Could anyone explain me how can i hush up the strange "3 beep" to the end of a received call? Thank you!
It signals that your connection has been lost - if the person you are talking to hangs up first first, your trin will tell you that you lost connection with the beeping, if you hang up first, it will never need to give you that notification.
I looked around in 'sounds and notifications' to try to disable it with no luck. I am not a registry wizard, so I can't help you there - but it seems that a tweak would be the only way to do it.
Related
There is a bug on my Qtec 2020(FW:166)-
when someone calls me no signal goes to my QTEC(But the beep signal goes from calling phone)-sometimes signal goes only at the end of the call,and i see a call as missed.
what is it :?:
It is difficult to say exactly what could be causing this kind of problem.
Might I suggest some troubleshooting tips?
1. Backup your device
2. Hard-Reset
3. Try some incoming calls to see if they work correctly.
4a. If 3 did not fix, try flashing your ROM with the newest version.
5a. If that solves your problem, re-install all of your programs and you are finished.
6a. If it does not solve your problem, you may have a hardware problem, contact the vendor.
4b. If 3 did fix your problem, re-install your programs one-at-a-time, giving time for testing between loading programs. Only after you have proven that call reception still works do you install the next program. In this way you determine if a program you have loaded is causing your problem.
HTH!
if I understood you correctly, you have a problem where the Incoming Call bubble doesn't show, not ringing sound when someone calls you. And sometimes, it takes like 5 seconds delay before it shows or rings?
i experienced this after installing some phone related software. i suspected that the system somehow is overloaded, and the memory is somehow insufficient to handle incoming call and notify you in time.
Do you have RingtoneX, PocketZenPhone, IA Caller ID, Caller2Picture, Cell Profiler ... etc installed? What are the phone related apps you have installed? Or perhaps, could you list what are in your \Windows\Startup, let us troubleshoot the culprit.
chriswo said:
if I understood you correctly, you have a problem where the Incoming Call bubble doesn't show, not ringing sound when someone calls you. And sometimes, it takes like 5 seconds delay before it shows or rings?
i experienced this after installing some phone related software. i suspected that the system somehow is overloaded, and the memory is somehow insufficient to handle incoming call and notify you in time.
Do you have RingtoneX, PocketZenPhone, IA Caller ID, Caller2Picture, Cell Profiler ... etc installed? What are the phone related apps you have installed? Or perhaps, could you list what are in your \Windows\Startup, let us troubleshoot the culprit.
Click to expand...
Click to collapse
YES.YOU ARE RIGHT.
From your list i installed only POCKET ZEN PHONE(but i also had this problem before i'v installed PocketZenPhone).
WINDOWS/STARTUP:
AFlashMan
CFlashMan
CheckAutorun
ChgDflnk
IA_Caller_ID(MAYBE THIS IS BUG :?: -but i have not it ins.on my QTEC)
MMReg
NFlashMan
poutlook
stk
TFlashMan
GUYS,Please,help...
So,what causes the bug :?: :roll:
I am running PocketZenPhone also, and do not experience this problem.
Unfortunately, I still believe that a HR is the only way you can prove that the problem is caused by software you have installed and not the hardware. It sounds drastic, but you must start from a clean PPC and prove that it works, then figure out which software is causing the problem.
ok,i'll soon try it.
BUT i wanna hear from chriswo what to do,cos he got the same bug. :arrow:
I've got a similar sort of bug, not sure what causes it though and its a pain,
I cant get the volume slider for the phone to stay above zero, i raise it and it beeps as i do it, and i close the volume control, open it againg and it back at the bottom, If i recieve an incomming call, all that happens is the screen flashes with the incomming call alert but no ringing tone at all?
how are the phone settings set ?
as in ring type ?
and how are the sounds and notifications settings
just checked them and they all appeared to be ok, but i wend back in and changed my ring tone and then tried to change it back and it said
'this ring tone is not working properly, You may want to choose a different one to use.'
Very strange, so i am now using oldphone as my ring tone and it is working perfectly!, looks like one of my ring tones has got corrupted somehow
I had the same problem also
Fix by HARD RESET.
At that time I try to test many Phone edition program. (on XDA 1 2002).
After that everytime when I try to install some new program, I'll backup my data first.
so,i still waiting for chriswo,cos he knows this sort of bug...
Hi all,
Occasionally, when i activesync my phone stop working!
I can dial and speak and I know that the person on the other end of the phone can hear me but I cannot hear them! - (tested phoning myself)
I've tried everything to do with settings but I don't think it's anything in particular. I had reapplied the ROM 1.60WWE and this can fix the problem (whatever it is) sometimes. Currently I have reapplied it twice at this point in time to no satisfaction. Last week I applied it a few times and this did the trick!
Sound works everywhere else: ring, wav files etc but not incoming thru phone.
I have noticed a correlation that following an activesync that this has occurred however I'm still not certain it's this. activesync is crucial to how I use it so need all to work.
Does anyone have an idea or would you suggest I have it replaced?
Thanx in advance,
Chris.
Hey, I've been lurking these forums for a while but I thought I'd come on to ask a question. I tried asking on sprintmogul.net but they didn't really help.
