command using the button on the BT headset? Or do you have to press the voice command button on the PDA and then talk through the headset?
Click to expand...
Click to collapse
Hi no sorry I am using the supplied voice command software. Its not a problem for me putting voise dial numbers in and I believe it gives better recognition than text to speach. But that's my view

Cyberon Voice command with Bluetooth in HP6315 and 6515

Hi ,
I know many guys are intesting use VC through bluetooth headset. I found that it can be done in HP6315. Original there is only hands-free/Headset profile for bluetoothn in 6315, the Widcomm BT version is 1.0.0build 3701, the all sounds is from phone to BT headset,the VC dial can be down through BT headset. But the MP3 quality is very poor.
I just upgrade the Widcomm driver to 1.6.0.700, there have another "High quality Audio"profile, so you can use stero BT headset to listen MP3. The quality is good. So if we use SE HBH-ds970 BT headst, we can listen good MP3 and also can dial the number through VC use HBH-ds970. It is very convenience to get both function. When you launch VC, the phone will connect BT handset, the sound is transfer to headset, you can say the number or others instruction by BT headset, when you finish it, the connection between 6315 and BT headset will automatic be active. It will not lost the battery of headset.
Here the question is I 'd like do it in 6515 since I need the mini keyboard and GPS function. 6515 already have "High quality Audio" and "Handsfree/Headset" profile, you can listen good quality music and also can call/answer the calling through BT headset. But it can not use VC, the VC sound is always from phone.
I check the Reg file of them, its are almost same. Unfortunately, I do not have knowledge of Reg file and widcomm stack, can some expert can help me on this?
Thanks in advance!
Regards,
lxy

Could someone share the latest BT drivers for 6515e?
Hi,
I wonder if I could find a good voice dialing software for my iPAQ. Could you please help?
Also, does anyone know the latest BT version post the 1.21 rom?
Thanks and kind regards,
Prankey

Few ms voice command questions

do both version 1.5 and 1.6 work with the atom?
does the registry patch with 1.5 make it work with a bluetooth headset?
does the voice dialer that comes with the atom exec interfere with voice command or do i simply install 1.6?
has anybody here used ms voice command, if so which version and with or without bluetooth and how is the performance?
thanks 4 any info

actually can the build-in voice dialer be made to work with a bluetooth headset, i tried but without luck

HI,
I'm using 1.6 with bluetooth and no problems

so you can voice dial with the bluetooth right?
did you have to do anything with the built-in voice dialer program or just ignore it

Just ignore it.
Microsoft Voice Command works well. It transfer the audio to headset when the headset button is pressed. You can even set it to make announcement to headset.
My only problem is, it speaks too fast & I do not know how to set it.

I'm running MSVC 1.6 on my Atom but the voice dial over BT headset does not work properly.......however 1.6 is much better than 1.5 and I would still recommend it.
Check out this registry edit to SLOW down MS Voice Commander. I set mine to 3 and it is just peeerfect!
http://www.pocketpctweaks.com/pocketpc_tweaks/increase_voice_command_speed

Thanks for the info, angusc.

I should have added that I have tried the Motorola HS700 and also the I-Tech Clip R35.....neither of these seem to work with MSVC but I think it is more to do with the O2 ATOM PDA rather than the BT headsets.

Voice Command over BT

OK, I got a sx66 BA flashed to helmi's wm6. I want to have voice command to go through the BT headsets. I got a BT insignia stereo headset. I tried every program under the sun to get this crap to work! The best ones were MSVC 1.6 and the latest vito voice 2go. MSVC allows me to use voice dial to call but as soon as the phone picks up it switches to phone mic! weird? Vito does not allow me to do voice dial over BT but I can answer calls with my BT! So what Now? Any suggestions? Any way to integrate the two i.e. use MSVC to voice dial thru BT and have the Vito voice 2go handle everything else. Help!

Try here:
Voice Command over BT

Anybody got MS VoiceCommand / BlueAudio to work?

I used to have VoiceCommand and BlueAudio perfectly working on my X1. Now this crappy X2 that messes up so much, canNOT run any Audio to the Bluetooth Headset.
It should have the MS Bluetooth Stack so these programs should work. Perhaps it is some registry change that makes them work?
Anybody got them to work and know how to? Thanks!
It seems that the Bluetooth AudioGateway dll files is not working properly. Tried different dll's from different versions but still did not find the "correct" working one. Anybody???

Couldn't get MS Voice Command working.
Vito Voice Dialer works great though.
Haven't managed to make my X2 work with my existing bluetooth headset.
X2 says it's paierd with the device, but then you can't answer calls or anything else.
If it wasn't for the $$$ I spent to buy this piece of crap, I'd have a new phone already!

Okay, is this vito voice dialer dialing VIA bluetooth or not? And HOW do you press a key on the phone to activate it? What key? And just read their manual, they don't even mention any bluetooth capability there. Can you use bluetooth and how?
Because voice command works (more or less) HOWEVER NOT via bluetooth and since there is NO hard/software button to assign to it, it cannot be activated via the phone either!
I have to press the bluetooth button and then the sound (mic and voice) come out of the phone speaker.
I strongly think this has to do with the bluetooth gateway SE is using with the X2. But I was hoping somebody technical could have found a solution by now. For me voice dialing is essential and my X1 was perfect.
With blue audio I could listen to musik on a mono bluetooth!
Just to mention it, I use SE hbh-PV740 and it always works if making 'regular' calls via the phone over bluetooth. But I cannot initiate it nor voice dial.

I can't get my X2 to do anything with my bluetooth kit, so all your questions re: bluetooth I can't answer.
I start vito from a button on the screen and it works.
For me and my phone, the vito product is much more accurate and reliable than voice command.