I've had my mogul for a few months but lately it's been developing a really annoying problem. I'm really not sure where it started exactly so I can't blame any apps in particular. When I receive a call the caller ID / ring and vibrate go off perfectly - the problem happens when I try to answer the call. Generally one of three things happens:
1 - The call connects instantly and just works - this happens pretty rarely, I remember the last time it happened the person calling was also on Sprint, if that makes any difference.
2 - The phone will just sort of hang there for about 10 seconds, caller ID popup still there, the ring stops though. Eventually the popup disappears and I get a missed call notification, as if I never clicked the answer button. This is what usually happens.
3 - The phone hangs like in situation 2, but the call eventually connects. This only happens if I press answer almost immediately after the phone starts to ring.
I'm on winMo 6.1 with the latest radio and am not running any major mods or hacks, just a few reg edits. I'll probably try a hard reset soon but ideas on things to try would be appreciated!
I am seeing this also, on both my own xv6800 and my wife's. It's VERY annoying.
Hi all, tried searching for the topic but couldn't find anything so please bear with me
I have discovered that when receiving an incoming call, having set up a ringtone from the device, the first ring is sort of dodgy, like fading in and out. its hard to explain, but its like the volume gets high then low and so on.
however, after the first ring, the second and third appear to be with a stable volume.
can anyone help? and i have already set the ringing style to Ring not increasing.
your help is highly appreciated, thanks.
***
another problem i am having... i didnt really want to make a new thread.
its with the GPRS. I have set my email to check every 2 hours, and have used HDtweaks to make the gprs to disconnect after 1 minute. the problem is the GPRS almost always stays connected, and i have to disconnect it manually. I am only worried cause it drains alot of battery power i believe.
HELP!
alien79 said:
Hi all, tried searching for the topic but couldn't find anything so please bear with me
I have discovered that when receiving an incoming call, having set up a ringtone from the device, the first ring is sort of dodgy, like fading in and out. its hard to explain, but its like the volume gets high then low and so on.
however, after the first ring, the second and third appear to be with a stable volume.
can anyone help? and i have already set the ringing style to Ring not increasing.
your help is highly appreciated, thanks.
***
another problem i am having... i didnt really want to make a new thread.
its with the GPRS. I have set my email to check every 2 hours, and have used HDtweaks to make the gprs to disconnect after 1 minute. the problem is the GPRS almost always stays connected, and i have to disconnect it manually. I am only worried cause it drains alot of battery power i believe.
HELP!
Click to expand...
Click to collapse
Does this Ring problem happen with every ring tone you select?
As with GPRS HD Tweak should stop connection after it has detected the connection is no longer in use, check your settings in HD Tweak to make sure it is set and maybe try a few different selections of disconnect time.
Also try changing the email check too
Have you installed any other tweak programs?
cheers for the reply mate. the problem happens with every ringtone i select. Today i found something interesting, when i use SPB shell the problem with the ringing tone disappears! its there only on the touch flo, how wierd is that?!
about the gprs, i have tried many times, sometimes it disconnects and sometim it goes on and on until i disconnect it manually.
thanks for your help anyways
alien79 said:
cheers for the reply mate. the problem happens with every ringtone i select. Today i found something interesting, when i use SPB shell the problem with the ringing tone disappears! its there only on the touch flo, how wierd is that?!
about the gprs, i have tried many times, sometimes it disconnects and sometim it goes on and on until i disconnect it manually.
thanks for your help anyways
Click to expand...
Click to collapse
No problem
Sorry I couldnt help you out a bit more
You could always flash a new ROM
Careful though its very addictive
No worries mate, am glad you tried to help
I havent got into that ROM flashing yet...ehm, am still on the n00bish side lol
cheers again mate :insert thumbs up smiley here:
Lately I have had people telleing me they have called. But the phone showes no missed calls. Sometimes I also have calls from friend Ihave as contacts, but the sreen only keep showing Home-screen or just the locked screen.
Anyone with a similar problem and suggestions? I still run the 1.48.40.1 ROM - have had no reason for upgrade, until now??
Johan
Are you sure you have signal when they call, If there is no signal your phone wont show anything.
If you are having this problem when you have signal then I would suggest possibly a hard reset and see if that works.
You are right about the signal.
Problem is, to-day I had a call I didn't catch soon enough. It was ringing normally, but when finsihed, the phone showed no missed call, which it should have. So I had a clear "evidence" of some malfunction. But maybe I try a hard reset befor upgrading if no one else has other suggestions - seems a less fearful procedure...
do you have any mods installed like s2u2 or cht? or something similar that deals with calls or shows information on missed calls?
btw a hard reset will delete all your data so backup ( but dont use backups between rom versions)
not sure if this will help...but is your missed call notification disabled?
you can check in many ways, but the easiest is to go to the "Settings" tab in Sense...then choose "Sound & Display", then go into "Notification Sounds" under "Ring and Notifications" and make sure the "Missed call" option is set to "On".
Thanks a lot for the effort. Unfortunately, it was ON.. And it must be, if it does not turn itself on and off, then every other missed call does show up telling me so...